Bioelectronics for electrical stimulation: materials, devices and biomedical applications

Bioelectronics is a hot research topic, yet an important tool, as it facilitates the creation of advanced medical devices that interact with biological systems to effectively diagnose, monitor and treat a broad spectrum of health conditions. Electrical stimulation (ES) is a pivotal technique in bioelectronics, offering a precise, non-pharmacological means to modulate and control biological processes across molecular, cellular, tissue, and organ levels. This method holds the potential to restore or enhance physiological functions compromised by diseases or injuries by integrating sophisticated electrical signals, device interfaces, and designs tailored to specific biological mechanisms. This review explains the mechanisms by which ES influences cellular behaviors, introduces the essential stimulation principles, discusses the performance requirements for optimal ES systems, and highlights the representative applications. From this review, we can realize the potential of ES based bioelectronics in therapy, regenerative medicine and rehabilitation engineering technologies, ranging from tissue engineering to neurological technologies, and the modulation of cardiovascular and cognitive functions. This review underscores the versatility of ES in various biomedical contexts and emphasizes the need to adapt to complex biological and clinical landscapes it addresses.

Ultrasensitive HPLC-MS Quantification of S-(2-Succino) Cysteine Based on Ethanol/Acetyl Chloride Derivatization in Fumarate Accumulation Cells

Succination is a nonenzymatic and irreversible post-translational modification (PTM) with important biological significance, yielding S-(2-succino) cysteine (2SC) residue. This PTM is low in abundance and often requires a large amount of protein samples for 2SC quantification. In this work, an efficient quantification method based on ethanol/acetyl chloride chemical derivatization was developed. The three carboxyl groups of 2SC were all esterified to increase hydrophobicity, greatly improving its ionization efficiency. The sensitivity was increased by 112 times; the limit of detection was reduced to 0.885 fmol, and the protein usage was reduced by at least 10 times. The established method was used to detect the overall concentration of 2SC in fumarate accumulation cells quantitatively.

Chiral Naphthalenediimides with High-Efficiency Fluorescence and Circularly Polarized Luminescence in the Solid State for the Application in Organic Optoelectronics

Naphthalenediimides (NDIs) have been extensively studied due to their tunable luminescent properties. However, generally, the monomers or aggregates of non-core substituted NDIs exhibit low fluorescence quantum yields (Φ_FL <10 %) in the solid state, which limit their applications as light-emitting materials and render their chiral species unsuitable for circularly polarized luminescence (CPL). Herein, a series of non-core substituted chiral NDIs that exhibit high luminous efficiencies (Φ_FL up to 56.8 % for racemate and 36.5 % for enantiomer) and a strong CPL behavior in the solid state is reported. These significant improvements are attributed to the unique molecular conformation of the chiral NDIs and the formation of distinctive discrete dimers. The structures of the NDIs were significantly simpler and more accessible than those of other NDIs. The findings evidence that non-core substituted NDIs can exhibit strong fluorescence in the solid state and provide a new pathway to improve photophysical properties of NDIs.

Differential copper-guided architectures of amyloid β peptidomimetics modulate oxidation states and catalysis

Orchestration of differential architectures of designer peptidomimetics that modulate metal oxidation states to perform multiple chemical transformations remains a challenge. Cu-chelation and self-assembly properties of amyloid β (Aβ14-23) peptide were tuned by the incorporation of cyclic dipeptide (CDP) and pyrene (Py) as the assembly directing and reporting units, respectively. We explore the molecular architectonics of Aβ14-23 derived peptidomimetics (AkdNMCPy) to form differential architectures that stabilize distinct Cu oxidation states. The fibrillar self-assembly of AkdNMCPy is modulated to form nanosheets by the one-off addition of CuII. Notably, the serial addition of CuII resulted in the formation of micelle-like core-shell architectures. The micelle-like and nanosheet architectures were found to differentially stabilize CuII and CuI states and catalyze tandem oxidative-hydrolysis and alkyne-azide cycloaddition reactions, respectively.

Biomimetic and Biological Nanoarchitectonics

A post-nanotechnology concept has been assigned to an emerging concept, nanoarchitectonics. Nanoarchitectonics aims to establish a discipline in which functional materials are fabricated from nano-scale components such as atoms, molecules, and nanomaterials using various techniques. Nanoarchitectonics opens ways to form a more unified paradigm by integrating nanotechnology with organic chemistry, supramolecular chemistry, material chemistry, microfabrication technology, and biotechnology. On the other hand, biological systems consist of rational organization of constituent molecules. Their structures have highly asymmetric and hierarchical features that allow for chained functional coordination, signal amplification, and vector-like energy and signal flow. The process of nanoarchitectonics is based on the premise of combining several different processes, which makes it easier to obtain a hierarchical structure. Therefore, nanoarchitectonics is a more suitable methodology for creating highly functional systems based on structural asymmetry and hierarchy like biosystems. The creation of functional materials by nanoarchitectonics is somewhat similar to the creation of functional systems in biological systems. It can be said that the goal of nanoarchitectonics is to create highly functional systems similar to those found in biological systems. This review article summarizes the synthesis of biomimetic and biological molecules and their functional structure formation from various viewpoints, from the molecular level to the cellular level. Several recent examples are arranged and categorized to illustrate such a trend with sections of (i) synthetic nanoarchitectonics for bio-related units, (ii) self-assembly nanoarchitectonics with bio-related units, (iii) nanoarchitectonics with nucleic acids, (iv) nanoarchitectonics with peptides, (v) nanoarchitectonics with proteins, and (vi) bio-related nanoarchitectonics in conjugation with materials.

Molecular Architectonics-guided Design of Biomaterials

The quest for mastering the controlled engineering of dynamic molecular assemblies is the basis of molecular architectonics. The rational use of noncovalent interactions to programme the molecular assemblies allow the construction of diverse molecular and material architectures with novel functional properties and applications. Understanding and controlling the assembly of molecular systems are daunting tasks owing to the complex factors that govern at the molecular level. Molecular architectures depend on the design of functional molecular modules through the judicious selection of functional core and auxiliary units to guide the precise molecular assembly and co-assembly patterns. Biomolecules with built-in information for molecular recognition are the ultimate examples of evolutionary guided molecular recognition systems that define the structure and functions of living organisms. Explicit use of biomolecules as auxiliary units to command the molecular assemblies of functional molecules is an intriguing exercise in the scheme of molecular architectonics. In this minireview, we discuss the implementation of the principles of molecular architectonics for the development of novel biomaterials with functional properties and applications ranging from sensing, drug delivery to neurogeneration and tissue engineering. We present the molecular designs pioneered by our group owing to the requirement and scope of the article while acknowledging the designs pursued by several research groups that befit the concept.

Chloride-promoted self-assembly and photoluminescence of naphthalene diimides tethered to polyacetylene

A novel polyacetylene containing naphthalene diimides (NDIs) in the side chains is sensitive to Cl̄ by structural transformation of the polymer backbone and the NDI aggregates along with turning fluorescence emission on.

The pH- and salt-controlled self-assembly of [1]benzothieno[3,2-b][1]-benzothiophene–peptide conjugates in supramolecular hydrogels

Salt- and pH-triggered supramolecular hydrogels were obtained from a novel [1]benzothieno[3,2-b][1]benzothiophene (BTBT)-peptide hybrid.

Synthesis of Heterocyclic Core-Expanded Bis-Naphthalene Tetracarboxylic Diimides

A highly reactive bis-naphthalene tetracarboxylic diimide (bis-NDI) intermediate, TBrDNDI, was designed and synthesized for core-expanded NDIs. Based on this intermediate, we achieved 9- and 11-membered core-expanded bis-NDI derivatives. Through expanding the NDI core and introducing electron-donor or electron-acceptor groups, the frontier energy orbitals, optical and electrical properties of these bis-NDIs can be finely tuned to obtain air-stable ambipolar or n-type materials.

Assembly of amino acid containing naphthalene diimide-based molecules: the role of intervening amide groups in self-assembly, gelation, optical and semiconducting properties

Two naphthalene diimide containing molecules, one with a covalently linked peptide (P1) and the other with a covalently attached amino acid residue and a diamine moiety (P2), have been chosen in such a way that the number of intervening amide groups and the centrally located imide moieties are the same, and their molecular formulae are also identical. However, the positions of the amide groups are different in these two molecules and this can dictate a different behaviour in molecular assembly and gelation processes for each of the individual NDI-appended peptide (P1) and pseudo-peptide (P2). The molecule P1 with an attached peptide moiety and the intervening -CO-NH groups forms an organogel in a mixture of chloroform-methylcyclohexane at a very rapid rate and the mechanical strength of the gel is quite high, whereas the molecule P2, containing the amino acid and diamide moieties, and with the intervening -NH-CO groups forms an organogel in a relatively much slower rate in chloroform-methylcyclohexane mixture. The mechanical strength of the P2 gel is significantly lower compared to that of the P1 gel at the same concentration and solvent system. The minimum gelation concentration of P1 is much smaller than that of P2 in the same solvent system. The thermal stability of the P1 gel is higher than that of the P2 gel at the same concentration and solvent system. However, both of these gels form J-type aggregates in a mixture of chloroform-methylcyclohexane with a red shift in the UV-vis spectrum. The gelator P1 exhibits enhanced fluorescence compared to that of P2 at a fixed concentration and in the same solvent system (mixture of chloroform-methylcyclohexane, 5 : 95 (v/v)). The lifetime and quantum yield of the P1 gel are also significantly higher than those of the P2 gel under similar gelation conditions. Moreover, both P1 and P2 are found to exhibit significant semiconducting behaviours in their dried/xerogel states. It is important to note that the stronger gel P1 exhibits relatively better semiconducting behaviour than the weak gel P2. Interestingly, the self-assembly, gelation, photoluminescence and electrical conductivity are different for the gels obtained from these two molecules. This indicates the role of the amide bond and its linkage (whether -CONH/-NHCO) in the self-assembly, gelation and optoelectronic behaviour of these molecules in their assembled states.

Architectonics: Design of Molecular Architecture for Functional Applications

The term architectonics has its roots in the architectural and philosophical (as early as 1600s) literature that refers to "the theory of structure" and "the structure of theory", respectively. The concept of architectonics has been adapted to advance the field of molecular self-assembly and termed as molecular architectonics. In essence, the methodology of organizing molecular units in the required and controlled configurations to develop advanced functional systems for materials and biological applications comprises the field of molecular architectonics. This concept of designing noncovalent systems enables to focus on different functional aspects of designer molecules for biological and nonbiological applications and also strengthens our efforts toward the mastery over the art of controlled molecular self-assemblies. Programming complex molecular interactions and assemblies for specific functions has been one of the most challenging tasks in the modern era. Meticulously ordered molecular assemblies can impart remarkable developments in several areas spanning energy, health, and environment. For example, the well-defined nano-, micro-, and macroarchitectures of functional molecules with specific molecular ordering possess potential applications in flexible electronics, photovoltaics, photonic crystals, microreactors, sensors, drug delivery, biomedicine, and superhydrophobic coatings, among others. The functional molecular architectures having unparalleled properties are widely evident in various designs of Nature. By drawing inspirations from Nature, intended molecular architectures can be designed and developed to harvest various functions, as there is an inexhaustible resource and scope. In this Account, we present exquisite designer molecules developed by our group and others with an objective to master the art of molecular recognition and self-assembly for functional applications. We demonstrate the tailor-ability of molecular self-assemblies by employing biomolecules like amino acids and nucleobases as auxiliaries. Naphthalenediimide (NDI), perylenediimide (PDI), and few other molecular systems serve as functional modules. The effects of stereochemistry and minute structural modifications in the molecular designs on the supramolecular interactions, and construction of self-assembled zero-dimensional (OD), one-dimensional (1D), and two-dimensional (2D) nano- and microarchitectures like particles, spheres, cups, bowls, fibers, belts, helical belts, supercoiled helices, sheets, fractals, and honeycomb-like arrays are discussed in extensive detail. Additionally, we present molecular systems that showcase the elegant designs of coassembly, templated assembly, hierarchical assembly, transient self-assembly, chiral denaturation, retentive helical memory, self-replication, supramolecular regulation, supramolecular speciation, supernon linearity, dynamic pathway complexity, supramolecular heterojunction, living supramolecular polymerization, and molecular machines. Finally, we describe the molecular engineering principles learnt over the years that have led to several applications, namely, organic electronics, self-cleaning, high-mechanical strength, and tissue engineering.

Solid-state electrical applications of protein and peptide based nanomaterials

This review summarizes recent advancements in electrical properties and applications of natural proteins and mutated variants, synthetic oligopeptides and peptide–π conjugates.

Redox-sensitive reversible self-assembly of amino acid-naphthalene diimide conjugates

Peptide and low molecular weight amino acid-based materials that self-assemble in response to environmental triggers are highly desirable candidates in forming functional materials with tunable biophysical properties. In this paper, we explore redox-sensitive self-assembly of cationic phenylalanine derivatives conjugated to naphthalene diimide (NDI). Self-assembly of the cationic Phe-NDI conjugates into nanofibrils was induced in aqueous solvent at high ionic strength. Under reducing conditions, these self-assembled Phe-NDI conjugate fibrils underwent a morphological change to non-fibril aggregates. Upon reoxidation, the initially observed fibrils were reformed. The study herein provides an interesting strategy to effect reversible switching of the structure of supramolecular materials that can be applied to the development of sophisticated stimulus-responsive materials.

Synthetic minimalistic tryptophan zippers as a chiroptical switch

Supramolecular helices with left and right handed chirality were designed and synthesized based on l-tryptophan that undergo helical inversion upon addition of H₂PO₄⁻.

Solid surface vs. liquid surface: nanoarchitectonics, molecular machines, and DNA origami

Comparisons of science and technology between these solid and liquid surfaces would be a good navigation for current-to-future developments.

Nanoarchitectonics of Small Molecule and DNA for Ultrasensitive Detection of Mercury

Reliable and ultrasensitive detection of mercury ions is of paramount importance for toxicology assessment, environmental protection, and human health. Herein, we present a novel optoelectronic approach based on nanoarchitectonics of small-molecule templated DNA system that consists of an adenine (A)-conjugated small organic semiconductor (BNA) and deoxyribo-oligothymidine (dT_n). This mutually templated dynamic chiral coassembly system (BNAn-dT_n) with tunable chiroptical, morphological, and electrical properties is tapped in to enable ultrasensitive and selective detection of inorganic and organometallic mercury in water. We observe a rapid transformation of the BNA_n-dT_n coassembly into a metallo-DNA duplex [dT-Hg-dT]_n in the presence of mercury, which is utilized for a chiro-optical and conductivity-based rapid and subnanomolar sensitivity (≥0.1 nM, 0.02 ppb) to mercury ions in water (∼100 times lower than United States Environmental Protection Agency tolerance limit). This ultrasensitive detection of inorganic and organometallic mercury is driven by a novel chemical design principle that allows strong mercury thymine interaction. This study is anticipated to inspire the development of future templated DNA nanotechnology-based optoelectronic devices for the rapid and ultrasensitive detection of numerous other toxic analytes.

Charge Transfer Modulated Self-Assembly in Poly(aryl ether) Dendron Derivatives with Improved Stability and Transport Characteristics

Alteration of native gelation properties of anthracene and pyrene cored first generation poly(aryl ether) dendrons, G1-An and G1-Py, by introducing a common acceptor, 2,4,7-trinitro-9H-fluoren-9-one (TNF), results in forming charge transfer gels in long chain alcoholic solvents. This strategy leads to significant perturbation of optical and electronic properties within the gel matrix. Consequently, a noticeable increase of their electrical conductivities is observed, making these poly(aryl ether) dendron based gels potential candidates for organic electronics. While the dc-conductivity (σ) value for the native gel from G1-An is 2.8 × 10^-4 S m^-1, the value increased 3 times (σ = 8.7 × 10^-4 S m^-1) for its corresponding charge transfer gel. Further, the dc-conductivity for the native gel self-assembled from G1-Py dramatically enhanced by approximately an order of magnitude from 4.9 × 10^-4 to 1.3 × 10^-3 S m^-1, under the influence of an acceptor. Apart from H-bonding and π···π interactions, charge transfer results in the formation of a robust 3D network of fibers, with improved aspect ratio, providing high thermo-mechanical stability to the gels compared to the native ones. The charge transfer gels self-assembled from G1-An/TNF (1:1) and G1-Py/TNF exhibit a 7.3- and 2.5-fold increase in their yield stress, respectively, compared to their native assemblies. A similar trend follows in the case of their thermal stabilities. This is attributed to the typical bilayer self-assembly of the former which is not present in the case of G1-Py/TNF charge transfer gel. Density functional calculations provide deeper insights accounting for the role of charge transfer interactions in the mode of self-assembly. The 1D potential energy surface for the G1-An/TNF dimer and G1-Py/TNF dimer is found to be 11.8 and 1.9 kcal mol^-1 more stable than their corresponding native gel dimers, G1-An/G1-An and G1-Py/G1-Py, respectively.

Molecular Architectonics of Naphthalenediimides for Efficient Structure-Property Correlation

We present a bioinspired design strategy to effectively tailor the assembly of naphthalenediimides (NDIs) into a wide variety of architectures by functionalizing with amino acid derivatives. This bioinspired process of custom designing and engineering molecular assemblies is termed "bioinspired architectonics". By employing minute structural mutations in the form of α-substituents of amino acids, we successfully engineered molecular assembly of NDIs into zero-dimensional (0D, spheres), one-dimensional (1D, fibers), and two-dimensional (2D, sheets) architectures. The 2D sheets of phenylalanine methylester appended NDI 1 showed remarkable bulk electron mobility of up to 1 cm(2) V(-1)s(-1). With the aid of photophysical, diffraction, and microscopy techniques we rationalize the effect of molecular structure with their ordering and electronic properties in an effort to find structure-property correlations via a bioinspired modular approach.

The Way to Nanoarchitectonics and the Way of Nanoarchitectonics

The critical differences between microtechnology and nanotechnology are discussed, and the necessity of a new paradigm, nanoarchitectonics, is proposed for the future development of nanotechnology. An important task in material fabrication is to harmonize various factors and effects, and to combine them into functional nanomaterials and nanosystems. It is the way of architectonics rather than that of an individual technology. Therefore, a novel terminology, nanoarchitectonics (nano + architecto +nics) has been proposed as a new paradigm of materials science and technology on the nanoscale. The statement by Feynman that "there's plenty of room at the bottom" is really true. With nanoarchitectonics in our hands, we can re-open the door to Feynman's huge room.