Fluorescent polythymidine-templated copper nanoclusters aptasensor for sensitive detection of tropomyosin in processed shrimp products

Tropomyosin (TM) is the main allergen in shellfish. Developing a novel, simple and accurate method to track and detect TM in food products is necessary. In this work, a label-free fluorescent aptasensor based on polythymidine (poly(T))-templated copper nanoclusters (CuNCs) was designed for sensitive detection of TM in processed shrimp products. Magnetic beads (MBs), aptamer and cDNA were used to construct an MBs-aptamer@cDNA complex as a detection probe, and with the presence of TM, the poly(T)-templated CuNCs attached at the end of the cDNA as the fluorescent signal was released from the complex to turn on the fluorescence. Under optimal conditions, the poly(T)-templated CuNCs aptasensor achieved a linear range from 0.1 to 50 μg/mL (R2 = 0.9980), a low limit of detection of 0.0489 μg/mL and an excellent recovery percentage of 105.29%-108.91% in the complex food matrix, providing a new approach for food safety assurance.

Coenzyme-catalyzed electroinitiated reversible addition fragmentation chain transfer polymerization for ultrasensitive electrochemical DNA detection

Ultrasensitive detection of biomarkers at an early stage is generally limited by external influence factors such as high reaction temperature, complex operations, and sophisticated instruments. Here, we circumvent these problems by using nicotinamide adenine dinucleotide (NAD⁺) to control electroinitiated reversible addition fragmentation chain transfer (electro-RAFT) polymerization for biosensing that enables the detection of a few molecules of target DNA. In this coenzyme-catalyzed electro-RAFT polymerization, numerous ferrocenylmethyl methacrylate (FCMMA) as monomer with electrochemistry signal were linked to the biomarker on Au electrode. Afterwards, a strong oxidation peak appears at the potential of about 0.3 V that represents a typical oxidation potential of FCMMA. The sensitivity of this methodology was presented by detecting DNA from 10^-1 to 10⁴ fM concentration and detection limit (LOD) being down to 4.39 aM in 10 μL samples. This is lower by factors than detection limits of most other ultra-sensitive electrochemical DNA assays.

Progress of metal nanoclusters in nucleic acid detection

The development and application of metal nanoclusters (MNCs) in nucleic acid testing in the past 10 years have been summarized. Fluorescence enhancement and red shift can occur when the G-rich sequence gets close to Ag NCs or the complementary DNA strand hybridizes with Ag NCs tail strand, which can be used to identify the nucleic acid. Ag NCs with the abasic site in DNA duplex can distinguish mutant genes such as cancer suppression gene p53. Ag NCs with auxiliary DNA can be used to detect miR-21, miR-16-5p, miR-19b-3p, and miR-141. Cu NCs/Cu NPs can recognize miRNA-155, miR-21, and miR-let-7d without auxiliary DNA. Au NCs can identify H1N1 gene fragments by fluorescence quenching caused by proximity to the G-rich sequence. Besides, Au NCs can recognize miRNA-21 and let-7a. SsDNA MNCs adsorbed on the surface of GO and CNPs oxide can be used to identify HBV and HIV gene fragments. The addition of enzymes or auxiliary amplification technologies is a popular way to improve probe sensitivity. Ag NCs combined with TAIEA has the best performance and can obtain LOD as low as aM for miRNA.

Intramolecular photoinitiator induced atom transfer radical polymerization for electrochemical DNA detection

A novel electrochemical biosensor was reported for the first time to achieve highly sensitive DNA detection based on photoinduced atom transfer radical polymerization (photoATRP). In this work, PNA was applied as the capture probe to specifically recognize the target DNA (TDNA), and we utilized lung cancer DNA as TDNA. The ATRP initiator was introduced to the electrode surface via phosphate-Zr4+-carboxylate chemistry. PhotoATRP was activated under blue light irradiation based on a photoinitiator I2959, which produced free radicals via homolytic cleavage. Subsequently, Cu2+ was reduced to Cu+ with the assistance of the free radicals, and numerous electroactive probes were grafted onto the electrode surface. Under optimal conditions, the limit of detection (LOD) of this method was 3.16 fM (S/N = 3, R2 = 0.992), and the linear range was from 10 fM to 1.0 nM. More importantly, the preparation process of this biosensor was simple and less laborious with a low background signal, suggesting good potential in practical applications.

Construction of a Novel Biosensor Based on the Self-assembly of Dual-Enzyme Cascade Amplification-Induced Copper Nanoparticles for Ultrasensitive Detection of MicroRNA153

MicroRNAs (miRNAs) have received extensive attention because of their potential as biomarkers for cancer diagnosis and monitoring, and their effective detection is very significant. Here, a specific, one-pot, rapid, femtomolar sensitive miRNAs detection biosensor was developed based on the target-triggered three-way junction (3-WJ) and terminal deoxynucleotide transferase (TDT)/Nt.BspQI in combination with activated copper nanoparticles (CuNPs) self-assembly. To this end, a 3-WJ hairpin probe and helper probe were designed to selectively identify the target miRNA, so as to form a stable 3-WJ structure that further triggered the double-enzyme cycling to produce poly T to activate the self-assembly of CuNPs. Based on the simplicity of CuNPs generation, the poly T template fluorescence CuNPs can detect the minimum detection limit of 1 fm within 1.75 h. In addition, the applicability of this method in complex samples was demonstrated by analyzing the whole-blood RNA extraction from Parkinson patients, consisting of the results of commercial miRNA kits. The developed strategy performs powerful implications for miRNA detection, which may be beneficial for the effective diagnostic assays and biological research of Parkinson's disease.

Novel enzymatic single-nucleotide modification of DNA oligomer: prevention of incessant incorporation of nucleotidyl transferase by ribonucleotide-borate complex

Terminal deoxynucleotidyl transferase (TdT), which mediates template-independent polymerization with low specificity for nucleotides, has been used for nucleotide extension of DNA oligomers. One concern is that it is difficult to control the number of incorporated nucleotides, which is a limitation on the use of TdT for single-nucleotide incorporation of DNA oligomers. Herein, we uncovered an interesting inhibitory effect on TdT when ribonucleotide substrates (rNTPs) were employed in a borate buffer. On the basis of unique inhibitory effects of the ribonucleotide-borate complex, we developed a novel enzymatic method for single-nucleotide incorporation of a DNA oligomer with a modified rNTP by TdT. Single-nucleotide incorporation of a DNA oligomer with various modified rNTPs containing an oxanine, biotin, aminoallyl or N6-propargyl group was achieved with a high yield. The 'TdT in rNTP-borate' method is quite simple and efficient for preparing a single-nucleotide modified DNA oligomer, which is useful for the design of functional DNA-based systems.

A Fluorescent Sensor Based on Reversible Addition-Fragmentation Chain Transfer Polymerization for the Early Diagnosis of Non-small Cell Lung Cancer

We propose a novel, ultrasensitive and low-cost sensor using reversible addition-fragmentation chain transfer (RAFT) polymerization as a signal amplification strategy for the detection of CYFRA 21-1 DNA fragment, a tumor marker of non-small cell lung carcinoma. The peptide nucleic acid (PNA) probes were firstly immobilized on magnetic beads (MBs) to capture the CYFRA 21-1 DNA specifically. After hybridization, CPAD was tethered to the hetero duplexes through carboxylate-Zr⁴⁺-phosphate chemistry. Subsequently, a number of fluorescent tags were introduced to the heteroduplexes through RAFT polymerization, leading to an amplification of the fluorescence signal. The sensor demonstrates a low limit of detection (LOD) of 0.02 fM. It has great selectivity with respect to base mismatch DNA, and high anti-interference ability in normal human serum. Overall findings of the study suggest that proposed sensor holds enormous potential to be used as a tool for the early-stage diagnosis of lung cancers.

Alkaline phosphatase determination via regulation of enzymatically generated poly(thymine) as a template for fluorescent copper nanoparticle formation

We propose a new fluorometric method for alkaline phosphatase (ALP) determination. This method is based on the regulation of enzymatically generated poly(thymine) for the preparation of copper nanoparticles (CuNPs). 2'-Deoxythymidine 5'-triphosphate (dTTP) serves as the source for polymerization mediated by terminal deoxynucleotidyl transferase (TdT). This process generates poly(thymine), which acts as the template for synthesis of fluorescent CuNPs. However, if ALP catalyzes the hydrolysis of dTTP, the TdT-mediated polymerization will be disabled. This prevents the formation of CuNPs and causes a drop in fluorescence. The findings were used to design a sensitive and selective fluorometric method for ALP determination. A linear response in the activity range from 0.1 to 20 U L^-1 and a limit of quantification of 0.3 U L^-1 were obtained. The results indicate that the proposed method can be successfully applied to ALP assay in spiked diluted serum. This demonstrates the method's reliability and practicability. Graphical abstract A fluoromoetric method for alkaline phosphatase assay has been developed based on regulation of enzymatically generated poly(thymine) as template for the formation of fluorescent CuNPs.

Progress in biosensor based on DNA-templated copper nanoparticles

During the last decades, by virtue of their unique physicochemical properties and potential application in microelectronics, biosensing and biomedicine, metal nanomaterials (MNs) have attracted great research interest and been highly developed. Deoxyribonucleic acid (DNA) is a particularly interesting ligand for templating bottom-up nanopreparation, by virtue of its excellent properties including nanosized geometry structure, programmable and artificial synthesis, DNA-metal ion interaction and powerful molecular recognition. DNA-templated copper nanoparticles (DNA-CuNPs) has been developed in recent years. Because of its advantages including simple and rapid preparation, high efficiency, MegaStokes shifting and low biological toxicity, DNA-CuNPs has been highly exploited for biochemical sensing from 2010, especially as a label-free detection manner, holding advantages in multiple analytical technologies including fluorescence, electrochemistry, surface plasmon resonance, inductively coupled plasma mass spectrometry and surface enhanced Raman spectroscopy. This review comprehensively tracks the preparation of DNA-CuNPs and its application in biosensing, and highlights the potential development and challenges regarding this field, aiming to promote the advance of this fertile research area.

A fluorescent aptasensor for ochratoxin A detection based on enzymatically generated copper nanoparticles with a polythymine scaffold

A fluorescence enhancement method is presented for the determination of ochratoxin A (OTA). The interaction of OTA with its aptamer causes structural changes which, in turn, change fluorescence of enzymatically generated polythymine-coated copper nanoparticles (CuNPs) (with excitation/emission maxima at 340/625 nm). The OTA-binding aptamer was immobilized on magnetic beads. When it binds OTA, it is partially released and exposes a region with a partly complimentary DNA strand (cDNA). After magnetic separation, the cDNA was employed as a primer to trigger the terminal deoxynucleotidyl transferase-mediated polymerization. This process generates polythymine which act as a template for synthesis of the CuNPs. The method is sensitive in having a 2.0 nM detection limit for OTA. It was successfully applied to the determination of OTA in spiked diluted red wine. Graphical abstract Schematic presentation of a fluorometric enhancement method for ochratoxin A assay based on ochratoxin A inducing structure switching of its aptamer and enzymatically generated polythymine for copper nanoparticles formation.

Recent advances in the synthesis and application of copper nanomaterials based on various DNA scaffolds

Fluorescent copper nanomaterials (CuNMs), including copper nanoparticles (CuNPs) and copper nanoclusters (CuNCs), become more and more popular with the abundant raw materials and low cost. A wide range of applications has been explored due to their fascinating properties such as low toxicity, remarkable water solubility, facile synthesis, large Stokes shifts, and good biocompatibility. As a kind of genetic material, DNA exhibits its molecular recognition function and diversity. The marriage between CuNMs and DNA endows DNA-templated CuNMs (DNA-CuNMs) with unique properties such as fluorescence, electrochemiluminescence and catalytic features. In this review, we summarize the synthesis and recent applications of DNA-CuNMs. Fluorescent CuNMs can be grown on various DNA scaffolds with special sequence design. T base plays an important role in the formation of CuNMs on DNA templates. These fluorescent DNA-CuNMs hold great prospect in logic gate construction, staining and biosensing of DNAs and RNAs, ions, proteins and enzymes, small molecules and so on.

Label-free and sensitive microRNA detection based on a target recycling amplification-integrated superlong poly(thymine)-hosted copper nanoparticle strategy

Poly(thymine)-hosted copper nanoparticles (poly T-CuNPs) have emerged as a promising label-free fluorophore for bioanalysis, but its application in RNA-related studies is still rarely explored. Herein, by utilizing duplex-specific nuclease (DSN) as a convertor to integrate target recycling mechanism into terminal deoxynucleotidyl transferase (TdT)-mediated superlong poly T-CuNPs platform, a specific and sensitive method for microRNA detection has been developed. In this strategy, a 3'-phosphorylated DNA probe can hybridize with target RNA and then be cut by DSN to produce 3'-hydroxylated fragments, which can be further tailed by TdT with superlong poly T for fluorescent CuNPs synthesis. As proof of concept, an analysis of let-7d was achieved with a good linear correlation between 20 and 1000 pM (R² = 0.9965) and a detection limit of 20 pM. Moreover, both homologous and heterologous microRNAs were also effectively discriminated. This strategy might pave a brand-new way for designing label-free and sensitive microRNA assays.

A sensitive detection method of carcinoembryonic antigen based on dsDNA-templated copper nanoparticles

A label-free fluorescence assay has been developed for the detection of carcinoembryonic antigen based on dsDNA-templated copper nanoparticles.

A Novel Detection Method of Human Serum Albumin Based on the Poly(Thymine)-Templated Copper Nanoparticles

In this work, we developed a facile fluorescence method for quantitative detection of human serum albumin (HSA) based on the inhibition of poly(thymine) (poly T)-templated copper nanoparticles (CuNPs) in the presence of HSA. Under normal circumstances, poly T-templated CuNPs can display strong fluorescence with excitation/emission peaks at 340/610 nm. However, in the presence of HSA, it will absorb cupric ion, which will prevent the formation of CuNPs. As a result, the fluorescence intensity will become obviously lower in the presence of HSA. The analyte HSA concentration had a proportional linear relationship with the fluorescence intensity of CuNPs. The detection limit for HSA was 8.2 × 10⁻⁸ mol·L⁻¹. Furthermore, it was also successfully employed to determine HSA in biological samples. Thus, this method has potential applications in point-of-care medical diagnosis and biomedical research.

Controlling Enzymatic Polymerization from Surfaces with Switchable Bioaffinity

The affinity of surfaces toward proteins is found to be a key parameter to govern the synthesis of polymer brushes by surface-initiated biocatalytic atom transfer radical polymerization (SI-bioATRP). While the "ATRPase" hemoglobin (Hb) stimulates only a relatively slow growth of protein repellent brushes, the synthesis of thermoresponsive grafts can be regulated by switching the polymer's attraction toward proteins across its lower critical solution temperature (LCST). Poly(N-isopropylacrylamide) (PNIPAM) brushes are synthesized in discrete steps of thickness at temperatures above LCST, while the biocatalyst layer is refreshed at T < LCST. Multistep surface-initiated biocatalytic ATRP demonstrates a high degree of control, results in high chain end group fidelity and enables the synthesis of multiblock copolymer brushes under fully aqueous conditions. The activity of Hb can be further modulated by tuning the accessibility of the heme pocket within the protein. Hence, the multistep polymerization is accelerated at acid pH, where the enzyme undergoes a transition from its native to a molten globule conformation. The controlled synthesis of polymer brushes by multistep SI-bioATRP highlights how a biocatalytic synthesis of grafted polymer films can be precisely controlled through the modulation of the polymer's interfacial physicochemical properties, in particular of the affinity of the surface toward proteins. This is not only of importance to gain a predictive understanding of surface-confined enzymatic polymerizations, but also represents a new way to translate bioadhesion into a controlled functionalization of materials.

Label-free and sensitive assay for deoxyribonuclease I activity based on enzymatically-polymerized superlong poly(thymine)-hosted fluorescent copper nanoparticles

Deoxyribonuclease I (DNase I) is an important physiological indicator and diagnostic biomarker, but traditional methods for assessing its activity are time-consuming, laborious, and usually radioactive. Herein, by effectively combining the special functions of DNase I and terminal deoxynucleotidyl transferase (TdT), a simple, green, cost-effective, label-free and ultrasensitive assay for DNase I activity has been constructed based on superlong poly(thymine)-hosted copper nanoparticles (poly T-CuNPs). In this strategy, a 3'-phosphorylated DNA primer is designed to block TdT polymerization. After addition of DNase I, the primer could be digested to release 3'-hydroxylated fragments, which could further be tailed by TdT in dTTP pool with superlong poly T ssDNA for CuNPs formation. Fluorescence measurements and gel electrophoresis demonstrated its feasibility for DNase I analysis. The results indicated that with a size of 3-4nm, the CuNPs templated by TdT-polymerized superlong poly T (>500 mer) had several advantages such as short synthetic time (<5min), large Stokes shift (~275nm) and intense red fluorescence emission. Under the optimal conditions, quantitative detection of DNase I was realized, showing a good linear correlation between 0.02 and 2.0U/mL (R²=0.9928) and a detection limit of 0.02U/mL. By selecting six other nucleases or proteins as controls, an excellent specificity was also verified. Then, the strategy was successfully applied to detect DNase I in diluted serum with a standard addition method, thus implying its reliability and practicability for biological samples. The proposed strategy might be promising as a sensing platform for related molecular biology and disease studies.

Cascade Signal Amplification Based on Copper Nanoparticle-Reported Rolling Circle Amplification for Ultrasensitive Electrochemical Detection of the Prostate Cancer Biomarker

An ultrasensitive and highly selective electrochemical assay was first attempted by combining the rolling circle amplification (RCA) reaction with poly(thymine)-templated copper nanoparticles (CuNPs) for cascade signal amplification. As proof of concept, prostate specific antigen (PSA) was selected as a model target. Using a gold nanoparticle (AuNP) as a carrier, we synthesized the primer-AuNP-aptamer bioconjugate for signal amplification by increasing the primer/aptamer ratio. The specific construction of primer-AuNP-aptamer/PSA/anti-PSA sandwich structure triggered the effective RCA reaction, in which thousands of tandem poly(thymine) repeats were generated and directly served as the specific templates for the subsequent CuNP formation. The signal readout was easily achieved by dissolving the RCA product-templated CuNPs and detecting the released copper ions with differential pulse stripping voltammetry. Because of the designed cascade signal amplification strategy, the newly developed method achieved a linear range of 0.05-500 fg/mL, with a remarkable detection limit of 0.020 ± 0.001 fg/mL PSA. Finally, the feasibility of the developed method for practical application was investigated by analyzing PSA in the real clinical human serum samples. The ultrasensitivity, specificity, convenience, and capability for analyzing the clinical samples demonstrate that this method has great potential for practical disease diagnosis applications.