Enhancing photocatalytic wastewater treatment: investigating the promising applications of nickel ferrite and its novel nanocomposites

Water contamination ranks highest among the challenges posed by the rapidly increasing environmental contamination, which is thought to be the most pressing issue globally. The development of innovative techniques for the successful removal of diverse types of undesirable pollutants from wastewater would therefore yield a huge return on investment. Nowadays, the removal of many organic and synthetic pollutants from the environmental matrix is anticipated to be possible by photocatalytic degradation, owing to its low energy consumption, high catalytic activity, and low overall cost. In this context, magnetic nanoparticles received greater attention as photocatalytic materials from the scientific community in wastewater treatment for the removal of different kinds of pollutants due to their specific properties. The present study provides an overview of the recent advances in water treatment using nickel ferrite nanoparticles and their nanocomposites as photocatalysts. Furthermore, a proposed mechanism for these photocatalysts to generate active free radicals under visible and ultraviolet light has been described. The review concludes that photocatalysts based on NiFe2O4 have potential applications in water purification technologies. However, more research is still needed to determine their practical application in water treatment facilities.

Nanostructured ZnO with Tunable Morphology from Double-Salt Ionic Liquids as Soft Template

ZnO nanostructures with tunable morphology were synthesized by the hydrothermal method from two ionic liquids (ILs), 1-ethyl-3-methylimidazolium acetate [C2mim]CH3CO2 and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [C2mim](CF3SO2)2N and their corresponding double-salt ILs (DSILs). ILs served as soft templates. DSILs were noted for the production of smaller particle size along with uniformity compared to their pure IL counterparts. A changeover of the shape of ZnO from nano-prism to a hexagonal disk-like structure was observed with the addition of [C2mim]CH3CO2 in the medium during synthesis while nano-dice- and rod-shaped particles were obtained from [C2mim](CF3SO2)2N. The effect of concentration of both ILs was explored for the variations of size and shape, and at high concentrations, the morphology was distinct and sharp with uniform size in each case. The synthesized products exhibited excellent phase (wurtzite) purity and polycrystalline nature. The smallest crystallite size was acquired from DSILs, indicating the advantageous effect of the dual anions. The selective adsorption effect of [C2mim]CH3CO2 on certain facets promoted the growth of ZnO clusters along the [1010] direction, while [C2mim](CF3SO2)2N favored the growth along the [0001] direction. Consequently, DSILs rendered interpenetrating hexagonal disks due to the combined action of the anions for controlling the shape. The band gap energies of the nanoparticles (NPs) were consistent with the distribution of size. Extremely strong red emission and negligible UV emission for the synthesized ZnO NPs demonstrate their potential in the advancement of optoelectronic devices.

Hydrophilic ionic liquid assisted hydrothermal synthesis of ZnO nanostructures with controllable morphology

Nanostructured ZnO with controllable morphology was prepared by a hydrothermal method in the presence of three different hydrophilic ionic liquids (ILs), 1-ethyl-3-methylimidazolium methylsulfate, ([C2mim]CH3SO4), 1-butyl-3-methylimidazolium methylsulfate, ([C4mim]CH3SO4) and 1-ethyl-3-methylimidazolium ethylsulfate, ([C2mim]C2H5SO4) as soft templates. The formation of ZnO nanoparticles (NPs) with and without IL was verified using FT-IR and UV-visible spectroscopy. X-ray diffraction (XRD) and selected area electron diffraction (SAED) patterns indicated the formation of pure crystalline ZnO with a hexagonal wurtzite phase. Field emission scanning electron microscopic (FESEM) and high-resolution transmission electron microscopic (HRTEM) images confirmed the formation of rod-shaped ZnO nanostructures without using IL, whereas the morphology varied widely following addition of ILs. With increasing concentrations of [C2mim]CH3SO4, the rod-shaped ZnO nanostructures transformed into flower-shaped nanostructures whereas with rising concentrations of [C4mim]CH3SO4 and [C2mim]C2H5SO4 the morphology changed into petal- and flake-like nanostructures, respectively. The selective adsorption effect of the ILs could protect certain facets during the formation of ZnO rods and promote the growth in directions other than [0001] to yield petal- or flake-like architectures. The morphology of ZnO nanostructures was, therefore, tunable by the controlled addition of hydrophilic ILs of different structures. The size of the nanostructures was widely distributed and the Z-average diameter, evaluated from dynamic light scattering measurements, increased as the concentration of the IL increased and passed through a maximum before decreasing again. The optical band gap energy of the ZnO nanostructures decreased when IL was added during the synthesis which is consistent with the morphology of the ZnO nanostructures. Thus, the hydrophilic ILs serve as self-directing agents and soft templates for the synthesis of ZnO nanostructures and the morphology and optical properties of ZnO nanostructures are tunable by changing the structure of the ILs as well as systematic variation of the concentration of ILs during synthesis.

Current advancements on the fabrication, modification, and industrial application of zinc oxide as photocatalyst in the removal of organic and inorganic contaminants in aquatic systems

Industrial wastewaters contain hazardous contaminants that pollute the environment and cause socioeconomic problems, thus demanding the employment of effective remediation procedures such as photocatalysis. Zinc oxide (ZnO) nanomaterials have emerged to be a promising photocatalyst for the removal of pollutants in wastewater owing to their excellent and attractive characteristics. The dynamic tunable features of ZnO allow a wide range of functionalization for enhanced photocatalytic efficiency. The current review summarizes the recent advances in the fabrication, modification, and industrial application of ZnO photocatalyst based on the analysis of the latest studies, including the following aspects: (1) overview on the properties, structures, and features of ZnO, (2) employment of dopants, heterojunction, and immobilization techniques for improved photodegradation performance, (3) applicability of suspended and immobilized photocatalytic systems, (4) application of ZnO hybrids for the removal of various types of hazardous pollutants from different wastewater sources in industries, and (5) potential of bio-inspired ZnO hybrid nanomaterials for photocatalytic applications using renewable and biodegradable resources for greener photocatalytic technologies. In addition, the knowledge gap in this field of work is also highlighted.

Construction of Bio-Piezoelectric Platforms: From Structures and Synthesis to Applications

Piezoelectric materials, with their unique ability for mechanical-electrical energy conversion, have been widely applied in important fields such as sensing, energy harvesting, wastewater treatment, and catalysis. In recent years, advances in material synthesis and engineering have provided new opportunities for the development of bio-piezoelectric materials with excellent biocompatibility and piezoelectric performance. Bio-piezoelectric materials have attracted interdisciplinary research interest due to recent insights on the impact of piezoelectricity on biological systems and their versatile biomedical applications. This review therefore introduces the development of bio-piezoelectric platforms from a broad perspective and highlights their design and engineering strategies. State-of-the-art biomedical applications in both biosensing and disease treatment will be systematically outlined. The relationships between the properties, structure, and biomedical performance of the bio-piezoelectric materials are examined to provide a deep understanding of the working mechanisms in a physiological environment. Finally, the development trends and challenges are discussed, with the aim to provide new insights for the design and construction of future bio-piezoelectric materials.

Controlled titration-based ZnO formation

Hexamethylenetetramine (HMTA) is commonly used as a base releasing agent for the synthesis of ZnO under mild aqueous conditions. HMTA hydrolysis leads to gradual formation of a base during the reaction. Use of HMTA, however, does have limitations: HMTA hydrolysis yields both formaldehyde and ammonia, it provides no direct control over the ammonia addition rate or the total amount of ammonia added during the reaction, it results in a limited applicable pH range and it dictates the accessible reaction temperatures. To overcome these restrictions, this work presents a direct base titration strategy for ZnO synthesis in which a continuous base addition rate is maintained. Using this highly flexible strategy, wurtzite ZnO can be synthesized at a pH >5.5 using either KOH or ammonia as a base source at various addition rates and reaction pH values. In situ pH measurements suggest a similar reaction mechanism to HMTA-based synthesis, independent of the varied conditions. The type and concentration of the base used for titration affect the reaction product, with ammonia showing evidence of capping behaviour. Optimizing this strategy, we are able to influence and direct the crystal shape and significantly increase the product yield to 74% compared to the ∼13% obtained by the reference HMTA reaction.

Low-temperature large-area fabrication of ZnO nanowires on flexible plastic substrates by solution-processible metal-seeded hydrothermal growth

We have developed the low-temperature conformal ZnO nanowire fabrication on flexible plastic substrates by utilizing the solution-processible metal seed-assisted hydrothermal ZnO crystallization. Structural evolution of ZnO nanowires controlled by major parameters involving growth temperature, growth time, and seed coating condition, has been systematically investigated towards uniform and large-area growth of conformal ZnO nanowires. Direct ZnO nanowire growth on flexible plastics without undergoing the high-temperature seed sintering has been realized by developing the low-temperature Ag-seeded hydrothermal ZnO nanowire growth. The nanoporous Ag layer favorable for ZnO crystal nucleation and continued nanowire growth can be reduced from the Ag ion solution coating at the temperature as low as 130 °C. This tactfully enables the selective hydrothermal growth of ZnO nanowires on the Ag patterns on flexible plastics. Such an all-solution-processible low-temperature fabrication protocol may provide an essential and practical solution to develop many diverse applications including wearable and transparent electronics, sensors, and photocatalytic devices. As one example, we demonstrate that a transparent UV sensor can be devised based on the ZNW growth on the Ag micromesh electrode.

Graphene Oxide-Assisted Morphology and Structure of Electrodeposited ZnO Nanostructures

In this paper, ZnO electrodeposition was studied with the presence of graphene oxide (GO) exploited as a possible structure-directing agent. The effect of deposition potential and duration on the morphology and structure of ZnO was analyzed. The morphology and structure of the hybrids was analyzed by Raman spectroscopy, X-ray diffraction (XRD), and Scanning Electron Microscopy (SEM). The Raman results indicate a successful modification of ZnO with GO sheets and a hybridization threshold of 10 mg L⁻¹ by the evolution of the defect related band of ZnO at 580 cm⁻¹. The morphology results show that a low GO content only slightly influences the morphology and orientation of ZnO nanostructures while a high content as 10 mg L⁻¹ changes the morphology in nanoplates and growth orientation to lateral. The results show that while GO participated in the deposition reaction, it has a two-fold role, also by structure-controlling ZnO, indicating that the approach is valid for the use of GO as a structure-directing agent for the fabrication of ZnO nanostructures by electrodeposition with varying morphologies and orientations.

Low temperature growth of (AlGa)2O3 films by oxygen radical assisted pulsed laser deposition

Low temperature growth of β-(AlGa)₂O₃ films has been realized by oxygen radical assisted pulsed laser deposition.

Tailoring the electroluminescence of a single microwire based heterojunction diode using Ag nanowires deposition

A single Ga-doped ZnO microwire covered by Ag nanowires (AgNWs@ZnO:Ga MW) was utilized to construct a promising ultraviolet light source, with p-GaN serving as a hole injection layer.

Adsorptive removal and photocatalytic degradation of organic pollutants using metal oxides and their composites: A comprehensive review

Metal oxide nanomaterials and their composites are comprehensively reviewed for water remediation. The controlled morphological and textural features, variable surface chemistry, high surface area, specific crystalline nature, and abundant availability make the nanostructured metal oxides and their composites highly selective materials for efficient removal of organic pollutants based on adsorption and photocatalytic degradation. A wide range of metal oxides like iron oxides, magnesium oxide, titanium oxides, zinc oxides, tungsten oxides, copper oxides, metal oxides composites, and graphene-metal oxides composites having variable structural, crystalline and morphological features are reviewed emphasizing the recent development, challenges, and opportunities for adsorptive removal and photocatalytic degradation of organic pollutants viz. dyes, pesticides, phenolic compounds, and so on. It also covers the deep discussion on the photocatalytic mechanism of metal oxides and their composites along with the properties relevant to photocatalysis. High photodegradation efficiency, economically-viable approaches for the preparation of photocatalytic materials, and controlled band-gap engineering make metal oxides highly efficient photocatalysts for degradation of organic pollutants. The review would be an excellent resource for researchers who are currently focusing on metal oxides-based materials for water remediation as well as for those who are interested in adsorptive and photocatalytic applications of metal oxides and their composites.

Construction of Ni-doped SnO2-SnS2 heterojunctions with synergistic effect for enhanced photodegradation activity

Construction of heterostructures with proper band alignment and effective transport and separation of photogenerated charges is highly expected for photocatalysis. In this work, Ni-doped SnO₂-SnS₂ heterostructures (NiSnSO) are simply prepared by thermal oxidation of Ni-doped hierarchical SnS₂ microspheres in the air. When applied for the photodegradation of organic contaminants, these NiSnSO exhibit excellent catalytic performance and stability due to the following advantages: (1) Ni doping leads to the enhancement of light harvesting of SnS₂ in the visible light regions; (2) the formed heterojunctions promote the transport and separation of photogenerated electrons from SnS₂ to SnO₂; (3) Ni-SnO₂ quantum dots facilitate the enrichment of reactants, provide more reactive centers and accelerate product diffusion in the reactive centers; (4) the SnS₂ hierarchical microspheres constituted by nanoplates provide abundant active sites, high structural void porosity and accessible inner surface to faciliate the catalytic reactions. As a result, the optimized NiSnSO can photodegrade 92.7% methyl orange within 80 min under the irradiation of simulated sunlight, greatly higher than those of pure SnS₂ (29.8%) and Ni-doped SnS₂ (52.1%). These results reveal that the combination of heteroatom doping and heterostructure fabrication is a very promising strategy to deliver nanomaterials for effectively photocatalytic applications.

n–n ZnO–Ag2CrO4 heterojunction photoelectrodes with enhanced visible-light photoelectrochemical properties

In this study, ZnO nanorods (NRs) were hydrothermally grown on an Au-coated glass substrate at a relatively low temperature (90 °C), followed by the deposition of Ag₂CrO₄ particles via a successive ionic layer adsorption and reaction (SILAR) route. The content of the Ag₂CrO₄ particles on ZnO NRs was controlled by changing the number of SILAR cycles. The fabricated ZnO–Ag₂CrO₄ heterojunction photoelectrodes were subjected to morphological, structural, compositional, and optical property analyses; their photoelectrochemical (PEC) properties were investigated under simulated solar light illumination. The photocurrent responses confirmed that the ability of the ZnO–Ag₂CrO₄ heterojunction photoelectrodes to separate the photo-generated electron–hole pairs is stronger than that of bare ZnO NRs. Impressively, the maximum photocurrent density of about 2.51 mA cm⁻² at 1.23 V (vs. Ag/AgCl) was measured for the prepared ZnO–Ag₂CrO₄ photoelectrode with 8 SILAR cycles (denoted as ZnO–Ag₂CrO₄-8), which exhibited about 3-fold photo-enhancement in the current density as compared to bare ZnO NRs (0.87 mA cm⁻²) under similar conditions. The improvement in photoactivity was attributed to the ideal band gap and high absorption coefficient of the Ag₂CrO₄ particles, which resulted in improved solar light absorption properties. Furthermore, an appropriate annealing treatment was proven to be an efficient process to increase the crystallinity of Ag₂CrO₄ particles deposited on ZnO NRs, which improved the charge transport characteristics of the ZnO–Ag₂CrO₄-8 photoelectrode annealed at 200 °C and increased the performance of the photoelectrode. The results achieved in the present work present new insights for designing n–n heterojunction photoelectrodes for efficient and cost-effective PEC applications and solar-to-fuel energy conversions.

ZnO NRs hydrothermally grown on Au coated glass substrate, followed by deposition of Ag₂CrO₄ particles via SILAR route. The content of the Ag₂CrO₄ particles on the ZnO NRs were controlled by changing the number of SILAR cycles.

Fabrication and photocatalytic property of magnetic SrTiO3/NiFe2O4 heterojunction nanocomposites

Novel multifunctional SrTiO3/NiFe2O4 nanocomposites were successfully fabricated via a two-step route. The as-prepared samples were characterized by using X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), energy dispersive spectroscopy (EDS), field-emission transmission electron microscopy (TEM), UV-visible diffuse reflectance spectroscopy (DRS), X-ray photoelectron spectroscopy (XPS), photoluminescence (PL) spectroscopy and vibrating sample magnetometry (VSM). The results indicate that the SrTiO3/NiFe2O4 heterostructures are composed of SrTiO3 spheroidal nanoparticles adhered to NiFe2O4 polyhedra. The heterojunction established in the composite material accelerates the process of electron-hole pair separation and boosts the photo-Fenton reaction. Among the samples, 15 wt% SrTiO3/NiFe2O4 nanocomposites exhibit a powerful light response and excellent room temperature ferromagnetism. Subsequently, the photocatalytic degradation of RhB over the as-prepared samples was investigated and optimized, revealing that the 15 wt% SrTiO3/NiFe2O4 nanocomposites exhibit the best photocatalytic activity and stability under simulated solar light irradiation. Furthermore, according to experimental results, the possible mechanism of improved photocatalytic activity was also proposed.

Fabrication of selective interface of ZnO/CdS heterostructures for more efficient photocatalytic hydrogen evolution

Selective interface in ZnO/CdS heterostructure promote the photocatalytic activity.

A windable and stretchable three-dimensional all-inorganic membrane for efficient oil/water separation

There is strong interest in windable and stretchable membranes to meet the technological demands of practical water treatments. Oil/water separating membranes of this type is still significantly underdeveloped. Here, we reported a windable and stretchable membrane with three-dimensional structure for efficient oil/water separation. This membrane is made of ZnO nanorods arrays conformally grown on woven carbon microfibers. This three-dimensional architecture endows the fabricated membrane with highly windable and stretchable properties, at the same time ensures ZnO nanorods fully exposed outwards on the membrane surface. Due to its superior hydrophilicity and oleophobicity of ZnO nanorods, this all-inorganic membrane exhibits outstanding antifouling property, with the foulants on membrane surfaces easily removed by simple physical cleaning without chemicals. The membrane can effectively separate both oil/saline-water mixtures and oil-in-water emulsions, solely driven by gravity, with extremely high permeation flux of 20933.4 L m^-2 h^-1 and high separation efficiency over 99%.

Mechanism insight of PFOA degradation by ZnO assisted-photocatalytic ozonation: Efficiency and intermediates

Zinc oxide (ZnO) nanorods were prepared by a directly pyrolysis method and employed as catalyst for perfluorooctanoic acid (PFOA) degradation. Comparative experiments were conducted to discuss the catalytic activity and flexibility of ZnO. After ZnO addition, the best PFOA degradation efficiency (70.5%) was achieved by ZnO/UV/O₃ system, only 9.5% by sole ozonation and 18.2% by UV₂₅₄ light irradiation. PFOA degradation was sensitive with pH value and temperature. The better PFOA removal efficiency was achieved at acidic condition. A novel relationship was found among PFOA degradation efficiency with hydroxyl radicals and photo-generated holes. Hydroxyl radicals generated on the surfaces of ZnO nanorods played dominant roles in PFOA degradation. PFOA degradation was found to follow the photo-Kolbe reaction mechanism. C₂-C₇ shorter-chain perfluorocarboxylic acids and fluoride ion were detected as main intermediates during PFOA degradation process. Based on the results, a proposal degradation pathway was raised.

Effect of ZnO nanostructures on the optical properties of white light-emitting diodes

White light produced by blue LEDs with yellow phosphor is the most widely used methods, but it results in poor quality in angular CCT uniformity. In this work, a novel technique was introduced to solve this problem by integrating different ZnO nanostructures into white light-emitting diodes. The experiment of ZnO doped films and the simulation of Finite-Difference Time-Domain (FDTD) were carried out. The result indicated scattering effect of ZnO nanoparticles could improve uniformity of scattering energy effectively. Moreover, the effect of ZnO nanostructures on white light-emitting diodes (wLEDs) devices was also investigated. The CCT deviation of wLEDs devices would decrease from 3455.49 K to 96.30 K, 40.03 K and 60.09 K when the node-like (N-ZnO), sheet-like (S-ZnO) and rod-like ZnO (R-ZnO) respectively applied. The higher CCT uniformity and little luminous flux dropping were achieved when the optimal concentrations of N-ZnO, S-ZnO, and R-ZnO nanostructures were 0.25%, 0.75%, and 0.25%. This low-cost and green manufacturing method has a great impact on development of white light-emitting diodes.

Insights into the structure-induced catalysis dependence of simply engineered one-dimensional zinc oxide nanocrystals towards photocatalytic water purification

One-dimensional nanocrystalline semiconductors have been comprehensively studied because of their fascinating properties and practical applications in various fields.

Room temperature sintering of polar ZnO nanosheets: I-evidence

Unambiguous evidence of the spontaneous loss of surface area at room temperature in polar ZnO.

Nanoplate-assembled hierarchical cake-like ZnO microstructures: solvothermal synthesis, characterization and photocatalytic properties

Hierarchical nanoplate-assembled cake-like ZnO microstructures were synthesized via a DMF-assisted solvothermal route by using NH₄BF₄ as a fluoride source.

Tailoring the surface of ZnO nanorods into corrugated nanorods via a selective chemical etch method

Using the chemical vapour deposition method, we successfully converted smooth ZnO nanorods (NRs) into corrugated NRs by simply increasing the reaction time. The surface morphology and crystallographic structure of the corrugated NRs were investigated. The corrugated NRs were decorated by alternant [Formula: see text] and [Formula: see text] planes at the exposed side surfaces while the conventional [Formula: see text] planes disappeared. No twinning boundaries were found in the periodically corrugated structures, indicating that they were type II corrugated NRs. Further investigation told us that they were selectively etched. We introduced a hydrothermal method to synthesize the smooth ZnO NRs and then etched them in a tube furnace at 950 °C with a flow of carbon monoxide. By separating the growth stage and the selective etching stage, we explicitly demonstrated a successfully selective etching effect on ZnO NRs with a carbon monoxide reducing atmosphere for the first time. An etching mechanism based on the selective reaction between carbon monoxide and the different exposed surfaces was proposed. Our results will improve the understanding of the growth mechanism on coarse or corrugated NRs and provide a new strategy for the application of surface controlled nanostructured materials.

Au@ZnO core–shell nanostructures with plasmon-induced visible-light photocatalytic and photoelectrochemical properties

Au@ZnO core–shell nanostructures exhibit enhanced photocatalysis under both simulated sunlight and monochromatic LED light due to the synergistic effect between the plasmonic Au-nanosphere cores and the semiconducting ZnO shells.

Hydrophilic ionic liquid-assisted control of the size and morphology of ZnO nanoparticles prepared by a chemical precipitation method

A hydrophilic ionic liquid (IL), [EMIM][MeSO₄] served as a self directing template during synthesis of ZnO nanoparticles (NPs) by chemical precipitation and the size and morphology of ZnO NPs depended on the concentration of the IL.