Protocol for the preparation of amorphous manganese oxide and its application as heterogeneous catalyst in the direct synthesis of amides and nitriles

The cleavage and functionalization of carbon-carbon (C–C) bonds has emerged as a powerful tool for preparing value-added chemicals. In this protocol, we describe the preparation of amorphous manganese oxide and its application as a heterogeneous catalyst in the direct synthesis of amides via successive cleavage and amidation of C–C bonds in alcohols. Furthermore, we describe how a slight modification of reaction conditions allows for the cleavage and cyanation of alcohols to access sterically hindered nitriles.

For complete details on the use and execution of this protocol, please refer to He et al. (2022).

•

Heterogeneous MnO_x-catalyzed cleavage and amidation/cyanation of alcohols

•

Convenient preparation of MnO_x in large scale

•

Recycling and reusing of MnO_x

•

Wide substrate scope and gram-scale synthesis allowable

Publisher’s note: Undertaking any experimental protocol requires adherence to local institutional guidelines for laboratory safety and ethics.

Mild and Efficient Heterogeneous Hydrogenation of Nitroarenes Facilitated by a Pyrolytically Activated Dinuclear Ni(II)-Ce(III) Diimine Complex

We communicate the assembly of a solid, Ce-promoted Ni-based composite that was applied as catalyst for the hydrogenation of nitroarenes to afford the corresponding organic amines. The catalytically active material described herein was obtained through pyrolysis of a SiO₂-pellet-supported bimetallic Ni-Ce complex that was readily synthesized prior to use from a MeO-functionalized salen congener, Ni(OAc)₂·4 H₂O, and Ce(NO₃)₃·6 H₂O. Rewardingly, the requisite ligand for the pertinent solution phase precursor was accessible upon straightforward and time-saving imine condensation of ortho-vanillin with 1,3-diamino-2,2′-dimethylpropane. The introduced catalytic protocol is operationally simple in that the whole reaction set-up is quickly put together on the bench without the need of cumbersome handling in a glovebox or related containment systems. Moreover, the advantageous geometry and compact-sized nature of the used pellets renders the catalyst separation and recycling exceptionally easy.

Generation of Cobalt-Containing Nanoparticles on Carbon via Pyrolysis of a Cobalt Corrole and Its Application in the Hydrogenation of Nitroarenes

We report on the manufacture of a state-of-the-art heterogeneous non-noble metal catalyst, which is based on a molecularly well-defined phosphine-tagged cobalt corrole complex. This precursor compound is readily synthesized from convenient starting materials while the active material is obtained through wet-impregnation of the pertinent metalliferous macrocycle onto carbon black followed by controlled pyrolysis of the loaded carrier material under an inert gas atmosphere. Thus, the obtained composite was then applied in the heterogeneous hydrogenation of various nitroarenes to yield a vast array of valuable aniline derivatives that were conveniently isolated as their hydrochloride salts. The introduced catalytic protocol is robust and user-friendly with the entire assembly of the reaction set-up enabling the conduction of the experiments on the laboratory bench without any protection from air.

Ru(III) -based polyoxometalate tetramers as highly efficient heterogeneous catalysts for alcohol oxidation reactions at room temperature

A novel ruthenium-containing polyoxometalate-based organic-inorganic hybrid, K₄Na₉H_7.4[(AsW₉O₃₃)₄(WO₂)₄{Ru_3.2(C₃H₃N₂)₂}]·42H₂O (1), was successfully synthesized by a one-step hydrothermal method under acidic conditions, which applied a self-assembly strategy between inorganic polyoxometalate based on trivacant [B-α-AsW₉O₃₃]^9- {AsW₉} fragments and an organic ligand, imidazole (C₃H₄N₂). Compound 1 was further characterized by single-crystal X-ray diffraction, PXRD, IR spectroscopy, UV-Vis spectroscopy, ESI-MS, elemental analysis and TGA. Single-crystal X-ray diffraction data reveal that the polyanion consists of four trivacant Keggin-type polyanion {AsW₉} building blocks bridged by four {WO₆} units, leading to a crown-shaped tetrameric structure [(AsW₉O₃₃)₄(WO₂)₄{Ru_3.2(C₃H₃N₂)₂}]^20.4-. The ESI-MS result reveals that the polyanion unit has excellent structural integrity in water. Moreover, the catalysis study of 1 was also further investigated, and the experimental results indicate heterogeneous catalyst 1 presents high efficiency (yield = 98%), excellent selectivity (>99%), and good recyclability for the oxidation of 1-(4-chlorophenyl)ethanol to 4'-chloroacetophenone with commercially available 70% aqueous tert-butyl hydroperoxide {TBHP (aq.)} as the oxidant at room temperature.

C70 Fullerene Catalyzed Photoinduced Aerobic Oxidation of Benzylamines to Imines and Aldehydes

C₇₀ fullerene catalyzed photoinduced oxidation of benzylic amines at ambient conditions has been explored here. The developed strategy's main feature includes the additive/oxidant-free conversion of benzylic amine to corresponding imine and aldehydes. The reaction manifests broad substrate scope with excellent function group leniency and is applicable up to the gram scale. Further, symmetrical secondary amines can also be synthesized from benzylic amine in a one-pot two-step process. Various experiments and density functional theory studies revealed that the current reaction involves the generation of reactive oxygen species, single electron transfer reaction, and benzyl radical formation as key steps under photocatalytic conditions.

Cobalt Nanoparticles-Catalyzed Widely Applicable Successive C-C Bond Cleavage in Alcohols to Access Esters

Selective cleavage and functionalization of C-C bonds have important applications in organic synthesis and biomass utilization. However, functionalization of C-C bonds by controlled cleavage remains difficult and challenging because they are inert. Herein, we describe an unprecedented efficient protocol for the breaking of successive C-C bonds in alcohols to form esters with one or multiple carbon atoms less using heterogeneous cobalt nanoparticles as catalyst with dioxygen as the oxidant. A wide range of alcohols including inactive long-chain alkyl aryl alcohols undergo smoothly successive cleavage of adjacent -(C-C)_n - bonds to afford the corresponding esters. The catalyst was used for seven times without any decrease in activity. Characterization and control experiments disclose that cobalt nanoparticles are responsible for the successive cleavage of C-C bonds to achieve excellent catalytic activity, while the presence of Co-N_x has just the opposite effect. Preliminary mechanistic studies reveal that a tandem sequence reaction is involved in this process.

Trinuclear ruthenium core-containing polyoxometalate-based hybrids: preparation, characterization and catalytic behavior

Two ruthenium-containing polyoxometalate-based hybrids (Ru-POMs), KH8[Ru3O(Trz)6Cl3]2[(NaO6)W6(H2O)6(AsW9O33)4]·28H2O (1) and H3[Ru3O(Trz)6Cl3]2[(WO)2W(OH)(AsW9O33)2]·6H2O (2), (Trz = 1,2,4-triazole), were successfully isolated by a one-step hydrothermal method under different acidic conditions and further characterized by single-crystal X-ray diffraction, powder X-ray diffraction (PXRD), IR spectroscopy, electrospray ionization and mass spectrometry (ESI-MS), thermogravimetric (TG) analyses and elemental analyses. Single-crystal X-ray diffraction analyses reveal two polyanions comprised of four/two identical trivacant Keggin-type polyanion building blocks, leading to the formation of tetrameric/dimeric assembly stabilized by additional metal-oxo cores, respectively. ESI-MS shows that the polyanion units [(NaO6)W6(H2O)6(AsW9O33)4]11- and [(WO)2W(OH)(AsW9O33)2]5- are intact in mixed solvent. Moreover, the two heterogeneous catalysts with trinuclear ruthenium cations were further investigated, and 1 was found to exhibit much higher yield (94.1%)/conversion (95.1%) and better selectivity (>99%) towards the oxidation of thioanisole to sulfoxide than 2.

Synthesis, structure and catalytic activity of manganese(ii) complexes derived from bis(imidazole)methane-based ligands

New mononuclear manganese(ii) complexes [Mn(κ2-L1)(OAc)2] ([Mn]-1), [Mn(κ2-L2)(OAc)2] ([Mn]-2) and [Mn(κ2-L3)(OAc)2] ([Mn]-3) with imidazole based ligands {4,4'-(phenylmethylene)bis(2-ethyl-5-methyl-1H-imidazole)} (L1), {(4,4'-((2-methoxy phenyl)methylene)bis(2-ethyl-5-methyl-1H-imidazole)} (L2) and {4,4'-((2-chlorophenyl) methylene)bis(2-ethyl-5-methyl-1H-imidazole)} (L3) are synthesized and fully characterized by a variety of techniques. Furthermore, the molecular structures of complexes [Mn]-1 and [Mn]-2 are established by single crystal X-ray structure analysis. The synthesized manganese(ii) complexes exhibited efficient catalytic oxidative coupling of primary amines in air under solvent-free conditions to the corresponding imines in moderate to good yields.

Isopropanol as a hydrogen source for single atom cobalt-catalyzed Wacker-type oxidation

The first example of Wacker-type oxidation catalyzed by a single atom cobalt catalyst under dioxygen using isopropanol as the hydrogen source was established.

Bifunctional Graphene-Based Metal-Free Catalysts for Oxidative Coupling of Amines

Graphene oxide (GO), an emerging material ornamented with oxygen-containing functional groups, is becoming a promising alternative for various applications. The piranha solution treatment of GO can increase oxygen-containing functional groups and result in improved graphene oxide (IGO), as well as restore the functional groups lost because of the reaction. It is found that GO can oxidize the amine to the corresponding imine in the absence of oxygen and a catalyst, and the obtained IGO even shows higher activity. In addition, the piranha solution can partially restore the reactivity of GO after the reaction. The different roles of oxygen-containing functional groups in the oxidative coupling reaction are investigated. A possible reaction mechanism for the oxidation of benzylamine to N-benzylidene benzylamine is also proposed.

Synthesis of a molecularly defined single-active site heterogeneous catalyst for selective oxidation of N-heterocycles

Generally, a homogeneous catalyst exhibits good activity and defined active sites but it is difficult to recycle. Meanwhile, a heterogeneous catalyst can easily be reused but its active site is difficult to reveal. It is interesting to bridge the gap between homogeneous and heterogeneous catalysis via controllable construction of a heterogeneous catalyst containing defined active sites. Here, we report that a molecularly defined, single-active site heterogeneous catalyst has been designed and prepared via the oxidative polymerization of maleimide derivatives. These polymaleimide derivatives can be active catalysts for the selective oxidation of heterocyclic compounds to quinoline and indole via the recycling of -C=O and -C-OH groups, which was confirmed by tracing the reaction with GC-MS using maleimide as the catalyst and by FT-IR analysis with polymaleimide as the catalyst. These results might promote the development of heterogeneous catalysts with molecularly defined single active sites exhibiting a comparable activity to homogeneous catalysts.

Synthesis of N-Doped Mesoporous Carbon Nanorods through Nano-Confined Reaction: High-Performance Catalyst Support for Hydrogenation of Phenol Derivatives

Traditional hard-template methods for the preparation of mesoporous carbon structures have been well developed, but there are difficulties associated with complete filling of the organic precursors in ordered mesochannels and exact replication of the templates. Herein, mesoporous carbon nanorods (meso-CNRs) were synthesized through thermal condensation of furfuryl alcohol followed by the nano-confined decomposition of polyfurfuryl alcohol in silica nanotubes (SiO₂ NTs) with porous shells. Limited and slow release of gaseous water through the porous shells and finite polyfurfuryl precursor inside silica nanotubes are responsible for the formation of the mesoporous structures. Nitrogen can be doped into the meso-CNRs by adding guanidine hydrochloride to the precursors. The nitrogen dopant not only stabilizes the ultrasmall and active Pd nanocatalyst in the meso-CNRs but also increases the electron density of Pd and accelerates the dissociation of H₂ , both of which increase the catalytic activity of the Pd catalyst in hydrogenation reactions.

Cultivation of a Cu/HMPC catalyst from a hyperaccumulating mustard plant for highly efficient and selective coupling reactions under mild conditions

Cu-containing activated carbon (eco-catalyst, Cu/HMPC, where ‘C’ defines ‘carbon’) was derived from a metal-hyperaccumulating mustard plant (HMP) by a simple chemical activation method. Transmission electron microscopy/selected area diffraction (HRTEM/SAED) results revealed that the Cu/HMPC has mainly three types of morphology [sheet-like morphology (2D), hollow-spheres (3D) and needle-like structures (1D)] which are interconnected. HRTEM-SAED, Raman and X-ray photoelectron spectroscopy (XPS) results confirmed the existence of Cu oxide species in Cu/HMPC. Content of Cu in Cu/HMPC was determined to be 1.03 wt%. The quality of graphitization in Cu/HMPC was discussed by using Raman and XRD results. The BET surface area of Cu/HMPC was determined to be 620.8 m² g⁻¹. The Cu/HMPC actively transformed a wide range of amines to imines under very mild reaction conditions. The catalyst Cu/HMPC gave products in excellent yields (98–61%) with very high TON/TOF values (1512/339–833/35 h⁻¹). To the best of our knowledge, this is the most efficient Cu-based heterogeneous eco-catalyst for the synthesis of imines among those reported to date. The Cu can be recovered from used Cu/HMPC by a simple HCl treatment. Versatility, heterogeneity and reusability of Cu/HMPC were tested. A possible mechanism has been proposed.

Cu/HMPC eco-catalyst with unique interconnected 1D/2D/3D morphology was derived from metal-hyperaccumulating mustard plant for highly efficient and selective coupling reactions.

Direct access toN-alkylated amines and iminesviaacceptorless dehydrogenative coupling catalyzed by a cobalt(ii)-NNN pincer complex

A Co(ii)-NNN pincer complex catalyzed directN-alkylation of anilines with alcoholsviahydrogen auto-transfer and selective acceptorless dehydrogenative coupling of benzylamines with alcohols affording imines with the liberation of molecular hydrogen and water is reported.

Enhanced visible light photocatalytic non-oxygen coupling of amines to imines integrated with hydrogen production over Ni/CdS nanoparticles

Non-oxygen coupling of amines to imines, initiated by hydrogen evolution over Ni/CdS nanoparticles with visible light, smoothly happens. Outstanding catalytic performance was achieved, originating from integrating effect of coupling reaction and solar-driven reduction of aqueous protons.

Synthesis of cobalt nanoparticles by pyrolysis of vitamin B12: a non-noble-metal catalyst for efficient hydrogenation of nitriles

A facile preparation of vitamin B₁₂-derived carbonaceous cobalt particles supported on ceria is reported.

Synthesis, characterization and Pd(ii)-coordination chemistry of the ligand tris(quinolin-8-yl)phosphite. Application in the catalytic aerobic oxidation of amines

The ligand P(Oquin)₃ is reported and was coordinated to Pd(ii). This complex is a catalyst precursor for the homocoupling of amines.

Preparation of ordered N-doped mesoporous carbon materials via a polymer–ionic liquid assembly

A facile and efficient method for the synthesis of carbon materials with uniform channels and a high-nitrogen-content coating layer was successfully developed through a polymer–ionic liquid assembly strategy.