Sulfur-Vacancy-Engineered Two-Dimensional Cu@SnS2-x Nanosheets Constructed via Heterovalent Substitution for High-Efficiency Piezocatalytic Tumor Therapy

Ultrasound (US)-mediated piezocatalytic tumor therapy has attracted much attention due to its notable tissue-penetration capabilities, noninvasiveness, and low oxygen dependency. Nevertheless, the efficiency of piezocatalytic therapy is limited due to an inadequate piezoelectric response, low separation of electron-hole (e--h+) pairs, and complex tumor microenvironment (TME). Herein, an ultrathin two-dimensional (2D) sulfur-vacancy-engineered (Sv-engineered) Cu@SnS2-x nanosheet (NS) with an enhanced piezoelectric effect was constructed via the heterovalent substitution strategy of Sn4+ by Cu2+. The introduction of Cu2+ ion not only causes changes in the crystal structure to increase polarization but also generates rich Sv to decrease band gap from 2.16 to 1.62 eV and inhibit e--h+ pairs recombination, collectively leading to the highly efficient generation of reactive oxygen species under US irradiation. Moreover, Cu@SnS2-x shows US-enhanced TME-responsive Fenton-like catalytic activity and glutathione depletion ability, further aggravating the oxidative stress. Both in vitro and in vivo results prove that the Sv-engineered Cu@SnS2-x NSs can significantly kill tumor cells and achieve high-efficiency piezocatalytic tumor therapy in a biocompatible manner. Overall, this study provides a new avenue for sonocatalytic therapy and broadens the application of 2D piezoelectric materials.

Graphene quantum dots (GQD) and edge-functionalized GQDs as hole transport materials in perovskite solar cells for producing renewable energy: a DFT and TD-DFT study

This study investigated the potential suitability of graphene quantum dots (GQD) and certain edge-functionalized GQDs (GQD-3Xs) as hole transport materials (HTMs) in perovskite solar cells (PSCs). The criteria for appropriate HTMs were evaluated, including solubility, hole mobility, light harvesting efficiency (LHE), exciton binding energy (Eb), hole reorganization energy (λh), hole mobility, and HTM performance. It was found that several of the compounds had higher hole mobility than Spiro-OMeTAD, a commonly used HTM in PSCs. The open circuit voltage and fill factor of the suitable GQD and GQD-3Xs were found to be within appropriate ranges for HTM performance in MAPbI3 PSCs. GQD-COOH and GQD-COOCH3 were identified as the most suitable HTMs due to their high solubility, small λh, and appropriate performance.

Computational Investigation of Interactions between Carbon Nitride Dots and Doxorubicin

The study of carbon dots is one of the frontiers of materials science due to their great structural and chemical complexity. These issues have slowed down the production of solid models that are able to describe the chemical and physical features of carbon dots. Recently, several studies have started to resolve this challenge by producing the first structural-based interpretation of several kinds of carbon dots, such as graphene and polymeric ones. Furthermore, carbon nitride dot models established their structures as being formed by heptazine and oxidized graphene layers. These advancements allowed us to study their interaction with key bioactive molecules, producing the first computational studies on this matter. In this work, we modelled the structures of carbon nitride dots and their interaction with an anticancer molecule (Doxorubicin) using semi-empirical methods, evaluating both geometrical and energetic parameters.

Efficient photo-assisted Fenton-like reaction of yolk-shell CuSe(Cu2Se)/g-C3N4 heterojunctions for methylene blue degradation

Herein, a CuSe(Cu₂Se) yolk-shell structure (CC) was synthesized when room temperature was 25 degree Celsius using Cu₂O as a soft template, and the g-C₃N₄/CuSe(Cu₂Se) heterojunction (CC-G) was formed by coupling appropriate amounts of g-C₃N₄ in the selenization process to provide a novel, green, economical, and efficient photo-Fenton catalytic material. Photo-Fenton degradation experiments proved that in the presence of hydrogen peroxide (H₂O₂), a small amount of g-C₃N₄ hybridization on Cu-based Fenton catalysts significantly improved methylene blue (MB) degradation. The suitable amount of g-C₃N₄ hybridization was selected according to the degradation efficiency. The mass of g-C₃N₄ constituted 20% of the mass of the Cu₂O soft template. The composite material prepared using this combination (CC-G-20) exhibited the best MB degradation performance. The MB degradation efficiency in the CC-G-20/H₂O₂/visible light system was almost 98.3% after 60 min, which is higher than those of the parent materials (g-C₃N₄, 12.7%; CC, 58.6%) and had cyclic stability. The catalytic system can also stably degrade MB under dark conditions, where the MB degradation was almost 82% after 60 min. The heterojunction prevented excessive electrons and holes (e ^- and h⁺) recombination, stabilizing the reactive active substance of hydroxyl in the photo-Fenton-like catalytic system. Electron paramagnetic resonance and photoluminescence experiments confirmed this inference.

Graphitic carbon nitride-based photocatalysts in the applications of environmental catalysis

Semiconductor photocatalytic technology has shown great prospects in converting solar energy into chemical energy to mitigate energy crisis and solve environmental pollution problems. The key issue is the development of high-efficiency photocatalysts. Various strategies in the state-of-the-art advancements, such as heterostructure construction, heteroatom doping, metal/single atom loading, and defect engineering, have been presented for the graphitic carbon nitride (g-C₃N₄)-based nanocomposite catalysts to design their surface chemical environments and internal electronic structures to make them more suitable for different photocatalytic applications. In this review, nanoarchitecture design, synthesis methods, photochemical properties, potential photocatalytic applications, and related reaction mechanisms of the modified high-efficiency carbon nitride-based photocatalysts were briefly summarized. The superior photocatalytic performance was identified to be associated with the enhanced visible-light response, fast photoinduced electron-hole separation, efficient charge migration, and increased unsaturated active sites. Moreover, the further advance of the visible-light harvesting and solar-to-energy conversions are proposed.

Nitrogen and sulphur doped carbon dot: An excellent biocompatible candidate for in-vitro cancer cell imaging and beyond

Carbon dots (CDs) are an exquisite class of carbon allotrope that is already well nourished for their good biocompatibility, water-solubility, excellent photostability, and magnificent photoluminescence property. Doping strategy with heteroatoms is an efficacious way to modify the physicochemical and optical properties, making the carbon dots an exceedingly potential candidate. This work reports the fabrication and cancer cell imaging application of photoluminescent heteroatom-doped carbon dots by use of cysteine and urea as carbon, nitrogen, and sulphur sources through a straightforward and highly productive hydrothermal procedure. The fabricated luminescent carbon dots are spherical in shape, with an average diameter of 3.5 nm. X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR) characterization revealed key facts about the surface functional groups and chemical compositions of carbon dots. The excitation-dependent photoluminescence (PL) peak appeared at around 445 nm against the excited wavelength of 350 nm. Moreover, under the provided experimental conditions, all the carbon dots are non-toxic and safe. The cytotoxicity and the safety profiles of the carbon dots were found to be in the bearable range under normal in-vitro experimental circumstances. Cellular uptake was observed by the green fluorescence of carbon dots inside cells. Likewise, the carbon dots did not alter the cell viability of the normal glial cell line. Again, when treated with the carbon dots, there was no notable increase of apoptotic cells in the G2/M phase of cell cycle analysis that confirmed the imaging-trackable ability of the carbon dots.

Applications of Fluorescent Carbon Dots as Photocatalysts: A Review

Carbon dots (CDs) have attracted considerable interest from the scientific community due to their exceptional properties, such as high photoluminescence, broadband absorption, low toxicity, water solubility and (photo)chemical stability. As a result, they have been applied in several fields, such as sensing, bioimaging, artificial lighting and catalysis. In particular, CDs may act as sole photocatalysts or as part of photocatalytic nanocomposites. This study aims to provide a comprehensive review on the use of CDs as sole photocatalysts in the areas of hydrogen production via water splitting, photodegradation of organic pollutants and photoreduction and metal removal from wastewaters. Furthermore, key limitations preventing a wider use of CDs as photocatalysts are pointed out. It is our hope that this review will serve as a basis on which researchers may find useful information to develop sustainable methodologies for the synthesis and use of photocatalytic CDs.

Efficient Combination of G-C3 N4 and CDs for Enhanced Photocatalytic Performance: A Review of Synthesis, Strategies, and Applications

Recently, heterogeneous photocatalysts have achieved much interest on account of their great potential applications in resolving many tough energy and environmental troubles around the world through an ecologically sustainable way. Heterogeneous nanocomposites composed of graphitic carbon nitride (g-C₃ N₄ ) and carbon dots (CDs) possess broad spectrum absorption, appropriate electronic band structures, rapid carrier mobility, abundant reserves, excellent chemical stability, and facile synthesis methods, which make them promising composite photocatalysts for suitable applications such as photocatalytic solar fuels production and contaminant decomposition. With the rapid development in photocatalysis by hybridization of g-C₃ N₄ and CDs, a systematic summary and prospection of performance improvement are urgent and meaningful. This review first focuses on various kinds of effectively synthetic methods of composites. Following, the strategies available for enhanced performance, including morphology optimization, spectral absorption improvement, ternary or quaternary composition hybrid, lateral or vertical heterostructures construction, heteroatom doping, and so forth, are fully discussed. Then, the applications mainly in efficient photocatalytic hydrogen generation, photocatalytic carbon dioxide reduction, and organic pollutants degradation are systematically demonstrated. Finally, the remaining issues and prospect of further development are proposed as some kind of guidance for powerful combination of g-C₃ N₄ and CDs with high efficiency to photocatalysis.

Amphiphilicity of Intricate Layered Graphene/g-C3N4 Nanosheets

The hybrid heterostructure of the tri-s-triazine form of graphitic carbon nitride (g-C₃N₄), a stable two-dimensional material, results from intricate layer formation with graphene. In this material, g-C₃N₄, an amphiphilic material, stabilizes Pickering emulsions as an emulsifier and can effectively disperse graphene. Due to the various technological applications of the hybrid nanosheets in an aqueous environment, it is essential to study the interaction of water molecules with graphene and g-C₃N₄ (Gr/g-C₃N₄)-combined heterostructure. Although few studies have been performed signifying the water orientation in the interfacial layer, we find that there is a lack of detailed studies using various dynamical and structural properties of the interfacial water molecules. The interface of the Gr/g-C₃N₄ hybrid structure, one of the rarely found amphiphilic interfaces (on the g-C₃N₃ side), is appropriate for exploring the water affinity due to the availability of heterogeneous interfacial aqueous interactions. We adopted classical molecular dynamics simulations using two models for water molecules to study the structure and dynamics of an aqueous interface. We have correlated the structural properties to dynamics and spectral properties to understand the overall behavior of the amphiphilic interface. Our results branch into two significant hydrogen bond (HB) properties in HB count and HB strength among the water molecules in the different layers. The HB counts in the different layers of water are correlated using the average distance distribution (P_rO4), tetrahedral order parameters, HB donor/acceptor count, and total HBs per water molecule. A conspicuous difference is found in the HB count and related dynamics of the system. The HB lifetime and diffusion coefficient hint at the equivalent strength of HBs in the different layers. All the findings conclude that the amphiphilicity of the Gr/g-C₃N₄ interface can help in understanding various interfacial physical and chemical processes.

Molecular Mechanism for the Self-Supported Synthesis of Graphitic Carbon Nitride from Urea Pyrolysis

Quantum chemical calculations combined with kinetic Monte Carlo simulations are performed to decipher the kinetics for the one-pot synthesis of two-dimensional graphitic carbon nitride (g-C₃N₄) from urea pyrolysis. Two mechanisms are considered, one involving ammelide as the intermediate compound and the other considering cyanuric acid. Different grid growing patterns are investigated, and the size, shape, and density of the grids as well as the number and position of the defects are evaluated. We find that the mechanistic pathway involving ammelide is preferred. Larger g-C₃N₄ grids with lower density are achieved when the rate constant for melon growing is inversely proportional to the number of local reaction sites, while nearly filled smaller grids are obtained in the opposite scenario. Larger defects appear at the grid periphery while smaller holes appear throughout the grid. The synthesis of extended g-C₃N₄ structures is favored if the g-C₃N₄ growing propensity is directly proportional to the number of reaction sites.

In situ preparation of visible-light-driven carbon quantum dots/NaBiO3 hybrid materials for the photoreduction of Cr(VI)

In this study, different carbon quantum dots (CQDs)/NaBiO₃ hybrid materials were synthesized as photocatalysts to effectively utilize visible light for the photocatalytic degradation of contaminants effectively. These hybrid materials exhibit an enhanced photocatalytic reduction of hexavalent chromium (Cr(VI)) in the aqueous medium. Zero-dimensional nanoparticles of CQDs were embedded within the two-dimensional NaBiO₃ nanosheets by the hydrothermal process. Compared with that of the pure NaBiO₃ nanosheets, the photocatalytic performance of the hybrid catalysts was significantly high and 6 wt.% CQDs/NaBiO₃ catalyst exhibited better photocatalytic performance. We performed the first-principles density functional theory calculations to study the interfacial properties of pure NaBiO₃ nanosheets and hybrid photocatalysts, and confirmed the CQDs played an important role in the CQDs/NaBiO₃ composites. The experimental results indicated that the enhanced reduction of Cr(VI) was probably due to the high loading of CQDs (electron acceptor) on NaBiO_3, which made NaBiO₃ nanomaterials to respond in visible light and significantly improved their electron-hole separation efficiency.

Nanocarbon-Enhanced 2D Photoelectrodes: A New Paradigm in Photoelectrochemical Water Splitting

Solar-driven photoelectrochemical (PEC) water splitting systems are highly promising for converting solar energy into clean and sustainable chemical energy. In such PEC systems, an integrated photoelectrode incorporates a light harvester for absorbing solar energy, an interlayer for transporting photogenerated charge carriers, and a co-catalyst for triggering redox reactions. Thus, understanding the correlations between the intrinsic structural properties and functions of the photoelectrodes is crucial. Here we critically examine various 2D layered photoanodes/photocathodes, including graphitic carbon nitrides, transition metal dichalcogenides, layered double hydroxides, layered bismuth oxyhalide nanosheets, and MXenes, combined with advanced nanocarbons (carbon dots, carbon nanotubes, graphene, and graphdiyne) as co-catalysts to assemble integrated photoelectrodes for oxygen evolution/hydrogen evolution reactions. The fundamental principles of PEC water splitting and physicochemical properties of photoelectrodes and the associated catalytic reactions are analyzed. Elaborate strategies for the assembly of 2D photoelectrodes with nanocarbons to enhance the PEC performances are introduced. The mechanisms of interplay of 2D photoelectrodes and nanocarbon co-catalysts are further discussed. The challenges and opportunities in the field are identified to guide future research for maximizing the conversion efficiency of PEC water splitting.

Recent advancements in the applications of carbon nanodots: exploring the rising star of nanotechnology

Nanoparticles possess fascinating properties and applications, and there has been increasing critical consideration of their use. Because carbon is a component with immaterial cytotoxicity and extensive biocompatibility with different components, carbon nanomaterials have a wide scope of potential uses. Carbon nanodots are a type of carbon nanoparticle that is increasingly being researched because of their astounding properties such as extraordinary luminescence, simplicity of amalgamation and surface functionalization, and biocompatibility. Because of these properties, carbon nanodots can be used as material sensors, as indicators in fluorescent tests, and as nanomaterials for biomedical applications. In this review, we report on the ongoing and noteworthy utilization of carbon quantum dots such as bioimaging tests and photocatalytic applications. In addition, the extension and future components of these materials, which can be investigated for new potential applications, are discussed.

Manipulatable Interface Electric Field and Charge Transfer in a 2D/2D Heterojunction Photocatalyst via Oxygen Intercalation

Charge separation is the most important factor in determining the photocatalytic activity of a 2D/2D heterostructure. Despite the exclusive advantages of 2D/2D heterostructure semiconductor systems such as large surface/volume ratios, their use in photocatalysis is limited due to the low efficiency of charge separation and high recombination rates. As a remedy for the weak interlayer binding and low carrier transport efficiency in 2D/2D heterojunctioned semiconductors, we suggested an impurity intercalation method for the 2D/2D interface. PtS2/C3N4, as a prototype heterojunction material, was employed to investigate the effect of anion intercalation on the charge separation efficiency in a 2D/2D system using density functional theory. With oxygen intercalation at the PtS2/C3N4 interface, a reversed and stronger localized dipole moment and a built-in electric field were induced in the vertical direction of the PtS2/C3N4 interface. This theoretical work suggests that the anion intercalation method can be a way to control built-in electric fields and charge separation in designs of 2D/2D heterostructures that have high photocatalytic activity.

A Review on Quantum Dots Modified g-C3N4-Based Photocatalysts with Improved Photocatalytic Activity

In the 21st century, the development of sustainable energy and advanced technologies to cope with energy shortages and environmental pollution has become vital. Semiconductor photocatalysis is a promising technology that can directly convert solar energy to chemical energy and is extensively used for its environmentally-friendly properties. In the field of photocatalysis, graphitic carbon nitride (g-C3N4) has obtained increasing interest due to its unique physicochemical properties. Therefore, numerous researchers have attempted to integrate quantum dots (QDs) with g-C3N4 to optimize the photocatalytic activity. In this review, recent progress in combining g-C3N4 with QDs for synthesizing new photocatalysts was introduced. The methods of QDs/g-C3N4-based photocatalysts synthesis are summarized. Recent studies assessing the application of photocatalytic performance and mechanism of modification of g-C3N4 with carbon quantum dots (CQDs), graphene quantum dots (GQDs), and g-C3N4 QDs are herein discussed. Lastly, challenges and future perspectives of QDs modified g-C3N4-based photocatalysts in photocatalytic applications are discussed. We hope that this review will provide a valuable overview and insight for the promotion of applications of QDs modified g-C3N4 based-photocatalysts.

Nano-MOF@defected film C3N4 Z-scheme composite for visible-light photocatalytic nitrogen fixation

Photocatalytic nitrogen fixation has attracted extensive attention in recent years.

The electrical properties and modulation of g-C3N4/β-As and g-C3N4/β-Sb heterostructures: a first principles study

The electronic properties of the g-C3N4/β-As and g-C3N4/β-Sb heterojunctions are investigated via density functional theory. We find that both heterostructures are indirect band gap semiconductors that, when applied to a photocatalytic device, will suffer from inefficient light emission. Fortunately, the band gap of the two junctions can be adjusted by external biaxial strain. As strain increases from compression to extensive, both compounds undergo a transition from metals, indirect semiconductors to direct semiconductors. Moreover, due to the charge transfer, each junction forms a large built-in electric field, which helps to prevent the recombination of electrons and holes. Our results are expected to widen the potential applications of these heterojunctions in nanodevices.

Carbon nitride nanoplatelet photocatalysts heterostructured with B-doped carbon nanodots for enhanced photodegradation of organic pollutants

Decorating electron-accepting materials on carbon nitride (C₃N₄) is a promising strategy to construct heterostructure catalysts for improved photocatalytic abilities. In this study, B-doped carbon-dots (B-C-dots) decorated C₃N₄ (C₃N₄/B-C-dots) catalysts were fabricated through the surface deposition. The benefits from integration of B-C-dots and C₃N₄ are four folds: (i) increasing surface area; (ii) improving visible light absorption; (iii) promoting the transfer of photoinduced carriers; and (iv) reducing the recombination of photoinduced carriers. The optimum photocatalytic activity of B-C-dots/C₃N₄ for Rhodamine B (Rh B) (or tetracycline hydrochloride (TC)) degradation was about 7.21 (6.56) and 4.80 (4.35) times higher than that of C₃N₄ and C-dots/C₃N₄, respectively, exhibiting both remarkable stability and repeatability. Moreover, enhanced photocatalytic activity of C₃N₄/B-C-dots could also be attributed to the type-II heterojunction formed between C₃N₄ and B-C-dots caused by B doping.

Applications of 2D MXenes in energy conversion and storage systems

This article provides a comprehensive review of MXene materials and their energy-related applications.

Carbon nitrides and metal nanoparticles: from controlled synthesis to design principles for improved photocatalysis

The use of sunlight to drive chemical reactions via photocatalysis is of paramount importance towards a sustainable future. Among several photocatalysts, earth-abundant polymeric carbon nitride (PCN, often wrongly named g-C3N4) has emerged as an attractive candidate due to its ability to absorb light efficiently in the visible and near-infrared ranges, chemical stability, non-toxicity, straightforward synthesis, and versatility as a platform for constructing hybrid materials. Especially, hybrids with metal nanoparticles offer the unique possibility of combining the catalytic, electronic, and optical properties of metal nanoparticles with PCN. Here, we provide a comprehensive overview of PCN materials and their hybrids, emphasizing heterostructures with metal nanoparticles. We focus on recent advances encompassing synthetic strategies, design principles, photocatalytic applications, and charge-transfer mechanisms. We also discuss how the localized surface plasmon resonance (LSPR) effect of some noble metals NPs (e.g. Au, Ag, and Cu), bimetallic compositions, and even non-noble metals NPs (e.g., Bi) synergistically contribute with PCN in light-driven transformations. Finally, we provide a perspective on the field, in which the understanding of the enhancement mechanisms combined with truly controlled synthesis can act as a powerful tool to the establishment of the design principles needed to take the field of photocatalysis with PCN to a new level, where the desired properties and performances can be planned in advance, and the target material synthesized accordingly.

Graphitic Carbon Nitride-Based Heterojunction Photoactive Nanocomposites: Applications and Mechanism Insight

The design of heterojunction with superior performance of light absorption and appropriate conduction band and valence band potentials is a promising approach for the applications in efficient environmental remediation and the solar energy storage. In recent years, many studies have been devoted to the applications of graphitic carbon nitride (g-C₃N₄)-based heterojunction photoactive nanomaterials under visible light irradiation due to its excellent physical, optical, and electrical properties, which inspired us to compile this review. Although many reviews demonstrated about the syntheses and applications of g-C₃N₄ composites, a targeted review on the systematic application and photocatalytic mechanisms of g-C₃N₄-based heterojunction, in which components are in intimate linkage with each other rather than a physical mixture, is still absent. In this review, the applications of g-C₃N₄-based heterojunction photoactive nanomaterials in environmental remediation and solar energy storage, such as photocatalytic treatment of persistent organic pollutants, heavy-metal-ion redox, oxidative decomposition of pathogens, water splitting for H₂ evolution, and CO₂ reduction, are systematically discussed. In addition, some emerging applications, such as solar cells and biosensors, are also introduced. Meanwhile, a comprehensive assessment on the basis of first-principles calculations and the thermodynamics and kinetics of surface catalytic reaction for the electronic structure and photocatalytic properties of g-C₃N₄-based heterojunction are valued by this review. In the end, a brief summary and perspectives in designing practical heterojunction photoactive nanomaterials also showed the bright future of g-C₃N₄-based heterojunction. Altogether, this review systematically complements the information that previous reviews have frequently ignored and points out the future development trends of g-C₃N₄-based heterojunction, which expected to provide important references and right directions for the development and practical applications of g-C₃N₄-based heterojunction photoactive nanomaterials.

A simplistic approach to green future with eco-friendly luminescent carbon dots and their application to fluorescent nano-sensor 'turn-off' probe for selective sensing of copper ions

Zero-dimensional fluorescent nanoparticles having specificity as molecular probe appears to be strategically balanced fluorescent nano-probes. In this work, purified lemon extract and l-arginine have been thermally coupled for the extremely acute detection of Cu²⁺ in aqueous medium. The Cu²⁺ ions may be captured by the amino groups on the surface of the nano-sensor to form cupric ammine complex resulting in quenched fluorescence via an inner filter effect. Our proposed nano-probe is N-doped carbon dots (NCDs) which are efficiently selective as fluorescent chemosensor due to enormous binding affinity towards Cu²⁺ in a wide range of concentration (0.05-300μM) within a few minutes.

A facile hydrothermal synthesis of carbon dots modified g-C3N4 for enhanced photocatalytic H2-evolution performance

A facile strategy to realize the homogeneous and solid modification of carbon dots on the g-C₃N₄ surface.

Electrical and optical behaviors of SiC(GeC)/MoS2 heterostructures: a first principles study

Hybrid structures have attracted a great deal of attention because of their excellent properties, which can open up a way we could not foresee in materials science and device physics.

Influence of functional groups on water splitting in carbon nanodot and graphitic carbon nitride composites: a theoretical mechanism study

Charge transfer and separation mechanism in C–CHO/g-C₃N₄ under light irradiation through a two-step process (Route I) and direct excitation (Route II).

Smart Utilization of Carbon Dots in Semiconductor Photocatalysis

Efficient capture of solar energy will be critical to meeting the energy needs of the future. Semiconductor photocatalysis is expected to make an important contribution in this regard, delivering both energy carriers (especially H₂ ) and valuable chemical feedstocks under direct sunlight. Over the past few years, carbon dots (CDs) have emerged as a promising new class of metal-free photocatalyst, displaying semiconductor-like photoelectric properties and showing excellent performance in a wide variety of photoelectrochemical and photocatalytic applications owing to their ease of synthesis, unique structure, adjustable composition, ease of surface functionalization, outstanding electron-transfer efficiency and tunable light-harvesting range (from deep UV to the near-infrared). Here, recent advances in the rational design of CDs-based photocatalysts are highlighted and their applications in photocatalytic environmental remediation, water splitting into hydrogen, CO₂ reduction, and organic synthesis are discussed.

Insights into enhanced visible-light photocatalytic activity of C60 modified g-C3N4 hybrids: the role of nitrogen

Unsaturated N₂ atoms in the interfaces play a major role in promoting the photocatalytic performance of C₆₀ modified g-C₃N₄ hybrids.