Layer like porous materials with hierarchical structure

Multifunctional Catalysts for Cascade Reactions in Biomass Processing

Multifunctional catalysts have received considerable attention in the cascade reactions of biomass processing. A cascade (or tandem) reaction is realized when multiple reaction steps that require different catalysts are performed in a one-step process. These reactions require bi- or multifunctional catalysts or catalyst mixtures to serve successfully at each reaction step. In this review article, we discuss the major factors of the catalyst design influencing the structure-property relationships, which could differ depending on the catalyst type. The major factors include the amounts and strengths of acidic and basic sites, interactions between those and metal sites, synergetic effects, nanoparticle sizes and morphology, nanostructures, porosity, etc. The catalysts described in this review are based on zeolites, mesoporous solids, MOFs, and enzymes. The importance of continuous cascade processes is also examined.

Zeolite Crystallization Inside Chemically Recyclable Ordered Nanoporous Co3O4 Scaffold: Precise Replication and Accelerated Crystallization

The synthesis of mesoporous zeolites has garnered attention with regard to improving their catalytic and adsorption performances. While the hard-templating method provides opportunities to design precisely controlled hierarchical micro- and mesoporous structures, synthesizing mesoporous zeolites without external precipitation requires significant work. This is mainly due to the absence of usable templates other than carbon with hydrophobic surfaces. Herein, it is demonstrated that the Co3O4 template is valuable in preparing mesoporous silicalite-1 and ZSM-5 with a precisely controlled porous structure through hydrothermal synthesis. Unlike conventional carbon templates, the Co3O4 template is relatively hydrophilic, effective in suppressing external precipitation, and is reusable by dissolving in an acidic solution. The crystallization process also differs from that of the carbon template, as the silicate precipitates on a 3D ordered nanoporous Co3O4 scaffold, followed by crystallization and crystal growth. Furthermore, it is unexpectedly observed that the zeolite crystallization is accelerated in the Co3O4 template. The synthetic approach utilizing nanoporous metal oxides opens new doors for the control of the hierarchical structure of zeolites, as well as for the design of metal oxide-zeolite nanocomposite catalysts, due to the potential extensibility of the combination of metal oxides and zeolites.

Construction of Hierarchical Films via Layer-by-Layer Assembly of Exfoliated Unilamellar Zeolite Nanosheets

Zeolites have been widely applied as versatile catalysts, sorbents, and ion exchangers with unique porous structures showing molecular sieving capability. In these years, it is reported that some layered zeolites can be delaminated into molecularly thin 2-dimensional (2D) nanosheets characterized by inherent porous structures and highly exposed active sites. In the present study, two types of zeolite nanosheets with distinct porous structures with MWW topology (denoted mww) and ferrierite-related structure (denoted bifer) are deposited on a substrate through the solution process via electrostatic self-assembly. Alternate deposition of zeolite nanosheets with polycation under optimized conditions allows the layer-by-layer growth of their multilayer films with a stacking distance of 2-3 nm. Furthermore, various hierarchical structures defined at the unit-cell dimensions can be constructed simply by conducting the deposition of mww and bifer nanosheets in a designed sequence. Adsorption of a dye, Rhodamine B, in these films, is examined to show that adsorption is dependent on constituent zeolite nanosheets and their assembled nanostructures. This work has provided fundamental advancements in the fabrication of artificial zeolite-related hierarchical structures, which may be extended to other zeolite nanosheets, broadening their functionalities, applications, and benefits.

Autocatalytic bifunctional supramolecular hydrogels for osteoporotic bone repair

Conventional bone scaffolds, which are mainly ascribed to highly active osteoclasts and an inflammatory microenvironment with high levels of reactive oxygen species and pro-inflammatory factors, barely satisfy osteoporotic defect repair. Herein, multifunctional self-assembled supramolecular fiber hydrogels (Ce-Aln gel) consisting of alendronate (Aln) and cerium (Ce) ions were constructed for osteoporotic bone defect repair. Based on the reversible interaction and polyvalent cerium ions, the Ce-Aln gel, which was mainly composed of ionic coordination and hydrogen bonds, displayed good injectability and autocatalytic amplification of the antioxidant effect. In vitro studies showed that the Ce-Aln gel effectively maintained the biological function of osteoblasts by regulating redox homeostasis and improved the inflammatory microenvironment to enhance the inhibitory effect on osteoclasts. Ribonucleic acid (RNA) sequencing further revealed significant downregulation of various metabolic pathways, including apoptosis signaling, hypoxia metabolism and tumor necrosis factor-alpha (TNF-α) signaling via the nuclear factor kappa-B pathway after treatment with the Ce-Aln gel. In vivo experiments showed that the clinical drug-based Ce-Aln gel effectively promoted the tissue repair of osteoporotic bone defects by improving inflammation and inhibiting osteoclast formation at the defect. Notably, in vivo systemic osteoporosis was significantly ameliorated, highlighting the strong potential of clinical translation for precise therapy of bone defects.

Randomly Layered Superstructure of In2O3 Truncated Nano-Octahedra and Its High-Pressure Behavior

This study outlines the preparation and characterization of a unique superlattice composed of indium oxide (In2O3) vertex-truncated nano-octahedra, along with an exploration of its response to high-pressure conditions. Transmission electron microscopy and scanning transmission electron microscopy were employed to determine the average circumradius (15.2 nm) of these vertex-truncated building blocks and their planar superstructure. The resilience and response of the superlattice to pressure variations, peaking at 18.01 GPa, were examined using synchrotron-based wide-angle X-ray scattering (WAXS) and small-angle X-ray scattering (SAXS) techniques. The WAXS data revealed no phase transitions, reinforcing the stability of the 2D superlattice composed of random layers in alignment with a p31m planar symmetry as discerned by SAXS. Notably, the SAXS data also unveiled a pressure-induced, irreversible translation of octahedra and ligand interaction occurring within the random layer. Through our examination of these pressure-sensitive behaviors, we identified a distinctive translation model inherent to octahedra and observed modulation of the superlattice cell parameter induced by pressure. This research signifies a noteworthy advancement in deciphering the intricate behaviors of 2D superlattices under a high pressure.

Accelerated Synthesis of Nanolayered MWW Zeolite by Interzeolite Transformation

Hierarchical zeolites can offer substantial benefits over bulk zeolites in catalysis. A drawback towards practical implementation is their lengthy synthesis, often requiring complex organic templates. This work describes an accelerated synthesis of nanolayered MWW zeolite based on the combination of interzeolite transformation (IZT) with a dual-templating strategy. FAU zeolite, hexamethyleneimine (HMI), and cetyltrimethylammonium bromide (CTAB) were respectively employed as Al source and primary zeolite, structure directing agent, and exfoliating agent. This approach allowed to reduce the synthesis of nanolayered MWW to 48 h, which is a considerable advance over the state of the art. Tracking structural, textural, morphological, and chemical properties during crystallization showed that 4-membered-ring (4MR) units derived from the FAU precursor are involved in the faster formation of MWW in comparison to a synthesis procedure from amorphous precursor. CTAB restricts the growth of the zeolite in the c-direction, resulting in nanolayered MWW. Moreover, we show that this approach can speed up the synthesis of nanolayered FER. The merits of nanolayered MWW zeolites are demonstrated in terms of improved catalytic performance in the Diels-Alder cycloaddition of 2,5-dimethylfuran and ethylene to p-xylene compared to bulk reference MWW sample.

Current State and Perspectives of Exfoliated Zeolites

Zeolites are highly efficient industrial catalysts and sorbents with microporous framework structures. Approximately 10% of the frameworks, but eventually all in the long run, have produced both 3D crystals and 2D layers. The latter can be intercalated and expanded like all 2D materials but proved difficult to exfoliate directly into suspensions of monolayers in solution as precursors for unique synthetic opportunities. Successful exfoliations have been reported recently and are overviewed in this perspective article. The discussion highlights 3 primary challenges in this field, namely finding suitable 2D zeolite preparations that exfoliate directly in high yield, proving uniform layer thickness in solution and identifying applications to exploit the unique synthetic capabilities and properties of exfoliated zeolite monolayers. Four zeolites have been confirmed to exfoliate directly into monolayers: 3 with known structures-MWW, MFI, and RWR and one unknown, bifer with a unit cell close to ferrierite. The exfoliation into monolayers is confirmed by the combination of 5-6 characterization techniques including AFM, in situ and in-plane XRD, and microscopies. The promising areas of development are oriented films and membranes, intimately mixed zeolite phases, and hierarchical nanoscale composites with other active species like nanoparticles and clusters that are unfeasible by solid state processes.

Bridging the Gap between Zeolites and Dense Silica Polymorphs: Formation of All-Silica Zeolite with High Framework Density from Natural Layered Silicate Magadiite

A silica zeolite (RWZ-1) with a very high framework density (FD) was synthesized from highly crystalline natural layered silicate magadiite, bridging the gap between the two research areas of zeolites and dense silica polymorphs. Magadiite was topotactically converted into a 3D framework through two-step heat treatment. The resulting structure had a 1D micropore system of channel-like cavities with an FD of 22.1 Si atoms/1000 Å3 . This value is higher than those of all other silica zeolites reported so far, approaching those of silica polymorphs (tridymite (22.6) and α-quartz (26.5)). RWZ-1 is a slight negative thermal expansion material with thermal properties approaching those of dense silica polymorphs. It contributes to the creation of a new field on microporous high-density silica/silicates. Synergistic interactions are expected between the micropores with molecular sieving properties and the dense layer-like building units with different topologies which provide thermal and mechanical stabilities.

Design of Bifunctional Nanocatalysts Based on Zeolites for Biomass Processing

Bifunctional catalysts consisting of metal-containing nanoparticles (NPs) and zeolite supports have received considerable attention due to their excellent catalytic properties in numerous reactions, including direct (biomass is a substrate) and indirect (platform chemical is a substrate) biomass processing. In this short review, we discuss major approaches to the preparation of NPs in zeolites, concentrating on methods that allow for the best interplay (synergy) between metal and acid sites, which is normally achieved for small NPs well-distributed through zeolite. We focus on the modification of zeolites to provide structural integrity and controlled acidity, which can be accomplished by the incorporation of certain metal ions or elements. The other modification avenue is the adjustment of zeolite morphology, including the creation of numerous defects for the NP entrapment and designed hierarchical porosity for improved mass transfer. In this review, we also provide examples of synergy between metal and acid sites and emphasize that without density functional theory calculations, many assumptions about the interactions between active sites remain unvalidated. Finally, we describe the most interesting examples of direct and indirect biomass (waste) processing for the last five years.

Topologically Porous Heterostructures for Photo/Photothermal Catalysis of Clean Energy Conversion

As a straightforward way to fix solar energy, photo/photothermal catalysis with semiconductor provides a promising way to settle the energy shortage and environmental crisis in many fields, especially in clean energy conversion. Topologically porous heterostructures (TPHs), featured with well-defined pores and mainly composed by the derivatives of some precursors with specific morphology, are a major part of hierarchical materials in photo/photothermal catalysis and provide a versatile platform to construct efficient photocatalysts for their enhanced light absorption, accelerated charges transfer, improved stability, and promoted mass transportation. Therefore, a comprehensive and timely review on the advantages and recent applications of the TPHs is of great importance to forecast the potential applications and research trend in the future. This review initially demonstrates the advantages of TPHs in photo/photothermal catalysis. Then the universal classifications and design strategies of TPHs are emphasized. Besides, the applications and mechanisms of photo/photothermal catalysis in hydrogen evolution from water splitting and CO_x hydrogenation over TPHs are carefully reviewed and highlighted. Finally, the challenges and perspectives of TPHs in photo/photothermal catalysis are also critically discussed.

Ultrathin 2D Cerium-Based Metal-Organic Framework Nanosheet That Boosts Selective Oxidation of Inert C(sp3 )H Bond through Multiphoton Excitation

The development of methodologies for inducing and tailoring activities of catalysts is an important issue in various catalysis. The ultrathin 2D monolayer metal-organic framework (MOF) nanosheets with more accessible active sites and faster diffusion obtained by exfoliating 3D layered MOFs are of great potential as heterogeneous catalysts, but the rational design and preparation of 3D layered MOFs remains a grand challenge. Herein, a novel weak electrostatic interaction strategy to construct a 3D layered cerium-bearing MOF by coordinating chlorine-capped cerium nodes and linear photoactive methyl viologen (MV⁺ ) organic linkers is used. Under multiphoton excitation, the MV⁺ ligands and CeCl chromophores are triggered consecutively to form the high activity chlorine radical (Cl^• ) for activation of inert C(sp³ )H bond through a hydrogen atom transfer. Benefiting from framework confinement effects, synergistic effects of two active sites and/or flexibility of the ultrathin framework nanosheets with high surface utilization, the observed activities increase in the order CeCl₃ /MV⁺  < bulk 3D MOF crystals < 2D MOF nanosheets in photocatalysis. This work not only contributes a new strategy to construct 3D layered MOFs and their ultrathin nanosheets but also paves the way to use nanostructured MOFs to handle synergy of multiple molecular catalysts.

Recent Advances in Tetra- (Ti, Sn, Zr, Hf) and Pentavalent (Nb, V, Ta) Metal-Substituted Molecular Sieve Catalysis

Metal substitution of molecular sieve systems is a major driving force in developing novel catalytic processes to meet current demands of green chemistry concepts and to achieve sustainability in the chemical industry and in other aspects of our everyday life. The advantages of metal-substituted molecular sieves include high surface areas, molecular sieving effects, confinement effects, and active site and morphology variability and stability. The present review aims to comprehensively and critically assess recent advances in the area of tetra- (Ti, Sn, Zr, Hf) and pentavalent (V, Nb, Ta) metal-substituted molecular sieves, which are mainly characterized for their Lewis acidic active sites. Metal oxide molecular sieve materials with properties similar to those of zeolites and siliceous molecular sieve systems are also discussed, in addition to relevant studies on metal-organic frameworks (MOFs) and some composite MOF systems. In particular, this review focuses on (i) synthesis aspects determining active site accessibility and local environment; (ii) advances in active site characterization and, importantly, quantification; (iii) selective redox and isomerization reaction applications; and (iv) photoelectrocatalytic applications.

Effect of the Polarity of Solvents on Periodic Precipitation: Formation of Hierarchical Revert Liesegang Patterns

Liesegang pattern (LP) is one example of self-organized periodic precipitation patterns in nonequilibrium systems. Several studies have demonstrated that the LP morphology can track physicochemical environmental conditions (e.g., temperature); however, the polarity effect has not been explored to date. In this study, a copper chromate system is used to reveal the impact of solvent polarity on the evolving LP structure using water/organic solvent mixtures. In the typical case of using water/dimethyl sulfoxide (DMSO) mixtures, two drastic changes in LP morphology with increasing DMSO contents were found: (i) increasing frequency of the original structure and (ii) formation of a hierarchical pattern with the appearance of another, lower-frequency structure. Furthermore, the simulation model operating with a bimodal size distribution, allowing both homogeneous and heterogeneous precipitations showed good agreement with the experimental results. Therefore, this study demonstrated that LP can be tailored by solvent polarity and can be used for designing hierarchical precipitation patterns in a straightforward manner.

Emerging Two-Dimensional-Based Nanostructured Catalysts: Applications in Sustainable Organic Transformations

The extension of green and sustainable materials in the preparation of heterogeneous catalysts for organic transformations has increased over the past few decades. Because of their unique and intriguing physical and chemical properties, two-dimensional (2D) nanostructured materials have attracted widespread attention and have been used in a variety of applications, such as catalysis, electronics, and energy storage. A promising pathway to enhance the performance of 2D nanomaterials is their coupling with other functional materials to form heterogeneous or hybrid structures. Herein, we discuss the use of 2D-based nanostructured catalysts for enhancing organic transformations and highlight selected examples to demonstrate the synthesis, advantages, challenges, efficiency, and reusability of the introduced heterogeneous catalysts for cross-coupling and reduction reactions.

Three-Dimensional Hierarchical Hydrotalcite–Silica Sphere Composites as Catalysts for Baeyer–Villiger Oxidation Reactions Using Hydrogen Peroxide

The development of effective, environmentally friendly catalysts for the Baeyer–Villiger reaction is becoming increasingly important in applied catalysis. In this work, we synthesized a 3D composite consisting of silica spheres coated with Mg/Al hydrotalcite with much better textural properties than its 2D counterparts. In fact, the 3D solid outperformed a 2D-layered hydrotalcite as catalyst in the Baeyer–Villiger reaction of cyclic ketones with H2O2/benzonitrile as oxidant. The 3D catalyst provided excellent conversion and selectivity; it was also readily filtered off the reaction mixture. The proposed reaction mechanism, which involves adsorption of the reactants on the hydrotalcite surface, is consistent with the catalytic activity results.

Nematic suspension of a microporous layered silicate obtained by forceless spontaneous delamination via repulsive osmotic swelling for casting high-barrier all-inorganic films

Exploiting the full potential of layered materials for a broad range of applications requires delamination into functional nanosheets. Delamination via repulsive osmotic swelling is driven by thermodynamics and represents the most gentle route to obtain nematic liquid crystals consisting exclusively of single-layer nanosheets. This mechanism was, however, long limited to very few compounds, including 2:1-type clay minerals, layered titanates, or niobates. Despite the great potential of zeolites and their microporous layered counterparts, nanosheet production is challenging and troublesome, and published procedures implied the use of some shearing forces. Here, we present a scalable, eco-friendly, and utter delamination of the microporous layered silicate ilerite into single-layer nanosheets that extends repulsive delamination to the class of layered zeolites. As the sheet diameter is preserved, nematic suspensions with cofacial nanosheets of ≈9000 aspect ratio are obtained that can be cast into oriented films, e.g., for barrier applications.

Structural Transformation-Involved Synthesis of Nanosized ERI-Type Zeolite and Its Catalytic Property in the MTO Reaction

Nanosized ERI-type aluminophosphate was prepared by the calcination of a precursor material (denoted as ECNU-38P) synthesized using 1,1,6,6-tetramethyl-1,6-diazacyclododecane-1,6-diium hydroxide (TDDH) as a structure-directing agent. The structure of ECNU-38P is related to ERI topology but exhibits a highly disordered manner and contains both four- and six-coordinated Al atoms. In situ XRD patterns revealed a rarely reported temperature-induced three-dimensional (3D)-to-3D structural transformation from ECNU-38P to the ordered ERI-type ECNU-38 zeolite at 573-623 K. Nanosized ERI-type silicoaluminophosphate Si-ECNU-38 was also obtained by introducing Si atoms into the synthetic system of ECNU-38P. The catalytic performance of ERI-type silicoaluminophosphates in the methanol-to-olefin (MTO) reaction was revealed to be highly related to the crystal sizes.

Zeolite nanosheets for catalysis

Zeolites with well-defined micropores have been widely used as heterogeneous catalysts in the fields of petroleum refining, fine chemicals, and environment protection. However, the sole micropores in the zeolite structures usually impose diffusion constraints, which would greatly influence their catalytic performances. Therefore, it is highly desirable to shorten the diffusion pathway of zeolites and thus eliminate the diffusion constraints. One of the efficient methods is to synthesize zeolite nanosheets, which has become a hot topic in the past decades. In this tutorial review, the recent progresses in the synthesis of zeolite nanosheets and their relevant catalysis are briefly discussed. Various strategies for the synthesis of zeolite nanosheets are summarized including delamination, templated crystallization, additive-assisted synthesis, seed-directed synthesis, and gaseous expansion synthesis. In addition, the catalytic reactions of zeolite nanosheets with acidic and metal sites are also outlined. This tutorial review should be significant for the design and preparation of highly efficient zeolite catalysts.

Excellent adsorption performance and capacity of modified layered ITQ-2 zeolites for elemental mercury removal and recycling from flue gas

Adsorption is a superior method for removing and recycling high concentration of mercury from nonferrous metal smelting flue gas, especially adsorbents with good sulfur resistance and large adsorption capacity. In this study, Co and Mn oxide-modified layered ITQ-2 zeolites were designed to capture and recycle elemental mercury (Hg⁰). The physicochemical characteristics of the adsorbents were characterized using BET, XRD, FESEM, TEM, and XPS, and the results showed that Mn/ITQ-2 zeolite has a large specific surface area, and MnO_x was highly dispersed on ITQ-2 zeolite. The Hg⁰ removal efficiency and adsorption capacity of the 5%Mn/ITQ-2 zeolite at 300 °C were 97% and 2.04 mg/g in 600 min, respectively, much higher than those of the previously reported 5%Mn/MCM-22 zeolite. The 2%Co-2%Mn/ITQ-2 zeolite exhibited a higher SO₂ resistance performance. The mechanism of Hg⁰ removal was concluded to be driven by the primary catalytic oxidation of MnO_x, secondary oxidation of active chlorine, and concurrent chemisorption. However, the Hg⁰ adsorption capacity was determined by the specific surface area and pore structure of ITQ-2. The 2%Co-2%Mn/ITQ-2 zeolite exhibited a high SO₂ resistance performance. The Mn/ITQ-2 and Co-Mn/ITQ-2 zeolites have excellent regenerability and reusability, which can realize mercury recycling from flue gas.

On route to one-pot synthesis of delaminated Al-SSZ-70 zeolite via partial substitution of OSDA with CTAOH surfactant

Direct synthesis of delaminated layered zeolitic materials aims to synthesize confined catalysts for reactions involving sterically bulky reactants, which are too large to benefit from conventional three-dimensional confinement in micropores.

OUP accepted manuscript

The rational design synthesis of zeolite catalysts with effective, environmentally benign and atom-economic routes is a major topic in the field of microporous materials, as it would avoid the high labor cost and inefficiency of traditional trial-and-error methods in developing new structures and dispel environmental concerns regarding the industrial mass production of zeolites. Catalytic applications of zeolite materials have expanded from conventional single functionalities, such as solid acids or selective oxidation catalysts to bi/multifunctionalities through combination with metals or metal oxides. This is a response to new requirements from petrochemical and fine chemical industries, such as precise control of product distribution, conversion of low-carbon resources for chemical production, and solutions to increasingly severe environmental problems related to CO₂ and NO_x. Thus, based on the systematic knowledge of zeolite chemistry and science that researchers have acquired in the past half-century and the development requirements, remarkable progress has been made in zeolite synthesis and catalysis in the past 10 years. This includes the manipulation of zeolitic monolayers derived from layered zeolites and germanosilicates to construct novel zeolite materials and effective and green zeolite syntheses as well as the synergistic interaction of zeolites and metal/metal oxides with different space distributions in the conversion of low-carbon resources. With many zeolite catalysts and catalytic processes being developed, our understanding of the close relationship between zeolite synthesis, structure and catalytic properties has deepened. Researchers are gradually approaching the goal of rationally designing zeolite catalysts with precisely controlled activity and selectivity for particular applications.

c-Axis-penetrated mesoporous MWW zeolite nanosheets: preparation by H2O2-induced micro-explosion and their enhanced properties

A series of highly dispersed and c-axis-penetrated mesoporous MWW oligolayers with enhanced properties was prepared via an efficient, green, and controllable method through H2O2-induced micro-explosion.

"Open" Nonporous Nonasil Zeolite Structure for Selective Catalysis

Nonasil (NON-type framework) zeolite, having inner large cages but only 6-ring (R) apertures, is recognized as a nonporous material without practical application values as catalysts or adsorbents. A novel bottom-up structural construction strategy assisted with well-designed Gemini-type surfactant is proposed to "open" the non cages, constructing two novel NON-related structures with accessible and stable acid sites. The obtained derivant (named as ECNU-27) possessed hierarchical porosity with short-range ordered 8-R micropores and abundant intercrystal mesopores, serving as a promising catalyst for the 1-butene cracking to lower alkenes.

Exfoliated Ferrierite-Related Unilamellar Nanosheets in Solution and Their Use for Preparation of Mixed Zeolite Hierarchical Structures

Direct exfoliation of layered zeolites into solutions of monolayers has remained unresolved since the 1990s. Recently, zeolite MCM-56 with the MWW topology (layers denoted mww) has been exfoliated directly in high yield by soft-chemical treatment with tetrabutylammonium hydroxide (TBAOH). This has enabled preparation of zeolite-based hierarchical materials and intimate composites with other active species that are unimaginable via the conventional solid-state routes. The extension to other frameworks, which provides broader benefits, diversified activity, and functionality, is not routine and requires finding suitable synthesis formulations, viz. compositions and conditions, of the layered zeolites themselves. This article reports exfoliation and characterization of layers with ferrierite-related structure, denoted bifer, having rectangular lattice constants like those of the FER and CDO zeolites, and thickness of approximately 2 nm, which is twice that of the so-called fer layer. Several techniques were combined to prove the exfoliation, supported by simulations: AFM; in-plane, in situ, and powder X-ray diffraction; TEM; and SAED. The results confirmed (i) the structure and crystallinity of the layers without unequivocal differentiation between the FER and CDO topologies and (ii) uniform thickness in solution (monodispersity), ruling out significant multilayered particles and other impurities. The bifer layers are zeolitic with Brønsted acid sites, demonstrated catalytic activity in the alkylation of mesitylene with benzyl alcohol, and intralayer pores visible in TEM. The practical benefits are demonstrated by the preparation of unprecedented intimately mixed zeolite composites with the mww, with activity greater than the sum of the components despite high content of inert silica as pillars.

Controlled direct synthesis of single- to multiple-layer MWW zeolite

The minimized diffusion limitation and completely exposed strong acid sites of the ultrathin zeolites make it an industrially important catalyst especially for converting bulky molecules. However, the structure-controlled and large-scale synthesis of the material is still a challenge. In this work, the direct synthesis of the single-layer MWW zeolite was demonstrated by using hexamethyleneimine and amphiphilic organosilane as structure-directing agents. Characterization results confirmed the formation of the single-layer MWW zeolite with high crystallinity and excellent thermal/hydrothermal stability. The formation mechanism was rigorously revealed as the balanced rates between the nucleation/growth of the MWW nanocrystals and the incorporation of the organosilane into the MWW unit cell, which is further supported by the formation of MWW nanosheets with tunable thickness via simply changing synthesis conditions. The commercially available reagents, well-controlled structure and the high catalytic stability for the alkylation of benzene with 1-dodecene make it an industrially important catalyst.

Zn(ferulate)-LSH Systems as Multifunctional Filters

Excessive UV solar radiation exposure causes human health risks; therefore, the study of multifunctional filters is important to skin UV protective ability and also to other beneficial activities to the human organism, such as reduction of reactive oxygen species (ROS) responsible for cellular damages. Potential multifunctional filters were obtained by intercalating of ferulate anions into layered simple metal hydroxides (LSH) through anion exchange and precipitation at constant pH methods. Ultrasound treatment was used in order to investigate the structural changes in LSH-ferulate materials. Structural and spectroscopic analyses show the formation of layered materials composed by a mixture of LSH intercalated with ferulate anions, where carboxylate groups of ferulate species interact with LSH layers. UV-VIS absorption spectra and in vitro SPF measurements indicate that LSH-ferulate systems have UV shielding capacity, mainly UVB protection. The results of reactive species assays show the ability of layered compounds in capture DPPH^•, ABTS^•+, ROO^•, and HOCl/OCl⁻ reactive species. LSH-ferulate materials exhibit antioxidant activity and singular optical properties that enable their use as multifunctional filters.

From Colloidal Dispersions of Zeolite Monolayers to Effective Solid Catalysts in Transformations of Bulky Organic Molecules: Role of Freeze-Drying and Dialysis

We investigated the properties and catalytic activity of zeolites with MWW topology obtained by unprecedented liquid exfoliation of the MCM-56 zeolite into solutions of monolayers and isolation/reassembly of the dispersed layers by various methods, with optional purification by dialysis or ammonium exchange. The layers were recovered by flocculation with alcohol or ammonium nitrate and freeze-drying. Flocculation alone, even with ammonium nitrate, did not ensure removal of residual sodium cations resulting in catalysts with low activity. Dialysis of the solutions with dispersed monolayers proved to be efficient in removing sodium cations and preserving microporosity. The monolayers were also isolated as solids by freeze-drying. The highest BET area and pore volume obtained with the freeze-dried sample confirmed lyophilization efficiency in preserving layer structure. The applied test reaction, Friedel–Crafts alkylation of mesitylene, showed high benzyl alcohol conversion due to increased concentration of accessible acid centers caused by the presence of secondary mesoporosity. The applied treatments did not change the acid strength of the external acid sites, which are the most important ones for converting bulky organic molecules. Zeolite acidity was not degraded in the course of exfoliation into monolayers, showing the potential of such colloid dispersions for the formation of active catalysts.

Engineered two-dimensional nanomaterials: an emerging paradigm for water purification and monitoring

Water scarcity has become an increasingly complex challenge with the growth of the global population, economic expansion, and climate change, highlighting the demand for advanced water treatment technologies that can provide clean water in a scalable, reliable, affordable, and sustainable manner. Recent advancements on 2D nanomaterials (2DM) open a new pathway for addressing the grand challenge of water treatment owing to their unique structures and superior properties. Emerging 2D nanostructures such as graphene, MoS₂, MXene, h-BN, g-C₃N₄, and black phosphorus have demonstrated an unprecedented surface-to-volume ratio, which promises ultralow material use, ultrafast processing time, and ultrahigh treatment efficiency for water cleaning/monitoring. In this review, we provide a state-of-the-art account on engineered 2D nanomaterials and their applications in emerging water technologies, involving separation, adsorption, photocatalysis, and pollutant detection. The fundamental design strategies of 2DM are discussed with emphasis on their physicochemical properties, underlying mechanism and targeted applications in different scenarios. This review concludes with a perspective on the pressing challenges and emerging opportunities in 2DM-enabled wastewater treatment and water-quality monitoring. This review can help to elaborate the structure-processing-property relationship of 2DM, and aims to guide the design of next-generation 2DM systems for the development of selective, multifunctional, programmable, and even intelligent water technologies. The global significance of clean water for future generations sheds new light and much inspiration in this rising field to enhance the efficiency and affordability of water treatment and secure a global water supply in a growing portion of the world.

Single-Crystalline Ultrathin 2D Porous Nanosheets of Chiral Metal-Organic Frameworks

Two-dimensional (2D) materials with highly ordered in-plane nanopores are crucial for numerous applications, but their rational synthesis and local structural characterization remain two grand challenges. We illustrate here that single-crystalline ultrathin 2D MOF nanosheets (MONs) with intrinsic porosity can be prepared by exfoliating layered metal-organic frameworks (MOFs), whose layers are stabilized by sterically bulky groups. As a result, three three-dimensional (3D) isostructural lanthanide MOFs possessing porous layer structures are constructed by coordinating metal ions with an angular dicarboxylate linker derived from chiral 1,1'-biphenyl phosphoric acid with pendant mesityl groups. The Eu-MOF is readily ultrasonic exfoliated into single-crystalline nanosheets with a thickness of ca. 6.0 nm (2 layers) and a lateral size of 1.5 × 3.0 μm². The detailed structural information, i.e., the pore channels and individual organic and inorganic building units in the framework, is clearly visualized by a low-dose high-resolution transmission electron microscopy (HRTEM) technique. Benefiting from their ultrathin feature, the nanosheets are well embedded into the polymer matrix to form free-standing mixed-matrix membranes. In both the solution and membrane phase, the fluorescence of the MONs can be effectively quenched by a total of 17 chiral terpenes and terpenoids through supramolecular interactions with uncoordinated chiral phosphoric acids, leading to a chiral optical sensor for detecting vapor enantiomers, which is among the most challenging molecular recognition tasks.

Combining Soft- and Hard-Templating Approaches in MWW-Type Zeolites

A combination of hard-templating (HT) and soft-templating (ST) approaches was studied to obtain MWW-type materials with intermediate physicochemical properties. The HT methodology involved the introduction of carbon particles as hard templates during gel synthesis to obtain a layered zeolitic precursor (LZP) with particles possessing a microspherical morphology. The LZP obtained was treated with surfactants as soft templates to expand the layers of the LZP, followed by a pillaring procedure. The materials were characterized by X-ray diffraction, transmission and scanning electron microscopy, elemental analysis and N₂ adsorption. The results demonstrate that the obtained material possesses intermediate properties from both approaches, with interparticle mesopores/macropores and pore sizes between 18 and 46 Å. However, the ST procedure causes a partial disruption of some microspheres, forming small crystallite aggregates, and results in a decrease in the number of interparticle mesopores/macropores previously formed by the HT method. All synthesized solids presented catalytic activity, which was evaluated by the cracking of low-density polyethylene (LDPE) as a probe reaction.

Chitosan modified Ti-PILC supported PdOx catalysts for coupling reactions of aryl halides with terminal alkynes

Biopolymer of chitosan (CS) and titanium pillared clays (Ti-PILCs) have been combined in a hybrid as advanced supports for immobilization of PdOx=0,1 species to prepare novel PdOx=0,1@Ti-PILC/CS nano-composite catalysts. The Ti-PILC materials showed high specific surface areas and abundant meso-porous structure with many irregular pore channels caused by collapses of layered structure of clay during Ti pillaring process. Both CS chains and sub-nano sized PdOx particles were successfully incorporated into the pore channels of Ti-PILC, resulting in a decrease in both the specific surface areas and uniform distribution of pore size. Besides conventional methods characterizations, the strong interactions between PdOx species and Ti-PILC/CS support were further evidenced with positron annihilation lifetime spectroscopy studies. The resultant PdOx@Ti-PILC/CS catalyst was highly active for the coupling reactions of aryl halides with phenyl acetylenes. It was recyclable and gave excellent yield up to 13 runs with low leaching of Pd species.

Two-Dimensional Zeolite Materials: Structural and Acidity Properties

Zeolites are generally defined as three-dimensional (3D) crystalline microporous aluminosilicates in which silicon (Si⁴⁺) and aluminum (Al³⁺) are coordinated tetrahedrally with oxygen to form large negative lattices and consequent Brønsted acidity. Two-dimensional (2D) zeolite nanosheets with single-unit-cell or near single-unit-cell thickness (~2-3 nm) represent an emerging type of zeolite material. The extremely thin slices of crystals in 2D zeolites produce high external surface areas (up to 50% of total surface area compared to ~2% in micron-sized 3D zeolite) and expose most of their active sites on external surfaces, enabling beneficial effects for the adsorption and reaction performance for processing bulky molecules. This review summarizes the structural properties of 2D layered precursors and 2D zeolite derivatives, as well as the acidity properties of 2D zeolite derivative structures, especially in connection to their 3D conventional zeolite analogues' structural and compositional properties. The timeline of the synthesis and recognition of 2D zeolites, as well as the structure and composition properties of each 2D zeolite, are discussed initially. The qualitative and quantitative measurements on the acid site type, strength, and accessibility of 2D zeolites are then presented. Future research and development directions to advance understanding of 2D zeolite materials are also discussed.

The catalytic degradation of nitrobenzene by the Cu-Co-Fe-LDH through activated oxygen under ambient conditions

Efficient and low-cost catalysts for catalytic wet air oxidation (CWAO) under ambient conditions are of great significance for the degradation of hydrophobic organic contaminants. In this study, four LDH catalysts were prepared and their catalytic performance was studied by the degradation of nitrobenzene. The CuCoFe-LDH shows the best catalytic activity with an NB removal efficiency of 41.2%. The CuCoFe-LDH exhibited a typical layer structure, with a specific surface area of 167.32 m² g^-1, and Cu²⁺, Co²⁺ and Fe³⁺ were evenly dispersed on the crystal. The NB removal efficiency was increased by 12.5% through adding formic acid. After five recycling processes, the NB removal efficiency was 18.9% because 3.8 mg g^-1 of Co was leached out of the LDH. In the CWAO process, H₂O₂, ˙OH, ˙O₂^- and ¹O₂ were successfully formed through activated oxygen by the CuCoFe-LDH catalyst under ambient conditions. This work further broadens the application scope of layered double hydroxides (LDHs) in the degradation of organic pollutants by CWAO under ambient conditions.