Shedding light on an ultra-bright photoluminescent lamellar gold thiolate coordination polymer [Au(p-SPhCO2Me)]n

Inducing Platinophilic Interactions in [Pt(SCN)4]2- Salts by Cation Tuning

A series of simple [Pt(SCN)4]2- salts with a variety of cations was synthesized and characterized using X-ray crystallography to determine factors that could induce platinophilic interactions between [Pt(SCN)4]2- anions, including cation size and shape, charge, and ability to participate in hydrogen bonding. The salts [N(PPh3)2]2[Pt(SCN)4], [AsPh4]2[Pt(SCN)4], and [Co(1,10-phenanthroline)3][Pt(SCN)4] feature bulky, noncoordinating cations where the [Pt(SCN)4]2- anions are completely separated from each other, with no Pt-Pt interactions present. Salts containing the hydrogen-bonding cations [Co(NH3)6]2[Pt(SCN)4]3 and [Co(en)3]2[Pt(SCN)4]3 (en = 1,2-ethylenediamine) display close Pt-Pt distances, with both compounds exhibiting platinophilic interactions with distances of 3.373(2) and 3.539(8) Å, respectively, the first reported platinophilic interactions with the [Pt(SCN)4]2- unit. [Co(en)3]2[Pt(SCN)4]3 also presents intermolecular chalcogen S···S and Pt···S interactions, resulting in increased dimensionality while also assisting in assembling the platinophilic interaction. The compounds are emissive at 77 K in the solid state, exhibiting a d-d metal-centered transition regardless of whether or not any platinophilic interactions are present. Overall, hydrogen-bonding cations are most likely to promote close proximity of the Pt(II) metal centers and induce the formation of platinophilic interactions in [Pt(SCN)4]2-.

Vesicles, fibres, films and crystals: A low-molecular-weight-gelator [Au(6-thioguanosine)2]Cl which exhibits a co-operative anion-induced transition from vesicles to a fibrous metallo-hydrogel

We describe a simple coordination compound of Au(I) and 6-thioguanosine, [Au(6-tGH)2]Cl, that has a rich self-assembly chemistry. In aqueous solution, the discrete complex assembles into a supramolecular fibre and forms a luminescent hydrogel at concentrations above about 1 mM. Below this concentration, the macromolecular structure is a vesicle. Through appropriate control of the solvent polarity, the gel can be turned into a lamellar film or crystallised. The molecular structure of [Au(6-tGH)2]Cl was determined using single crystal X-ray diffraction, which showed bis-6-thioguanosine linearly coordinated through the thione moiety to a central Au(I) ion. In the vesicles, the photoluminescence spectrum shows a broad, weak band at 550 nm owing to aurophilic interactions. Co-operative self-assembly from vesicle to fibre is made possible through halogen hydrogen bonding interactions and the aurophilic interactions are lost, resulting in a strong photoluminescence band at 490 nm with vibronic structure typical of an intraligand transition. The vesicle-fibre transition is also revealed by a large increase of ellipticity in the circular dichroism spectrum with a prominent peak near 390 nm owing to the helical structure of the fibres. Atomic force microscopy shows that at the same time as fibres form, the sample gels. Imaging near the vesicle-fibre transition shows that the fibres form between vesicles and a mechanism for the transition based on vesicle collisions is proposed.

XFEL Microcrystallography of Self-Assembling Silver n-Alkanethiolates

New synthetic hybrid materials and their increasing complexity have placed growing demands on crystal growth for single-crystal X-ray diffraction analysis. Unfortunately, not all chemical systems are conducive to the isolation of single crystals for traditional characterization. Here, small-molecule serial femtosecond crystallography (smSFX) at atomic resolution (0.833 Å) is employed to characterize microcrystalline silver n-alkanethiolates with various alkyl chain lengths at X-ray free electron laser facilities, resolving long-standing controversies regarding the atomic connectivity and odd-even effects of layer stacking. smSFX provides high-quality crystal structures directly from the powder of the true unknowns, a capability that is particularly useful for systems having notoriously small or defective crystals. We present crystal structures of silver n-butanethiolate (C4), silver n-hexanethiolate (C6), and silver n-nonanethiolate (C9). We show that an odd-even effect originates from the orientation of the terminal methyl group and its role in packing efficiency. We also propose a secondary odd-even effect involving multiple mosaic blocks in the crystals containing even-numbered chains, identified by selected-area electron diffraction measurements. We conclude with a discussion of the merits of the synthetic preparation for the preparation of microdiffraction specimens and compare the long-range order in these crystals to that of self-assembled monolayers.

The first solid-state route to luminescent Au(I)-glutathionate and its pH-controlled transformation into ultrasmall oligomeric Au10-12(SG)10-12 nanoclusters for application in cancer radiotheraphy

There is still a need for synthetic approaches that are much faster, easier to scale up, more robust and efficient for generating gold(I)-thiolates that can be easily converted into gold-thiolate nanoclusters. Mechanochemical methods can offer significantly reduced reaction times, increased yields and straightforward recovery of the product, compared to the solution-based reactions. For the first time, a new simple, rapid and efficient mechanochemical redox method in a ball-mill was developed to produce the highly luminescent, pH-responsive Au(I)-glutathionate, [Au(SG)]n. The efficient productivity of the mechanochemical redox reaction afforded orange luminescent [Au(SG)]n in isolable amounts (mg scale), usually not achieved by more conventional methods in solution. Then, ultrasmall oligomeric Au10-12(SG)10-12 nanoclusters were prepared by pH-triggered dissociation of [Au(SG)]n. The pH-stimulated dissociation of the Au(I)-glutathionate complex provides a time-efficient synthesis of oligomeric Au10-12(SG)10-12 nanoclusters, it avoids high-temperature heating or the addition of harmful reducing agent (e.g., carbon monoxide). Therefore, we present herein a new and eco-friendly methodology to access oligomeric glutathione-based gold nanoclusters, already finding applications in biomedical field as efficient radiosensitizers in cancer radiotherapy.

Structural water molecules dominated p band intermediate states as a unified model for the origin on the photoluminescence emission of noble metal nanoclusters: from monolayer protected clusters to cage confined nanoclusters

In the past several decades, noble metal nanoclusters (NMNCs) have been developed as an emerging class of luminescent materials due to their superior photo-stability and biocompatibility, but their luminous quantum yield is relatively low and the physical origin of the bright photoluminescence (PL) of NMNCs remain elusive, which limited their practical application. As the well-defined structure and composition of NMNCs have been determined, in this mini-review, the effect of each component (metal core, ligand shell and interfacial water) on their PL properties and corresponded working mechanism were comprehensively introduced, and a model that structural water molecules dominated p band intermediate state was proposed to give a unified understanding on the PL mechanism of NMNCs and a further perspective to the future developments of NMNCs by revisiting the development of our studies on the PL mechanism of NMNCs in the past decade.

1D Hybrid Semiconductor Silver 2,6-Difluorophenylselenolate

Organic-inorganic hybrid materials present new opportunities for creating low-dimensional structures with unique light-matter interaction. In this work, we report a chemically robust yellow emissive one-dimensional (1D) semiconductor, silver 2,6-difluorophenylselenolate─AgSePhF₂(2,6), a new member of the broader class of hybrid low-dimensional semiconductors, metal-organic chalcogenolates. While silver phenylselenolate (AgSePh) crystallizes as a two-dimensional (2D) van der Waals semiconductor, introduction of fluorine atoms at the (2,6) position of the phenyl ring induces a structural transition from 2D sheets to 1D chains. Density functional theory calculations reveal that AgSePhF₂ (2,6) has strongly dispersive conduction and valence bands along the 1D crystal axis. Visible photoluminescence centered around λ_p ≈ 570 nm at room temperature exhibits both prompt (110 ps) and delayed (36 ns) components. The absorption spectrum exhibits excitonic resonances characteristic of low-dimensional hybrid semiconductors, with an exciton binding energy of approximately 170 meV as determined by temperature-dependent photoluminescence. The discovery of an emissive 1D silver organoselenolate highlights the structural and compositional richness of the chalcogenolate material family and provides new insights for molecular engineering of low-dimensional hybrid organic-inorganic semiconductors.

Light Emission in 2D Silver Phenylchalcogenolates

Silver phenylselenolate (AgSePh, also known as "mithrene") and silver phenyltellurolate (AgTePh, also known as "tethrene") are two-dimensional (2D) van der Waals semiconductors belonging to an emerging class of hybrid organic-inorganic materials called metal-organic chalcogenolates. Despite having the same crystal structure, AgSePh and AgTePh exhibit a strikingly different excitonic behavior. Whereas AgSePh exhibits narrow, fast luminescence with a minimal Stokes shift, AgTePh exhibits comparatively slow luminescence that is significantly broadened and red-shifted from its absorption minimum. Using time-resolved and temperature-dependent absorption and emission microspectroscopy, combined with subgap photoexcitation studies, we show that exciton dynamics in AgTePh films are dominated by an intrinsic self-trapping behavior, whereas dynamics in AgSePh films are dominated by the interaction of band-edge excitons with a finite number of extrinsic defect/trap states. Density functional theory calculations reveal that AgSePh has simple parabolic band edges with a direct gap at Γ, whereas AgTePh has a saddle point at Γ with a horizontal splitting along the Γ-N₁ direction. The correlation between the unique band structure of AgTePh and exciton self-trapping behavior is unclear, prompting further exploration of excitonic phenomena in this emerging class of hybrid 2D semiconductors.

Layered Organic Metal Chalcogenides (OMCs): From Bulk to Two-Dimensional Materials

The modification of inorganic two-dimensional (2D) materials with organic functional motifs is in high demand for the optimization of their properties, but it is still a daunting challenge. Organic metal chalcogenides (OMCs) are a type of newly emerging 2D materials, with metal chalcogenide layers covalently anchored by long-range ordered organic functional motifs, these materials are extremely desirable but impossible to realize by traditional methods. Both the inorganic layer and organic functional motifs of OMCs are highly designable and thus provide this type of 2D materials with enormous variety in terms of their structure and properties. This Minireview aims to review the latest developments in OMCs and their bulk precursors. Firstly, the structure types of the bulk precursors for OMCs are introduced. Second, the synthesis and applications of OMC 2D materials in photoelectricity, catalysis, sensors, and energy transfer are explored. Finally, the challenges and perspectives for future research on OMCs are discussed.

Fluorescence sensing of nitrophenol explosives using a two-dimensional organic-metal chalcogenide fully covered with functional groups

A new 2D fluorescent organic-metal chalcogenide (OMC), CdClHT (HT = 4-hydroxythiophenol), evenly covered with phenol groups is reported. CdClHT represents unparalleled selectivity and the highest sensitivity towards 2,4,6-trinitrophenol (TNP) (K_SV = 2.16 × 10⁷ m^-1, experimental LOD = 2 nM), among all reported 2D conjugated polymer (CP) luminescent detectors.

Wide-Range and Highly Sensitive Chiral Sensing by Discrete 2D Chirality Transfer on Confined Surfaces of Au(I)-Thiolate Nanosheets

Circular dichroism (CD) chiral sensing is very promising to meet the ever-increasing demands for high-throughput chiral analysis in asymmetric synthesis. However, it is still very challenging to sensitively quantify the composition of enantiomers in a wide concentration range because the existing sensing systems show either linear CD response resultant from stoichiometric chiral transfer or nonlinear CD response resultant from amplified chiral transfer and thus have the drawbacks of low sensitivity and narrow quantification range, respectively. Herein, we propose a sensing system of two-dimensional (2D) Au(I)-thiolate nanosheets. The disordered interligand interactions on the confined surfaces of nanosheets enable the formation of discrete amplified chiral domains around the adsorbed chiral analytes, resulting in a linearly amplified chiral transfer behavior, which provides a solution for highly sensitive and wide-range quantification of enantiomer compositions. Taking (1R, 2R)-(-)- and (1S, 2S)-(+)-1,2-diamino cyclohexanes as example analytes, the concentration and full-range enantiomeric excess (ee) values have been quickly determined by adsorbing them on the surface of Au(I)-MPA (MPA: 3-mercaptopropionic acid) nanosheets in the concentration range of 1.0 × 10^-6 to 4.0 × 10^-5 M. By engineering the surface functional groups, Au(I)-thiolate nanosheets can be extended to sense other types of analytes, and several polyols with multiple chiral centers have been sensed by boronic acid functionalized nanosheets at the 10^-7 M level. The high performances, good extendibility, and one-pot high-yield aqueous synthesis ensure these Au(I)-thiolate nanosheets can be developed as a practical and powerful chiral sensing platform.

Size and Quality Enhancement of 2D Semiconducting Metal-Organic Chalcogenolates by Amine Addition

The use of two-dimensional (2D) materials in next-generation technologies is often limited by small lateral size and/or crystal defects. Here, we introduce a simple chemical strategy to improve the size and overall quality of 2D metal-organic chalcogenolates (MOCs), a new class of hybrid organic-inorganic 2D semiconductors that can exhibit in-plane anisotropy and blue luminescence. By inducing the formation of silver-amine complexes during a solution growth method, we increase the average size of silver phenylselenolate (AgSePh) microcrystals from <5 μm to >1 mm, while simultaneously extending the photoluminescence lifetime and suppressing mid-gap emission. Mechanistic studies using ⁷⁷Se NMR suggest dual roles for the amine in promoting the formation of a key reactive intermediate and slowing down the final conversion to AgSePh. Finally, we show that amine addition is generalizable to the synthesis of other 2D MOCs, as demonstrated by the growth of single crystals of silver 4-methylphenylselenolate (AgSePhMe), a novel member of the 2D MOC family.

Investigation of Nucleation and Growth at a Liquid-Liquid Interface by Solvent Exchange and Synchrotron Small-Angle X-Ray Scattering

Hybrid nanomaterials possess complex architectures that are driven by a self-assembly process between an inorganic element and an organic ligand. The properties of these materials can often be tuned by organic ligand variation, or by swapping the inorganic element. This enables the flexible fabrication of tailored hybrid materials with a rich variety of properties for technological applications. Liquid-liquid interfaces are useful for synthesizing these compounds as precursors can be segregated and allowed to interact only at the interface. Although procedurally straightforward, this is a complex reaction in an environment that is not easy to probe. Here, we explore the interfacial crystallization of mithrene, a supramolecular multi-quantum well. This material sandwiches a well-defined silver-chalcogenide layer between layers of organic ligands. Controlling mithrene crystal size and morphology to be useful for applications requires understanding details of its crystal growth, but the specific mechanism for this reaction remain only lightly investigated. We performed a study of mithrene crystallization at an oil-water interfaces to elucidate how the interfacial free energy affects nucleation and growth. We exchanged the oil solvent on the basis of solvent viscosity and surface tension, modifying the dynamic contact angle and interfacial free energy. We isolated and characterized the reaction byproducts via scanning electron microscopy (SEM). We also developed a high-throughput small angle X-ray scattering (SAXS) technique to measure crystallization at short reaction timescales (minutes). Our results showed that modifying interfacial surface energy affects both the reaction kinetics and product size homogeneity and yield. Our SAXS measurements reveal the onset of crystallinity after only 15 min. These results provide a template for exploring directed synthesis of complex materials via experimental methods.

A new strategy to construct gold nanocluster-based optical probes using luminescence resonance energy transfer

Monolayer-protected metal nanoclusters (MPCs) are emerging as intriguing luminescent materials, but the construction of MPC-based optical probes is still scarce because of both the limited photoluminescence efficiency of MPCs and the lack of recognition mechanism. We herein propose a luminescence resonance energy transfer-based strategy to circumvent these problems.

Common Motif at the Red Luminophore in Bovine Serum Albumin-, Ovalbumin-, Trypsin-, and Insulin-Gold Complexes

We examined the static and dynamic characters of the red luminescence in the protein-Au(III) compounds, directly comparing multiple proteins: BSA, OVA, trypsin, and insulin. These four protein-Au(III) complexes showed a nearly identical excitation-emission pattern, not only the wavelength of luminescence (λ_em ∼ 640 nm). Lifetimes of the red luminescence shared a common value of ∼300 ns. Kinetics of the luminophore formation was consistently described by a Langmuir-type chemisorption of Au(III) for these proteins, coinciding with the protein conformation change at pH ∼ 10. These observations and the protein structural analyses support that the red luminophore formation involves Au(III) coordination to a common motif within these proteins.

Molecular gold strings: aurophilicity, luminescence and structure-property correlations

This review covers the compound class of one-dimensional gold strings. These compounds feature a formally infinite repetition of gold complexes as monomers/repeating units that are held together by aurophilic interactions, i.e. direct gold-gold contacts. Their molecular structures are primarily determined in the solid state using single crystal X-ray diffraction. The chemical composition of the employed gold complexes is diverse and furthermore plays a key role in terms of structure characteristics and the resulting properties. One of the most common features of gold strings is their photoluminescence upon UV excitation. The emission energy is often dependent on the distance of adjacent gold ions and the electronic structure of the whole string. In terms of gold strings, these parameters can be fine-tuned by external stimuli such as solvent, pH value, pressure or mechanical stress. This leads to direct structure-property correlations, not only with regard to the photophysical properties, but also electric conductivity for potential application in nanoelectronics. Concerning these correlations, gold strings, consisting of self-assembled individual complexes as building blocks, are the ideal compound class to look at, as perturbations by an inhomogeneity in the ligand sphere (such as the end of a molecule) can be neglected. Therefore, the aim of this review is to shed light on the past achievements and current developments in this area.

Isomerization-induced enhancement of luminescence in Au28(SR)20 nanoclusters

Understanding the origin and structural basis of the photoluminescence (PL) phenomenon in thiolate-protected metal nanoclusters is of paramount importance for both fundamental science and practical applications. It remains a major challenge to correlate the PL properties with the atomic-level structure due to the complex interplay of the metal core (i.e. the inner kernel) and the exterior shell (i.e. surface Au(i)-thiolate staple motifs). Decoupling these two intertwined structural factors is critical in order to understand the PL origin. Herein, we utilize two Au₂₈(SR)₂₀ nanoclusters with different –R groups, which possess the same core but different shell structures and thus provide an ideal system for the PL study. We discover that the Au₂₈(CHT)₂₀ (CHT: cyclohexanethiolate) nanocluster exhibits a more than 15-fold higher PL quantum yield than the Au₂₈(TBBT)₂₀ nanocluster (TBBT: p-tert-butylbenzenethiolate). Such an enhancement is found to originate from the different structural arrangement of the staple motifs in the shell, which modifies the electron relaxation dynamics in the inner core to different extents for the two nanoclusters. The emergence of a long PL lifetime component in the more emissive Au₂₈(CHT)₂₀ nanocluster reveals that its PL is enhanced by suppressing the nonradiative pathway. The presence of long, interlocked staple motifs is further identified as a key structural parameter that favors the luminescence. Overall, this work offers structural insights into the PL origin in Au₂₈(SR)₂₀ nanoclusters and provides some guidelines for designing luminescent metal nanoclusters for sensing and optoelectronic applications.

Two Au₂₈(SR)₂₀ nanoclusters with an identical core but different shells exhibit a ∼15-fold difference in photoluminescence.

Transparent and luminescent glasses of gold thiolate coordination polymers

Obtaining transparent glasses made of functional coordination polymers (CPs) represents a tremendous opportunity for optical applications. In this context, the first transparent and red-emissive glasses of gold thiolate CPs have been obtained by simply applying mechanical pressure to amorphous powders of CPs. The three gold-based CP glasses are composed of either thiophenolate [Au(SPh)] n , phenylmethanethiolate [Au(SMePh)] n or phenylethanethiolate [Au(SEtPh)] n . The presence of a longer alkyl chain between the thiolate and the phenyl ring led to the formation of glass with higher transparency. The glass transitions, measured by thermomechanical analysis (TMA), occurred at lower temperature for CPs with longer alkyl chains. In addition, all three gold thiolate glasses exhibit red emission at 93 K and one of them, [Au(SMePh)] n , remains luminescent even at room temperature. An in-depth structural study of the amorphous gold thiolates by XRD, PDF and EXAFS analysis showed that they are formed of disordered doubly interpenetrated helical chains. These d10 metal-based compounds represent the first examples of transparent and luminescent CP glasses.

Post-synthetic functionalization and ligand exchange reactions in gold(i) phenylthiolate-based coordination polymers

Post-modification and ligand exchange reactions from 1D or 2D gold thiolate coordination polymers occur through a dissolution–recrystallization pathway.

A New Lamellar Gold Thiolate Coordination Polymer, [Au(m-SPhCO2H)]n, for the Formation of Luminescent Polymer Composites

The photoluminescence of gold thiolate clusters brings about many potential applications, but its origin is still elusive because of its complexity. A strategy in understanding the structure–properties relationship is to study closely related neutral gold thiolate coordination polymers (CPs). Here, a new CP is reported, [Au(m-SPhCO₂H)]_n. Its structure is lamellar with an inorganic layer made of Au–S–Au–S helical chains, similar to the [Au(p-SPhCO₂H)]_n analog. An in-depth study of its photophysical properties revealed that it is a bright yellow phosphorescent emitter with a band centered at 615 nm and a quantum yield (QY) of 19% at room temperature and in a solid state. More importantly, a comparison to the para-analog, which has a weak emission, displayed a strong effect of the position of the electron withdrawing group (EWG) on the luminescent properties. In addition, [Au(m-SPhCO₂H)]_n CPs were mixed with organic polymers to generate transparent and flexible luminescent thin films. The ability to tune the emission position with the appropriate contents makes these nontoxic polymer composites promising materials for lighting devices.

Self-Templated Assembly of AuI /AgI -Thiolate Sheets with Central Holes

Composite crystalline sheets of Au^I /Ag^I -thiolate with central holes are achieved by co-assembly of Ag^I -thiolate and Au^I -thiolate in one-pot without sacrificial template. Both Ag^I -thiolate and Au^I -thiolate can separately assemble to lamellar sheets with similar structures, which makes their co-assembly possible, while the differences in their assembly pathways make the co-assembly processes highly dynamic and complex. First, a core@shell structure with Ag^I -thiolate at the core was formed upon the mixing of the two, then the core@shell structure transformed to a hole@shell structure by dissociation of the core. Finally, some instable hole@shell structures further dissociated and grew on stable ones to generate holed Au^I /Ag^I -thiolate composite sheets, in which the two components neither have severe phase separation nor blend uniformly at atomic level. By tuning the feeding ratios, the average diameter of the holes can be controlled. Therefore, the work demonstrates the advantage of co-assembly technique in obtaining complex structurers. The holed sheets can further assemble to porous macroscopic materials and transform to composite metal nanoparticles by pyrolysis.

Reactions Coupled Self- and Co-Assembly: A Highly Dynamic Process and the Resultant Spatially Inhomogeneous Structure

Reactions coupled self-assembly represents a step forward towards biomimetic behavior in the field of supramolecular research. Here, two pH-dependent reactions of thiol-disulfide exchange and ligand exchange were used to couple with the self-assembly of an Au^I -thiolate coordination polymer consisting of two ligands. Thanks to the comparable rates between the reactions and self-assembly, the compositions of the assemblies change continuously with time, resulting in a highly dynamic assembly process and spatially inhomogeneous structure that are very common in life systems but cannot be easily obtained with one-pot artificial methods.

New Lamellar Silver Thiolate Coordination Polymers with Tunable Photoluminescence Energies by Metal Substitution

The structures of two lamellar silver thiolate coordination polymers [Ag( p-SPhCO₂H)] _n (1) and [Ag( p-SPhCO₂Me)] _n (2) are described for the first time. Their inorganic part is composed of distorted Ag₃S₃ honeycomb networks separated by noninterpenetrated thiolate ligands. The main difference between the two compounds arises from dimeric hydrogen bonds present for the carboxylic acids. Indepth photophysical studies show that the silver thiolates exhibit multiemission properties, implying luminescence thermochromism. More interestingly, the synthesis of a heterometallic lamellar compound, [Ag_0.85Cu_0.15( p-SPhCO₂H)] _n (3), allows to obtain mixed metal thiolate coordination polymers and to tune the photophysical properties with the excitation wavelengths from a green vibronic luminescence to a single red emission band.

Competing Roles of Crystallization and Degradation of a Metal-Organic Chalcogenolate Assembly under Biphasic Solvothermal Conditions

Metal-organic chalcogenolate assemblies have attracted recent interest as ensemble nanomaterials that contain one- or two-dimensional inorganic nanostructures in a periodic array with supramolecular isolation provided by an associated organic ligand lattice. Biphasic immiscible synthesis at liquid-liquid interfaces is a convenient way to grow crystalline d¹⁰ metal-organic chalcogenolate assemblies. However, there has been little systematic study of the role of temperature on the nucleation, growth, and stability of hybrid chalcogenolates during biphasic synthesis. Silver benzeneselenolate, a robustly blue-luminescent, lamellar metal-organic chalcogenolate assembly, was crystallized at biphasic immiscible liquid-liquid interfaces under solvothermal conditions. A positive correlation between temperature and nucleation density was observed, and the luminescence was conserved in all examples of the crystalline phase. Applying solvothermal conditions to the biphasic synthesis generally increased the lateral dimensions of the crystals and strongly favored the crystalline phase of the compound. Although thin, well-formed crystals were observed within 1 h for interfacial reactions performed at high temperatures, degradation was observed in long duration growths resulting in aggregated silver metal. A study of the thermal stability of the material via thermogravimetric analysis revealed that the decomposition is likely a redox reaction reverting the compound to silver metal and diphenyl diselenide. In situ analysis of this degradation was performed by grazing-incidence wide-angle X-ray scattering, which confirmed that the decomposition occurs in a single step with no preceding changes to the structure of the material. This work demonstrates that biphasic solvothermal methods are amenable to the synthesis of hybrid metal-organic chalcogenolate assemblies and that temperature can be used to control product morphology and lateral crystal growth at the immiscible interface.

Kinetic Study on the Self-Assembly of Au(I)-Thiolate Lamellar Sheets: Preassembled Precursor vs Molecular Precursor

Molecular self-assembly has played an important role in nanofabrication. Due to the weak driving forces of noncovalent bonds, developing molecular nanoassemblies that have both robust preparation conditions and stable structure is a challenge. In our previous work, we have developed a reversible self-assembly system of Au(I)-thiolate coordination polymer (ATCP) to form colloidal lamellar sheets and demonstrated the high tailorability and stability of their structures, as well as their promising applications in gold nanocluster/nanoparticle fabrication and UV light shielding. Here, we first reported our progress in exploring a robust and green assembly protocol toward ATCP colloidal lamellar sheets in water by allowing the molecular precursors of HAuCl₄ and the thiol ligand to form ATCP preassembled intermediates. In this way, colloidal ATCP lamellar sheets can be prepared in a wide range of synthetic concentrations ([Au]₀ ≥ 2 × 10^-4 M) and at broad assembly temperatures (80-100 °C) with similar high yields (>80%). The assembly kinetics at different conditions are also studied in detail to help understand the robust assembly process. The robust and green synthetic protocols will pave a way for their real applications.

Solvent-induced stable pseudopolymorphism of Au(i)–thiolate lamellar assemblies: a model system for understanding the environment acclimation of biomacromolecules

Two pseudopolymorphs are achieved in two solvents and exhibit high structure preservation but have distinct optical properties, morphology and thermal stability.

Coordination-Controlled One-Dimensional Molecular Chains in Hexapodal Adenine-Silver Ultrathin Films

Growth of a silver coordination polymer of a C₃-symmetric hexaadenine ligand is studied on highly oriented pyrolytic graphite (HOPG), using high-resolution atomic force microscopy (AFM). This unusual ligand offers 6-fold multidentate coordination sites, and consequently, a multidimensional growth of coordination polymer is expected. Notably, each discrete hexapodal unit is bridged by two silver ions along one of the crystallographic directions, resulting in high interaction energy along this direction. When the polymer was deposited on an HOPG surface from a dilute solution, we observed abundant one-dimensional (1D) coordination polymer chains, with a minimum width of approximately 4.5 nm. The single-crystal structure using X-ray analysis is compared with the surface patterns to reconcile and understand the structure of the 1D polymer on an HOPG surface. The energy levels of Ag-L1 within the proposed model were calculated, on the basis of the X-ray crystal structure, and compared to the ligand states to gain information about the electronic structure of ligand upon Ag coordination. On the basis of the wave functions of a few molecular orbitals (MOs) near the Fermi energy, it is surmised that unfilled MOs may play a crucial role in the transport properties of the Ag-L1 adlayer.

Intrinsic triple-emitting 2D copper thiolate coordination polymer as a ratiometric thermometer working over 400 K range

A new lamellar, [Cu(p-SPhCO₂Me)]_n, coordination polymer exhibits intrinsic triple emission with great potential as optical thermometer working over 400 K range and up to 500 K.