Adsorption of polyelectrolytes to like-charged substrates induced by multivalent counterions as exemplified by poly(styrene sulfonate) and silica

Low Fouling Polyelectrolyte Layer-by-Layer Self-Assembled Membrane for High Performance Dye/Salt Fractionation: Sequence Effect of Self-Assembly

Layer-by-layer (LbL) self-assembly of oppositely charged polyelectrolytes (PEs) is usually performed on a conventional ultrafiltration base substrate (negative zeta potential) by depositing a cationic PE as a first layer. Herein, we report the facile and fast formation of high performance molecular selective membrane by the nonelectrostatic adsorption of anionic PE on the polyvinylidene fluoride (PVDF, zeta potential -17 mV) substrate followed by the electrostatic LbL assembly. Loose nanofiltration membranes have been prepared via both concentration-polarization (CP-LbL, under applied pressure) driven and conventional (C-LbL, dipping) LbL self-assembly. When the first layer is poly(styrene sodium) sulfonic acid, the LbL assembled membrane contains free -SO3- groups and exhibits higher rejection of Na2SO4 and lower rejection of MgCl2. The reversal of salt rejection occurs when the first layer is quaternized polyvinyl imidazole (PVIm-Me). The membrane (five layers) prepared by first depositing PStSO3Na shows higher rejection of several dyes (97.9 to >99.9%), higher NaCl to dye separation factor (52-1800), and higher dye antifouling performance as compared to the membrane prepared by first depositing PVIm-Me (97.5-99.5% dye rejection, separation factor ∼40-200). However, the C-LbL membrane requires a longer time of self-assembly or higher PE concentration to reach a performance close to the CP-LbL membranes. The membranes exhibit excellent pressure, pH (3-12), and salt (60 g L-1) stability. This work provides an insight for the construction of low fouling and high-performance membranes for the fractionation of dye and salt based on the LbL self-assembly sequence.

eDNA Adsorption onto Microplastics: Impacts of Water Chemistry and Polymer Physiochemical Properties

Adsorption of biomacromolecules onto polymer surfaces, including microplastics (MPs), occurs in multiple environmental compartments, forming an ecocorona. Environmental DNA (eDNA), genetic material shed from organisms, can adsorb onto MPs which can potentially either (1) promote long-range transport of antibiotic resistant genes or (2) serve to gain insights into the transport pathways and origins of MPs by analyzing DNA sequences on MPs. However, little is known about the capacity of MPs to adsorb eDNA or the factors that influence sorption, such as polymer and water chemistries. Here we investigated the adsorption of extracellular linear DNA onto a variety of model MP fragments composed of three of the most environmentally prevalent polymers (polyethylene, polyethylene terephthalate, and polystyrene) in their pristine and photochemically weathered states. Batch adsorption experiments in a variety of water chemistries were complemented with nonlinear modeling to quantify the rate and extent of eDNA sorption. Ionic strength was shown to strongly impact DNA adsorption by reducing or inhibiting electrostatic repulsion. Polyethylene terephthalate exhibited the highest adsorption capacity when normalizing for MP specific surface area, likely due to the presence of ester groups. Kinetics experiments showed fast adsorption (majority adsorbed under 30 min) before eventually reaching equilibrium after 1-2 h. Overall, we demonstrated that DNA quickly binds to MPs, with pseudo-first- and -second-order models describing adsorption kinetics and the Freundlich model describing adsorption isotherms most accurately. These insights into DNA sorption onto MPs show that there is potential for MPs to act as vectors for genetic material of interest, especially considering that particle-bound DNA typically persists longer in the environment than dissolved DNA.

The Potential of Chitosan-Based Composites for Adsorption of Diarrheic Shellfish Toxins

Okadaic acid (OA) is one of the most potent marine biotoxins, causing diarrheal shellfish poisoning (DSP). The proliferation of microalgae that produce OA and its analogues is frequent, threatening human health and socioeconomic development. Several methods have been tested to remove this biotoxin from aquatic systems, yet none has proven enough efficacy to solve the problem. In this work, we synthesized and characterized low-cost composites and tested their efficacy for OA adsorption in saltwater. For the synthesis of the composites, the following starting materials were considered: chitosan of low and medium molecular weight (CH-LW and CH-MW, respectively), activated carbon (AC), and montmorillonite (MMT). Characterization by vibrational spectroscopy (FTIR), X-ray diffraction (XRD), and microscopy revealed differences in the mode of interaction of CH-LW and CH-MW with AC and MMT, suggesting that the interaction of CH-MW with MMT has mainly occurred on the surface of the clay particles and no sufficient intercalation of CH-MW into the MMT interlayers took place. Among the composites tested (CH-LW/AC, CH-MW/AC, CH-MW/AC/MMT, and CH-MW/MMT), CH-MW/MMT was the one that revealed lower OA adsorption efficiency, given the findings evidenced by the structural characterization. On the contrary, the CH-MW/AC composite revealed the highest average percentage of OA adsorption (53 ± 11%). Although preliminary, the results obtained in this work open up good perspectives for the use of this type of composite material as an adsorbent in the removal of OA from marine environments.

Rapid adsorption of benzotriazole onto oxidized carbon cloth as an easily separable adsorbent

A commercial carbon cloth (CC) was oxidized by HNO3 acid and the features of the plain and oxidized CC were evaluated. The results of characterization illustrated that HNO3 oxidization duplicated the oxygen-containing functional groups and the surface area of the CC. The adsorption performance of the plain and oxidized CC (Oxi-CC) toward benzotriazole (BTR) was compared. The results disclosed that the uptake of BTR by oxidized CC was greater than the plain CC. Thence, the affinity of oxidized CC toward BTR was assessed at different conditions. It was found that the adsorption was quick, occurred at pH 9 and improved by adding NaCl or CaCl2 to the BTR solution. The kinetic and isotherm studies revealed that the surface of Oxi-CC is heterogeneous and the adsorption of BTR follows a physical process and forms multilayer over the Oxi-CC surface. The regenerability and reusability study illustrated that only deionized water can completely regenerate the Oxi-CC and that the Oxi-CC can be reused for five cycles without any loss of performance. The high maximum adsorption capacity of Dubinin-Radushkevich isotherm model (252 mg/g), ease of separation and regeneration, and maintaining the adsorption capacity for several cycles revealed the high efficiency and economical and environmental feasibility of Oxi-CC as an adsorbent for BTR.

Calcium Ion-Induced Structural Changes in Carboxymethylcellulose Solutions and Their Effects on Adsorption on Cellulose Surfaces

The adsorption of carboxymethylcellulose (CMC) on cellulose surfaces is one of the most studied examples of the adsorption of an anionic polyelectrolyte on a like-charged surface. It has been suggested that divalent ions can act as a bridge between CMC chains and the surface of cellulose and enhance the CMC adsorption: they can, however, also alter the structure of CMCs in the solution. In previous investigations, the influence of cations on solution properties has been largely overlooked. This study investigates the effect of Ca²⁺ ions on the properties of CMC solutions as well as the influence on cellulose nanofibers (CNFs), which was studied by dynamic light scattering and correlated with the adsorption of CMC on a cellulose surface probed using QCM-D. The presence of Ca²⁺ facilitated the multichain association of CMC chains and increased the hydrodynamic diameter. This suggests that the adsorption of CMCs at high concentrations of CaCl₂ is governed mainly by changes in solution properties rather than by changes in the cellulose surface. Furthermore, an entropy-driven mechanism has been suggested for the adsorption of CMC on cellulose. By comparing the adsorption of CMC from H₂O and D₂O, it was found that the release of water from the cellulose surface is driving the adsorption of CMC.

Fundamental aspects of the non-covalent modification of cellulose via polymer adsorption

The increasing need for new material applications based on cellulose demands increased functional diversity and thus new functionalisation/modification approaches. The non-covalent modification of cellulose fibres via the adsorption of functional polymers has emerged as a promising route for tailoring the properties of material. This review focuses on fundamental aspects of polymer adsorption on cellulose surfaces, where the adsorption of polyelectrolytes and non-polyelectrolytes are treated separately. Adsorption studies on model surfaces as well as cellulose macro-fibres are reviewed. A correlation of the adsorption findings with the Scheutjens-Fleer polymer adsorption theory is provided, allowing the fundamentals behind the polymer adsorption phenomenon and its context in utilization of cellulose fibres to be understood.

Nonelectrostatic Adsorption of Polyelectrolytes and Mediated Interactions between Solid Surfaces

Polymer-mediated interaction between two solid surfaces is directly connected to the properties of the adsorbed polymer layers. Nonelectrostatic interactions with a surface can significantly impact the adsorption of polyelectrolytes to charged surfaces. We use a classical density functional theory to study the effect of various polyelectrolyte solution properties on the adsorption and interaction between two like-charged surfaces. Our results show that nonelectrostatic interactions not only enhance polyelectrolyte adsorption but can also result in qualitatively different salt effects with respect to the adsorbed amount. In particular, we observe decreasing, increasing, and a previously unreported nonmonotonic behavior in the adsorbed amount of polymer with added salt under the conditions studied, although the nonmonotonic regime only occurs for a narrow range in the parameter space. With sufficient nonelectrostatic adsorption, the adsorbed polymer layers produce a long-range repulsive barrier that is strong enough to overcome dispersive interactions that cause surfaces to attract. Concurrently, a short-range bridging attraction is observed when the two polyelectrolyte layers span both the surfaces. Both the repulsive barrier and bridging attraction depend on the charge density of the polymer backbone and the bulk salt concentration but not on the chain length in the semidilute regime studied.

Bulk Phase Behavior vs Interface Adsorption: Specific Multivalent Cation and Anion Effects on BSA Interactions

Proteins are ubiquitous and play a critical role in many areas from living organisms to protein microchips. In humans, serum albumin has a prominent role in the foreign body response since it is the first protein which will interact with, e.g., an implant or stent. In this study, we focused on the influence of salts (i.e., different cations (Y³⁺, La³⁺) and anions (Cl^-, I^-) on bovine serum albumin (BSA) in terms of its bulk behavior as well as the role of charges for protein adsorption at the solid-liquid interface in order to understand and control the underlying molecular mechanisms and interactions. This is part of our group's effort to gain a deeper understanding of protein-protein and protein-surface interactions in the presence of multivalent ions. In the bulk, we established two new phase diagrams and found not only multivalent cation-triggered phase transitions, but also a dependence of the protein behavior on the type of anion. The attractive interactions between proteins were observed to increase from Cl^- < NO₃^- < I^-, resulting in iodide preventing re-entrant condensation and promoting liquid-liquid phase separation in bulk. Using ellipsometry and a quartz-crystal microbalance with dissipation (QCM-D), we obtained insight into the growth of the protein adsorption layer. Importantly, we found that phase transitions at the substrate can be triggered by certain interface properties, whether they exist in the bulk solution or not. Through the use of a hydrophilic, negatively charged surface (native silica), the direct binding of anions to the interface was prevented. Interestingly, this led to re-entrant adsorption even in the absence of re-entrant condensation in bulk. However, the overall amount of adsorbed protein was enhanced through stronger attractive protein-protein interactions in the presence of iodide salts. These findings illustrate how carefully chosen surface properties and salts can directly steer the binding of anions and cations, which guide protein behavior, thus paving the way for specific/triggered protein-protein, protein-salt, and protein-surface interactions.

Direct Measurements of the Forces between Silver and Mica in Humic Substance-Rich Solutions

Deposition of engineered nanoparticles onto porous media from flowing suspensions is important for soil and groundwater quality. The deposition mechanism is controlled by interaction forces between particles and collectors. We investigated the origin and magnitude of opposing forces between silver and mica surfaces (representing nanosilver and sand grains) in solutions relevant to agricultural soils with direct measurements using a surface force apparatus. Solutions of variable NaNO₃, Ca(NO₃)₂, and humic acid (HA) concentrations were used to differentiate individual contributing forces and quantify surface properties. The measured Hamaker constant for silver-water-mica was consistent with Lifshitz theory. Our results indicate that HA forms an adsorbed surface layer, but its charge, thicknesses, compressibility, and mass are significantly larger on mica than silver. Ca²⁺ primarily reduced the differences between the initially adsorbed HA layer properties on each surface, making them more similar. Force-distance profiles indicate that, when silver-mica systems were exposed to HA, osmotic-steric, electrostatic, and van der Waals forces dominate. Soft particle theory was deemed inappropriate for this system. Derjaguin's approximation was utilized to translate force measurements into interaction energy between nanosilver particles and mica collectors. We propose attachment efficiency estimates from measured surface properties, which suggest high particle mobility when nanosilver is applied to HA-rich agricultural soils with modest ionic strength.

Spatial localization of charged molecules by salt ions in oil-confined water microdroplets

Cells contain more than 100 mM salt ions that are typically confined to dimensions of 5 to 10 micrometers by a hydrophobic cellular membrane. We found that in aqueous microdroplets having the same size as cells and that are confined in hydrocarbon oil, negatively charged molecules were distributed rather uniformly over the interior of the microdroplet, whereas positively charged molecules were localized at and near the surface. However, the addition of salt (NaCl) to the microdroplet caused all charged molecules to be localized near the oil-water interface. This salt-induced relocalization required less salt concentration in microdroplets compared to bulk water. Moreover, the localization became more prominent as the size of the microdroplet was reduced. The relocatization also critically depended on the type of oil. Our results imply that salt ions and different hydrophobic interfaces together may govern the local distribution of charged biomolecules in confined intracellular environments.

Like-charge polymer-membrane complexation mediated by multivalent cations: One-loop-dressed strong coupling theory

We probe the electrostatic mechanism driving adsorption of polyelectrolytes onto like-charged membranes upon the addition of tri- and tetravalent counterions to a bathing monovalent salt solution. We develop a one-loop-dressed strong coupling theory that treats the monovalent salt at the electrostatic one-loop level and the multivalent counterions within a strong-coupling approach. It is shown that the adhesive force of the multivalent counterions mediating the like-charge adsorption arises from their strong condensation at the charged membrane. The resulting interfacial counterion excess locally maximizes the screening ability of the electrolyte and minimizes the electrostatic polymer grand potential. This translates into an attractive force that pulls the polymer to the similarly charged membrane. We show that the high counterion valency enables this adsorption transition even at weakly charged membranes. Additionally, strongly charged membranes give rise to monovalent counterion-induced correlations and intensify the interfacial multivalent counterion condensation, strengthening the complexation of the polymer with the like-charged membrane, as well as triggering the orientational transition of the molecule prior to its adsorption. Finally, our theory provides two additional key features as evidenced by previous adsorption experiments: first, the critical counterion concentration for polymer adsorption decreases with the rise of the counterion valency and, second, the addition of monovalent salt enhances the screening of the membrane charges and suppresses monovalent counterion correlations close to the surface. This weakens the interfacial multivalent counterion condensation and results in the desorption of the polymer from the substrate.

Orientational transition and complexation of DNA with anionic membranes: Weak and intermediate electrostatic coupling

We characterize the role of charge correlations in the adsorption of a short, rodlike anionic polyelectrolyte onto a similarly charged membrane. Our theory reveals two different mechanisms driving the like-charge polyelectrolyte-membrane complexation: In weakly charged membranes, repulsive polyelectrolyte-membrane interactions lead to the interfacial depletion and a parallel orientation of the polyelectrolyte with respect to the membrane; while in the intermediate membrane charge regime, the interfacial counterion excess gives rise to an attractive "salt-induced" image force. This furthermore results in an orientational transition from a parallel to a perpendicular configuration and a subsequent short-ranged like-charge adsorption of the polyelectrolyte to the substrate. A further increase of the membrane charge engenders a charge inversion, originating from surface-induced ionic correlations, that act as a separate mechanism capable of triggering the like-charge polyelectrolyte-membrane complexation over an extended distance interval from the membrane surface. The emerging picture of this complexation phenomenon identifies the interfacial "salt-induced" image forces as a powerful control mechanism in polyelectrolyte-membrane complexation.

Interaction of DNA with likely-charged lipid monolayers: An experimental study

Anionic lipids are increasingly being used in lipoplexes for synthetic gene vectors as an alternative to cationic lipids. This is primarily due to their lower toxicity, which makes them biocompatible and adaptable to be tissue specific. However, anionic lipoplexes require the presence of multivalent cations to promote the electrostatic attraction between DNA and anionic lipid mono- and bilayers. In this work we provide for the first time experimental results of the adsorption of linear DNA onto anionic/zwitterionic lipid monolayers without any addition of cations. This is demonstrated experimentally by means of Langmuir monolayers of DOPE/DOPG (1:1) lipids spread on a water subphase that contains calf thymus DNA. The adsorption of DNA onto anionic/zwitterionic lipid monolayers is discussed in terms of the surface pressure-molecular area isotherms recorded in the absence and in the presence of different electrolytes. Measurements of the surface potential provide additional evidence of the different interaction of DNA anionic/zwitterionic lipid monolayers depending on the presence and nature of electrolyte. These experimental results are further analysed in terms of the overall dipole moment normal to the monolayers providing new insight into the behaviour of anionic lipoplexes and the role of zwitterionic lipids.

Rapid Desorption of Polyelectrolytes from Solid Surfaces Induced by Changes of Aqueous Chemistry

The short-term desorption induced by changes of aqueous chemistry of predeposited polyelectrolyte layers on solid surfaces was studied with reflectometry. The behavior of a strong polycation, polydiallydimethylammonium chloride (PDADMAC), interacting with flat silica was investigated in detail. Results showed that partial desorption of preadsorbed polymer chains can be quickly triggered by changes in ionic strength and pH. When lowering these parameters in the PDADMAC-silica system, the increased lateral repulsive potential of neighboring chains drove the desorption of some of the polymer. Furthermore, layer desorption was favored when electrostatic interactions between a polyelectrolyte and the underlying surface became less attractive or switched to being repulsive. At the investigated timescales (<1 h), adlayer desorption was always partial and often incomplete. When initiating desorption from a condition of large adsorbed mass, desorption effects did not result in the plateau mass obtained by adsorption on a clean surface: an excess mass remained deposited. The results thus suggest that a relatively large energy barrier needs to be overcome to induce redissolution of predeposited chains and that this barrier may be a function of the number of polymer-surface interactions, which are in turn correlated with polymer molecular mass. These mechanisms have important implications for environmental processes and colloidal systems because they imply that, once adsorbed, polymeric chains may be redissolved but only to a limited degree at typical engineering timescales.

Effect of Ionic Compounds of Different Valences on the Stability of Titanium Oxide Colloids

Titanium oxide particles of various morphologies have been prepared for applications of scientific or industrial interest in recent decades. Besides development of novel synthetic routes and solid-state characterization of the obtained particles, colloidal stability of titanium oxide dispersions was the focus of numerous research groups due to the high importance of this topic in applications in heterogeneous systems. The influence of dissolved ionic compounds, including monovalent salts, multivalent ions and polyelectrolytes, on the charging and aggregation behaviour of titanium oxide materials of spherical and elongated structures will be discussed in the present review.

Charged Surface Regulates the Molecular Interactions of Electrostatically Repulsive Peptides by Inducing Oriented Alignment

Regulation of molecular orientation of charged dipeptides and involved interactions by electrostatic repulsion from like-charged surfaces were studied using all-atom molecular dynamics simulations. It was found that a charged surface can induce oriented alignment of like-charged peptides, and the oriented alignment leads to enhanced electrostatic repulsion between the peptide molecules. The findings are consistent with previous experimental results about the inhibition of charged protein aggregation using like-charged ion-exchange resin. Furthermore, the simulations provided molecular insights into this process, and demonstrated the distinct regulation effect of like-charged surfaces on the molecular interactions between peptides that possess an electric dipole structure. Both the charged surface and the electric dipole structure of peptides were confirmed to be crucial for the regulation. The research is expected to facilitate the rational design of surfaces or devices to regulate the behavior of amphoteric molecules such as proteins for both in vivo and in vitro applications, which would contribute to the regulation of protein-protein interactions and its application in life science and biotechnology.

Phase Separation of C9orf72 Dipeptide Repeats Perturbs Stress Granule Dynamics

Liquid-liquid phase separation (LLPS) of RNA-binding proteins plays an important role in the formation of multiple membrane-less organelles involved in RNA metabolism, including stress granules. Defects in stress granule homeostasis constitute a cornerstone of ALS/FTLD pathogenesis. Polar residues (tyrosine and glutamine) have been previously demonstrated to be critical for phase separation of ALS-linked stress granule proteins. We now identify an active role for arginine-rich domains in these phase separations. Moreover, arginine-rich dipeptide repeats (DPRs) derived from C9orf72 hexanucleotide repeat expansions similarly undergo LLPS and induce phase separation of a large set of proteins involved in RNA and stress granule metabolism. Expression of arginine-rich DPRs in cells induced spontaneous stress granule assembly that required both eIF2α phosphorylation and G3BP. Together with recent reports showing that DPRs affect nucleocytoplasmic transport, our results point to an important role for arginine-rich DPRs in the pathogenesis of C9orf72 ALS/FTLD.

•

Arginine-rich peptides undergo LLPS dependent on counterions or polyaromates

•

Toxic arginine-rich DPRs perturb stress granule dynamics and protein content

•

PR-induced stress granule formation is dependent on eIF2α phosphorylation and G3BP

•

PR promotes aggregation of ALS-related proteins containing prion-like domains

Atomic force microscopy as a tool to study the adsorption of DNA onto lipid interfaces

The Atomic Force Microscopy (AFM) technique appears as a central tool for the characterization of DNA adsorption onto lipid interfaces. Regardless of the huge number of surveys devoted to this issue, there are still fascinating phenomena in this field that have not been explored in detail by AFM. For instance, adsorption of DNA onto like-charged lipid surfaces mediated by cations is still not fully understood even though it is gaining popularity nowadays in gene therapy and nanotechnology. Studies related to the complexation of DNA with anionic lipids as a non-viral gene delivery vehicle as well as the formation of self-assembled nanoscale DNA constructs (DNA origami) are two of the most attractive systems. Unfortunately, molecular mechanisms underlying the adsorption of DNA onto anionic lipid interfaces remain unclear so far. In view of that, AFM becomes an appropriate technique to provide valuable information to understand the adsorption of DNA to anionic lipid surfaces. As a second part of this review we provide an illustrative example of application of the AFM technique to probe the DNA adsorption onto a model lipid monolayer negatively charged. Microsc. Res. Tech. 80:11-17, 2017. © 2016 Wiley Periodicals, Inc.

Effect of Ionic Correlations on the Surface Forces in Thin Liquid Films: Influence of Multivalent Coions and Extended Theory

Experimental data for the disjoining pressure of foam films stabilized by anionic surfactant in the presence of 1:1, 1:2, 1:3, and 2:2 electrolytes: NaCl, Na₂SO₄, Na₃Citrate, and MgSO₄ are reported. The disjoining pressure predicted by the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory coincides with the experimental data in the case of a 1:1 electrolyte, but it is considerably greater than the measured pressure in all other cases. The theory is extended to account for the effects of ionic correlations and finite ionic radii. Original analytical expressions are derived for the local activity coefficient, electrostatic disjoining pressure, and asymptotic screening parameter. With the same parameter of counterion binding as for a 1:1 electrolyte, the curves predicted by the extended theory are in perfect agreement with the experimental data for 1:2 and 1:3 electrolytes. In comparison with the DLVO theory, the effect of ionic correlations leads to more effective screening of electrostatic interactions, and lower electric potential and counterion concentrations in the film’s midplane, resulting in lower disjoining pressure, as experimentally observed. The developed theory is applicable to both multivalent coions and multivalent counterions. Its application could remove some discrepancies between theory and experiment observed in studies with liquid films from electrolyte solutions.

Complexation and coacervation of like-charged polyelectrolytes inspired by mussels

It is well known that polyelectrolyte complexes and coacervates can form on mixing oppositely charged polyelectrolytes in aqueous solutions, due to mainly electrostatic attraction between the oppositely charged polymers. Here, we report the first (to the best of our knowledge) complexation and coacervation of two positively charged polyelectrolytes, which provides a new paradigm for engineering strong, self-healing interactions between polyelectrolytes underwater and a new marine mussel-inspired underwater adhesion mechanism. Unlike the conventional complex coacervate, the like-charged coacervate is aggregated by strong short-range cation-π interactions by overcoming repulsive electrostatic interactions. The resultant phase of the like-charged coacervate comprises a thin and fragile polyelectrolyte framework and round and regular pores, implying a strong electrostatic correlation among the polyelectrolyte frameworks. The like-charged coacervate possesses a very low interfacial tension, which enables this highly positively charged coacervate to be applied to capture, carry, or encapsulate anionic biomolecules and particles with a broad range of applications.

Adsorbed Mass of Polymers on Self-Assembled Monolayers: Effect of Surface Chemistry and Polymer Charge

The adsorbed mass of polymers on surfaces with different chemistry is presented, and the related adsorption mechanism is discussed. Strong and weak polyelectrolytes of negative and positive charge are studied, as well as an uncharged polymer. Self-assembled monolayers of alkanethiols on gold are used in reflectometry and quartz crystal microbalance (QCM-D) experiments as adsorbing substrates bearing different terminal moieties, namely, methyl, hydroxyl, carboxyl, and amine groups. The various polymer-surface combinations allow the systematic investigation of the role of surface chemistry and polymer charge on adsorbed amount. Interactions of different nature and range drive polymer adsorption: the measured adsorbed amounts reveal information about their relative contribution. When electrostatic chain-surface attraction is present, the largest adsorbed masses are observed. However, significant mass is measured even when an electrostatic barrier to adsorption is present, suggesting the importance of forces of nonelectrostatic origin, which include both hydrophobic interactions and specific forces acting at short distances. This mechanism results in large adsorbed amounts for the adsorption of weak polyelectrolytes, and it is apparent especially in the adsorption behavior of a neutral polymer.