Supramolecular light-harvesting systems utilizing tetraphenylethylene chromophores as antennas

Efficient utilization of light energy is crucial for various technological applications ranging from solar energy conversion to optoelectronic devices. Supramolecular light-harvesting systems (LHS) have emerged as promising platforms for enhancing light absorption and energy transfer process. In this Feature Article, we highlight the utilization of tetraphenylethylene (TPE) chromophores as antennas in supramolecular assemblies for light harvesting applications. TPE, as an archetypal aggregation-induced emission (AIE) chromophore, offers unique advantages such as high photostability and efficient light-harvesting capabilities upon self-assembly. We discuss the design principles and synthetic strategies employed to construct supramolecular assemblies incorporating TPE chromophores, elucidating their roles as efficient light-harvesting antennas. Furthermore, we delve into the mechanisms governing energy transfer processes within these assemblies, such as Förster resonance energy transfer (FRET). The potential applications of these TPE-based supramolecular systems in various fields, including photocatalysis, reactive oxygen species generation, optoelectronic devices and sensing, are explored. Finally, we provide insights into future directions and challenges in the development of next-generation supramolecular LHSs utilizing TPE chromophores.

Exploring the self-assembly dynamics of novel steroid-coumarin conjugates: a comprehensive spectroscopic and solid-state investigation

The design, synthesis, and characterization of seven novel steroid-coumarin conjugates with diverse steroidal nuclei as lipophilic fluorescent materials for bioimaging applications are presented. The conjugates were synthesized through amidation, characterized using spectroscopic and spectrometric methods, and their main photophysical properties were determined. Dioxane : water titration experiments revealed their ability to self-assemble, forming J-aggregates as evidenced by new spectral bands at higher wavelengths. Monocrystal X-ray diffraction analysis disclosed distinctive aggregation patterns exhibiting J- or H-aggregates for selected compounds. Bioimaging studies demonstrated cell membrane localization for most conjugates, with some of them displaying an interesting selectivity for lipid droplets. Notably, the presence of the steroid fragments significantly influenced both the self-assembly patterns and the cellular localization of the fluorescent probes.

Self-Assembly of an Amphiphilic Bile Acid Dimer: A Combined Experimental and Theoretical Study of Its Medium-Responsive Fluorescence

This work describes the synthesis and aggregation behavior of a dimeric bile acid derivative in which two steroid cores are bridged by a p-di(phenylethynyl)phenylene fluorophore. The studied compound contains three key characteristics: (a) restricted conformational equilibrium in solution, (b) efficient fluorescence conferred by the bridge, and (c) medium responsiveness encoded in the steroid fragments. The incorporation of the three components afforded a compound that generates nano- and micrometric spherical particles with aggregation-responsive fluorescence emission. The observed self-assembly process of the featured molecule was induced by the gradual addition of water to the tetrahydrofuran (THF) solution. This aggregation led to significant changes in fluorescence that went from two bands at λ_em values of 370 and 390 nm in pure THF to a new spectrum with two maxima at λ_em values of 395 and 418 nm at high water contents, without a decrease in emission. The observed changes can be ascribed to weakly coupled aggregation, a hypothesis supported by multiscale molecular modeling, which sheds light on the mechanism of the self-assembly of this unconventional amphiphile.

The construction of an artificial light-harvesting system with two-step sequential energy transfer based on supramolecular polymers

An artificial light-harvesting system with two-step sequential energy transfer was constructed in aqueous media based on cyano-substituted p-phenylenevinylene derivative (PPTA) and bis-(p-sulfonatocalix[4]arenes) (BSC4) supramolecular polymers formed through host-guest interactions, in which two different fluorescent dyes, eosin Y (EY) and sulforhodamine (SR101), were employed as energy acceptors. The obtained artificial light-harvesting system can achieve an efficient two-step energy transfer process from PPTA-BSC4 to EY and then to SR101 with high energy-transfer efficiencies of up to 36.6% and 40.8%, respectively. More importantly, the harvested energy from the PPTA-BSC4 + EY + SR101 system can be used to promote the dehalogenation of α-bromoacetophenone with a yield of 89% in aqueous solution.

Modulation of Aggregation-Induced Emission by Excitation Energy Transfer: Design and Application

Excitation energy transfer (EET) as a fundamental photophysical process is well-explored for developing functional materials with tunable photophysical properties. Compared to traditional fluorophores, aggregation-induced emission luminogens (AIEgens) exhibit unique advantages for building EET systems, especially serving as energy donors, due to their outstanding photophysical properties such as bright fluorescence in aggregation state, broad absorption and emission spectra, large Stokes shift, and high photobleaching resistance. In addition, the photophysical properties of AIEgens can be modulated by energy transfer for improved luminescence performance. Therefore, a variety of EET systems based on AIEgens have been constructed and their applications in different areas have been explored. In this review, we summarize recent progress in the design strategy of AIE-based energy transfer systems for light-harvesting, fluorescent probes and theranostic systems, with an emphasis on design strategies to achieve desirable properties. The limitations, challenges and future opportunities of AIE-EET systems are briefly outlined. Design strategies and applications (light-harvesting, fluorescent probe and theranostics) of AIEgen-based excitation energy systems are discussed in this review.

Two-Photon Absorbing AIEgens: Influence of Stereoconfiguration on Their Crystallinity and Spectroscopic Properties and Applications in Bioimaging

This paper aims at designing chromophores with efficient aggregation-induced emission (AIE) properties for two-photon fluorescence microscopy (2PFM), which is one of the best-suited types of microscopy for the imaging of living organisms or thick biological tissues. Tetraphenylethylene (TPE) derivatives are common building blocks in the design of chromophores with efficient AIE properties. Therefore, in this study, extended TPE AIEgens specifically optimized for two-photon absorption (2PA) are synthesized and the resulting (E/Z) isomers are separated using chromatography on chiral supports. Comparative characterization of the AIE properties is performed on the pure (Z) and (E) isomers and the mixture, allowing us, in combination with powder X-ray diffraction and solid-state NMR, to document a profound impact of crystallinity on solid-state fluorescence properties. In particular, we show that stereopure AIEgens form aggregates of superior crystallinity, which in turn exhibit a higher fluorescence quantum yield compared to diastereoisomers mixtures. Preparation of stereopure organic nanoparticles affords very bright fluorescent contrast agents, which are then used for cellular and intravital two-photon microscopy on human breast cancer cells and on zebrafish embryos.

Aggregation induced emission in one easy step: pyridinium AIEgens and counter ion effect

Protonation of pyridines with a strong acid is a general and straightforward approach to achieve efficient aggregation induced emission (AIE) in structurally remarkably simple organic molecules that lack any of the conventional luminophores. The relationship between the nature of counter ion and the AIE efficiency is demonstrated. The superiority of the perchlorate counter ion is attributed to efficient stabilization of the key intermolecular π+-π interactions between neighboring luminophore molecules in the crystal lattice.

Transforming the spleen into a liver-like organ in vivo

Regenerating human organs remains an unmet medical challenge. Suitable transplants are scarce, while engineered tissues have a long way to go toward clinical use. Here, we demonstrate a different strategy that successfully transformed an existing, functionally dispensable organ to regenerate another functionally vital one in the body. Specifically, we injected a tumor extract into the mouse spleen to remodel its tissue structure into an immunosuppressive and proregenerative microenvironment. We implanted autologous, allogeneic, or xenogeneic liver cells (either primary or immortalized), which survived and proliferated in the remodeled spleen, without exerting adverse responses. Notably, the allografted primary liver cells exerted typical hepatic functions to rescue the host mice from severe liver damages including 90% hepatectomy. Our approach shows its competence in overcoming the key challenges in tissue regeneration, including insufficient transplants, immune rejection, and poor vascularization. It may be ready for translation into new therapies to regenerate large, complex human tissue/organs.

Multi-Stimuli Responsive FRET Processes of Bifluorophoric AIEgens in an Amphiphilic Copolymer and Its Application to Cyanide Detection in Aqueous Media

A novel amphiphilic aggregation-induced emission (AIE) copolymer, that is, poly(NIPAM-co-TPE-SP), consisting of N-isopropylacrylamide (NIPAM) as a hydrophilic unit and a tetraphenylethylene-spiropyran monomer (TPE-SP) as a bifluorophoric unit is reported. Upon UV exposure, the close form of non-emissive spiropyran (SP) in poly(NIPAM-co-TPE-SP) can be photo-switched to the open form of emissive merocyanine (MC) in poly(NIPAM-co-TPE-MC) in an aqueous solution, leading to ratiometric fluorescence of AIEgens between green TPE and red MC emissions at 517 and 627 nm, respectively, via Förster resonance energy transfer (FRET). Distinct FRET processes of poly(NIPAM-co-TPE-MC) can be observed under various UV and visible light irradiations, acid-base conditions, thermal treatments, and cyanide ion interactions, which are also confirmed by theoretical studies. The subtle perturbations of environmental factors, such as UV exposure, pH value, temperature, and cyanide ion, can be detected in aqueous media by distinct ratiometric fluorescence changes of the FRET behavior in the amphiphilic poly(NIPAM-co-TPE-MC). Moreover, the first FRET sensor polymer poly(NIPAM-co-TPE-MC) based on dual AIEgens of TPE and MC units is developed to show a very high selectivity and sensitivity with a low detection limit (LOD = 0.26 μM) toward the cyanide ion in water, which only contain an approximately 1% molar ratio of the bifluorophoric content and can be utilized in cellular bioimaging applications for cyanide detections.

Supramolecular materials based on AIE luminogens (AIEgens): construction and applications

The emergence of aggregation-induced emission luminogens (AIEgens) has significantly stimulated the development of luminescent supramolecular materials because their strong emissions in the aggregated state have resolved the notorious obstacle of the aggregation-caused quenching (ACQ) effect, thereby enabling AIEgen-based supramolecular materials to have a promising prospect in the fields of luminescent materials, sensors, bioimaging, drug delivery, and theranostics. Moreover, in contrast to conventional fluorescent molecules, the configuration of AIEgens is highly twisted in space. Investigating AIEgens and the corresponding supramolecular materials provides fundamental insights into the self-assembly of nonplanar molecules, drastically expands the building blocks of supramolecular materials, and pushes forward the frontiers of supramolecular chemistry. In this review, we will summarize the basic concepts, seminal studies, recent trends, and perspectives in the construction and applications of AIEgen-based supramolecular materials with the hope to inspire more interest and additional ideas from researchers and further advance the development of supramolecular chemistry.

Aggregation-induced emission-based ionic liquids for bacterial killing, imaging, cell labeling, and bacterial detection in blood cells

A series of aggregation-induced emission (AIE)-based imidazolium-type ionic liquids (ILs) were designed and synthesized for bacterial killing and imaging, cell labeling, and bacterial detection in blood cells. The AIE-based ILs showed antibacterial activities against both Escherichia coli and Staphylococcus aureus. The carbon chain length of substitution at the N3 position of the imidazolium cations highly affects the antibacterial properties of ILs. Owing to their AIE characteristics, the ILs could selectively capture fluorescence image of dead bacteria while killing the bacteria. The fluorescence intensity varied with the concentration of bacteria, indicating that AIE-based ILs has potential as an antibacterial material and an efficient probe for bacterial viability assay. In addition, the synthesized AIE-based ILs exhibit relatively low cytotoxicity and hemolysis rate and therefore potential for cell labeling, as well as bacterial detection in blood cells. STATEMENT OF SIGNIFICANCE: Bacteria are ubiquitous, especially the pathogenic bacteria, which pose a serious threat to human health. There is an urgent need for materials with efficient antibacterial properties and biocompatibility and without causing drug resistance. In this work, we synthesized a series of aggregation-induced emission (AIE)-doped imidazolium type ionic liquids (ILs) with multifunction potential of bacterial killing and imaging, cell labeling, and detection of bacteria from blood cells. The synthesized AIE-based ILs can image dead bacteria at the same time of killing these bacteria, which can avoid the fluorescent dyeing process. Simultaneously, the fluorescent imaging of dead bacteria can be distinguished by the naked eye, and the fluorescence intensity from the AIE-based ILs varied with the concentration of bacteria. In addition, the AIE-based ILs exhibit relatively low cytotoxicity and hemolysis rate and therefore potential for cell labeling as well as detection of bacteria from red blood cell suspension.

Self-Assembly of Aggregation-Induced-Emission Molecules

The last decade has witnessed rapid developments in aggregation-induced emission (AIE). In contrast to traditional aggregation, which causes luminescence quenching (ACQ), AIE is a reverse phenomenon that allows robust luminescence to be retained in aggregated and solid states. This makes it possible to fabricate various highly efficient luminescent materials, which opens new paradigms in a number of fields, such as imaging, sensing, medical therapy, light harvesting, light-emitting devices, and organic electronic devices. Of the various important features of AIE molecules, their self-assembly behavior is very attractive because the formation of a well-defined emissive nanostructure may lead to advanced applications in diverse fields. However, due to the nonplanar topology of AIEgens, it is not easy for them to self-assemble into well-defined structures. To date, some strategies have been proposed to achieve the self-assembly of AIEgens. Herein, we summarize the most recent approaches for the self-assembly of AIE molecules. These approaches can be sorted into two classes: 1) covalent molecular design and 2) noncovalent supramolecular interactions. We hope this will inspire more excellent work in the field of AIE.

Configuration-Controllable E/Z Isomers Based on Tetraphenylethene: Synthesis, Characterization, and Applications

Configuration-controllable E/Z isomers based on tetraphenylethene were prepared with a facile and effective method. First, compounds 1 and 2, configuration-controllable precursors of E/Z isomers, were synthesized. Then, pure E/Z isomers were obtained via Suzuki reaction, avoiding the difficulties of separation. The conformational changes of E/Z isomers can occur through photoactivation. Importantly, red-shifts of 66 nm from 6 (E-) to 3 (Z-) and 58 nm from 7 (E-) to 4 (Z-) were observed remarkably on the photoluminescence (PL) emission spectra. The Z isomer showed a longer fluorescence lifetime compared with the E isomer. The Z isomers 3 and 4 exhibited piezofluorochromism under grinding, whereas the E isomers 6 and 7 showed no such behaviors. The E isomer has better thermal stability than the Z isomer. Lastly, graphene-like molecules were synthesized with the FeCl₃/CH₃NO₂ system. The E and Z isomers after oxidation showed negligible differences in the PL emission spectra because the effective conjugated lengths of oxidized E and Z isomers were both extended. Furthermore, the fabricated field-effect transistors showed nice performance with mobilities of 0.92 and 1.14 cm^-2 V^-1 s^-1 at low operating voltages, respectively.

Cation–π interactions secure aggregation induced emission of planar organic luminophores

The use of non-covalent intermolecular π⁺–π interactions between quaternary pyridinium or imidazolium cations and aromatic π systems is an efficient approach to achieve AIE in planar purely organic luminophores.

Understanding complex supramolecular landscapes: non-covalent macrocyclization equilibria examined by fluorescence resonance energy transfer

As molecular self-assembled systems increase in complexity, due to a large number of participating entities and/or the establishment of multiple competing equilibria, their full understanding becomes likewise more complicated, and the use of diverse analytical techniques that can afford complementary information is required. We demonstrate in this work that resonance excitation energy transfer phenomena, measured by fluorescence spectroscopy in combination with other optical spectroscopies, can be a valuable tool to obtain supplementary thermodynamic data about complex supramolecular landscapes that other methods fail to provide. In particular, noncovalent macrocyclization processes of lipophilic dinucleosides are studied here by setting up a competition between intra- and intermolecular association processes of Watson-Crick H-bonding pairs. Multiwavelength analysis of the monomer emission changes allowed us to determine cyclotetramerization constants and to quantify chelate cooperativity, which was confirmed to be substantially larger for the G-C than for the A-U pair. Furthermore, when bithiophene-BODIPY donor-acceptor energy transfer probes are employed in these competition experiments, fluorescence and circular dichroism spectroscopy measurements in different regions of the visible spectrum additionally reveal intermolecular interactions occurring simultaneously at both sides of the macrocyclization reaction: the cyclic product, acting as a host for the competitor, and the monomer reactant, ultimately leading to macrocycle denaturation.

A dual pH-responsive supramolecular gelator with aggregation-induced emission properties

Functionalising AIE-active aromatic thioethers with self-complementary zwitterionic binding sites leads to a dual pH-responsive supramolecular organogelator with aggregation-induced emission (AIE) properties. The self-assembled fibrillar gel network is highly fluorescent (λem = 490 nm), whereas the addition of both acid and base leads to the sol state with a loss of emission. More over, the gel was found to be thermo- and mechanoresponsive.

Fluorescent Polymersomes with Aggregation-Induced Emission

Fluorescent polymersomes are interesting systems for cell/tissue imaging and in vivo study of drug distribution and delivery. We report on bright fluorescent polymersomes with aggregation-induced emission self-assembled by a series of tetraphenylethylene (TPE)-containing amphiphilic biodegradable block copolymers, where the hydrophilic block is a polyethylene glycol and hydrophobic block is a TPE-substituted trimethylenecarbonate polymer P(TPE-TMC). Their self-assemblies in water were prepared by nanoprecipitation using dioxane or tetrahydrofuran as co-solvent, and the self-assembling processes were studied in detail by cryo-electron microscopy, dynamic light scattering, and spectrofluorometer. The polymersomes are formed via the closure of bilayer lamellae self-assembled first by amphiphilic block copolymers. The polymersome membrane affords a nanosize bright fluorescent system with self-assembly induced emission in the thickness scale of 10-15 nm. The control of the whole size of polymersome is achieved by the choice of co-solvent for self-assembling and by the design of a suitable hydrophilic/hydrophobic ratio of block copolymers. These polymersomes can be potentially used as a stable fluorescent tool to monitor the transportation and distribution of drugs and bioconjugates in living cells.

Tunable photo-luminescence behaviors of macrocycle-containing polymer networks in the solid-state

Two porous polymers were synthesized from tetraphenylethylene (TPE) crosslinked β-cyclodextrins (β-CD) and sulfonatocalix[4]arene (SC4A).

Tetraphenylethylene-Induced Cross-Linked Vesicles with Tunable Luminescence and Controllable Stability

Luminescence-tunable vesicles (LTVs) are becoming increasingly attractive for their potential application in optics, electronics, and biomedical technology. However, for real applications, luminous efficiency and durability are two urgent constraints to be overcome. Combining the advantages of aggregation-induced emission in luminous enhancement and cross-linking in stability, we herein fabricated tetraphenylethylene-induced cross-linked vesicles with an entrapped acceptor of RhB (TPE-CVs@RhB), which achieved a high-efficiency multicolor emission of the visible spectrum, including white, by altering the amount of entrapped acceptor. Stability tests show that the luminescence of TPE-CVs@RhB has excellent environmental tolerance toward heating, dilution, doping of organic solvent, and storage in serum. Further outstanding performance in the application of fluorescent inks suggests that the new LTVs hold high potential in industrialization. More attractively, although the TPE-CVs@RhB can tolerate various harsh conditions, their stability can actually be controlled through the cross-linker adopted. For example, the employment of dithiothreitol in the present work produces an acid-labile β-thiopropionate linker. The cellular uptake by HepG2 cells shows that the acid-labile TPE-CVs@RhB can effectively respond to the acidic environment of cancer cells and release the entrapped RhB molecules, indicative of promising applications of this new type of LTVs in bioimaging and drug delivery.

Supramolecular amphiphiles based on cyclodextrin and hydrophobic drugs

Herein we report a novel “supra-prodrug-type” superamphiphile design: via a redox-sensitive self-immolative linker, a hydrophobic drug molecule was labeled with an azobenzene moiety, which was designed to be capped by a hydrophilic cyclodextrin (CD) molecule.

E/Z isomerization effects on aggregation-enhanced emission of tetraphenylethene derivatives assisted by host–guest recognition

Pure E and Z stereoisomers of tetraphenylethene derivatives functionalized with dibenzylamine groups were isolated. Both supramolecular polymerization and photophysical changes were more significant in the case of the former than in the latter.

Fabrication of Propeller-Shaped Supra-amphiphile for Construction of Enzyme-Responsive Fluorescent Vesicles

Propeller-shaped molecules have been recognized to display fantastic AIE (aggregation induced emission), but they can hardly self-assemble into nanostructures. Herein, we for the first time report that ionic complexation between a water-soluble tetrapheneyl derivative and an enzyme substrate in aqueous media produces a propeller-shaped supra-amphiphile that self-assembles into enzyme responsive fluorescent vesicles. The supra-amphiphile was fabricated upon complexation between a water-soluble propeller-shaped AIE luminogen TPE-BPA and myristoylcholine chloride (MChCl) in aqueous media. MChCl filled in the intramolecular voids of propeller-shaped TPE-BPA upon supra-amphiphile formation, which endows the supra-amphiphile superior self-assembling ability to the component molecules thus leading to the formation of fluorescent vesicles. Because MChCl is the substrate of cholinesterases, the vesicles dissemble in the presence of cholinesterases, and the fluorescent intensity can be correlated to the level of enzymes. The resulting fluorescent vesicles may be used to recognize the site of Alzheimer's disease, to encapsulate the enzyme inhibitor, and to release the inhibitor at the disease site.

Fluorescent vesicles formed by simple surfactants induced by oppositely-charged carbon quantum dots

Fluorescent vesicles can be constructed by mixing oppositely-charged CQDs and simple surfactants in water.

Facile creation of FRET systems from a pH-responsive AIE fluorescent vesicle

We demonstrate a facile approach to constructing aggregation induced emission (AIE) fluorescent vesicles for creation of FRET systems.

Main chain poly(bile acid) directed plasmonic nanospheres with amphiphilic binding pockets and photo-triggered destruction

A series of sulfide-bridged main chain poly(bile acid)s were developed and biologically sourced amphiphilic homopolymer-directed plasmonic nanospheres and their properties were investigated.

Tailoring luminescence color conversion via affinitive co-assembly of glutamates appended with pyrene and naphthalene dicarboximide units

Co-assembled vesicles constructed from two glutamic acid derivatives display concentration-dependent energy transfer along with multiple color emissions.

Construction, Enzyme Response, and Substrate Capacity of a Hyaluronan-Cyclodextrin Supramolecular Assembly

A supramolecular assembly was constructed with a cationic cyclodextrin (EICD) and native hyaluronan (HA). The cationic carboxylic ester pendants on HA support hyaluronidase (HAase)-responsive sites and the EICD supports artificial carboxylic esterase responsive sites. Substrate-binding models were investigated by using environment-sensitive fluorescence probes 2-p-toluidino-6-naphthalenesulfoniate sodium (2,6-TNS) and thioflavin T (ThT). On a HA/EICD assembly, EICD was able to bind an anionic substrate and HA and EICD constructed the cationic substrate binding site together. This assembly could be used as a sequential dual-substrate carrier.

A ratiometric fluorescent system for carboxylesterase detection with AIE dots as FRET donors

A ratiometric fluorescence CaE assay was developed with AIE dots as donors in the FRET process for the first time, which is capable of detecting esterase in human serum.

Di(naphthalen-2-yl)-1,2-diphenylethene-based conjugated polymers: aggregation-enhanced emission and explosive detection

Conjugated polymers with rotatable naphthalen-2-yl pendants show aggregation-enhanced emission characteristics and explosive detection potential.