Electrochemical water oxidation reaction by dinuclear Re(V) oxo complexes with a 1,4-benzoquinone core via the redox induced electron transfer (RIET) process

We report two dinuclear rhenium(V) oxo complexes 1 and 2 types, [ReV(O)(Cl)3(L2-)ReV(O)(Cl)3][NBu4]2 (1, L2- = dianionic 2,5-dihydroxy 1,4-benzoquinone (DBQ2-)) and (2, L2- = dianionic chloranilic acid (CA2-) ligands), as a homogeneous electrocatalyst for water oxidation reactions in the acetonitrile-water mixture. The evolution of dioxygen gas at the anode was confirmed by a GC-TCD study. In controlled potential electrolysis (CPE), oxidation at 1.30 V (vs. Ag/AgCl) at neutral pH, 1 and 2 afforded 1+ [ReVI(O)(Cl)3(DBQ˙3-)ReVI(O)(Cl)3]- and 2+ [ReVI(O)(Cl)3(CA˙3-)ReVI(O)(Cl)3]- ions, respectively, via the redox induced electron transfer (RIET) process. Electrochemically generated species of 1+ and 2+ could be isolated in dry acetonitrile. 1+ and 2+ ions give strong EPR signals in fluid solution as well as under frozen glass conditions due to the [ReVI(O)(Cl)3(L˙3-)ReVI(O)(Cl)3]- ↔ [ReVI(O)(Cl)3(L2-)ReV(O)(Cl)3]- (where L2- = DBQ2- and CA2-) equilibrium. However, the continuation of the CPE study (1.30 V vs. Ag/AgCl) in the presence of acetonitrile-water mixture oxidised the in situ generated species of 1+ and 2+ to higher valent ReVIO species. These species (1+ and 2+) bound water through the water nucleophilic attack (WNA) to produce peroxide intermediate species of [ReV(OOH)(Cl)3(DBQ2-)ReV(OOH)(Cl)3] (A1) and [ReV(OOH)(Cl)3(CA2-)ReV(OOH)(Cl)3] (A2) for catalysts 1 and 2, respectively. Interestingly, A1 and A2 were authenticated and analysed by ESI mass spectrometry and infrared spectroscopy and were the active precursors of this water oxidation process. The extent of current generation under similar conditions suggested that complex 1 is superior to complex 2 for the water oxidation reaction. Notably, the maximum turnover frequency (TOFmax) of catalysts 1 and 2 were 2.1 and 1.6 s-1 at 0.27 V and 0.24 V over potential, respectively, which is very significant in WOR.

Earth Abundant Oxidation Catalysts for Removal of Contaminants of Emerging Concern from Wastewater: Homogeneous Catalytic Screening of Monomeric Complexes

Twenty novel Mn, Fe, and Cu complexes of ethylene cross-bridged tetraazamacrocycles with potentially copolymerizable allyl and benzyl pendant arms were synthesized and characterized. Multiple X-ray crystal structures demonstrate the cis-folded pseudo-octahedral geometry forced by the rigidifying ethylene cross-bridge and show that two cis coordination cites are available for interaction with substrate and oxidant. The Cu complexes were used to determine kinetic stability under harsh acidic and high-temperature conditions, which revealed that the cyclam-based ligands provide superior stabilization with half-lives of many minutes or even hours in 5 M HCl at 50-90 °C. Cyclic voltammetry studies of the Fe and Mn complexes reveal reversible redox processes indicating stabilization of Fe2+/Fe3+ and Mn2+/Mn3+/Mn4+ oxidation states, indicating the likelihood of catalytic oxidation for these complexes. Finally, dye-bleaching experiments with methylene blue, methyl orange, and rhodamine B demonstrate efficient catalytic decolorization and allow selection of the most successful monomeric catalysts for copolymerization to produce future heterogeneous water purification materials.

Synthesis and Characterization of Late Transition Metal Complexes of Mono-Acetate Pendant Armed Ethylene Cross-Bridged Tetraazamacrocycles with Promise as Oxidation Catalysts for Dye Bleaching

Ethylene cross-bridged tetraazamacrocycles are known to produce kinetically stable transition metal complexes that can act as robust oxidation catalysts under harsh aqueous conditions. We have synthesized ligand analogs with single acetate pendant arms that act as pentadentate ligands to Mn, Fe, Co, Ni, Cu, and Zn. These complexes have been synthesized and characterized, including the structural characterization of four Co and Cu complexes. Cyclic voltammetry demonstrates that multiple oxidation states are stabilized by these rigid, bicyclic ligands. Yet, redox potentials of the metal complexes are modified compared to the "parent" ligands due to the pendant acetate arm. Similarly, gains in kinetic stability under harsh acidic conditions, compared to parent complexes without the pendant acetate arm, were demonstrated by a half-life seven times longer for the cyclam copper complex. Due to the reversible, high oxidation states available for the Mn and Fe complexes, the Mn and Fe complexes were examined as catalysts for the bleaching of three commonly used pollutant model dyes (methylene blue, methyl orange, and Rhodamine B) in water with hydrogen peroxide as oxidant. The efficient bleaching of these dyes was observed.

Homogeneous Water Oxidation Catalyzed by First-Row Transition Metal Complexes: Unveiling the Relationship between Turnover Frequency and Reaction Overpotential

The utilization of earth-abundant low-toxicity metal ions in the construction of highly active and efficient molecular catalysts promoting the water oxidation reaction is important for developing a sustainable artificial energy cycle. However, the kinetic and thermodynamic properties of the currently available molecular water oxidation catalysts (MWOCs) have not been comprehensively investigated. This Review summarizes the current status of MWOCs based on first-row transition metals in terms of their turnover frequency (TOF, a kinetic property) and overpotential (η, a thermodynamic property) and uses the relationship between log(TOF) and η to assess catalytic performance. Furthermore, the effects of the same ligand classes on these MWOCs are discussed in terms of TOF and η, and vice versa. The collective analysis of these relationships provides a metric for the direct comparison of catalyst systems and identifying factors crucial for catalyst design.

Bio-Inspired Molecular Catalysts for Water Oxidation

The catalytic tetranuclear manganese-calcium-oxo cluster in the photosynthetic reaction center, photosystem II, provides an excellent blueprint for light-driven water oxidation in nature. The water oxidation reaction has attracted intense interest due to its potential as a renewable, clean, and environmentally benign source of energy production. Inspired by the oxygen-evolving complex of photosystem II, a large of number of highly innovative synthetic bio-inspired molecular catalysts are being developed that incorporate relatively cheap and abundant metals such as Mn, Fe, Co, Ni, and Cu, as well as Ru and Ir, in their design. In this review, we briefly discuss the historic milestones that have been achieved in the development of transition metal catalysts and focus on a detailed description of recent progress in the field.

Unveiling the High Catalytic Activity of a Dinuclear Iron Complex for the Oxygen Evolution Reaction

The dinuclear iron complex [(H₂O)-Fe^III-(ppq)-O-(ppq)-Fe^III-Cl]³⁺ (Fe^III(ppq), ppq = 2-(pyrid-2'-yl)-8-(1″,10″-phenanthrolin-2″-yl)-quinoline) demonstrates a catalytic activity about one order of magnitude higher than the mononuclear iron complex [Cl-Fe^III(dpa)-Cl]⁺ (Fe^III(dpa), dpa = N,N-di(1,10-phenanthrolin-2-yl)-N-isopentylamine) for the oxygen evolution reaction (OER). However, the mechanism behind such an unusually high activity has remained largely unclear. To solve this puzzle, a decomposition-and-reaction mechanism is proposed for the OER with the dinuclear Fe^III(ppq) complex as the initial state of the catalytic agent. In this mechanism, the high-valent dinuclear iron complex first dissociates into two mononuclear moieties, and the oxidized mononuclear iron complexes directly catalyze the formation of an O-O bond through a nitrate attack pathway with nitrate functioning as a cocatalyst. Density functional theory calculations reveal that it is the electron-deficient microenvironment around the iron center that gives rise to the remarkable catalytic activity observed experimentally. Therefore, the outstanding performance of the Fe^III(ppq) catalyst can be ascribed to the high reactivity of its mononuclear moieties in a high oxidation state, which is concomitant with the structural stability of the low-valent dinuclear complex. The theoretical insights provided by this study could be useful for the optimization and design of novel iron-based water oxidation catalysts.

Electrocatalytic Water Oxidation with α-[Fe(mcp)(OTf)2] and Analogues

The complex α-[Fe(mcp)(OTf)₂] (mcp = N,N′-dimethyl-N,N′-bis(pyridin-2-ylmethyl)-cyclohexane-1,2-diamine and OTf = trifluoromethanesulfonate anion) was reported in 2011 by some of us as an active water oxidation (WO) catalyst in the presence of sacrificial oxidants. However, because chemical oxidants are likely to take part in the reaction mechanism, mechanistic electrochemical studies are critical in establishing to what extent previous studies with sacrificial reagents have actually been meaningful. In this study, the complex α-[Fe(mcp)(OTf)₂] and its analogues were investigated electrochemically under both acidic and neutral conditions. All the systems under investigation proved to be electrochemically active toward the WO reaction, with no major differences in activity despite the structural changes. Our findings show that WO-catalyzed by mcp–iron complexes proceeds via homogeneous species, whereas the analogous manganese complex forms a heterogeneous deposit on the electrode surface. Mechanistic studies show that the reaction proceeds with a different rate-determining step (rds) than what was previously proposed in the presence of chemical oxidants. Moreover, the different kinetic isotope effect (KIE) values obtained electrochemically at pH 7 (KIE ∼ 10) and at pH 1 (KIE = 1) show that the reaction conditions have a remarkable effect on the rds and on the mechanism. We suggest a proton-coupled electron transfer (PCET) as the rds under neutral conditions, whereas at pH 1 the rds is most likely an electron transfer (ET).

Mechanism and Dynamics of Formation of Bisoxo Intermediates and O-O Bond in the Catalytic Water Oxidation Process

This work elucidates the reactivity of water molecules toward the tridentate nitrogen-containing iron complex in the water oxidation process. Here, we consider the Fe^V-bisoxo complex {[Fe^V(Me₃tacn)(OH₂)(═O)₂]⁺} to be responsible for the oxygen-oxygen bond formation. This O-O bond formation happens through the addition of water as a nucleophile. The transition state was determined by the synchronous transit-guided quasi-Newton method using reactants and products and verified by intrinsic reaction coordinates (IRCs). From the IRC calculations, we observe that the Fe^V═O moiety is attacked by water and assisted by the H-bonded interaction with the oxygen atom of the bisoxo complex. The hydrogen atom is transferred to the oxygen atom of the bisoxo complex through the transition state, and subsequently, the hydroxide is transferred to another oxygen of the bisoxo complex, resulting in the formation of the oxygen-oxygen bond. This work also explains the effect of explicit water molecules on the oxygen-oxygen bond formation. Our results also show how the formation of superoxide plays an essential role in O₂ evolution. We used the potential energy scan method to compute the transition state in the oxygen evolution step. In the present work, we study the effect of chlorine on the formation of the oxygen-oxygen bond formation. In this study, the changes in the oxidation state, spin density, and spin multiplicity of the complexes are investigated for each successive step. Apart from these static theoretical calculations, we also studied the oxygen-oxygen bond formation through first-principles molecular dynamics with the aid of the well-tempered metadynamics sampling technique. From the observation of the free energy surfaces from metadynamics simulations, it is evident that the hydroxide transfer has a lesser free energetic reaction as compared to the proton transfer. This complete mechanistic study may give an idea to design a suitable water oxidation catalyst.

Cyclopentadienone–NHC iron(0) complexes as low valent electrocatalysts for water oxidation

Design and application of earth abundant iron based molecular electrocatalysts for water oxidation, an essential challenge for sustainable energy applications.

Iron-Catalyzed Oxidation of 1-Phenylethanol and Glycerol With Hydrogen Peroxide in Water Medium: Effect of the Nitrogen Ligand on Catalytic Activity and Selectivity

The iron(II) complexes [Fe(bpy)₃](OTf)₂ (bpy = 2,2'-bipyridine; OTf = CF₃SO₃) (1) and [Fe(bpydeg)₃](OTf)₂ (bpydeg = N⁴,N⁴-bis(2-(2-methoxyethoxy)ethyl) [2,2'-bipyridine]-4,4'-dicarboxamide) (2), the latter being a newly synthesized ligand, were employed as catalyst precursors for the oxidation of 1-phenylethanol with hydrogen peroxide in water, using either microwave or conventional heating. With the same oxidant and medium the oxidation of glycerol was also explored in the presence of 1 and 2, as well as of two similar iron(II) complexes bearing tridentate ligands, i.e., [Fe(terpy)₂](OTf)₂ (terpy = 2, 6-di(2-pyridyl)pyridine) (3) and [Fe(bpa)₂](OTf)₂ (bpa = bis(2-pyridinylmethyl)amine) (4): in most reactions the major product formed was formic acid, although with careful tuning of the experimental conditions significant amounts of dihydroxyacetone were obtained. Addition of heterocyclic amino acids (e.g., picolinic acid) increased the reaction yields of most catalytic reactions. The effect of such additives on the evolution of the catalyst precursors was studied by spectroscopic (NMR, UV-visible) and ESI-MS techniques.

Dicopper(ii) tetrapyridyl complexes incorporated with ancillary ligands for effective water oxidation

Water oxidation catalysis of dicopper(ii) tetrapyridyl complexes under alkaline conditions was improved by diamine ligands.

A dinuclear iron complex as an efficient electrocatalyst for homogeneous water oxidation reaction

A novel dinuclear iron complex of a Schiff base ligand has been exploited as a homogeneous water splitting electrocatalyst having possible real life application in renewable energy.

Water oxidation by Ferritin: A semi-natural electrode

Ferritin is a protein (ca. 12 nm) with a central pocket of 6 nm diameter, and hydrated iron oxide stored in this central cavity of this protein. The protein shell has a complicated structure with 24 subunits. Transmission electron microscopy images of ferritin showed nanosized iron oxides (ca. 4-6 nm) in the protein structure. In high-resolution transmission electron microscopy images of the iron core, d-spacings of 2.5-2.6 Å were observed, which is corresponded to d-spacings of ferrihydrite crystal structure. Our experiments showed that at pH 11, the modified electrode by this biomolecule is active for water oxidation (turnover frequency: 0.001 s^-1 at 1.7 V). Using affected by bacteria, we showed that Fe ions in the structure of ferritin are critical for water oxidation.

New Cyclams and Their Copper(II) and Iron(III) Complexes: Synthesis and Potential Application as Anticancer Agents

New cyclam derivatives (HOCH₂ CH₂ CH₂ )₂ (PhCH₂ )₂ Cyclam and (HOCH₂ CH₂ CH₂ )₂ ( 4 - CF 3 PhCH₂ )₂ Cyclam, as well as their Cu^II and Fe^III complexes, were synthesized and characterized and their stability in cellular media was assessed. The cytotoxic effect of all compounds was examined on human cervical cancer (HeLa) cells, revealing strong anticancer activity. After 24 h, only complexes with the (HOCH₂ CH₂ CH₂ )₂ ( 4 - CF 3 PhCH₂ )₂ Cyclam ligand are cytotoxic, whereas after incubation for 72 h all compounds show significant antiproliferative effects. Notably, compounds containing 4 - CF 3 PhCH₂ pendant arms on the cyclam ring revealed the most activity, with cytotoxicity values up to 12 times higher than those of cisplatin. All metal complexes seem to induce cell death through the formation of reactive oxygen species.

Enhanced photocatalytic activity of BiVO4 coupled with iron-based complexes for water oxidation under visible light irradiation

Four iron complexes were used as pre-catalysts in BiVO₄–NaIO₃ photocatalytic water oxidation systems. The best-performing system afforded a rather high oxygen yield and apparent quantum efficiency yield of 99.1% and 44.3%, respectively.

Catalytic Activity of an Iron-Based Water Oxidation Catalyst: Substrate Effects of Graphitic Electrodes

The synthesis, characterization, and electrochemical studies of the dinuclear complex [(MeOH)Fe(Hbbpya)-μ-O-(Hbbpya)Fe(MeOH)](OTf)₄ (1) (with Hbbpya = N,N-bis(2,2′-bipyrid-6-yl)amine) are described. With the help of online electrochemical mass spectrometry, the complex is demonstrated to be active as a water oxidation catalyst. Comparing the results obtained for different electrode materials shows a clear substrate influence of the electrode, as the complex shows a significantly lower catalytic overpotential on graphitic working electrodes in comparison to other electrode materials. Cyclic voltammetry experiments provide evidence that the structure of complex 1 undergoes reversible changes under high-potential conditions, regenerating the original structure of complex 1 upon returning to lower potentials. Results from electrochemical quartz crystal microbalance experiments rule out that catalysis proceeds via deposition of catalytically active material on the electrode surface.

Manganese complex-catalyzed oxidation and oxidative kinetic resolution of secondary alcohols by hydrogen peroxide

The highly efficient catalytic oxidation and oxidative kinetic resolution (OKR) of secondary alcohols has been achieved using a synthetic manganese catalyst with low loading and hydrogen peroxide as an environmentally benign oxidant in the presence of a small amount of sulfuric acid as an additive. The product yields were high (up to 93%) for alcohol oxidation and the enantioselectivity was excellent (>90% ee) for the OKR of secondary alcohols. Mechanistic studies revealed that alcohol oxidation occurs via hydrogen atom (H-atom) abstraction from an α-CH bond of the alcohol substrate and a two-electron process by an electrophilic Mn-oxo species. Density functional theory calculations revealed the difference in reaction energy barriers for H-atom abstraction from the α-CH bonds of R- and S-enantiomers by a chiral high-valent manganese-oxo complex, supporting the experimental result from the OKR of secondary alcohols.

Oxidation of Alkanes by Periodate Using a MnV Nitrido Complex as Catalyst

The design of catalytic systems that can selectively oxidize unactivated C-H bonds under mild conditions is a challenge to chemists. We report here that the manganese(V) nitrido complex [Mn^V (N)(CN)₄ ]^2- is a highly efficient catalyst for the oxidation of alkanes by periodate (IO₄^- ) at ambient conditions. Excellent yields of alcohols and ketones (>95 %) are obtained with a maximum turnover number (TON) of 3000.

On the mechanism of water oxidation catalyzed by a dinuclear ruthenium complex: a quantum chemical study

The development of efficient and robust catalysts for water oxidation is an essential element in solar water splitting. In the present paper, the reaction mechanism for a dinuclear Ru water oxidation catalyst has been investigated in detail through quantum chemical calculations.

Evaluation of iron-based electrocatalysts for water oxidation – an on-line mass spectrometry approach

Using on-line mass spectrometry in combination with classical electroanalytical techniques makes it possible to reliably determine onset potentials and to distinguish between competing reactions such as oxygen evolution and carbon dioxide formation.