Gold nanoparticles as colorimetric probes in food analysis: Progress and challenges

The rapid, sensitive and reliable food safety control is urgently needed due to the harmful effects of the food contaminants on human health. Colorimetric approach has exhibited promising potential for the detection of food contaminants due to their easy preparation, rapid detection, high sensitivity, and naked-eye sensing. In recent years, AuNPs-based colorimetric probes have been extensively explored for food analysis. The present article reviews the development of AuNPs-based colorimetric probes for colorimetric sensing and their applications in food analysis. It generally summarizes the properties of AuNPs and introduces the preparation and functionalization methods of AuNPs. An overview of the colorimetric sensing mechanisms of AuNPs-based probes and their applications in analysis of food contaminants are also provided. Although AuNPs-based colorimetric probes show many advantages in detection of food contaminants, challenges remain in terms of complexity of food matrices, multiple analytes detection in a single go, and testing conditions interference.

Plasmonic nanoparticle etching-based optical sensors: current status and future prospects

Plasmonic nanoparticles are an emerging tool for developing label-free multicolorimetric sensors for biosensing and chemosensing applications. The color absorbed by nanoparticles from visible light is influenced by their size, shape, orientation, and interparticle distance. Differently sized and shaped gold and silver nanoparticles exhibit a wide range of colors, aiding in the development of label-free sensors. Etching is the process of oxidizing nanoparticles, which alters their aspect ratio, shape, plasmonic peak, and outward appearance. It is typically used to create sensitive sensing platforms. Through etching, analytes could be detected in a simple, sensitive, and selective manner. The multicolor readout of nanoparticle etching-based multicolorimetric sensors can overcome the limitations of conventional colorimetric assays and improve the accuracy of visual inspection. This review discusses different approaches for target sensing using nanoparticle etching strategies like direct etching, enzyme-mediated etching, chemical reaction-driven etching, and anti-etching-based sensors and their mechanisms. In the future, etching strategies could be modified into portable sensing devices to detect a variety of analytes, which will aid in the development of on-time, in situ, and point-of-care sensing systems.

Innovative Real-Time Flow Sensor Using Detergent-Free Complex Emulsions with Dual-Emissive Semi-Perfluoroalkyl Substituted Α-Cyanostilbene

In this study, the potential of complex emulsions is investigated as transducers in sensing applications. Complex emulsions are stabilized without external detergents by developing a novel α-cyanostilbene substituted with PEG and semi-perfluoroalkyl chain (CNFCPEG). CNFCPEG exhibits unique variable emission properties depending on its aggregation state, allowing dual blue and green emissions in complex emulsions with hydrocarbon-in-fluorocarbon-in-water (H/F/W) morphology. The green excimer emissions result from the self-assembly of CNFCPEG at the fluorocarbon/water interface, while the blue emission observed is due to aggregation in the organic phase. A novel flow-injection method is developed by incorporating complex emulsions with CNFCPEG into multiple-well flow chips (MWFC). Iodine is successfully detected in a mobile aqueous solution by monitoring morphology changes. The findings demonstrate that self-stabilized complex emulsions with MWFC hold great promise for real-time sensing without costly instruments.

Colorimetric and visual determination of iodide ions via morphology transition of gold nanobipyramids

The gold nanobipyramids (Au NBPs) are widely used in the analytical detection of biochemistry due to their unique localized surface plasmon resonance (LSPR) properties. In our developed approach, I^- in kelp was detected by etching Au NBPs in the presence of IO₃^-. Under acidic conditions, IO₃^- reacted rapidly with I^- to form I₂, subsequently I₂ reacted with I^- to form the intermediate I₃^-. In the presence of CTAB, Au NBPs were etched by I₂ derived from I₃^-, resulting in a decrease in the aspect ratio of Au NBPs, to form a significant blue shift of LSPR longitudinal peak and color variation of colloid which changed from blue-green to magenta and could be employed to quantitatively detect the concentration of I^- with the naked eye. A linear relationship can be found between the LSPR peak changes with the I^- concentration in a wide range from 4.0 μM to 15.0 μM, and the sensitive limit of detection (LOD) was 0.2 μM for UV-vis spectroscopy and the obvious color changes with a visual LOD was 4.0 μM for the naked eye. Benefiting from the high specificity, the proposed colorimetric detection of I^- in kelp samples was achieved, indicating the available potential of the colorimetric detection for the determination of I^- in real samples. What's more, this detection procedure was time-saving and could avoid tedious procedures.

Highly sensitive colorimetric assay for penconazole using gold nanostar-graphene quantum dot composite

In this study, a simple and sensitive colorimetric method for penconazole sensing is reported. It is based on the etching/anti-etching strategy in which gold nanostar@graphene quantum dot (AuNS@GQD) nanocomposite acts as a sensing nanoprobe and IO₄^- as an etching agent. With adding IO₄^- to the solution of AuNSs@GQDs, the sharp tips of NSs are etched and they are transformed into nearly spherical nanostructures, and the color of the solution changes from green to violet. These changes can be attributed to the oxidation of gold atoms at the sharp corners and tips of NSs with I₂, produced by the reaction of IO₄^- with AuNS@GQD solution. When penconazole is added into the system, the color and shape variations of AuNSs caused by periodate are impressively prevented. It can be assigned to the strong binding affinity between nitrogen atoms of penconazole and gold atoms, which protects them from etching by I₂. This mechanism has been affirmed via transmission electron microscopy (TEM) and UV-Vis spectra. This approach exhibited a good linear relationship (R² = 0.999) between the wavelength shift and penconazole concentration in the range of 5.0-1000.0 nM with a limit of detection (LOD) of 1.5 nM. The sensor is stable and reproducible and was used to measure penconazole in spiked water samples with recoveries over 97%.

Shape dependent sensing potential of gold nanoparticles in etching based multicolorimetric plasmonic-ELISA

In the present study, a systematic investigation has been carried out for the first time to assess the potential of three different shapes of gold nanoparticles (AuNPs), viz. nanorods (AuNRs), nanotriangles (AuNTs), and nanospheres (AuNSs), to develop a horseradish peroxidase (HRP) enzyme-mediated etching-based plasmonic ELISA (p-ELISA) strategy. The etching of the AuNPs in ELISA is achieved by 3'-3-5'-5-tetramethylbenzidine (TMB²⁺), which is produced by the biocatalytic conversion of chromogenic TMB via HRP. All three types of AuNPs were interacted with varying concentrations of TMB²⁺ (7-131 μM) (product of HRP enzyme reaction) and characterized for visible color change and by UV-Vis spectroscopy and transmission electron microscopy (TEM). From the comparative analysis of all three shapes of AuNPs, AuNRs exhibited vivid visible color change and absorbance intensity change compared to spherical and triangle-shaped nanoparticles. The TEM analysis of the etched nanoparticles revealed the gradual etching pattern of AuNRs compared to AuNTs which resulted in multicolor generation as opposed to AuNTs where the etching was relatively very fast and thus shows a faster shape transformation and poor color discrimination. Further, the potential of the AuNR etching-based optimized strategy was successfully demonstrated to develop an indirect competitive p-ELISA for human IgG detection. The developed p-ELISA showed an ultra-low visual limit of detection of 1 fg mL^-1 (∼6.54 aM) without the aid of any sophisticated instruments. In the future, the developed competitive p-ELISA strategy can be easily employed to develop cost-effective, portable, and point-of-care assays for the detection of various disease biomarkers with ultra-high sensitivity.

An Overview on Coinage Metal Nanocluster-Based Luminescent Biosensors via Etching Chemistry

The findings from the synthetic mechanism of metal nanoclusters yield the etching chemistry based on coinage metal nanoclusters. The utilization of such chemistry as a tool that can alter the optical properties of metal nanoclusters has inspired the development of a series of emerging luminescent biosensors. Compared with other sensors, the luminescent biosensors have the advantages of being more sensitive, saving time and saving cost. We reviewed topics on the luminescent sensors based on the etching of emissive coinage metal nanoclusters. The molecules possessing varied etching ability towards metal nanoclusters were categorized with discussions of corresponding etching mechanisms. The understanding of etching mechanisms favored the discussions of how to use etching methods to detecting biochemical molecules. The emerging luminescent biosensors via etching chemistry also provided challenges and new opportunities for analytical chemistry and sensors.

Waterproof Cellulose-Based Substrates for In-Drop Plasmonic Colorimetric Sensing of Volatiles: Application to Acid-Labile Sulfide Determination in Waters

The present work reports on the assessment of widely available waterproof cellulose-based substrates for the development of sensitive in-drop plasmonic sensing approaches. The applicability of three inexpensive substrates, namely, Whatman 1PS, polyethylene-coated filter paper, and tracing paper, as holders for microvolumes of colloidal solutions was evaluated. Waterproof cellulose-based substrates demonstrated to be highly convenient platforms for analytical purposes, as they enabled in situ generation of volatiles and syringeless drop exposure unlike conventional single-drop microextraction approaches and can behave as sample compartments for smartphone-based colorimetric sensing in an integrated way. Remarkably, large drop volumes (≥20 μL) of colloidal solutions can be employed for enrichment processes when using Whatman 1PS as holder. In addition, the stability and potential applicability of spherical, rod-shaped, and core-shell metallic NPs onto waterproof cellulose-based substrates was evaluated. In particular, Au@AgNPs showed potential for the colorimetric detection of in situ generated H₂S, I₂, and Br₂, whereas AuNRs hold promise for I₂, Br₂, and Hg⁰ colorimetric sensing. As a proof of concept, a smartphone-based colorimetric assay for determination of acid-labile sulfide in environmental water samples was developed with the proposed approach taking advantage of the ability of Au@AgNPs for H₂S sensing. The assay showed a limit of detection of 0.46 μM and a repeatability of 4.4% (N = 8), yielding satisfactory recoveries (91-107%) when applied to the analysis of environmental waters.

Unveiling the Actual Catalytic Sites in Nanozyme-Catalyzed Oxidation of o-Phenylenediamine

Nanozymes have offered remarkable advantages over natural enzymes and found widespread applications including biosensors, immunoassays, nanomedicines, and environmental remediation. Oxidation of o-phenylenediamine (OPD) by nanozymes has been listed as a standard protocol for determining nanozyme activities. Given the complexity of OPD oxidation processes, however, the mechanism of nanozyme-catalyzed oxidation of OPD remains elusive. In this report, mechanistic studies of nanozyme-catalyzed oxidation of OPD are performed and a distinguishably different mechanism from that of natural enzymes is found. A combination of Fourier transform infrared spectroscopy, nuclear magnetic resonance, electrospray ionization mass spectrometry, and electron microscopic studies provides compelling evidence that polymerization of OPD occurs on the surface of several different nanozymes. The unexpected polymerization causes a dense coating layer of poly(o-phenylenediamine) (POPD) on nanozymes renders the intrinsic properties of nanozymes. Therefore, this fundamental discovery raise serious concerns using OPD-based colorimetric method for determining nanozyme activities. Without examining the surface change of nanozymes after catalytic reactions, the use of OPD-based colorimetric method for determining nanozyme activities is strongly discouraged. Furthermore, POPD is discovered as a new oxidase mimic, and this new mechanism also provides a general and robust method to coat nanomaterials with POPD polymers of enzyme-mimicking properties.

The studies on wet chemical etching via in situ liquid cell TEM

Wet chemical etching is a widely used process to fabricate fascinating nanomaterials, such as nanoparticles with precisely controlled size and shape. Understanding the etching mechanism and kinetic evolution process is crucial for controlling wet chemical etching. The development of in situ liquid cell transmission electron microscopy (LCTEM) enables the study on wet chemical etching with high temporal and spatial resolutions. However, there still lack a detailed literature review on the wet chemical etching studies by in situ LCTEM. In this review, we summarize the studies on wet etching nanoparticles, one-dimensional nanomaterials and nanoribbons by in situ LCTEM, including etching rate, anisotropic etching, morphology evolution process, and etching mechanism. The challenges and opportunities of in situ LCTEM are also discussed.

Ultrasensitive Visual Detection of Glucose in Urine Based on the Iodide-Promoted Etching of Gold Bipyramids

Blood glucose monitoring is an essential but painful component of diabetes management, so it is urgent to develop simple, convenient, and noninvasive glucose monitoring methods as alternatives. Because the glucose level in urine is directly related to the blood glucose, urine can be an alternative for blood glucose monitoring. Herein, we report the development of a new and highly sensitive noninvasive colorimetric assay to detect the glucose content in urine samples using gold bipyramids (GBPs). The principle of this method is to utilize hydrogen peroxide (H₂O₂), the oxidation product of glucose, to etch GBPs, where the urine glucose will be quantified based on the displacement of the absorption peak of GBPs. The unique morphology (sharp tips) and etching mechanism (from tips) of GBPs determine the high sensitivity of this assay. Under optimal conditions, this colorimetric assay shows a dynamic range of 0.5-250 μM and a detection limit of 0.34 μM for artificial urine samples. This detection capability is ideal when sample dilution is necessary. Another advantage is that the color change of the GBP solution in this assay is convenient for the visual readout of the urine glucose semiquantitatively by the naked eye. Furthermore, it has been demonstrated here that the iodide ion has the horseradish peroxidase (HRP) activity and can be used alone to promote the reduction reaction of H₂O₂, which eliminates the use of HRP enzymes, simplifies the reaction, and reduces costs. The role of iodide ions has been studied and mainly attributed as a catalyst with I₂ as the reaction intermediate, which reduced the activation energy for the reduction of H₂O₂.

Thiol-suppressed I2-etching of AuNRs: acetylcholinesterase-mediated colorimetric detection of organophosphorus pesticides

For the first time it is demonstrated that sulfhydryl compounds can suppress longitudinal etching of gold nanorods via consuming oxidizers, which provides a new signaling mechanism for colorimetric sensing. As a proof of concept, a colorimetric assay is developed for detecting organophosphorus pesticides, which are most widely used in modern agriculture to improve food production but with high toxicity to animals and the ecological environment. Triazophos was selected as a model organophosphorus pesticide. In the absence of triazophos, the active acetylcholinesterase can catalyze the conversion of acetylthiocholine iodide to thiocholine whose thiol group can suppress the I₂-induced etching of gold nanorods. When triazophos is present, the activity of AchE is inhibited, and I₂-induced etching of gold nanorods results in triazophos concentration-dependent color change from brown to blue, pink, and red. The aspect ratio of gold nanorods reduced with gradually blue-shifted longitudinal absorption. There was a linear detection range from 0 to 117 nM (R² = 0.9908), the detection limit was 4.69 nM, and a good application potential was demonstrated by the assay of real water samples. This method will not only contribute to public monitoring of organophosphorus pesticides but also has verified a new signaling mechanism which will open up a new path to develop colorimetric detection methods. It has been first found that sulfhydryl compounds can suppress longitudinal etching of gold nanorods (AuNRs) via consuming oxidizers, which provides a new signaling mechanism for colorimetric sensing. As a proof of concept, a colorimetric assay is developed for sensitively detecting organophosphorus pesticides (OPs). It will not only contribute to public monitoring of OPs but also has verified a new signaling mechanism which will open up a new path to develop multicolor colorimetric methods.

Sequential colorimetric sensing of cupric and mercuric ions by regulating the etching process of triangular gold nanoplates

A triangular gold nanoplate (AuNPL)-based colorimetric assay is presented for ultrasensitive determination of cupric ions (Cu²⁺⁾ and mercuric ions (Hg²⁺) in sequence. AuNPLs were found to be etched efficiently when producing triiodide ions (I₃^-) by a redox reaction between Cu²⁺ and iodide ions (I^-), leading to a change of the shape of AuNPLs from triangular to sphere along with a color change from blue to pink. In the presence of Hg²⁺ the etching of AuNPLs was suppressed due to the consumption of I^- by the formation of HgI₂. With an increase of the concentration of the Hg²⁺ a transformation from sphere to triangular in the shape of AuNPLs occurred with a color change from pink to blue. The evolution of AuNPLs from etching to anti-etching state by sequential addition of Cu²⁺ and Hg²⁺ was accompanied with color variations and band shifts of localized surface plasmon resonance (LSPR), allowing for visual and spectroscopic determination of Cu²⁺ and Hg²⁺ successively within 15 min. In the range 0.01-1.5 μM for Cu²⁺ and 0.02-3.0 μM for Hg²⁺, the linear relationship between the band shift values and the target ions concentration was found good (R² > 0.996). The limit of detections (3S/k) was 19 nM for Cu²⁺ and 9 nM for Hg²⁺, respectively. The lowest visual estimation concentration was 80 nM for both Cu²⁺ and Hg²⁺ through the distinguishable color changes. This system exhibited desirable selectivity for Cu²⁺ and Hg²⁺ over other common ions tested. The method has been successfully applied to sequential determination of Cu²⁺ and Hg²⁺ in real water and food samples. Graphical abstract Scheme 1 Schematic illustration for sequential detection of Cu²⁺ and Hg²⁺ based on etching of AuNPLs.

Comparative study of serum sample preparation methods in aggregation-based plasmonic sensing

The use of nanoparticle-based colorimetric methods has received considerable attention for clinical analysis in biofluids. Sample preparation methods are surveyed here to minimize the impact of the sample matrix on the performance of a nanoparticle aggregation assay.

Developing a new colorimetric bioassay for iodide determination based on gold supported iridium peroxidase catalysts

A schematic sketch of the colorimetric bioassay for iodide determination based on gold supported iridium peroxidase catalysts.

Are plasmonic optical biosensors ready for use in point-of-need applications?

Plasmonics has drawn significant attention in the area of biosensors for decades due to the unique optical properties of plasmonic resonant nanostructures. While the sensitivity and specificity of molecular detection relies significantly on the resonance conditions, significant attention has been dedicated to the design, fabrication, and optimization of plasmonic substrates. The adequate choice of materials, structures, and functionality goes hand in hand with a fundamental understanding of plasmonics to enable the development of practical biosensors that can be deployed in real life situations. Here we provide a brief review of plasmonic biosensors detailing most recent developments and applications. Besides metals, novel plasmonic materials such as graphene are highlighted. Sensors based on Surface Plasmon Resonance (SPR), Localized Surface Plasmon Resonance (LSPR), and Surface Enhanced Raman Spectroscopy (SERS) are presented and classified based on their materials and structure. In addition, most recent applications to environment monitoring, health diagnosis, and food safety are presented. Potential problems related to the implementation in such applications are discussed and an outlook is presented.

Review of Dissolved Oxygen Detection Technology: From Laboratory Analysis to Online Intelligent Detection

Dissolved oxygen is an important index to evaluate water quality, and its concentration is of great significance in industrial production, environmental monitoring, aquaculture, food production, and other fields. As its change is a continuous dynamic process, the dissolved oxygen concentration needs to be accurately measured in real time. In this paper, the principles, main applications, advantages, and disadvantages of iodometric titration, electrochemical detection, and optical detection, which are commonly used dissolved oxygen detection methods, are systematically analyzed and summarized. The detection mechanisms and materials of electrochemical and optical detection methods are examined and reviewed. Because external environmental factors readily cause interferences in dissolved oxygen detection, the traditional detection methods cannot adequately meet the accuracy, real-time, stability, and other measurement requirements; thus, it is urgent to use intelligent methods to make up for these deficiencies. This paper studies the application of intelligent technology in intelligent signal transfer processing, digital signal processing, and the real-time dynamic adaptive compensation and correction of dissolved oxygen sensors. The combined application of optical detection technology, new fluorescence-sensitive materials, and intelligent technology is the focus of future research on dissolved oxygen sensors.

Gold Nanoparticle-Based Colorimetric Strategies for Chemical and Biological Sensing Applications

Gold nanoparticles are popularly used in biological and chemical sensors and their applications owing to their fascinating chemical, optical, and catalytic properties. Particularly, the use of gold nanoparticles is widespread in colorimetric assays because of their simple, cost-effective fabrication, and ease of use. More importantly, the gold nanoparticle sensor response is a visual change in color, which allows easy interpretation of results. Therefore, many studies of gold nanoparticle-based colorimetric methods have been reported, and some review articles published over the past years. Most reviews focus exclusively on a single gold nanoparticle-based colorimetric technique for one analyte of interest. In this review, we focus on the current developments in different colorimetric assay designs for the sensing of various chemical and biological samples. We summarize and classify the sensing strategies and mechanism analyses of gold nanoparticle-based detection. Additionally, typical examples of recently developed gold nanoparticle-based colorimetric methods and their applications in the detection of various analytes are presented and discussed comprehensively.

Label-free gold nanorod-based plasmonic sensing of arsenic(iii) in contaminated water

An efficient label-free strategy for arsenic(iii) sensing in water through the suppression of iron(iii)-catalyzed oxidative shortening of gold nanorods.

A novel dual response ratiometric fluorescent probe for the determination of H2O2 and glucose via etching of silver nanoparticles

Based on the inner filter effect and charge transfer, a dual response ratiometric fluorescence assay for sensing H₂O₂ and glucose was proposed based on etching of Ag NPs.

An l-cysteine-mediated iodide-catalyzed reaction for the detection of I−

In this study, a highly selective and eco-friendly fluorescent sensor consisting of upconversion (UCNPs) and gold nanoparticles (AuNPs) was developed for the detection of iodide (I⁻).

Colorimetric Determination of Hypochlorite Based on the Oxidative Leaching of Gold Nanorods

Hypochlorite plays a critical role in killing microorganisms in the water. However, it can also cause cardiovascular diseases, neuron degeneration, and cancer to humans. Although traditional methods feature excellent sensitivity and reliability in detecting hypochlorite, the expensive instruments and strict determination conditions have limited their application in environmental analysis to some extent. Thus, it is necessary and urgent to propose a cheap, facile, and quick analytical assay for hypochlorite. This paper proposes a colorimetric assay for hypochlorite utilizing gold nanorods (AuNRs) as the nanoreactor and color reader. The AuNRs were acquired via a reported seed-mediated method. NaClO with strong oxidation property can cause the etching of gold from the longitudinal tips of AuNRs, which could shorten the aspect ratio of AuNRs, decrease the absorption in the UV–Vis spectrum and also induce the solution color changing from red to pale yellow. Thus, according to the solution color change and the absorbance of longitudinal surface plasmon resonance of AuNRs, we established the calibration curve of NaClO within 0.08 μM to 125 μM (∆Abs = 0.0547 + 0.004 C_NaClO, R² = 0.9631). Compared to traditional method, we obtained the conversion formula between the concentration of residual-chlorine in tap water and the concentration of hypochlorite detected by the proposed colorimetric assay, which is C_{residual-chlorine} = 0.24 C_NaClO. Finally, the real application of the colorimetric assay in tap water was successfully performed, and the accuracy of the colorimetric method can reach from −6.78% to +8.53%.

The Many "Facets" of Halide Ions in the Chemistry of Colloidal Inorganic Nanocrystals

Over the years, scientists have identified various synthetic "handles" while developing wet chemical protocols for achieving a high level of shape and compositional complexity in colloidal nanomaterials. Halide ions have emerged as one such handle which serve as important surface active species that regulate nanocrystal (NC) growth and concomitant physicochemical properties. Halide ions affect the NC growth kinetics through several means, including selective binding on crystal facets, complexation with the precursors, and oxidative etching. On the other hand, their presence on the surfaces of semiconducting NCs stimulates interesting changes in the intrinsic electronic structure and interparticle communication in the NC solids eventually assembled from them. Then again, halide ions also induce optoelectronic tunability in NCs where they form part of the core, through sheer composition variation. In this review, we describe these roles of halide ions in the growth of nanostructures and the physical changes introduced by them and thereafter demonstrate the commonality of these effects across different classes of nanomaterials.

Enzyme-catalyzed Ag Growth on Au Nanoparticle-assembled Structure for Highly Sensitive Colorimetric Immunoassay

We have developed a sensitive colorimetric immunoassay with broad dynamic range using enzyme-catalyzed Ag growth on gold nanoparticle (NP)-assembled silica (SiO2@Au@Ag). To reduce Ag+ ion content and promote Ag growth on the assembled Au NPs, alkaline phosphatase (AP)-based enzymatic amplification was incorporated, which considerably increased the colorimetric read-out. As a model study, sandwich enzyme-linked immunosorbent assay (ELISA) was used to quantify target IgG. The immune complexes capture the Ab-IgG-AP-labeled detection Ab and trigger the enzyme-catalyzed reaction to convert 2-phospho-L-ascorbic acid to ascorbic acid in the presence of the target IgG. Ascorbic acid reduced Ag+ to Ag, which formed Ag shells on the surface of SiO2@Au and enhanced the absorbance of the SiO2@Au@Ag solution. Plasmonic immunoassay showed a significant linear relationship between absorbance and the logarithm of IgG concentration in the range of ca. 7 × 10-13 M to 7 × 10-11 M. The detection limit was at 1.4 × 10-13 M, which is several hundred folds higher than that of any conventional colorimetric immunoassay. Thus, our novel approach of signal-amplification can be used for highly sensitive in vitro diagnostics and detection of target proteins with the naked eye without using any sophisticated instrument.

Oxygen sensitive polymeric nanocapsules for optical dissolved oxygen sensors

Immobilization of the oxygen-sensitive probes (OSPs) in the host matrix greatly impacts the performance and long-term usage of the optical dissolved oxygen (DO) sensors. In this work, fluorescent dyes, as the OSPs, were encapsulated with a crosslinked fluorinated polymer shell by interfacial confined reversible addition fragmentation chain transfer miniemulsion polymerization to fabricate oxygen sensitive polymeric nanocapsules (NCs). The location of fluorescent dyes and the fluorescent properties of the NCs were fully characterized by fourier transform infrared spectrometer, x-ray photoelectron spectrometer and fluorescent spectrum. Dye-encapsulated capacity can be precisely tuned from 0 to 1.3 wt% without self-quenching of the fluorescent dye. The crosslinked fluorinated polymer shell is not only extremely high gas permeability, but also prevents the fluorescent dyes from leakage in aqueous as well as in various organic solvents, such as ethanol, acetone and tetrahydrofuran (THF). An optical DO sensor based on the oxygen sensitive NCs was fabricated, showing high sensitivity, short response time, full reversibility, and long-term operational stability of online monitoring DO. The sensitivity of the optical DO sensor is 7.02 (the ratio of the response value in fully deoxygenated and saturated oxygenated water) in the range 0.96-14.16 mg l^-1 and the response time is about 14.3 s. The sensor's work curve was fit well using the modified Stern-Volmer equation by two-site model, and its response values are hardly affected by pH ranging from 2 to 12 and keep constant during continuous measurement for 3 months. It is believed that the oxygen sensitive polymeric NCs-based optical DO sensor could be particularly useful in long-term online DO monitoring in both aqueous and organic solvent systems.

Fluorescent sensing of ascorbic acid based on iodine induced oxidative etching and aggregation of lysozyme-templated silver nanoclusters

In this work, we developed a sensitive and highly selective fluorescent approach for the detection of ascorbic acid (AA) by taking advantage of the oxidative etching effect of iodine (I₂) on the lysozyme-stabilized silver nanoclusters (dLys-AgNCs) with fluorescence quenching. I₂ could be produced from the redox reaction between iodate (IO₃^-) and AA, and thus the fluorescence intensity of dLys-AgNCs was turned off significantly in the coexistence of IO₃^- and AA. The fluorescence quenching of dLys-AgNCs had a good linear relationship with AA concentration, which allowed the detection of AA in the range from 0.05 to 45.0 μmol L^-1 with a detection limit of 20 nmol L^-1. The quenching mechanism was elucidated by Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), zeta potential, and dynamic light scattering (DLS) measurements, confirming that the fluorescence quenching of the dLys-AgNCs was attributed to the oxidative etching of the in situ generated I₂, inducing aggregation of the dLys-AgNCs probe by forming Ag@AgI nanocomposite. The dLys-AgNCs probe exhibited excellent selectivity for AA sensing over several common reducing agents tested. Moreover, this approach was extended to the detection of AA in orange juice and urine with recovery rates in the range of 96.0% (RSD: 4.11) to 100.9% (RSD: 3.28) and 94.5% (RSD: 6.40) to 99.2% (RSD: 5.36), respectively.

Plasmon-Based Colorimetric Nanosensors for Ultrasensitive Molecular Diagnostics

Colorimetric detection of target analytes with high specificity and sensitivity is of fundamental importance to clinical and personalized point-of-care diagnostics. Because of their extraordinary optical properties, plasmonic nanomaterials have been introduced into colorimetric sensing systems, which provide significantly improved sensitivity in various biosensing applications. Here we review the recent progress on these plasmonic nanoparticles-based colorimetric nanosensors for ultrasensitive molecular diagnostics. According to their different colorimetric signal generation mechanisms, these plasmonic nanosensors are classified into two categories: (1) interparticle distance-dependent colorimetric assay based on target-induced forming cross-linking assembly/aggregate of plasmonic nanoparticles; and (2) size/morphology-dependent colorimetric assay by target-controlled growth/etching of the plasmonic nanoparticles. The sensing fundamentals and cutting-edge applications will be provided for each of them, particularly focusing on signal generation and/or amplification mechanisms that realize ultrasensitive molecular detection. Finally, we also discuss the challenge and give our future perspective in this emerging field.

Size and shape regulated synthesis of silver nanocapsules for highly selective and sensitive ultralow bivalent copper ion sensor application

The development of highly robust, quantitative, sensitive and naked eye colorimetric sensing of bivalent copper ions using bio-inspired synthesis of size and shape controlled silver nanocapsules (AgNCs) is reported herein.

Catalytic Reduction of 4-Nitrophenol: A Quantitative Assessment of the Role of Dissolved Oxygen in Determining the Induction Time

The reduction of 4-nitrophenol to 4-aminophenol by borohydride is one of the foremost model catalytic reactions because it allows for a straightforward assessment of catalysts using the kinetic parameters extracted from the real-time spectroscopic monitoring of an aqueous solution. Crucial to its standing as a model reaction is a comprehensive mechanistic framework able to explain the entire time evolution of the reaction. While much of this framework is in place, there is still much debate over the cause of the induction period, an initial time interval where no reaction seemingly occurs. Here, we report on the simultaneous monitoring of the spectroscopic signal and the dissolved oxygen content within the aqueous solution. It reveals that the induction period is the time interval required for the level of dissolved oxygen to fall below a critical value that is dependent upon whether Au, Ag, or Pd nanoparticles are used as the catalyst. With this understanding, we are able to exert complete control over the induction period, being able to eliminate it, extend it indefinitely, or even induce multiple induction periods over the course of a single reaction. Moreover, we have determined that the reaction product, 4-aminophenol, in the presence of the same catalyst reacts with dissolved oxygen to form 4-nitrophenolate. The implication of these results is that the induction period relates, not to some activation of the catalyst, but to a time interval where the reaction product is being rapidly transformed back into a reactant by a side reaction.