Synergistic effect of cyano defects and CaCO3 in graphitic carbon nitride nanosheets for efficient visible-light-driven photocatalytic NO removal

Photo-oxidation with semiconductor photocatalysts provides a sustainable and green solution for NO_x elimination. Nevertheless, the utilization of traditional photocatalysts in efficient and safe photocatalytic NO_x removal is still a challenge due to the slow charge kinetic process and insufficient optical absorption. In this paper, we report a novel porous g-C₃N₄ nanosheet photocatalyst modified with cyano defects and CaCO₃ (xCa-CN). The best performing sample (0.5Ca-CN) exhibits an enhanced photo-oxidation NO removal rate (51.18 %) under visible light irradiation, largely surpassing the value of pristine g-C₃N₄ nanosheets (34.05 %). Such an enhancement is mainly derived from an extended visible-light response, improved electron excitation and transfer, which are associated with the synergy of cyano defects and CaCO₃, as evidenced by a series of spectroscopic analyses. More importantly, in-situ DRIFTS and density functional theory (DFT) results suggest that the introduction of cyano defects and CaCO₃ enables control over NO adsorption and activation processes, making it possible to implement a preference pathway (NO → NO⁺ → NO₃¯) and reduce the emission of toxic intermediate NO₂. This work demonstrates the potential of integrating defect engineering and insulator modification to design highly efficient g-C₃N₄-based photocatalysts for air purification.

Highly active Cs2SnCl6/C3N4 heterojunction photocatalysts operating via interfacial charge transfer mechanism

In this study, a novel lead-free perovskite heterojunction Cs₂SnCl₆/C₃N₄ composite was constructed and applied for photocatalytic NO purification. After design optimization, the Cs₂SnCl₆/C₃N₄ heterojunction exhibit excellent and stable photocatalytic NO purification ability under visible-light irradiation, which is significantly better than pristine Cs₂SnCl₆ and C₃N₄. Combined in-situ DRIFTS and electron spin resonance spin-trapping, the mechanism of Cs₂SnCl₆/C₃N₄ photocatalytic NO removal was revealed. Under visible-light irradiation, the photo-generated electrons on the conduction band of C₃N₄ would spontaneously migrate to the CB of Cs₂SnCl₆, leaving holes (h⁺) on the valence band of C₃N₄, contributing to efficiently segregated charge carriers and improved photocatalytic NO purification. Density functional theory calculations also revealed the directional electron transfer at the C₃N₄ and Cs₂SnCl₆ interface, in which the charge was migrated from C₃N₄ to Cs₂SnCl₆ induced by the internal electric field. This research sheds fresh light on the fabrication of Cs₂SnCl₆/C₃N₄ heterojunctions as well as its effective interfacial charge separation.

Non-Oxidative Propane Dehydrogenation on CrOx-ZrO2-SiO2 Catalyst Prepared by One-Pot Template-Assisted Method

A series of CrO_x-ZrO₂-SiO₂ (CrZrSi) catalysts was prepared by a "one-pot" template-assisted evaporation-induced self-assembly process. The chromium content varied from 4 to 9 wt.% assuming Cr₂O₃ stoichiometry. The catalysts were characterized by XRD, SEM-EDX, temperature-programmed reduction (TPR-H₂), Raman spectroscopy, and X-ray photoelectron spectroscopy. The catalysts were tested in non-oxidative propane dehydrogenation at 500-600 °C. The evolution of active sites under the reaction conditions was investigated by reductive treatment of the catalysts with H₂. The catalyst with the lowest Cr loading initially contained amorphous Cr³⁺ and dispersed Cr⁶⁺ species. The latter reduced under reaction conditions forming Cr³⁺ oxide species with low activity in propane dehydrogenation. The catalysts with higher Cr loadings initially contained highly dispersed Cr³⁺ species stable under the reaction conditions and responsible for high catalyst activity. Silica acted both as a textural promoter that increased the specific surface area of the catalysts and as a stabilizer that inhibited crystallization of Cr₂O₃ and ZrO₂ and provided the formation of coordinatively unsaturated Zr⁴⁺ centers. The optimal combination of Cr³⁺ species and coordinatively unsaturated Zr⁴⁺ centers was achieved in the catalyst with the highest Cr loading. This catalyst showed the highest efficiency.

Photocatalytic reaction mechanisms at the gas–solid interface for environmental and energy applications

Five gas–solid photocatalytic reactions including the oxidation of NOx, VOCs and NH3, and reduction of CO2 and N2 are summarized. Besides, basic properties of gas molecules, their adsorption and activation, and various reaction pathways are analyzed.

Adsorption performance of CMK-3 and C-FDU-15 in NO removal at low temperature

CMK-3 and C-FDU-15 samples were synthesized using hard-templating and evaporation-induced self-assembly (EISA) methods, respectively. The pore structures of CMK-3 and C-FDU-15 as well as commercial activated carbon were characterized by means of X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, and N₂ adsorption-desorption. Adsorption of NO was investigated by means of thermogravimetric analysis, temperature-programmed desorption of NO + O₂, and in situ diffuse reflectance Fourier transform infrared spectroscopy. The results show that the CMK-3 and C-FDU-15 materials possessed ordered and uniform structures. The co-adsorption capacity of NO and O₂ decreased in the sequence CMK-3 (88.6 mg/g) > C-FDU-15 (71.7 mg/g) > AC (25.3 mg/g). There were two main adsorption species on CMK-3 and C-FDU-15: nitrite and nitrate. Nitrite is converted to nitrate easily. However, the adsorption species were more complex on AC, with nitrite being the main species. Moreover, CMK-3 and C-FDU-15 exhibit excellent regeneration efficiency compared with AC. The excellent NO adsorption performance of CMK-3 and C-FDU-15 was associated with their ordered mesoporous structures and high surface areas. The research provides more options for NO adsorption in the future.

Raspberry-Like Microspheres of Core-Shell Cr2 O3 @TiO2 Nanoparticles for CO2 Photoreduction

To promote the interaction of p-n semiconductors, raspberry-like microspheres of core-shell Cr2 O3 @TiO2 nanoparticles have been fabricated through a five-step process. Raman spectroscopy of products calcined at various temperatures reveal that the titania shell causes crystal distortion of the Cr2 O3 core, without changing the microstructures of the fabricated core-shell microspheres. In situ and time-resolved synchrotron-based powder XRD reveals the formation of monoclinic TiO2 in the fourth step, but these monoclinic TiO2 nanocrystals undergo a phase transition when the applied calcination temperature is above 550 °C. As a result, TiO2 (B), a magnéli phase of Ti4 O7 and Cr2 Ti6 O15 compounds, resulting from inner doping between Cr2 O3 and TiO2 , is formed. The close interaction of Cr2 O3 and TiO2 forms a p-n junction that decreases the recombination of photogenerated electron-hole pairs, leading to enhanced production of CH4 by photocatalytic reduction of CO2 .

Controlling the secondary pollutant on B-doped g-C3N4 during photocatalytic NO removal: a combined DRIFTS and DFT investigation

The mechanisms of enhanced photocatalysis efficiency and suppression of toxic intermediate production during photocatalytic NO oxidation on B-doped g-C₃N₄ were revealed.

Visible light induced electron transfer from a semiconductor to an insulator enables efficient photocatalytic activity on insulator-based heterojunctions

Photogenerated electrons play a vital role in photocatalysis as they can induce the formation of radicals participating in the reaction or recombine with holes preventing them from the subsequent redox reaction. In this work, we explore an Earth-abundant insulator coupled with a semiconductor and construct insulator-semiconductor heterojunctions to effectively realize the efficient electron transfer from the semiconductor to the insulator and thus the enhanced charge carrier separation on the semiconductor. This result will challenge the traditional opinion that free electrons cannot be transferred onto insulators. Taking the BaCO3 insulator as a case study, the combined experimental and theoretical evidence indicates that the photogenerated electrons from the BiOI semiconductor could transfer directly to the BaCO3 insulator through a preformed electron delivery channel when they are coupled to form BaCO3/BiOI heterojunctions. The potential difference between the Bi layer of BiOI (5.03 eV) and the carbonate layer of BaCO3 (12.37 eV) would drive the transfer of excited electrons from Bi atoms across the energy barrier to the adjacent carbonate layer under visible light irradiation. Consequently, the free electrons on BaCO3 can be utilized to produce the oxidative radicals (˙OH, ˙O2- and 1O2) participating in the photocatalytic oxidation reaction. The in situ FT-IR spectra illustrate that the visible light induced active species in the heterojunctions could react with NO, leading to its oxidation to high valence state intermediates (NO+ and NO2+) first and then conversion to the final product of nitrates. This research offers new perspectives to explore insulator-based photocatalysts and unravel the gas-phase photocatalytic reaction mechanism.

Efficient and stable photocatalytic NO removal on C self-doped g-C3N4: electronic structure and reaction mechanism

The unique electronic structure of C self-doped g-C₃N₄ enables highly enhanced photocatalytic NO removal efficiency.

Highly Efficient Performance and Conversion Pathway of Photocatalytic NO Oxidation on SrO-Clusters@Amorphous Carbon Nitride

This work demonstrates the first molecular-level conversion pathway of NO oxidation over a novel SrO-clusters@amorphous carbon nitride (SCO-ACN) photocatalyst, which is synthesized via copyrolysis of urea and SrCO₃. The inclusion of SrCO₃ is crucial in the formation of the amorphous carbon nitride (ACN) and SrO clusters by attacking the intralayer hydrogen bonds at the edge sites of graphitic carbon nitride (CN). The amorphous nature of ACN can promote the transportation, migration, and transformation of charge carriers on SCO-ACN. And the SrO clusters are identified as the newly formed active centers to facilitate the activation of NO via the formation of Sr-NO^δ(+), which essentially promotes the conversion of NO to the final products. The combined effects of the amorphous structure and SrO clusters impart outstanding photocatalytic NO removal efficiency to the SCO-ACN under visible-light irradiation. To reveal the photocatalytic mechanism, the adsorption and photocatalytic oxidation of NO over CN and SCO-ACN are analyzed by in situ DRIFTS, and the intermediates and conversion pathways are elucidated and compared. This work presents a novel in situ DRIFTS-based strategy to explore the photocatalytic reaction pathway of NO oxidation, which is quite beneficial to understand the mechanism underlying the photocatalytic reaction and advance the development of photocatalytic technology for environmental remediation.

Promotional effect and mechanism study of nonmetal-doped Cr/CexTi1−xO2 for NO oxidation: tuning O2 activation and NO adsorption simultaneously

Nonmetal-doped Cr/Ce_xTi_1−xO₂ was conductive to tune O₂ activation and NO adsorption strength simultaneously. Moreover, the catalytic mechanism was investigated for NO oxidation.