Surface modification of strontium-doped porous bioactive ceramic scaffolds via poly(DOPA) coating and immobilizing silk fibroin for excellent angiogenic and osteogenic properties

Efforts to promote osteogenesis-angiogenesis coupling for bone tissue engineering

Repair of bone defects exceeding a critical size has been always a big challenge in clinical practice. Tissue engineering has exhibited great potential to effectively repair the defects with less adverse effect than traditional bone grafts, during which how to induce vascularized bone formation has been recognized as a critical issue. Therefore, recently many studies have been launched to attempt to promote osteogenesis-angiogenesis coupling. This review summarized comprehensively and explored in depth current efforts to ameliorate the coupling of osteogenesis and angiogenesis from four aspects, namely the optimization of scaffold components, modification of scaffold structures, loading strategies for bioactive substances, and employment tricks for appropriate cells. Especially, the advantages and the possible reasons for every strategy, as well as the challenges, were elaborated. Furthermore, some promising research directions were proposed based on an in-depth analysis of the current research. This paper will hopefully spark new ideas and approaches for more efficiently boosting new vascularized bone formations.

Angiogenesis in bone tissue engineering via ceramic scaffolds: A review of concepts and recent advancements

Due to organ donor shortages, long transplant waitlists, and the complications/limitations associated with auto and allotransplantation, biomaterials and tissue-engineered models are gaining attention as feasible alternatives for replacing and reconstructing damaged organs and tissues. Among various tissue engineering applications, bone tissue engineering has become a promising strategy to replace or repair damaged bone. We aimed to provide an overview of bioactive ceramic scaffolds in bone tissue engineering, focusing on angiogenesis and the effect of different biofunctionalization strategies. Different routes to angiogenesis, including chemical induction through signaling molecules immobilized covalently or non-covalently, in situ secretion of angiogenic growth factors, and the degradation of inorganic scaffolds, are described. Physical induction mechanisms are also discussed, followed by a review of methods for fabricating bioactive ceramic scaffolds via microfabrication methods, such as photolithography and 3D printing. Finally, the strengths and weaknesses of the commonly used methodologies and future directions are discussed.

Application of silk fibroin coatings for biomaterial surface modification: a silk road for biomedicine

Silk fibroin (SF) as a natural biopolymer has become a popular material for biomedical applications due to its minimal immunogenicity, tunable biodegradability, and high biocompatibility. Nowadays, various techniques have been developed for the applications of SF in bioengineering. Most of the literature reviews focus on the SF-based biomaterials and their different forms of applications such as films, hydrogels, and scaffolds. SF is also valuable as a coating on other substrate materials for biomedicine; however, there are few reviews related to SF-coated biomaterials. Thus, in this review, we focused on the surface modification of biomaterials using SF coatings, demonstrated their various preparation methods on substrate materials, and introduced the latest procedures. The diverse applications of SF coatings for biomedicine are discussed, including bone, ligament, skin, mucosa, and nerve regeneration, and dental implant surface modification. SF coating is conducive to inducing cell adhesion and migration, promoting hydroxyapatite (HA) deposition and matrix mineralization, and inhibiting the Notch signaling pathway, making it a promising strategy for bone regeneration. In addition, SF-coated composite scaffolds can be considered prospective candidates for ligament regeneration after injury. SF coating has been proven to enhance the mechanical properties of the substrate material, and render integral stability to the dressing material during the regeneration of skin and mucosa. Moreover, SF coating is a potential strategy to accelerate nerve regeneration due to its dielectric properties, mechanical flexibility, and angiogenesis promotion effect. In addition, SF coating is an effective and popular means for dental implant surface modification to promote osteogenesis around implants made of different materials. Thus, this review can be of great benefit for further improvements in SF-coated biomaterials, and will undoubtedly contribute to clinical transformation in the future.

Research on essential performance of oxidized chitosan-crosslinked acellular porcine aorta modified with bioactive SCPP/DOPA for esophageal scaffold with enhanced mechanical strength, biocompatibility and anti-inflammatory

Acellular porcine aorta (APA) is an excellent candidate for an implanted scaffold but needs to be modified with appropriate cross-linking agent to increase its mechanical property and storage time in vitro as well as to give itself some bioactivities and eliminate its antigenicity for acting as a novel esophageal prosthesis. In this paper, a polysaccharide crosslinker (oxidized chitosan, OCS) was prepared by oxidizing chitosan using NaIO₄ and further used to fix APA to prepare a novel esophageal prosthesis (scaffold). And then the surface modification with dopamine (DOPA) and strontium-doped calcium polyphosphate (SCPP) were performed one after another to prepare DOPA/OCS-APA and SCPP-DOPA/OCS-APA to improve the biocompatibility and inhibit inflammation of the scaffolds. The results showed that the OCS with a feeding ratio of 1.5:1.0 and a reaction time of 24 h had a suitable molecular weight and oxidation degree, almost no cytotoxicity and good cross-linking effect. Compared with glutaraldehyde (GA) and genipin (GP), OCS-fixed APA could provide a more suitable microenvironment for cell proliferation. The vital cross-linking characteristics and cytocompatibility of SCPP-DOPA/OCS-APA were evaluated. Results suggested that SCPP-DOPA/OCS-APA exhibited suitable mechanical properties, excellent resistance to enzymatic degradation/acid degradation, suitable hydrophilicity, and the ability to promote the proliferation of Human normal esophageal epithelial cells (HEECs) and inhibit inflammation in vitro. In vivo tests also confirmed that SCPP-DOPA/OCS-APA could diminish the immunological response to samples and had a positive impact on bioactivity and anti-inflammatory. In conclusion, SCPP-DOPA/OCS-APA could act as an effective, bioactive artificial esophageal scaffold and be expected to be used for clinical in the future.

Enhanced osteogenesis and angiogenesis of biphasic calcium phosphate scaffold by synergistic effect of silk fibroin coating and zinc doping

Biphasic calcium phosphate (BCP) scaffold has been widely applied to bone regeneration because of its good biocompatibility and bone conduction property. However, the low mechanical strength and the lack of angiogenic and osteogenic induction properties have restricted its application in bone tissue regeneration. In this study, we combined zinc (Zn²⁺) doping and silk fibroin (SF) coating with expectation to enhance compressive strength, osteogenesis and angiogenesis of BCP scaffolds. The phase composition, morphology, porosity, compressive strength, in vitro degradation and cell behaviors were investigated systematically. Results showed that the scaffold coated with SF exhibited almost 3 times of compressive strength without compromising its porosity compared with the uncoated scaffold. Zn²⁺ doping and SF coating synergistically enhanced the alkaline phosphatase activity and osteogenesis-related genes expression of mouse bone mesenchymal stem cells (mBMSCs). Furthermore, SF coating notably improved the proliferation, cell viability and in vitro angiogenesis of human umbilical vein endothelial cells (HUVECs). This work provides a novel way to modify BCP scaffolds simultaneously with enhancing mechanical strength and biological properties.

Injectable thermosensitive chitosan/gelatin hydrogel for dental pulp stem cells proliferation and differentiation

Introduction: Biocompatible and biodegradable scaffolds based on natural polymers such as gelatin and chitosan (CS) provide suitable microenvironments in dental tissue engineering. In the present study, we report on the synthesis of injectable thermosensitive hydrogel (PNIPAAm-g-CS copolymer/gelatin hybrid hydrogel) for osteogenic differentiation of human dental pulp stem cells (hDPSCs). Methods: The CS-g-PNIPAAm was synthesized using the reaction of carboxyl terminated PNIPAAm with CS, which was then mixed with various amounts of gelatin solution in the presence of genipin as a chemical crosslinker to gain a homogenous solution. The chemical composition and microstructures of the fabricated hydrogels were confirmed by FT-IR and SEM analysis, respectively. To evaluate the mechanical properties (e.g., storage and loss modulus of the gels), the rheological analysis was considered. Calcium deposition and ALP activity of DPSCs were carried out using alizarin red staining and ALP test. While the live/dead assay was performed to study its toxicity, the real-time PCR was conducted to investigate the osteogenic differentiation of hDPSCs cultured on prepared hydrogels. Results: The hydrogels with higher gelatin incorporation showed a slightly looser network compared to the other ones. The hydrogel with less gelatin indicates a rather higher value of G', indicating a higher elasticity due to more crosslinking reaction of amine groups of CS via a covalent bond with genipin. All the hydrogels contained viable cells with negligible dead cells, indicating the high biocompatibility of the prepared hydrogels for hDPSCs. The quantitative results of alizarin red staining displayed a significant rise in calcium deposition in hDPSCs cultured on prepared hydrogels after 21 days. Further, hDPSCs cultured on hydrogel with more gelatin displayed the most ALP activity. The expression of late osteogenic genes such as OCN and BMP-2 were respectively 6 and 4 times higher on the hydrogel with more gelatin than the control group after 21 days. Conclusion: The prepared PNIPAAm-g-CS copolymer/gelatin hybrid hydrogel presented great features (e.g., porous structure, suitable rheological behavior, and improved cell viability), and resulted in osteogenic differentiation necessary for dental tissue engineering.

The Construction of a Self-assembled Coating with Chitosan-Grafted Reduced Graphene Oxide on Porous Calcium Polyphosphate Scaffolds for Bone Tissue Engineering

Bone regeneration in large bone defects remains one of the major challenges in orthopedic surgery. Calcium polyphosphate (CPP) scaffolds possess excellent biocompatibility and exhibits good bone ingrowth. However, the present CPP scaffolds lack enough osteoinductive activity to facilitate bone regeneration at bone defects that exceed the critical size threshold. To endow CPP scaffolds with improved osteoinductive activity for better bone regeneration, in this study, a self-assembled coating with chitosan-grafted reduced graphene oxide (CS-rGO) sheets was successfully constructed onto the surface of CPP scaffolds through strong electrostatic interaction and hydrogen bonds. Our results showed that the obtained CPP/CS-rGO composite scaffolds exhibited highly improved biomineralization and considerable antibacterial activity. More importantly, CPP/CS-rGO composite scaffolds could drive osteogenic differentiation of BMSCs and significantly up-regulate the expression of osteogenesis-related proteins in vitro. Meanwhile, the CS-rGO coating could inhibit aseptic loosening and improve interfacial osseointegration through stimulating BMSCs to secrete more OPG and lesser RANKL. Overall, the CS-rGO coating adjusts CPP scaffolds' biological environment interface and endows CPP scaffolds with more bioactivity.

Strategies for Enhancing Vascularization of Biomaterial-Based Scaffold in Bone Regeneration

Despite the recent advances in reconstructive orthopedics; fracture union is a challenge to bone regeneration. Concurrent angiogenesis is a complex process governed by events, delicately entwined with osteogenesis. However, poorly perfused scaffolds have lower success rates; necessitating the need for a better vascular component, which is important for the delivery of nutrients, oxygen, waste elimination, recruitment of cells for optimal bone repair. This review highlights the latest strategies to promote biomaterial-based scaffold vascularization by incorporation of cells, growth factors, inorganic ions, etc. into natural or synthetic polymers, ceramic materials, or composites of organic and inorganic compounds. Furthermore, it emphasizes structural modifications, biophysical stimuli, and natural molecules to fabricate scaffolds aiding the genesis of dense vascularization following their implantation to manifest a compatible regenerative microenvironment without graft rejection.

Analysis of Three-Dimensional Cell Migration in Dopamine-Modified Poly(aspartic acid)-Based Hydrogels

Several types of promising cell-based therapies for tissue regeneration have been developing worldwide. However, for successful therapeutical application of cells in this field, appropriate scaffolds are also required. Recently, the research for suitable scaffolds has been focusing on polymer hydrogels due to their similarity to the extracellular matrix. The main limitation regarding amino acid-based hydrogels is their difficult and expensive preparation, which can be avoided by using poly(aspartamide) (PASP)-based hydrogels. PASP-based materials can be chemically modified with various bioactive molecules for the final application purpose. In this study, dopamine containing PASP-based scaffolds is investigated, since dopamine influences several cell biological processes, such as adhesion, migration, proliferation, and differentiation, according to the literature. Periodontal ligament cells (PDLCs) of neuroectodermal origin and SH-SY5Y neuroblastoma cell line were used for the in vitro experiments. The chemical structure of the polymers and hydrogels was proved by ¹H-NMR and FTIR spectroscopy. Scanning electron microscopical (SEM) images confirmed the suitable pore size range of the hydrogels for cell migration. Cell viability assay was carried out according to a standardized protocol using the WST-1 reagent. To visualize three-dimensional cell distribution in the hydrogel matrix, two-photon microscopy was used. According to our results, dopamine containing PASP gels can facilitate vertical cell penetration from the top of the hydrogel in the depth of around 4 cell layers (~150 μm). To quantify these observations, a detailed image analysis process was developed and firstly introduced in this paper.

Polycatecholamine and gentamicin as modifiers for antibacterial and blood-biocompatible polyester vascular prostheses

Polyester (PET) prostheses are commonly used in reconstructive vascular surgery. The most serious complication after implantation is early or late infection of the graft. Therefore, there is high demand to protect prosthesis against bacterial adhesion and biofilm development. For this reason, in this work PET prostheses were first coated by highly adhesive polycatecholamine layer. The grafts were then coupled with gentamicin and studied in relation to morphological and structural properties, biological safety (contact with blood, reaction of vascular endothelial cells (HUVEC), Danio rerio fish), drug release and antibacterial activity. Among two tested catecholamine monomers, L-DOPA was found to be more effective precursor in this process than dopamine. For L-DOPA, assistance of Cu²⁺, Mg²⁺ and Na⁺ ions seems to increase the amount of further immobilized drug. Coated prostheses exhibited greater human endothelial cell proliferation increase and lower cytotoxic effect than uncoated. The modification reduced the hemolysis observed for pristine commercial graft and limited the rate of abnormalities in D. rerio larvae, confirming the safety of the proposed modification. The coating allowed to double the amount of immobilized antibiotic in comparison with uncoated graft which resulted in increased antibacterial activity and reduced bacterial adhesion against 4 bacterial strains prevalent in biomaterials infections. Overall, poly(L-DOPA)-coatings deposited on PET vascular grafts can effectively functionalize these prostheses for higher safety in biomedical applications.

Improved osseointegration of strontium-modified titanium implant by regulating angiogenesis and macrophage polarization

Strotium (Sr) has shown strong osteogenic potential and thereby been widely incorporated into dental and orthopedic implants. However, the improved osseointegration of strontium-modified titanium implant through regulation of angiogenesis and macrophage...

Synergic adhesive chemistry-based fabrication of BMP-2 immobilized silk fibroin hydrogel functionalized with hybrid nanomaterial to augment osteogenic differentiation of rBMSCs for bone defect repair

Bone defect repair and tissue engineering is specifically challenging process because of the distinctive morphological and structural behaviours of natural bone with complex healing and biochemical mechanisms. In the present investigation, we designed dopamine adhesive chemistry-based fabrication of silk fibroin hydrogel (SFD) with incorporation of nano-hydroxyapatite (nHA)-graphene oxide (GO) hybrid nanofillers with well-arranged porous morphology immobilized with bone morphogenic protein-2 (BMP-2) for the effective in vitro rabbit bone marrow derived mesenchymal stem cells loading compatibility and in vivo new bone regrowth and collagen deposition ability. We have achieved bone-specific hydrogel scaffolds with upgraded structural features, mechanical properties and particularly promoted in vitro osteogenic differentiation and compatibility of rabbit bone marrow mesenchymal stem cells (rBMSCs). Structural and microscopic analyses established greater distributions of components and well-ordered and aligned porous structure of the hydrogel network. In vivo result of new bone regrowth was promisingly higher in the Bm@nHG-SFD hydrogel (85%) group as compared to the other treatment groups of nHG-SFD (77%) and nH-SFD (64%) hydrogel. Overall, we summarized that morphologically improved hydrogel material with immobilization of BMP-2 could be have more attentions for new generation bone regeneration therapies.

Recent developments in mussel-inspired materials for biomedical applications

Over the decades, researchers have strived to synthesize and modify nature-inspired biomaterials, with the primary aim to address the challenges of designing functional biomaterials for regenerative medicine and tissue engineering. Among these challenges, biocompatibility and cellular interactions have been extensively investigated. Some of the most desirable characteristics for biomaterials in these applications are the loading of bioactive molecules, strong adhesion to moist areas, improvement of cellular adhesion, and self-healing properties. Mussel-inspired biomaterials have received growing interest mainly due to the changes in mechanical and biological functions of the scaffold due to catechol modification. Here, we summarize the chemical and biological principles and the latest advancements in production, as well as the use of mussel-inspired biomaterials. Our main focus is the polydopamine coating, the conjugation of catechol with other polymers, and the biomedical applications that polydopamine moieties are used for, such as matrices for drug delivery, tissue regeneration, and hemostatic control. We also present a critical conclusion and an inspired view on the prospects for the development and application of mussel-inspired materials.

The Role of Growth Factors in Bioactive Coatings

With increasing obesity and an ageing population, health complications are also on the rise, such as the need to replace a joint with an artificial one. In both humans and animals, the integration of the implant is crucial, and bioactive coatings play an important role in bone tissue engineering. Since bone tissue engineering is about designing an implant that maximally mimics natural bone and is accepted by the tissue, the search for optimal materials and therapeutic agents and their concentrations is increasing. The incorporation of growth factors (GFs) in a bioactive coating represents a novel approach in bone tissue engineering, in which osteoinduction is enhanced in order to create the optimal conditions for the bone healing process, which crucially affects implant fixation. For the application of GFs in coatings and their implementation in clinical practice, factors such as the choice of one or more GFs, their concentration, the coating material, the method of incorporation, and the implant material must be considered to achieve the desired controlled release. Therefore, the avoidance of revision surgery also depends on the success of the design of the most appropriate bioactive coating. This overview considers the integration of the most common GFs that have been investigated in in vitro and in vivo studies, as well as in human clinical trials, with the aim of applying them in bioactive coatings. An overview of the main therapeutic agents that can stimulate cells to express the GFs necessary for bone tissue development is also provided. The main objective is to present the advantages and disadvantages of the GFs that have shown promise for inclusion in bioactive coatings according to the results of numerous studies.

Strontium-doped gelatin scaffolds promote M2 macrophage switch and angiogenesis through modulating the polarization of neutrophils

The immune system mediates inflammation, vascularization and the first response to injuries or implanted biomaterials. Although the function of neutrophils in tissue repair has been extensively studied, its complete role in the tissue regeneration of biomaterials, specifically the resolution of inflammation and promotion of angiogenesis, is unclear. Here, we fabricate nanofibrous gelatin scaffolds containing 10% (w/w) strontium-hydroxyapatite (SrHA) via phase-separation methods to investigate Sr-mediated regulation of neutrophil polarization and, subsequently, the effects on angiogenesis and macrophage polarization. Compared with neutrophils cultured on pure gelatin or HA-incorporated gelatin scaffolds, neutrophils on SrHA-incorporated gelatin scaffolds show more N2 polarization in vitro and in vivo and significantly greater production of immunomodulatory and angiogenic factors. The Sr-induced immunomodulatory and proangiogenic functions of neutrophils are mediated through NF-κB pathway downregulation and increased STAT3 phosphorylation. Thus, neutrophils play a vital role in tissue engineering, and Sr-incorporated scaffolds efficiently promote neutrophil polarization to the N2 phenotype, enhancing resolution of inflammation and ultimately promoting angiogenesis and tissue regeneration. Thus, incorporation of neutrophils in analyses of the immune characteristics of scaffolds and the development of immunomodulatory biomaterials that can regulate neutrophils are novel and promising strategies in tissue engineering.

Dual bio-active factors with adhesion function modified electrospun fibrous scaffold for skin wound and infections therapeutics

Electrospun fibrous scaffolds combined with bioactive factors can display impressive performance as an ideal wound dressing, since they can mimic the composition and physicochemical properties of the extracellular matrix (ECM). The aim of this study was to fabricate a new composite biomaterial (IGF1-DA and Os-DA-modified PLGA electrospun fibrous scaffold) for wound healing, using a rat model for experimental evaluation. A small pentapeptide tag composed of DA-Lys-DA-Lys-DA residues was introduced into insulin-like growth factor 1 (IGF1) and the antimicrobial peptide Os to prepare IGF1 and Os modified with 3,4-dihydroxyphenylalanine (DA) (IGF1-DA and Os-DA). The designed chimeric growth factor and antimicrobial peptide could successfully anchor to PLGA electrospun fibrous scaffolds, and the growth factor and antimicrobial peptide could be controllably released from the electrospun fibrous scaffolds. The results showed that the IGF1-DA and Os-DA-modified PLGA electrospun fibrous scaffolds (PLGA/Os-DA/IGF1-DA) exhibited high hydrophilicity and antimicrobial activity; moreover, the porous network of the scaffolds was similar to that of the natural ECM, which can provide a favourable environment for BALB/C 3T3 cells growth. The in vivo application of PLGA/Os-DA/IGF1-DA electrospun fibrous scaffolds in rat skin wounds resulted in improved wound recovery and tissue regeneration rate. The experimental results indicated that the IGF1-DA and Os-DA could effectively bind to PLGA electrospun fibrous scaffolds, promote wound healing and prevent infection in rats, thereby suggesting that PLGA/Os-DA/IGF1-DA electrospun fibrous scaffolds have a wide application value in the field of skin wound repair.

A simple hydrogel scaffold with injectability, adhesivity and osteogenic activity for bone regeneration

A simple hydrogel scaffold with injectability, adhesivity and osteogenic activity is facilely prepared by directly mixing strontium chloride and Alg-DA aqueous solutions.

Polyphenol scaffolds in tissue engineering

Polyphenols are a class of ubiquitous compounds distributed in nature, with fascinating inherent biocompatible, bioadhesive, antioxidant, and antibacterial properties. The unique polyphenolic structures based on catechol or pyrogallol moieties allow for strong non-covalent interactions (e.g., multiple hydrogen bonding, electrostatic, and cation-π interactions) as well as covalent interactions (e.g., Michael addition/Schiff-base reaction, radical coupling reaction, and dynamic coordination interactions with boronate or metal ions). This review article provides an overview of the polyphenol-based scaffolds including the hydrogels, films, and nanofibers that have emerged from chemical and functional signatures during the past years. A full description of the structure-function relationships in terms of their utilization in wound healing, bone regeneration, and electroactive tissue engineering is also carefully discussed, which may pave the path towards the rational design and facile preparation of next-generation polyphenol scaffolds for tissue engineering applications.

Preparation of poly-dopamine-silk fibroin sponge and its dye molecular adsorption

This paper proposes a process for fabricating a poly-dopamine-silk fibroin sponge (PDA-SF) by using dopamine self-assembly and coating the skeleton of a silk fibroin sponge. The PDA-SF sponge was characterized by SEM, TEM, XPS, XRD and FT-IR. It was found that the sponge exhibits sheet structures with a pore size of 60 ± 20 μm and poly-dopamine adhered to the surface of pure silk fibroin through noncovalent bond forces. With a hierarchical porous structure, the derived sponge provides fast flow channels and abundant active sites, which will benefit the diffusion and removal of cationic dyes. Batch adsorption and dynamic adsorption of crystal violet (CV) were studied. The batch adsorption capacity of the PDA-SF sponge for CV increased with its PDA content. Under a dynamic adsorption mode, the adsorption efficiency of the PDA-SF sponge for CV (5 mg/L, 200 mL) can reach up to 98.2% after 12 min, whereas it is only 90.2% under stationary mode after 72 h. Furthermore, the sponge shows an outstanding smart adsorption performance. More importantly, the composite sponge still keeps high separation and adsorption efficiencies after 20 cycles, and the appearance remains good.

Therapeutic Metallic Ions in Bone Tissue Engineering: A Systematic Review of The Literature

An important field of bone tissue engineering (BTE) concerns the design and fabrication of smart scaffolds capable of inducing cellular interactions and differentiation of osteo-progenitor cells. One of these additives that has gained growing attention is metallic ions as therapeutic agents (MITAs). The specific biological advantage that these ions bring to scaffolds as well as other potential mechanical, and antimicrobial enhancements may vary depending on the ion entity, fabrication method, and biomaterials used. Therefore, this article provides an overview on current status of In-vivo application of MITAs in BTE and the remaining challenges in the field. Electronic databases, including PubMed, Scopus, Science direct and Cochrane library were searched for studies on MITAs treatments for BTE. We searched for articles in English from January-2000 to October-2019. Abstracts, letters, conference papers and reviews, In-vitro studies, studies on alloys and studies investigating effects other than enhancement of new bone formation (NBF) were excluded. A detailed summary of relevant metallic ions with specific scaffold material and design, cell type, animal model and defect type, the implantation period, measured parameters and obtained qualitative and quantitative results is presented. No ideal material or fabrication method suited to deliver MITAs can yet be agreed upon, but an investigation into various systems and their drawbacks or potential advantages can lead the future research. A tendency to enhance NBF with MITAs can be observed in the studies. However, this needs to be validated with further studies comparing various ions with each other in the same animal model using critical-sized defects.

Natural Polymeric Scaffolds in Bone Regeneration

Despite considerable advances in microsurgical techniques over the past decades, bone tissue remains a challenging arena to obtain a satisfying functional and structural restoration after damage. Through the production of substituting materials mimicking the physical and biological properties of the healthy tissue, tissue engineering strategies address an urgent clinical need for therapeutic alternatives to bone autografts. By virtue of their structural versatility, polymers have a predominant role in generating the biodegradable matrices that hold the cells in situ to sustain the growth of new tissue until integration into the transplantation area (i.e., scaffolds). As compared to synthetic ones, polymers of natural origin generally present superior biocompatibility and bioactivity. Their assembly and further engineering give rise to a wide plethora of advanced supporting materials, accounting for systems based on hydrogels or scaffolds with either fibrous or porous architecture. The present review offers an overview of the various types of natural polymers currently adopted in bone tissue engineering, describing their manufacturing techniques and procedures of functionalization with active biomolecules, and listing the advantages and disadvantages in their respective use in order to critically compare their actual applicability potential. Their combination to other classes of materials (such as micro and nanomaterials) and other innovative strategies to reproduce physiological bone microenvironments in a more faithful way are also illustrated. The regeneration outcomes achieved in vitro and in vivo when the scaffolds are enriched with different cell types, as well as the preliminary clinical applications are presented, before the prospects in this research field are finally discussed. The collection of studies herein considered confirms that advances in natural polymer research will be determinant in designing translatable materials for efficient tissue regeneration with forthcoming impact expected in the treatment of bone defects.

A novel CPC composite cement reinforced by dopamine coated SCPP fibers with improved physicochemical and biological properties

Traditional CPC cements have attracted wide attentions in repairing bone defects for injectability, easy plasticity and good osseointegration. However, its further application was limited by poor mechanical properties, long setting time and unsatisfactory biocompatibility. To solve these problems, polydopamine (DOPA) coated strontium-doped calcium polyphosphate (SCPP) fibers were added into CPC cements for the first time. A doping amount at fiber weight fraction of 0%, 1%, 2% and 5% was designed to develop a multifunctional composite fitting for bone tissues' regeneration and reconstruction and the optimum amount was selected through subsequent physicochemical and biological characterizations. The results implied DOPA coating successfully formed stable connections between SCPP fibers and CPC matrix, which simultaneously reinforced biomechanical strength and tenacity (5% SCPP/D/CPC samples exhibited more prominent mechanical property than others). In addition, 5% D/SCPP fibers doped composite cements were characterized as markedly-improved cytocompatibility: Sr²⁺ introduction induced cytoactive and significantly accelerated proliferation, attachment and spreading of osteoblasts. Besides, it also stimulated the secretion of OT, Col-I and ALP from seeded MG63, which was a critical character for further inducing osteogenic process, mineralization and bone tissues formation. The promoted cytocompatibility and improved osteogenesis-related growth factors' secretion could be attributed to constant and controllable release of Sr²⁺ and this deduction was approved by ICP analysis. In addition, Sr doping made this novel cement had a potential efficacy to inhibit aseptic loosening. In a word, present studies all demonstrated 5% SCPP/D/CPC composites could be a potential candidate material employed in bone regeneration and reconstruction for excellent mechanical property and cytocompatibility.

The Impact of Bioceramic Scaffolds on Bone Regeneration in Preclinical In Vivo Studies: A Systematic Review

Bioceramic scaffolds are appealing for alveolar bone regeneration, because they are emerging as promising alternatives to autogenous and heterogenous bone grafts. The aim of this systematic review is to answer to the focal question: in critical-sized bone defects in experimental animal models, does the use of a bioceramic scaffolds improve new bone formation, compared with leaving the empty defect without grafting materials or using autogenous bone or deproteinized bovine-derived bone substitutes? Electronic databases were searched using specific search terms. A hand search was also undertaken. Only randomized and controlled studies in the English language, published in peer-reviewed journals between 2013 and 2018, using critical-sized bone defect models in non-medically compromised animals, were considered. Risk of bias assessment was performed using the SYRCLE tool. A meta-analysis was planned to synthesize the evidence, if possible. Thirteen studies reporting on small animal models (six studies on rats and seven on rabbits) were included. The calvarial bone defect was the most common experimental site. The empty defect was used as the only control in all studies except one. In all studies the bioceramic materials demonstrated a trend for better outcomes compared to an empty control. Due to heterogeneity in protocols and outcomes among the included studies, no meta-analysis could be performed. Bioceramics can be considered promising grafting materials, though further evidence is needed.

Inorganic Biomaterials for Regenerative Medicine

Regenerative medicine leverages the innate potential of the human body to efficiently repair and regenerate damaged tissues using engineered biomaterials. By designing responsive biomaterials with the appropriate biophysical and biochemical characteristics, cellular response can be modulated to direct tissue healing. Recently, inorganic biomaterials have been shown to regulate cellular responses including cell-cell and cell-matrix interactions. Moreover, ions released from these mineral-based biomaterials play a vital role in defining cell identity, as well as driving tissue-specific functions. The intrinsic properties of inorganic biomaterials, such as the release of bioactive ions (e.g., Ca, Mg, Sr, Si, B, Fe, Cu, Zn, Cr, Co, Mo, Mn, Au, Ag, V, Eu, and La), can be leveraged to induce phenotypic changes in cells or modulate the immune microenvironment to direct tissue healing and regeneration. Biophysical characteristics of biomaterials, such as topography, charge, size, electrostatic interactions, and stiffness can be modulated by addition of inorganic micro- and nanoparticles to polymeric networks have also been shown to play an important role in their biological response. In this Review, we discuss the recent emergence of inorganic biomaterials to harness the innate regenerative potential of the body. Specifically, we will discuss various biophysical or biochemical effects of inorganic-based materials in directing cellular response for regenerative medicine applications.

The effects of silk layer-by-layer surface modification on the mechanical and structural retention of extracellular matrix scaffolds

The SF layer-by-layer surface functionalized SIS membrane exhibits tunable mechanical properties and degradation rate, satisfactory biocompatibility and good bioactivity.

Evaluation of the degradation, biocompatibility and osteogenesis behavior of lithium-doped calcium polyphosphate for bone tissue engineering

BACKGROUND

Calcium polyphosphate (CPP) is a commonly used biomaterial in bone tissue engineering, but CPP is insufficient in osteoinduction. This study aimed to fabricate lithium doped CPP (LiCPP) scaffolds and assess their characterization, degradation, biocompatibility and osteogenesis behavior for bone tissue engineering.

METHODS

The novel scaffold was characterized by XRD, FTIR and SEM. The porosity, cell mediated degradation behavior and mechanical properties were also investigated. Meanwhile, cell proliferation activity and adhesion in vitro was exploited. Finally, osteogenesis the LiCPP scaffolds in vitro and in vivo was researched.

RESULTS

The outcomes revealed that low-content Li doping had no significant influence on the structure of CPP. The results of cells mediated degradation experiments from the weight loss and the release of ions indicated that Li doped CPP improved biological degradation. The compressive strength of CPP with 66% porosity was improved to 7 MPa. Cells proliferation experiment and adhesion experiment demonstrated 2.0%LiCPP scaffold was most beneficial to cell growth and attachment. Furthermore, Li doped CPP up-regulated Wnt signal pathway when co-cultured with MG63 and increased osteogenic marker ALP expression and calcium phosphate deposition in vitro. At the same time, new bone formation in vivo was also enhanced by using LiCPP scaffolds and the 2.0%LiCPP scaffolds obtained best osteogenesis outcomes.

CONCLUSION

The results obtained in our study suggest that 2.0%LiCPP scaffold could benefit from improving the osteogenesis behavior and is a promising biomaterial for bone repairing applications.

Tailoring Synthetic Melanin Nanoparticles for Enhanced Photothermal Therapy

Melanin and its synthetic analogs (i.e., polydopamine nanomaterials) are able to transform a near-infrared (NIR) light energy source to heat for the selective killing of cancer cells. Although many of the effects on these nontoxic photothermal agents have been well documented, a concern has arisen that the extended usage of these natural and synthetic melanins might be hindered by their limited photothermal effects under low-density light irradiation. To address this issue, herein, we propose a rational and green fabrication strategy toward a new class of synthetic melanin nanoparticles (SMNPs) with superior photothermal effects via the one-pot copolymerization of two kinds of naturally occurring monomers (arginine and dopamine). The total photothermal efficiencies of these arginine-doped SMNPs could be significantly improved (i.e., ∼60% increase) by enhancing 808 nm NIR light absorption via the construction of donor-acceptor microstructures within SMNPs and decreasing nonthermal radiative transition processes via the increase of free radical concentrations within SMNPs. The resulting SMNPs demonstrated higher photothermal therapy efficiencies in both killing 4T1 cancer cells in vitro and suppressing tumor growth and recurrence compared with conventional agents. This work offers new opportunities in the structural and functional tailoring of melanin-inspired nanomaterials for cancer treatment via green fabrication strategies.

A promising material for bone repair: PMMA bone cement modified by dopamine-coated strontium-doped calcium polyphosphate particles

Polymethyl methacrylate (PMMA) bone cement has been widely used in clinics as bone repair materials for its excellent mechanical properties and good injection properties. However, it also has defects such as poor biological performance, high temperature, and the monomer has certain toxicity. Our study tried to modify the PMMA bone cement by doping with various particle weight fractions (5, 10 and 15%) of SCPP particles and polydopamine-coated SCPP particles (D/SCPP) to overcome its clinical application disadvantages. Our study showed that all results of physical properties of samples are in accordance with ISO 5833. The 15% D/SCPP/PMMA composite bone cement had much better biocompatibility compared with pure PMMA bone cement and SCPP/PMMA composite bone cement due to the best cell growth-promoting mineralization deposition on the surface of 15% D/SCPP/PMMA composite bone cements and Sr²⁺ released from SCPP particles. Our research also revealed that the reaction temperature was found to be reduced with an increase in doped particles after incorporating the particles into composite bone cements. The novel PMMA bone cements modified by D/SCPP particles are promising materials for bone repair.

Supercritical CO2 foamed composite scaffolds incorporating bioactive lipids promote vascularized bone regeneration via Hif-1α upregulation and enhanced type H vessel formation

Bone tissue engineering has substantial potential for the treatment of massive bone defects; however, efficient vascularization coupled with bone regeneration still remains a challenge in this field. In the current study, supercritical carbon dioxide (scCO₂) foaming technique was adopted to fabricate mesoporous bioactive glasses (MBGs) particle-poly (lactic-co-glycolic acid) (PLGA) composite scaffolds with appropriate mechanical and degradation properties as well as in vitro bioactivity. The MBG-PLGA scaffolds incorporating the bioactive lipid FTY720 (designated as FTY/MBG-PLGA) exhibited simultaneously sustained release of the bioactive lipid and ions. In addition to providing a favorable microenvironment for cellular adhesion and proliferation, FTY/MBG-PLGA scaffolds significantly facilitated the in vitro osteogenic differentiation of rBMSCs and also markedly stimulated the upregulation of Hif-1α expression via the activation of the Erk1/2 pathway, which mediated the osteogenic and pro-angiogenic effects on rBMSCs. Furthermore, FTY/MBG-PLGA extracts induced superior in vitro angiogenic performance of HUVECs. In vivo evaluation of critical-sized rat calvarial bone defects indicated that FTY/MBG-PLGA scaffolds potently promoted vascularized bone regeneration. Notably, the significantly enhanced formation of type H vessels (CD31^hiEmcn^hi neo-vessels) was observed in newly formed bone tissue in FTY/MBG-PLGA group, strongly suggesting that FTY720 and therapeutic ions released from the scaffolds synergistically induced more type H vessel formation, which indicated the coupling of angiogenesis and osteogenesis to achieve efficiently vascularized bone regeneration. Overall, the results indicated that the foamed porous MBG-PLGA scaffolds incorporating bioactive lipids achieved desirable vascularization-coupled bone formation and could be a promising strategy for bone regenerative medicine. STATEMENT OF SIGNIFICANCE: Efficacious coupling of vascularizationandbone formation is critical for the restoration of large bone defects. Anoveltechnique was used to fabricate composite scaffolds incorporating bioactive lipids which possessedsynergistic cues of bioactive lipids and therapeutic ions to potently promotebone regenerationas well as vascularization. The underlying molecular mechanism for the osteogenic and pro-angiogenic effects of the compositescaffolds was unveiled. Interestingly, the scaffolds were furtherfoundto enhance the formation oftype H capillarieswithin the bone healing microenvironment to couple angiogenesis to osteogenesis to achieve satisfyingvascularizedbone regeneration.These findings provide a novel strategy to develop efficiently vascularized engineering constructs to treat massive bone defects.

Enhanced bone defect repairing effects in glucocorticoid-induced osteonecrosis of the femoral head using a porous nano-lithium-hydroxyapatite/gelatin microsphere/erythropoietin composite scaffold

Glucocorticoid-induced osteonecrosis of the femoral head (GIONFH) is a common debilitating disease that occurs in young and middle-aged adults. To treat early GIONFH, core decompression and bone graft are regarded as effective measures. However, the ideal bone graft should possess bioactivity as well as biomechanical properties. The most commonly used bone graft materials are currently unsatisfactory. In this study, we fabricated a composited scaffold using lithium (Li) to activate the Wnt signal pathway and erythrogenin (EPO) to upregulate the HIF-1/VEGF pathway to improve the osteogenic and angiogenic effects of the scaffold. We obtained the porous gelatin/nano-lithium-hydroxyapatite/gelatin microsphere/rhEPO (Li-nHA/GMs/rhEPO) composited scaffold and assessed its mechanical properties, release properties, and in vitro bioactivity. Then, we implanted the scaffold into the femoral heads of GIONFH rabbits after core decompression surgery and evaluated the osteogenic and angiogenic abilities of the scaffold in vivo as well as its bone defect repair efficacy. As the results show, the Li-nHA/GM/rhEPO scaffold possessed good mechanical compression strength and enabled continuous release of Li and rhEPO. Moreover, the scaffold improved the viability of glucocorticoid-treated BMMSCs and vascular endothelial cells and increased the expression of osteogenic and angiogenic factors. In the in vivo study, the composited scaffold improved new bone formation and exerted effects on repairing femoral head defects in GIONFH rabbits. Additionally, the osteogenic and angiogenic factors were increased along with the activation of factors in the Wnt signal pathway and the HIF-1/VEGF pathway. In conclusion, the Li-nHA/GM/rhEPO scaffold can upregulate the Wnt and HIF-1/VEGF pathways at same time and has effects on improving osteogenesis and angiogenesis, which benefits the repair of GIONFH.

Synergetic topography and chemistry cues guiding osteogenic differentiation in bone marrow stromal cells through ERK1/2 and p38 MAPK signaling pathway

Both the topographic surface and chemical composition modification can enhance rapid osteogenic differentiation and bone formation. Till now, the synergetic effects of topography and chemistry cues guiding biological responses have been rarely reported. Herein, the ordered micro-patterned topography and classically essential trace element of strontium (Sr) ion doping were selected to imitate topography and chemistry cues, respectively. The ordered micro-patterned topography on Sr ion-doped bioceramics was successfully duplicated using the nylon sieve as the template. Biological response results revealed that the micro-patterned topography design or Sr doping could promote cell attachment, ALP activity, and osteogenic differentiation of bone marrow-derived mesenchymal stem cells (BMSCs). Most importantly, the samples both with micro-patterned topography and Sr doping showed the highest promotion effects, and could synergistically activate the ERK1/2 and p38 MAPK signaling pathways. The results suggested that the grafts with both specific topography and chemistry cues have synergetic effects on osteogenic activity of BMSCs and provide an effective approach to design functional bone grafts and cell culture substrates.

Introducing copper and collagen (via poly(DOPA)) coating to activate inert ceramic scaffolds for excellent angiogenic and osteogenic capacity

Traditional calcium polyphosphate (CPP) scaffolds have attracted wide attention for repairing bone defects owing to their low cytotoxicity and controllable degradation. However, because of poor mechanical strength, significant brittleness and suboptimal osteoinductivity and osteoconductivity, their further clinical applications are restricted. To overcome these limitations, collagen (Col) coated Cu(ii) ion-doped calcium polyphosphate (CCPP) scaffolds were employed and dopamine (DOPA) was used as a linkage (CCPP/D/Col) to ensure their stable and tight structure. Controllable Cu(ii) ion continuously released from scaffolds together with collagen coating could simultaneously enhance the cytocompatibility, compressive strength and ductility, bone-related gene expression and new bone regeneration. In comparison with the initial CPP specimens, these multifunctional CCPP/D/Col composite scaffolds' crystal grains of CCPP were arranged regularly and well-ordered, and the size and rugosity were more suitable for cell spreading and attachment. Murine bone marrow stem cells (BMSCs) seeded on CCPP/D/Col scaffolds possessed better proliferation and migration, rapid attachment and enhanced expression of osteogenic-related genes, which indicated better bone regeneration. The potential mechanism of this process was further elucidated. Both copper doping and collagen coating could effectively stabilize hypoxia-inducible factor-1α (HIF-1α) that thus stimulates the expression of vascular endothelial growth factor (VEGF). In addition, they could also promote the osteogenic differentiation of cells through stimulating bone-related gene expression. The concept of introducing active ions and biological macromolecules to modify inert ceramics may offer a new strategy to construct a multifunctional composite scaffold for bone tissue regeneration.

Transplantation of copper-doped calcium polyphosphate scaffolds combined with copper (II) preconditioned bone marrow mesenchymal stem cells for bone defect repair

Calcium polyphosphate is a bioactive ceramic that possesses similar mineral components to bone and possess good physicochemical properties. However, pure calcium polyphosphate scaffold is brittle, and it is insufficient in promoting vascularization and osteoinductivity. This study was conducted to assess whether copper (Cu) incorporated into calcium polyphosphate could improve the scaffolds' inherent shortcomings. In the experiments, Cu-calcium polyphosphate scaffolds' mechanical strength, biocompatibility, and biodegradability were researched primarily. And then, hypoxia-inducible factor 1-alpha expression along with angiogenesis and osteogenesis potential when the scaffolds treated with the bone marrow mesenchymal stem cells (BMMSCs) were analyzed in vitro. In in vivo studies, the Cu-calcium polyphosphate scaffolds combined with the liquid extract preconditioned BMMSCs were implanted into animal model to repair the bone defects. Meanwhile, we also evaluate the expression of angiogenic and osteogenic factors. For comparison, Cu-calcium polyphosphate, calcium polyphosphate, and blank control groups were designed. According to the results, proper content of Cu incorporated with calcium polyphosphate (0.1% Cu-calcium polyphosphate) did not significantly change the scaffold's degradation velocity, but it obtained higher compress mechanical strength and Cu-doped scaffolds were less brittle. Besides, these scaffolds incorporated with Cu showed better cytocompatibility and cell proliferation activity. Moreover, after Cu was doped, the hypoxia-inducible factor 1-alpha expression was up-regulated with the angiogenic and osteogenic factors levels increased both in in vitro and in vivo study. The bone defect healing capacity was accessed, using Cu-calcium polyphosphate combined with preconditioned BMMSCs further enhanced new bone formation and improved hypoxia-inducible factor 1-alpha, alkaline phosphatase, osteocalcin, and vascular endothelial growth factor expression. In conclusion, doped Cu into calcium polyphosphate was an alternative strategy for improving calcium polyphosphate's mechanical property and promoting the osteogenesis and angiogenesis potential. Using Cu-calcium polyphosphate scaffolds combined with Cu preconditioned BMMSCs to treat bone defect could enhance bone defect healing.

The effects of Sr-incorporated micro/nano rough titanium surface on rBMSC migration and osteogenic differentiation for rapid osteointegration

MNT-Sr can promote rBMSC osteogenic differentiation and significantly enhance rBMSC migration and homing via activation of SDF-1α/CXCR4 signaling.

Enhanced osteogenic activity of Ti alloy implants by modulating strontium configuration in their surface oxide layers

Strontium configurations can modulate its release in the SrO–TiO₂coating system, thus being able to control the interfacial osteogenesis.

Preparation and investigation of novel SrCl2/DCMC-modified (via DOPA) decellularized arteries with excellent physicochemical properties and cytocompatibility for vascular scaffolds

A new method of fabricating vascular scaffolds was designed in this article by crosslinking the porcine arteries using dialdehyde carboxymethyl (DCMC) and further introducing the Sr element on the surface of modified arteries using DOPA. DCMC had been selected as an ideal crosslinking reagent for its excellent cytobiocompatibility and suitable chemical reactivity. Unfortunately, the endothelialization of biological vascular scaffolds fixed by DCMC was unsatisfactory. To overcome this deficiency, the Sr element was introduced onto arteries to improve the endothelialization of fixed arteries due to the Sr element being able to promote the expression of vascular endothelial growth factor (VEGF) being crucial for growth and proliferation of HUVECs. After modifying and crosslinking, their chemical structures, mechanical properties, stability, and cytocompatibility were examined. Our findings demonstrated that DCMC could improve the mechanical properties of animal-derived materials successfully and possess suitable biocompatibility compared with glutaraldehyde (GA). The Sr element can easily be introduced onto the surface of DCMC modified arteries by DOPA. Compared with purely DCMC-crosslinked ones, SrCl₂/DCMC modification has no significant effect on the mechanical strength of fixed arteries, but a slight tendancy to improve the stability of fixed samples in D-Hanks solution. MTT assay and fluorescence tests implied that SrCl₂/DCMC modification could effectively stimulate HUVECs' adhesion and proliferation, and thus promote the endothelialization process of fixed arteries. SrCl₂/DCMC-modified arteries with excellent physicochemical properties and appealing HUVEC-cytocompatibility should be promising materials for fabricating vascular scaffolds.

A new method of fabricating vascular scaffolds was designed in this article by crosslinking the porcine arteries using dialdehyde carboxymethyl (DCMC) and further introducing the Sr element on the surface of modified arteries using DOPA.

Effects of a bone graft substitute consisting of porous gradient HA/ZrO2 and gelatin/chitosan slow-release hydrogel containing BMP-2 and BMSCs on lumbar vertebral defect repair in rhesus monkey

Dense biomaterial plays an important role in bone replacement. However, it fails to induce bone cell migration into graft material. In the present study, a novel bone graft substitute (BGS) consisting of porous gradient hydroxyapatite/zirconia composite (PGHC) and gelatin/chitosan slow-release hydrogel containing bone morphogenetic protein 2 and bone mesenchymal stem cells was designed and prepared to repair lumbar vertebral defects. The morphological characteristics of the BGS evaluated by a scanning electron microscope showed that it had a three-dimensional network structure with uniformly distributed chitosan microspheres on the surfaces of the graft material and the interior of the pores. Then, BGS (Group A), PGHC (Group B), or autologous bone (Group C) was implanted into lumbar vertebral body defects in a total of 24 healthy rhesus monkeys. After 8 and 16 weeks, anteroposterior and lateral radiographs of the lumbar spine, microcomputed tomography, histomorphometry, biomechanical testing, and biochemical testing for bone matrix markers, including Type I collagen, osteocalcin, osteopontin, basic fibroblast growth factor, alkaline phosphatase, and vascular endothelial growth factor, were performed to examine the reparative efficacy of the BGS and PGHC. The BGS displayed excellent ability to repair the lumbar vertebral defect in rhesus monkeys. Radiography, microcomputed tomography scanning, and histomorphological characterization showed that the newly formed bone volume in the interior of the pores in the BGS was significantly higher than in the PGHC. The results of biomechanical testing indicated that the vertebral body compression strength of the PGHC implant was lower than the other implants. Reverse-transcription polymerase chain reaction and western blot analyses showed that the expression of bone-related proteins in the BGS implant was significantly higher than in the PGHC implant. The BGS displayed reparative effects similar to autologous bone. Therefore, BGS use in vertebral bone defect repair appears promising.

Repair of the calvarial defect in goat model using magnesium-doped porous hydroxyapatite combined with recombinant human bone morphogenetic protein-2

Hydroxyapatite (HA) is a representative bone repairing biomaterial for its similar composition to human bones and teeth. However, pure HA is limited in application for some unwanted characteristic, such as it is brickle and weakness in degradation. In this study, we modified HA by doping magnesium (Mg) to the material and studied its property in vitro. Besides, we also evaluated the calvarial defect repair effect using MgHA combined with rhBMP-2 in goat model. According to our outcomes, HA composited Mg made the scaffold smooth and the pore regular. In vitro study, Mg could increase the Ca releasing, which may reflect a faster degradation property modified by Mg. And then, MgHA improved the cell viability and proliferation. Furthermore, MgHA could increase the expression of ALP, Collagen I and VEGF protein compared with pure HA (p<0.5, respectively). In the vivo study, MgHA showed a better bone defect healing effect in computed tomography (CT) evaluation compared with HA (p<0.05), but it was inferior to the MgHA/rhBMP-2 (p<0.05). Besides, in the histological analysis, MgHA/rhBMP-2 showed the most effective bone formation outcome (p<0.05), and the MgHA group was significant better than the pure HA group on osteogenesis (p<0.05). Furthermore, Collagen I and VEGF mRNA expression at 12 week in MgHA/rhBMP-2 group were also significat higher than other two groups. In conclusion, Mg had effects on bone formation and angiogenesis, and MgHA/rhBMP-2 had improved the bone defect repair effect. It is worthy of being recommended to bone tissue engineering.

Ag-loaded MgSrFe-layered double hydroxide/chitosan composite scaffold with enhanced osteogenic and antibacterial property for bone engineering tissue

Bone tissue engineering scaffolds for the reconstruction of large bone defects should simultaneously promote osteogenic differentiation and avoid postoperative infection. Herein, we develop, for the first time, Ag-loaded MgSrFe-layered double hydroxide/chitosan (Ag-MgSrFe/CS) composite scaffold. This scaffold exhibits three-dimensional interconnected macroporous structure with a pore size of 100-300 μm. The layered double hydroxide nanoplates in the Ag-MgSrFe/CS show lateral sizes of 200-400 nm and thicknesses of ∼50 nm, and the Ag nanoparticles with particle sizes of ∼20 nm are uniformly dispersed on the scaffold surfaces. Human bone marrow-derived mesenchymal stem cells (hBMSCs) present good adhesion, spreading, and proliferation on the Ag-MgSrFe/CS composite scaffold, suggesting that the Ag and Sr elements in the composite scaffold have no toxicity to hBMSCs. When compared with MgFe/CS composite scaffold, the Ag-MgSrFe/CS composite scaffold has better osteogenic property. The released Sr²⁺ ions from the composite scaffold enhance the alkaline phosphatase activity of hBMSCs, promote the extracellular matrix mineralization, and increase the expression levels of osteogenic-related RUNX2 and BMP-2. Moreover, the Ag-MgSrFe/CS composite scaffold possesses good antibacterial property because the Ag nanoparticles in the composite scaffold effectively prevent biofilm formation against S. aureus. Hence, the Ag-MgSrFe/CS composite scaffold with excellent osteoinductivity and antibacterial property has a great potential for bone tissue engineering. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 863-873, 2018.

Biocompatibility and safety evaluation of a silk fibroin-doped calcium polyphosphate scaffold copolymer in vitro and in vivo

For the reconstruction of cartilage and bone defects, bone repair scaffolds with porous network structures have been extensively studied.

Fabrication of a novel bio-inspired collagen–polydopamine hydrogel and insights into the formation mechanism for biomedical applications

A novel bio-inspired hydrogel with good biological property and initiative adhesive ability to cells has been fabricated via collagen self-assembly and the incorporation of PDA, which provides a significant potential in biomedical applications.

Reinforcement of a new calcium phosphate cement with dopamine-mediated strontium-doped calcium polyphosphate-modified polycaprolactone fibers

To improve the performance of calcium phosphate cement, dopamine/PCL fibers and strontium-doped calcium polyphosphate/D/PCL fibers were respectively incorporated into Sr-containing calcium phosphate cement to develop a novel bone cement.