Efficient Hg0 catalytic removal by direct S-scheme heterostructure of two-dimensional Bi2MoO6 (2 0 0)/g-C3N4 nanosheets under visible light

The gaseous elemental mercury (Hg0) emitted from coal-fired flue gas is extremely harmful to the atmospheric environment and human health. In this study, a 2D/2D Bi2MoO6(2 0 0)/g-C3N4 heterojunction photocatalyst was synthesized and exhibited a high visible-light driven Hg0 removal efficiency up to 99.5% in an atmosphere consisting of N2, O2 (6%), CO2 (12%), NO (100 ppm), SO2 (800 ppm), and H2O (5%). The introduction of surfactant CTAB led to further exposure of the highly active (2 0 0) crystal facet of Bi2MoO6, with a higher reactive oxygen species ratio than the original mainly exposed (1 3 1) crystal facet, and inhibited the agglomeration of Bi2MoO6, thereby greatly reducing the micro-thickness and improving the specific surface area. The smaller thickness effectively promoted the separation of photoinduced carriers and the speed of transfer to the interface. Additionally, through EPR characterization and work function calculation, we observed that the change in the exposed crystal facet regulated the Fermi level of Bi2MoO6 nanosheets, altering the direction of the built-in electric field at the interface with g-C3N4. This formation of an S-scheme 2D/2D Bi2MoO6(2 0 0)/g-C3N4 heterostructure further facilitated the recombination of unintentional carriers and strengthened the separation and catalysis of effective photogenerated carriers. To a certain extent, this work provides a guidance for the research of photocatalysis to achieve efficient and sustainable mercury removal from coal-fired flue gas.

Copper(II)-Incorporated Porphyrin-Based Porous Organic Polymer for a Nonenzymatic Electrochemical Glucose Sensor

To date, the fabrication of multifunctional nanoplatforms based on a porous organic polymer for electrochemical sensing of biorelevant molecules has received considerable attention in the search for a more active, robust, and sensitive electrocatalyst. Here, in this report, we have developed a new porous organic polymer based on porphyrin (TEG-POR) from a polycondensation reaction between a triethylene glycol-linked dialdehyde and pyrrole. The Cu(II) complex of the polymer Cu-TEG-POR shows high sensitivity and a low detection limit for glucose electro-oxidation in an alkaline medium. The characterization of the as-synthesized polymer was done by thermogravimetric analysis (TGA), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, and ¹³C CP-MAS solid-state NMR. The N₂ adsorption/desorption isotherm was carried out at 77 K to analyze the porous property. TEG-POR and Cu-TEG-POR both show excellent thermal stability. The Cu-TEG-POR-modified GC electrode shows a low detection limit (LOD) value of 0.9 μM and a wide linear range (0.001-1.3 mM) with a sensitivity of 415.8 μA mM^-1 cm^-2 toward electrochemical glucose sensing. The interference of the modified electrode from ascorbic acid, dopamine, NaCl, uric acid, fructose, sucrose, and cysteine was insignificant. Cu-TEG-POR exhibits acceptable recovery for blood glucose detection (97.25-104%), suggesting its scope in the future for selective and sensitive nonenzymatic glucose detection in human blood.

Advanced Photocatalysts for CO2 Conversion by Severe Plastic Deformation (SPD)

Excessive CO₂ emission from fossil fuel usage has resulted in global warming and environmental crises. To solve this problem, the photocatalytic conversion of CO₂ to CO or useful components is a new strategy that has received significant attention. The main challenge in this regard is exploring photocatalysts with high efficiency for CO₂ photoreduction. Severe plastic deformation (SPD) through the high-pressure torsion (HPT) process has been effectively used in recent years to develop novel active catalysts for CO₂ conversion. These active photocatalysts have been designed based on four main strategies: (i) oxygen vacancy and strain engineering, (ii) stabilization of high-pressure phases, (iii) synthesis of defective high-entropy oxides, and (iv) synthesis of low-bandgap high-entropy oxynitrides. These strategies can enhance the photocatalytic efficiency compared with conventional and benchmark photocatalysts by improving CO₂ adsorption, increasing light absorbance, aligning the band structure, narrowing the bandgap, accelerating the charge carrier migration, suppressing the recombination rate of electrons and holes, and providing active sites for photocatalytic reactions. This article reviews recent progress in the application of SPD to develop functional ceramics for photocatalytic CO₂ conversion.

Photocatalytic reduction of low-concentration CO2 by metal-organic frameworks

Direct conversion of diluted CO₂ to value-added chemical stocks and fuels with solar energy is an energy-saving approach to relieve global warming and realize a carbon-neutral cycle. The exploration of catalysts with both efficient CO₂ adsorption and reduction ability is significant to achieving this goal. Metal-organic frameworks (MOFs) are emerging in the field of low-concentration CO₂ reduction due to their highly tunable structure, high porosity, abundant active sites and excellent CO₂ adsorption capacity. This highlight outlines the advantages of MOFs for low-pressure CO₂ adsorption and the strategies to improve the photocatalytic performance of MOF materials at low CO₂ concentrations, including the functionalization of organic ligands, regulation of metal nodes and preparation of MOF composites or derivatives. This paper aims to provide possible avenues for the rational design and development of catalysts with the ability to reduce low-concentration CO₂ efficiently for practical applications.

Porphyrins and phthalocyanines as biomimetic tools for photocatalytic H2 production and CO2 reduction

The increasing energy demand and environmental issues caused by the over-exploitation of fossil fuels render the need for renewable, clean, and environmentally benign energy sources unquestionably urgent. The zero-emission energy carrier, H₂ is an ideal alternative to carbon-based fuels especially when it is generated photocatalytically from water. Additionally, the photocatalytic conversion of CO₂ into chemical fuels can reduce the CO₂ emissions and have a positive environmental and economic impact. Inspired by natural photosynthesis, plenty of artificial photocatalytic schemes based on porphyrinoids have been investigated. This review covers the recent advances in photocatalytic H₂ production and CO₂ reduction systems containing porphyrin or phthalocyanine derivatives. The unique properties of porphyrinoids enable their utilization both as chromophores and as catalysts. The homogeneous photocatalytic systems are initially described, presenting the various approaches for the improvement of photosensitizing activity and the enhancement of catalytic performance at the molecular level. On the other hand, for the development of the heterogeneous systems, numerous methods were employed such as self-assembled supramolecular porphyrinoid nanostructures, construction of organic frameworks, combination with 2D materials and adsorption onto semiconductors. The dye sensitization on semiconductors opened the way for molecular-based dye-sensitized photoelectrochemical cells (DSPECs) devices based on porphyrins and phthalocyanines. The research in photocatalytic systems as discussed herein remains challenging since there are still many limitations making them unfeasible to be used at a large scale application before finding a large-scale application.

Visible light responsive metalloporphyrin-sensitized TiO2 nanotube arrays for artificial photosynthesis of methane

A photocatalyst composed of TiO2 nanotube arrays and a porphyrin (metalloporphyrin) was prepared. The improved photocatalytic performance for CO2 reduction is ascribed to the enhanced charge separation and light absorbance.

Efficient CO2 reduction over a Ru-pincer complex/TiO2 hybrid photocatalyst via direct Z-scheme mechanism

Solar-driven CO2 conversion to hydrocarbon fuels is a feasible way to solve the increasingly serious energy problem and greenhouse effect. Herein, we fabricate a novel hybrid photocatalyst for CO2 reduction...

Metalloporphyrin-Decorated Titanium Dioxide Nanosheets for Efficient Photocatalytic Carbon Dioxide Reduction

In photocatalysis, the most efficient way to separate photogenerated electron-hole pairs has been extensively studied. However, the methods to increase the quantities of free electrons are neglected. Herein, we used a self-assembly method to fabricate MTCPP/TiO₂ composite materials with a series of metalloporphyrins (MTCPPs, M = Fe, Co, Zn) as sensitizers to modify TiO₂ nanosheets. First, abundant carboxyl and hydroxyl on porphyrin were adsorbed by metal ions. Then, the remaining carboxyl and hydroxyl on porphyrin were anchored on the surface of TiO₂ nanosheets. Finally, MTCPP/TiO₂ was obtained by a layer-by-layer self-assembly process. MTCPP broadens the light response of TiO₂ from ultraviolet light to visible light and enhances the CO₂ adsorption ability. Moreover, metal ions coordinating with porphyrin regulate the electron density of the porphyrin ring and provide a stronger π feedback bond, which promote charge separation. Consequently, by optimizing the type of metal ion, the yield of ZnTCPP/TiO₂ composites reached 109.33 μmol/(g h) of CO and 9.94 μmol/(g h) of CH₄, which was more than 50 times that of pure TiO₂. This study proposes a possible visible-light-induced CO₂ reduction mechanism of metal-ion-based photocatalysis, which provides great insights into optimizing the designation of efficient photocatalysis.

Intercalation of laminar Cu-Al LDHs with molecular TCPP(M) (M = Zn, Co, Ni, and Fe) towards high-performance CO2 hydrogenation catalysts

A confined space is broadly applied to enhance the dispersion and limit the aggregation of catalytically active sites, especially at high temperatures. In this work, we provided an efficient approach to immobilize transition metal ions (e.g., Zn2+, Co2+, Ni2+, and Fe2+) into the confined space of laminar Cu-Al layered double hydroxides (LDHs) using a range of molecular metalloporphyrins (viz., TCPP(M)) as shuttles. The deprotonated TCPP(M) not only provides nitrogen-based coordination sites to anchor a series of transition metal ions, but also intercalates and diffuses facilely into the interlayer gallery of LDHs by ion exchange. The obtained TCPP(M)@Cu-Al LDHs were then used as solid precursors for the fabrication of a series of heterogeneous catalysts for CO2 hydrogenation via high-temperature calcination. Two restriction forces contributed to the enhanced dispersion of the active species over the catalyst surface structures. Remarkably, the transition metals positioned within the confined space of LDHs significantly affected the catalytic performance of CO2 hydrogenation. Mainly CO, methanol, and methane were found as the C1 products, and their selectivities are highly dependent on the reaction intermediates, as suggested by the in situ DRIFTS study. Moreover, the designed catalysts fabricated via molecular TCPP(M) intercalation exhibited much better performance than the conventional catalysts derived from surface-supported CA-LDHs, due to their better metal dispersion and smaller particle size.

Efficient photocatalysts of a tetraphenylporphyrin/P25 hybrid for visible-light photoreduction of CO2

A highly efficient TPP/P25 hybrid for the photoreduction of CO₂ was developed and prepared via weak interactions between TPP and P25. The optimized TPP/P25 hybrid shows excellent activity for CO₂ reduction. TPP loading has an important influence on the CO₂ reduction performance.

Asymmetric zinc porphyrin derivatives bearing three pseudo-pyrimidine meso-position substituents and their photosensitization for H2 evolution

ZnPy-6 has lower steric hindrance than ZnPy-5 when the N atoms of the pseudo-pyrimidines combine with g-C₃N₄ and AA, and thus it exhibits better photosensitization.

TiO2 modified with a Ru(ii)–N′NN′ 8-hydroxyquinolyl complex for efficient gaseous photoreduction of CO2

A rare example of a Ru(ii) pincer complex for the efficient photoreduction of CO₂ to CO/CH₄ in a gaseous system was developed.

Greatly enhanced H2S sensitivity using defect-rich titanium oxide films

Defect-rich titanium oxide films revealed overlayers of chemi-sorbed oxygen, producing a significant enhancement in sensitivity towards H₂S gas with greater stability, better selectivity and quicker recovery.