Fabrication of covalent organic frameworks modified nanofibrous membrane for efficiently enriching and detecting the trace polychlorinated biphenyls in water

Enriching and detecting the trace pollutants in actual matrices are critical to evaluating the water quality. Herein, a novel nanofibrous membrane, named PAN-SiO₂@TpPa, was prepared by in situ growing β-ketoenamine-linked covalent organic frameworks (COF-TpPa) on the aminated polyacrylonitrile (PAN) nanofibers, and adopted for enriching the trace polychlorinated biphenyls (PCBs) in various natural water body (river, lake and sea water) through the solid-phase micro-extraction (SPME) process. The resulted nanofibrous membrane owned abundant functional groups (-NH-, -OH and aromatic groups), outstandingly thermal and chemical stability, and excellent ability in extracting PCBs congeners. Based on the SPME process, the PCBs congeners could be quantitatively analyzed by the traditional gas chromatography (GC) method, with the satisfactory linear relationship (R²>0.99), low detection limit (LODs, 0.1∼5 ng L^-1), high enrichment factors (EFs, 2714∼3949) and multiple recycling (>150 runs). Meanwhile, when PAN-SiO₂@TpPa was adopted in the real water samples, the low matrix effects on the enrichment of PCBs at both 5 and 50 ng L^-1 over PAN-SiO₂@TpPa membrane firmly revealed the feasibility of enriching the trace PCBs in real water. Besides, the related mechanism of extracting PCBs on PAN-SiO₂@TpPa mainly involved the synergistic effect of hydrophobic effect, π-π stacking and hydrogen bonding.

Cellulose Nanocrystals Induced Loose and Porous Graphite Phase Carbon Nitride/Porous Carbon Composites for Capturing and Determining of Organochlorine Pesticides from Water and Fruit Juice by Solid-Phase Microextraction

Herein, novel, loose, and porous graphite phase carbon nitride/porous carbon (g-C₃N₄@PC) composites were prepared by decorating cellulose nanocrystals (CNCs). The characterization results demonstrate that the as-prepared composites presented high specific surface areas, porous structures, and abundant chemical groups, with the modification of CNCs. In view of the unique advantages, g-C₃N₄@PC was used as the coating material for the solid-phase microextraction (SPME) of organochlorine pesticides (OCPs) in water and juice samples. The g-C₃N₄@PC-coated fibers showed better extraction efficiencies than commercial fibers (100/7 μm PDMS and PA) toward the OCPs, with the enrichment factors of the g-C₃N₄@PC-coated fibers 5-30 times higher than the latter. Using a gas chromatography-mass spectrometry (GC-MS) instrument, the g-C₃N₄@PC-coated fibers exhibited a gratifying analytical performance for determining low concentrations of OCPs, with a wide linear range (0.1-1600 ng L^-1 for water; 0.1-1000 ng L^-1 for juice), low limits of detection (0.0141-0.0942 ng L^-1 for water; 0.0245-0.0777 ng L^-1 for juice), and good reproducibility and repeatability in optimal conditions. The established method showed good sensitivity and recovery in the determination of OCPs in the water and fruit juice samples, which displayed broad prospects for analyzing organic pollutants from environmental samples.

A ternary deep eutectic solvent-modified magnetic mixed iron hydroxide@MIL-101(Cr)-NH2 composite as a sorbent in magnetic solid phase extraction of organochlorine pesticides prior to GC-MS

A green solvent of ternary deep eutectic solvent (menthol-thymol-dodecanoic acid) was prepared and used as a functional reagent to modify a magnetic mixed iron hydroxide@MIL-101(Cr)-NH₂ composite. The proposed sorbent (MIH@MIL-101(Cr)-NH₂-TDES) was applied in magnetic solid phase extraction (MSPE) for the enrichment of organochlorine pesticides. The analytes were quantitively analyzed by GC-MS. The relationships of experimental parameters for preparing the proposed sorbent and the MSPE method were studied through a Box-Behnken design and a central composite design, respectively. Their optimized conditions were investigated using response surface methodology. Application of the MIH@MIL-101(Cr)-NH₂-TDES sorbent in MSPE successfully enhanced the sensitivity of GC-MS analysis, giving enrichment factors in the range of 56-168. The MSPE/GC-MS method was developed using MIH@MIL-101(Cr)-NH₂-TDES as a sorbent and was successfully employed for the preconcentration/determination of organochlorine residues in honey and tea samples. The satisfactory detection limits were in the ranges of 0.07-0.80 ng g^-1 and 0.7-8.5 ng g^-1 for honey and tea samples, respectively. Acceptable recoveries were obtained in the ranges of 81.7-107.3% and 85.4-109.3% for the spiked honey and tea samples, respectively, with RSDs lower than 10.0%.

Ionic Liquid-Assisted DLLME and SPME for the Determination of Contaminants in Food Samples

Developing effective and green methods for food analysis and separation has become an urgent issue regarding the ever-increasing concern of food quality and safety. Ionic liquids (ILs) are a new chemical medium and soft functional material developed under the framework of green chemistry and possess many unique properties, such as low melting points, low-to-negligible vapor pressures, excellent solubility, structural designability and high thermal stability. Combining ILs with extraction techniques not only takes advantage of ILs but also overcomes the disadvantages of traditional extraction methods. This subject has attracted intensive research efforts recently. Here, we present a brief review of the current research status and latest developments regarding the application of IL-assisted microextraction, including dispersive liquid–liquid microextraction (DLLME) and solid-phase microextraction (SPME), in food analysis and separation. The practical applications of ILs in determining toxic and harmful substances in food specimens with quite different natures are summarized and discussed. The critical function of ILs and the advantages of IL-based microextraction techniques over conventional extraction techniques are discussed in detail. Additionally, the recovery of ILs using different approaches is also presented to comply with green analytical chemistry requirements.

Efficient extraction of trace organochlorine pesticides from environmental samples by a polyacrylonitrile electrospun nanofiber membrane modified with covalent organic framework

Detecting and analyzing of the trace organochlorine pesticides (OCPs) in the real water has become a big challenge. In this work, a novel functional electrospun nanofiber membrane (PAN@COFs) was synthesized through the in situ growth of covalent organic frameworks (COFs) on a polyacrylonitrile electrospun nanofiber membranes under room temperature and used in the solid-phase micro-extraction (SPME) to enrich trace organochlorine pesticides (OCPs) in water. The resulted PAN@COFs composite consisted of numerous nanofibers coated ample porous COFs spheres (~ 500 nm) and owned stable crystal structure, abundant functional groups, good stability. In addition, the enrichment experiments clearly revealed that PAN@COFs exhibited rather outstanding performance on adsorbing the trace OCPs (as low as 10 ng L^-1) with the enrichment of 482-2686 times. Besides, PAN@COFs displayed good reusability and could be reused 100 times. Notably, in the real water samples (sea water and river water), the high enrichment factors and recovery rates strongly confirmed the feasibility of PAN@COFs for detecting the trace OCPs. Furthermore, due to the synergy of π-π stacking interaction and hydrophobic interaction between the OCPs molecules and PAN@COFs, the OCPs could be efficiently adsorbed on PAN@COFs, even under the extremely low driving force.

Enrichment of IgG and HRP glycoprotein by dipeptide-based polymeric material

Separation, purification, and identification of glycoproteins are essential for understanding their vital roles in biological and pathological processes. However, glycoproteins are difficult to be captured due to their low abundance, strong interference from non-glycosylated proteins. Here, we report a promising dipeptide-based saccharide recognition platform to selectively enrich two typical glycoproteins, named immunoglobin G (IgG) and horseradish peroxidase (HRP). Different from the conventional glycoprotein enrichment method based on boronic acid affinity or hydrophilic interaction with glycans, the present method was established based on affinity between Pro-Glu (PE) dipeptide and mannose, which is a key unit in the pentasaccharide core of the IgG and HRP glycans. The prepared PE homopolymer surface was proved to selectively bind IgG and HRP superior to that of bovine serum albumin (BSA). Benefiting from this feature, selective enrichment of IgG and HRP was achieved from a protein mixture containing 200-fold BSA interference by using polyPE@SiO₂ under a dispersive solid-phase extraction (dSPE) mode. High adsorption capacity, controllable and selective adsorption behaviors, as well as satisfactory recovery demonstrated the high potential of the dipeptide-based polymeric material in IgG and HRP enrichment. This study might provide a new insight to solve the challenging problem of glycoprotein separation.

Application of β-Cyclodextrin metal-organic framework/titanium dioxide hybrid nanocomposite as dispersive solid-phase extraction adsorbent to organochlorine pesticide residues in honey samples

A simple and efficient dispersive solid-phase extraction (D-SPE) method combined with gas chromatography tandem mass spectrometry (GC-MS/MS) was developed to determine organochlorine pesticides (OCP) in honey. Firstly, a type of hybrid nanocomposite (CD-MOF/TiO₂) was prepared by grafting a metal-organic framework material synthesized with cyclodextrin as an organic ligand onto titanium dioxide. Then, the CD-MOF/TiO₂ was used as a D-SPE adsorbent to extract the OCP, and the effects of the amount of adsorbent, ultrasonic time, vortex time, pH, and salinity on the extraction were investigated using Plackett-Burman design and Box-Behnken Design. Under the optimized adsorption and desorption conditions, an analysis method that combined D-SPE with GC-MS/MS was established. The linear ranges of 14 OCP are 1-500 μg kg^-1 and the correlation coefficients are between 0.9991 and 1.000. The limits of detection and quantification vary from 0.01 to 0.04 μg kg^-1 and 0.04 to 0.12 μg kg^-1, respectively. The intra-day and inter-day precision of this method are suitable (RSDs% less than 11.3%). The established CD-MOF/TiO₂ / D-SPE method was used for the extraction of OCP in honey samples with recovery in the range of 76.4 to 114.3%. The results demonstrate that the CD-MOF/TiO₂ has a good selective enrichment ability for OCP and is suitable for the D-SPE pretreat of honey sample analysis.

Recent advances in porous organic frameworks for sample pretreatment of pesticide and veterinary drug residues: a review

Rapid and accurate detection of pesticide and veterinary drug residues is a continuing challenge because of the complex matrix effects. Thus, appropriate sample pretreatment is a crucial step for the effective extraction of the analytes and removal of the interferences. Recently, the development of nanomaterial adsorbents has greatly promoted the innovation of food sample pretreatment approaches. Porous organic frameworks (POFs), including polymers of intrinsic microporosity, covalent organic frameworks, hyper crosslinked polymers, conjugated microporous polymers, and porous aromatic frameworks, have been widely utilized due to their tailorable skeletons and pores as well as fascinating features. This review summarizes the recent advances for POFs to be utilized in adsorption and sample preparation of pesticide and veterinary drug residues. In addition, future prospects and challenges are discussed, hoping to offer a reference for further study on POFs in sample pretreatment.

Biological Application of Porous Aromatic Frameworks: State of the Art and Opportunities

Porous aromatic frameworks (PAFs) were first reported in 2009 and have quickly attracted much attention because of their exceptionally ultrahigh specific surface area (5800 m²·g^-1). Uniquely, PAFs are constructed from carbon-carbon-bond-linked aromatic-based building units, which render PAFs extremely stable in various environments. At present, PAFs have been applied in many fields, such as adsorption, catalysis, ion exchange, electrochemistry, and so on. However, for such a unique material, its application in the biological fields is still rarely explored. Therefore, this Perspective introduces the reported application of PAFs in biological fields, for instance, diagnosis and treatment of diseases, artificial enzymes, drug delivery, and extraction of bioactive substances. Major challenges and opportunities for future research on PAFs in biology and biomedicine are identified in diagnostic platforms, novel drug carriers/antidotes, and novel artificial enzymes.

[Recent developments of pesticide adsorbents based on cyclodextrins]

The invention and application of pesticides have greatly increased the yield of crops, greatly contributing to ensuring people's basic livelihoods and gradually improving their livelihoods to a well-off level. However, foods, water sources, and soil, containing high levels of pesticide residues, result in increasingly serious pollution. Pesticide residues usually have the characteristics of micro toxicity, difficult biodegradation, and bioaccumulation, and thus pose serious threat to living organisms and ecosystems. In recent years, pesticide pollution has earned worldwide focus. Thus, methods for the efficient detection of trace pesticides and reduction of the harm caused by pesticide pollution are urgently required. Researchers have used catalysis, electrochemistry, membrane separation, adsorption, and other methods to enrich pesticides from complex matrices. Among these, adsorbents have attracted much attention owing to their advantages of simple operation steps, rapid treatment process, and low amounts of organic solvents required. Research on adsorption materials has always been a very active field, and is also the key to the success of separation and enrichment of pesticides from complex matrices. Development of adsorbents with the advantages of simple synthesis, environment-friendliness, high stability, and strong reusability is of great significance. There has been some progress in the field of pesticide adsorption using supramolecular compounds. Cyclodextrin is a macrocyclic compound with a cavity after crown ether, which can form inclusion complexes via host guest interactions as the main body. Cyclodextrin can also be modified by etherification, esterification, oxidation, and other chemical reactions to improve its adsorption performance. Pesticides can be classified into organic and inorganic substances. One of the most widely used inorganic fungicides is the Bordeaux solution, whose main component is Cu²⁺. Organic fungicides, insecticides, herbicides, and plant growth regulators are basically organic molecules, whose hydroxyl and carboxyl groups can form complexes with Cu²⁺. As a matrix, cyclodextrin not only increases the surface area of the materials, but also provides the binding sites of hydroxyl and carboxyl groups, which guarantees efficient enrichment of Cu²⁺. Organic pesticides with high polarity, high electron density, and strong hydrophobicity could be better adsorbed. In this paper, the application of cyclodextrin-based adsorbents in pesticide adsorption was reviewed, and on this basis, reference to future development directions and application prospects were provided. The adsorption capacity of individual pesticide adsorbents based on cyclodextrin, as reviewed in this paper, is not high enough. Therefore, improving the adsorption capacity is currently a major research target. Some of the above-mentioned adsorbents have unclear degradation mechanisms and can easily cause secondary pollution. Therefore, the development of environment-friendly pesticide adsorbents that are easy to regenerate is a promising research direction for the future. After adsorption, some detection methods are used to determine whether the pesticide residues are up to the standard; however, the detection instruments are expensive. Therefore, the development of a combined detection mechanism that can reduce workload and cost is a promising research direction. Finally, the development of smart cyclodextrin-based adsorbents is also an efficient and rapid method to reduce the cost of detecting residual pesticide concentrations and the risk of pesticide pollution. For example, intelligent materials, whose color changes can be observed by the naked eye, not only adsorb pesticides, but also respond according to the concentration of residual pesticides.

Porous Aromatic Frameworks (PAFs)

Porous aromatic frameworks (PAFs) represent an important category of porous solids. PAFs possess rigid frameworks and exceptionally high surface areas, and, uniquely, they are constructed from carbon-carbon-bond-linked aromatic-based building units. Various functionalities can either originate from the intrinsic chemistry of their building units or are achieved by postmodification of the aromatic motifs using established reactions. Specially, the strong carbon-carbon bonding renders PAFs stable under harsh chemical treatments. Therefore, PAFs exhibit specificity in their chemistry and functionalities compared with conventional porous materials such as zeolites and metal organic frameworks. The unique features of PAFs render them being tolerant of severe environments and readily functionalized by harsh chemical treatments. The research field of PAFs has experienced rapid expansion over the past decade, and it is necessary to provide a comprehensive guide to the essential development of the field at this stage. Regarding research into PAFs, the synthesis, functionalization, and applications are the three most important topics. In this thematic review, the three topics are comprehensively explained and aptly exemplified to shed light on developments in the field. Current questions and a perspective outlook will be summarized.

Recent Applications and Newly Developed Strategies of Solid-Phase Microextraction in Contaminant Analysis: Through the Environment to Humans

The present review aims to describe the recent and most impactful applications in pollutant analysis using solid-phase microextraction (SPME) technology in environmental, food, and bio-clinical analysis. The covered papers were published in the last 5 years (2014–2019) thus providing the reader with information about the current state-of-the-art and the future potential directions of the research in pollutant monitoring using SPME. To this end, we revised the studies focused on the investigation of persistent organic pollutants (POPs), pesticides, and emerging pollutants (EPs) including personal care products (PPCPs), in different environmental, food, and bio-clinical matrices. We especially emphasized the role that SPME is having in contaminant surveys following the path that goes from the environment to humans passing through the food web. Besides, this review covers the last technological developments encompassing the use of novel extraction coatings (e.g., metal-organic frameworks, covalent organic frameworks, PDMS-overcoated fiber), geometries (e.g., Arrow-SPME, multiple monolithic fiber-SPME), approaches (e.g., vacuum and cold fiber SPME), and on-site devices. The applications of SPME hyphenated with ambient mass spectrometry have also been described.

Electroless deposition of silver nanofractals on copper wire by galvanic displacement as a simple technique for preparation of porous solid-phase microextraction fibers

A novel and porous solid-phase microextraction fiber was prepared by quick and simple galvanic displacement reaction and applied to the determination of some polycyclic aromatic hydrocarbons in sunflower oil. The parameters affecting the porosity and thickness of the fiber, and parameters affecting the extraction efficiency, including the extraction time, temperature, and ionic strength, were investigated and optimized. The morphology of prepared fiber was characterized by optical and scanning electron microscopy and thermal and chemical stabilities of the fiber were studied. Under the optimum conditions, the limits of detection ranged between 0.1 ng/mL for pyrene to 1.2 ng/mL for anthracene, and LOQ ranged between 0.3 ng/mL for pyrene to 3.6 ng/mL for anthracene. The relative standard deviations, including repeatability (within fibers) and reproducibility (between fibers), varied between 3.2-8.9 and 5.6-9.8%, respectively.

Smart polymers driven by multiple and tunable hydrogen bonds for intact phosphoprotein enrichment

Separation of phosphoproteins is essential for understanding their vital roles in biological processes and pathology. Transition metal-based receptors and antibodies, the routinely used materials for phosphoproteins enrichment, both suffer from low sensitivity, low recovery and coverage. In this work, a novel smart copolymer material was synthesized by modifying porous silica gel with a poly[(N-isopropylacrylamide-co-4-(3-acryloylthioureido) benzoic acid)0.35] (denoted as NIPAAm-co-ATBA0.35@SiO2). Driven by the hydrogen bonds complexation of ATBA monomers with phosphate groups, the copolymer-modified surface exhibited a remarkable adsorption toward native α-casein (a model phosphoprotein), accompanied with significant changes in surface viscoelasticity and roughness. Moreover, this adsorption was tunable and critically dependent on the polarity of carrier solvent. Benefiting from these features, selective enrichment of phosphoprotein was obtained using NIPAAm-co-ATBA0.35@SiO2 under a dispersive solid-phase extraction (dSPE) mode. This result displays a good potential of smart polymeric materials in phosphoprotein enrichment, which may facilitate top-down phosphoproteomics studies.

A hybrid triazine-imine core-shell magnetic covalent organic polymer for analysis of pesticides in fruit samples by ultra high performance liquid chromatography with tandem mass spectrometry

A novel hybrid triazine-imine core-shell magnetic covalent organic polymer with high adsorption capacity and excellent stability was fabricated by surface-assisted in situ growth technique. The composite possesses porous and extended π-conjugated system, and was applied as the magnetic sorbent for efficient enrichment and rapid separation of pesticides. A new analytical method for simultaneous determination of eight pesticides in fruit samples was developed by magnetic solid phase extraction combined with ultra high performance liquid chromatography and tandem mass spectrometry. The effect of extraction time, desorption time, and the type of desorption solvent on the extraction efficiency were evaluated. The established method shows good repeatability and high sensitivity. The repeatability of this method was estimated with relative standard deviations in the range of 0.7-7.0% (n = 5) for the same batch, and 1.7-10% (n = 3) for batch to batch. Good linearity for eight pesticides was obtained with coefficient of determination in the range of 0.9942-0.9990. Limit of detections ranged from 0.4 to 1.2 ng/L. Real sample determination showed that four and two pesticides were detected in strawberry and grape, respectively. The results demonstrated that the established method was efficient, sensitive, and convenient for trace determination of pesticides in fruit samples.

Efficient enrichment of triazole fungicides from fruit and vegetable samples by a spherical porous aromatic framework

A porous aromatic framework was synthesized and utilized as a novel SPME coating for efficient enrichment of triazole fungicides.

Synthesis of nanoporous poly-melamine-formaldehyde (PMF) based on Schiff base chemistry as a highly efficient adsorbent

This study proposes the construction of nanoporous poly-melamine-formaldehyde (PMF) through the Schiff base condensation reaction of paraformaldehyde and melamine. The PMF nanoparticles showed a good adsorption capability to some benzene-ring-containing dyes including acid fuchsine, nigrosine, and methyl orange. Moreover, the as-prepared PMF nanoparticles were employed as the coating adsorbent for the solid-phase microextraction (SPME) of seven volatile fatty acids (VFAs) with high enrichment factors. A PMF-assisted SPME method was established for the enrichment of VFAs from environmental water samples with satisfactory recoveries (88.5%-102.0%) and acceptable precisions (relative standard deviations <10.9%). This contribution might furnish an advanced benchmark for the exploitation of new porous organic polymers as the effective adsorbents for SPME or other fields of utilization.

Porous Organic Frameworks: Advanced Materials in Analytical Chemistry

Porous organic frameworks (POFs), a general term for covalent-organic frameworks (COFs), covalent triazine frameworks (CTFs), porous aromatic frameworks (PAFs), etc., are constructed from organic building monomers with strong covalent bonds and have generated great interest among researchers. The remarkable features, such as large surface areas, permanent porosity, high thermal and chemical stability, and convenient functionalization, promote the great potential of POFs in diverse applications. A critical overview of the important development in the design and synthesis of COFs, CTFs, and PAFs is provided and their state-of-the-art applications in analytical chemistry are discussed. POFs and their functional composites have been explored as advanced materials in "turn-off" or "turn-on" fluorescence detection and novel stationary phases for chromatographic separation, as well as a promising adsorbent for sample preparation methods. In addition, the prospects for the synthesis and utilization of POFs in analytical chemistry are also presented. These prospects can offer an outlook and reference for further study of the applications of POFs.

Microextraction of polycyclic aromatic hydrocarbons by using a stainless steel fiber coated with nanoparticles made from a porous aromatic framework

A porous aromatic framework of type PAF-6 was synthesized and explored as a coating onto a steel wire for using in solid-phase microextraction of polycyclic aromatic hydrocarbons (PAHs), phthalate plasticizers, and n-alkanes. The extraction temperature, extraction time, salt concentration, agitation speed, desorption temperature, and desorption time were optimized. This method for SPME resulted in the enrichment factors ranging from 122 to 1090 for PAHs (naphthalene, acenaphthene, fluorene, phenanthrene, anthracene, fluoranthene, pyrene), from 122 to 271 for plasticizers (diisobutyl phthalate, dibutyl phthalate, benzyl butyl phthalate, dicyclohexyl phthalate), and from 9 to 113 for n-alkanes (n-undecane, n-dodecane, n-tridecane, n-tetradecane, n-pentadecane, n-hexadecane, n-octadecane and n-eicosane). The good extraction of the PAHs is assumed to be due to their π-stacking interaction and hydrophobic effect. The PAF-6 coated fibers are durable and can be reused more than 100 times without significant loss of extraction performance. In combination with GC-MS detection, the method has limits of detection in the range from 0.8 to 4.2 ng L^-1 in case of PAHs. The relative standard deviations for five replicate determinations of the PAHs by using one fiber are in the range from 5.2 to 8.5%. When using different fibers, they range from 7.1 to 9.6%. The recoveries of PAHs from water samples at a spiking level of 20 ng L^-1 are in the range from 89.5 to 103.1%, with relative standard deviations ranging from 4.0 to 9.3%. Graphical abstract A porous aromatic framework of type PAF-6 was synthesized and used as a novel coating for the solid-phase microextraction of polycyclic aromatic hydrocarbons prior to their determination by gas chromatography with mass spectrometric detection.