Preconcentration and speciation analysis of mercury: 3D printed metal scavenger-based solid-phase extraction followed by analysis with inductively coupled plasma mass spectrometry

A selective method for preconcentration and determination of methylmercury (MeHg) and inorganic mercury (iHg) in natural water samples at the ng L^-1 level has been developed. The method involves adsorption of Hg species into a 3D printed metal scavenger and sequential elution with acidic thiourea solutions before ICP-MS determination. Experimental parameters affecting the preconcentration of MeHg and iHg such as the sample matrix, effect of the flow rate on adsorption, eluent composition, and elution mode have been studied in detail. The obtained method detection limits, considering the preconcentration factors of 42 and 93, were found to be 0.05 ng L^-1 and 0.08 ng L^-1 for MeHg and iHg, respectively. The accuracy of the method was assessed with a certified groundwater reference material ERM-CA615 (certified total iHg concentration 37 ± 4 ng L^-1). The determined MeHg concentration was below MDL while iHg concentration was determined to be 41.2 ± 0.5 ng L^-1. Both MeHg and iHg were also spiked to natural water samples at 5 ng L^-1 concentration and favorable spiking recoveries of 88-97% were obtained. The speciation procedure was successfully applied to two lake water samples where MeHg and iHg concentrations ranged from 0.18 to 0.24 ng L^-1 and 0.50-0.62 ng L^-1, respectively. The results obtained demonstrate that the developed 3D printed metal scavenger-based method for preconcentration and speciation of Hg is simple and sensitive for the determination of Hg species at an ultra-trace level in water samples.

Colorimetric determination of Hg2+ based on the mercury-stimulated oxidase mimetic activity of Ag3PO4 microcubes

Four kinds of Ag₃PO₄ materials were prepared by controlling the experimental conditions, which were developed as oxidase mimics. Experimental results showed that different synthesis methods led to distinct crystal structures, morphologies, and surface properties, which contributed to diverse oxidase-like activities of Ag₃PO₄ materials. Among them, Ag₃PO₄ microcubes (APMCs) can efficiently catalyze the oxidation of colorless 3,3',5,5'-tetramethylbenzidine in the presence of dissolved oxygen to form a blue-colored oxide, presenting the best intrinsic oxidase mimetic ability. The higher-energy [110] facets with more oxygen vacancies exposed and more active sites coupled with more negative charge and larger specific surface area of APMCs contributed to its enhanced oxidase mimetic performance. Besides, mercury ions were proved to remarkably and selectively stimulate the oxidase-like ability of APMCs owing to the formation of Ag-Hg amalgam on its surface. Based on the stimulating effect of Hg²⁺ towards APMCs, a simple and rapid method for colorimetric determination of Hg²⁺ was thus established via the significant signal amplification and megascopic color variation. Under the optimal conditions, the sensing system showed a good linear relationship ranging from 0.1 to 7.0 μM and a detection limit of 20 nM for Hg²⁺, exhibiting high selectivity and good colour stability. Moreover, the colorimetric method was successfully applied to determine Hg²⁺ in real water samples. Considering these advantages, the developed colorimetric sensing system is expected to hold bright prospects for trace determination of Hg²⁺ in biological, environmental, and food samples. Graphical abstract The preparation process of Ag₃PO₄ materials and Hg²⁺-stimulated enhanced oxidase-like ability of Ag₃PO₄ microcubes in catalyzing the oxidation of TMB to generate a typical blue color, which can be applied in rapid and ultrasensitive detection of Hg²⁺ visually.

A visual Hg2+ detection strategy based on distance as readout by G-quadruplex DNAzyme on microfluidic paper

In this work, we have developed a simple, fast and visual Hg²⁺ detection strategy based on distance as readout on paper chip by the Hg²⁺-mediated formation of G-quadruplex-hemin DNAzymes. In the presence of Hg²⁺, the two oligonucleotides hybridize to form G-quadruplex DNA by T-Hg²⁺-T base pair, which was able to bind hemin to form the catalytically active G-quadruplex-hemin DNAzymes. Once DNAzymes were added to react with the precipitated 3,3,5,5-tetramethyl benzidine (TMB) immobilized on the sample area, a visible color band was produced, and the formed length was positively correlated with the concentration of Hg²⁺. This biosensor is capable of selectively detecting mercuric ions with good reproducibility and satisfactory dynamic range. The limit of detection was low to 0.23 nM. Therefore, this strategy not only provides a visual and quick screen of Hg²⁺, but also shows a promising future in monitoring analysis of other metal ions in POC diagnostic field.

Enzyme-Like Properties of Gold Clusters for Biomedical Application

In recent years, the rapid development of nanoscience and technology has provided a new opportunity for the development and preparation of new inorganic enzymes. Nanozyme is a new generation of artificial mimetic enzyme, which like natural enzymes, can efficiently catalyze the substrate of enzyme under mild conditions, exhibiting catalytic efficiency, and enzymatic reaction kinetics similar to natural enzymes. However, nanozymes exist better stability than native enzymes, it can still maintain 85 % catalytic activity in strong acid and alkali (pH 2~10) or large temperature range (4~90°C). This provides conditions for designing complex catalytic systems. In this review, we discussed the enzymatic attributes and biomedical applications of gold nanoclusters, including peroxidase-like, catalase-like, detection of heavy metal ions, and therapy of brain and cancer etc. This review can help us understand the current research status nanozymes.

Functionalized Electrospun Nanofibers as Colorimetric Sensory Probe for Mercury Detection: A Review

Mercury is considered the most hazardous pollutant of aquatic resources; it exerts numerous adverse effects on environmental and human health. To date, significant progress has been made in employing a variety of nanomaterials for the colorimetric detection of mercury ions. Electrospun nanofibers exhibit several beneficial features, including a large surface area, porous nature, and easy functionalization; thus, providing several opportunities to encapsulate a variety of functional materials for sensing applications with enhanced sensitivity and selectivity, and a fast response. In this review, several examples of electrospun nanofiber-based sensing platforms devised by utilizing the two foremost approaches, namely, direct incorporation and surface decoration envisioned for detection of mercury ions are provided. We believe these examples provide sufficient evidence for the potential use and progress of electrospun nanofibers toward colorimetric sensing of mercury ions. Furthermore, the summary of the review is focused on providing an insight into the future directions of designing electrospun nanofiber-based, metal ion colorimetric sensors for practical applications.

Ratiometric fluorescent nanosensors for ultra-sensitive detection of mercury ions based on AuNCs/MOFs

Ratiometric fluorescent nanosensors were developed to detect mercury ions (Hg²⁺) using enhanced dual emissions from glutathione stabilized gold nanoclusters/indium-based metal–organic frameworks modified with cysteine (AuNCs/MIL-68(In)-NH₂/Cys).

A novel and ultrasensitive yellow to taupe brown colorimetric sensing and removal method for Hg(ii) based on the thermosensitive poly(N-isopropyl acrylamide) stabilized silver nanoparticles

AgNP/PNIPAm was developed as a dual-functional colorimetric probe and removal system for Hg²⁺.

Mix-&-Read Determination of Mercury(II) at Trace Levels with Hybrid Mesoporous Silica Materials Incorporating Fluorescent Probes by a Simple Mix-&-Load Technique

The synthesis, characterization, and application of mesoporous materials containing boron-dipyrromethene (BODIPY) moieties that allow the sensitive and selective detection of HgII in aqueous environments by fluorescence enhancement is reported. For this purpose, BODIPY dye I containing a thia-aza crown ether receptor as the fluorescent probe for the detection of HgII in aqueous environments is encapsulated into mesoporous materials to avoid self-quenching or aggregation in water. Determination of HgII is accomplished within a few seconds with high selectivity and sensitivity, reaching a limit of detection of 12 ppt. The determination of trace amounts of HgII in natural waters and in fish extracts is demonstrated by using our sensing material. The incorporation of the material into several μ-PAD strips yields a portable, cheap, quick, and easy-to-handle tool for trace HgII analysis in water.

Sensitive Colorimetric Hg2+ Detection via Amalgamation-Mediated Shape Transition of Gold Nanostars

Reliable and sensitive methods to monitor mercury levels in real samples are highly important for environment protection and human health. Herein, a label-free colorimetric sensor for Hg²⁺ quantitation using gold nanostar (GNS) has been demonstrated, based on the formation of Au-Hg amalgamate that leads to shape-evolution of the GNS and changes in its absorbance. Addition of ascorbic acid (AA) to GNS solution is important for quantitation of Hg²⁺, mainly because it can reduce Hg²⁺ to Hg to enhance amalgamation on the GNSs and stabilize GNSs. In addition to transmission electron microscopy images, the distribution of circular ratios of GNSs in the presence of 2 mM AA and various concentrations of Hg²⁺ are used to show the morphology changes of the GNSs. Upon increasing the concentration of Hg²⁺, the average circular ratio of GNSs decreases, proving GNS is approaching to sphere. The morphology change alters the longitudinal localized surface plasmonic resonance (LSPR) absorbance of the GNSs significantly. Under the optimum conditions, our sensor exhibits a dynamic response for Hg²⁺ in the range of 1–4,000 nM with a detection limit of 0.24 nM. Upon Increasing Hg²⁺ concentration, the solution color changes from greenish-blue, purple to red, which can be distinguished by the naked eye when the Hg²⁺ concentration is higher than 250 nM. Owing to having a high surface-to-volume ratio and affinity toward Hg⁰, the GNS is sensitive and selective (at least 50-fold over tested metal ions like Pb²⁺) toward Hg²⁺ in the presence of AA. Practicality of this assay has been validated by the analysis of water samples without conducting tedious sample pretreatment.

Anthracene-Based Highly Selective and Sensitive Fluorescent "Turn-on" Chemodosimeter for Hg2

Three π-extended anthracene-bearing thioacetals (1-3) have been synthesized, and their fluorescence "turn-on" responses to Hg2+ ions are studied. The chemodosimetric fluorescence-sensing behavior and their resulting hydrolysis via a desulfurization reaction mechanism leads to the formation of highly fluorescent respective aldehyde substitutions. Furthermore, this mechanism was supported by increase in the quantum yields of their resulting aldehydes and is correlated to their molecular substitution. The chemosensors 1-3 have exhibited to be promising receptors toward Hg2+ ions in the presence of other competitive metal ions. Moreover, the detection limits of 1-3 have been found to be in the nanomolar range (94, 59, and 235, respectively). Fluorescence microscopic imaging studies show that 1-2 have been found to be effective for fluorescence imaging in live cells. Moreover, compounds 1-3 act as potential candidates for the detection of Hg2+ in environmental and biological systems as well as real samples.

Mix-&-Read Determination of Mercury(II) at Trace Levels with Hybrid Mesoporous Silica Materials Incorporating Fluorescent Probes by a Simple Mix-&-Load Technique

The synthesis, characterization, and application of mesoporous materials containing boron-dipyrromethene (BODIPY) moieties that allow the sensitive and selective detection of HgII in aqueous environments by fluorescence enhancement is reported. For this purpose, BODIPY dye I containing a thia-aza crown ether receptor as the fluorescent probe for the detection of HgII in aqueous environments is encapsulated into mesoporous materials to avoid self-quenching or aggregation in water. Determination of HgII is accomplished within a few seconds with high selectivity and sensitivity, reaching a limit of detection of 12 ppt. The determination of trace amounts of HgII in natural waters and in fish extracts is demonstrated by using our sensing material. The incorporation of the material into several μ-PAD strips yields a portable, cheap, quick, and easy-to-handle tool for trace HgII analysis in water.

Microfluidic chip for droplet-based AuNP synthesis with dielectric barrier discharge plasma and on-chip mercury ion detection

This study presents a novel microfluidic chip that can achieve on-demand gold nanoparticle (AuNP) synthesis using atmospheric pressure helium plasma and on-site mercury ion detection. Instead of using conventional chemical reaction methods, this chip uses helium plasma as the reducing agent to reduce gold ions and to synthesize AuNP, such that there is no residual reducing agent in the solution after removing the external electric field for plasma generation. The plasma discharge, gas–liquid separation, liquid collection and mercury ion detection can be achieved by this proposed microfluidic chip. The synthesized gold nanoparticles are further functionalized by 3-mercaptopropionic acid (3-MPA) for mercury ion detection. The 3-MPA-capped gold nanoparticles aggregate and result in a colour change of the solution due to the existence of Hg²⁺. The absorption spectra of the solution shifts from red to blue due to the cluster aggregation. The concentration of Hg²⁺ can be quantitatively determined by UV-Vis spectrometry, and the limit of detection was found to be 10⁻⁶ M (0.2 ppm). This developed integrated microfluidic device provides a simple and on-demand method for synthesis of AuNPs and Hg²⁺ detection in a single chip.

This study presents a novel microfluidic chip that can achieve on-demand gold nanoparticle (AuNP) synthesis using atmospheric pressure helium plasma and on-site mercury ion detection.

The mechanism and application of the protein-stabilized gold nanocluster sensing system

This review highlights sensing systems based on protein-Au NCs for the detection of various analytes and the corresponding sensing mechanisms.