Photoredox Site-Selective C(sp3)-H Alkylation of 1-(o-Iodoaryl)-alkan-1-ones with Activated Alkenes Enabled by Hydrogen Atom Transfer

A visible-light-mediated photoredox catalysis for β-C(sp3)-H alkylation of 1-(o-iodoaryl)alkan-1-ones with alkenes via 1,5-hydrogen atom transfer and alkene alkylarylation to produce diverse β-alkyl arylalkanones containing a quaternary carbon center is presented. This method is applicable to a wide range of 1-(o-iodoaryl)alkan-1-ones and activated alkenes. Mechanistic studies suggest that the reaction involves a radical process.

Efficient selectivity of dual-metal intermediate structure in metal-organic frameworks-based photocatalyst for customized the pathway of CO2 reduction to CO

The capture and utilization of CO2 are critical for protecting the environment and ensuring the sustainable development of society. Given the challenges in separating multiple C1 products (CO, CH4, etc.) with similar reduction potentials, achieving high selectivity for a single reduction product while maintaining high conversion efficiency is essential. In this study, a photocatalyst with NH2-MIL-125-Ti/Cu dual-metal active sites was developed by introducing Cu2+ in situ. The synergistic interaction between oxygen vacancies that capture CO2 and the Cu-Ti dual active sites formed by CuCOTi intermediates preferentially facilitated the generation of CO. As a result, high CO selectivity was achieved during the CO2 photoreduction process. The experimental results indicate that NH2-MIL-125-Ti/Cu5 achieves nearly 100 % selectivity for CO under visible-light irradiation, with a CO2-to-CO conversion rate of 598.2 μmol g-1 h-1, representing a 108.28 % improvement compared to NM. This study provides a novel strategy for designing and synthesizing more efficient and selective photocatalysts.

Photoredox/Sulfide Dual Catalysis for Modular Synthesis of Multi-substituted Furan Rings via Catalytic Indirect Reductive Quenching

The catalytic indirect reductive quenching method is facilitated by a combination of Ir(III) photoredox and sulfide dual-catalysis system. This study demonstrated a method for synthesizing multi-substituted furans by using a photoredox/sulfide dual-catalysis system. This method enables the synthesis of various furan derivatives, including spirofurans and phthalans. The utility of this system was demonstrated through gram-scale synthesis of the pharmaceutical molecule talopram. Mechanistic studies and density functional theory calculations suggested the formation of sulfonium species via sulfide radical cations, followed by intramolecular cyclization to produce the desired furan derivatives.

Non-noble Metal Single-Molecule Photocatalysts for the Overall Photosynthesis of Hydrogen Peroxide

Despite the great progress in molecule photocatalytic solar energy conversion, it is particularly challenging to realize a photocatalytic overall reaction in a non-noble metal complex, which represents a new paradigm for photosynthesis. In this study, a class of novel non-noble metal complexes with head-to-tail geometry were designed and readily synthesized via the coordination of triphenylamine-modified 2,2': 6',2″-terpyridine ligands with Zn2+. As expected, these complexes exhibited the desired through-space charge-transfer transition, generating both long-lived excited states (on the order of microseconds) and separate redox centers under visible-light irradiation. These complexes have particularly low exciton binding energies, which make them excellent heterogeneous single molecular photocatalysts for the overall photosynthetic production of H2O2. Remarkably, a high H2O2 evolution rate (8862 μmol g-1 h-1) was achieved in pure H2O under an air atmosphere via precise molecular tailoring, revealing the unparalleled advantages of molecular photocatalysts in improving the catalytic rate of H2O2 production. This is the first time that single-molecule photocatalysts have been used to efficiently complete the photosynthesis of H2O2. This study presents a new paradigm for photocatalytic energy conversion and provides unique insights into the design of molecular photocatalysts.

Construction of a laccase/CeO2/attapulgite nanocomposite for photoenzymatic catalytic CO2 reduction coupled with biomass oxidation

Herein, a photoenzymatic synergistic catalytic material, i.e. laccase/CeO2/attapulgite, was prepared for simultaneous CO2 conversion and biomass conversion. Based on the synergistic effect of the photoenzyme in the prepared composites, a remarkable CO (27.15 μmol gcat-1 h-1) and CH4 (64.88 μmol gcat-1 h-1) production rate and a benzaldehyde yield of 84.1% were gained.

Engineering Planar Crystallinity in Nitrogen-Vacancy-Incorporated Carbon Nitride for Efficient Photoredox Catalysis

The concurrent evolution of value-added benzimidazole compounds and hydrogen within the domain of chemical synthesis is of paramount importance. The utilization of photocatalysis enhances both the efficiency and environmental benignity of the synthetic process. However, it is profoundly challenging within a photocatalytic system to simultaneously augment the number of active sites and the internal transport rate of photogenerated charge carriers. To address this issue, a template-free, step-by-step assembly strategy has been proposed for the synthesis of planar crystalline carbon nitride (CCN) incorporated with a nitrogen vacancy (Nv). In contrast to the simultaneous assembly method, the sequential assembly process encompasses a progressive crystallization mechanism. This method is conducive to the mitigation of the incidence of structural disarray, thereby precluding the genesis of non-ordered defects throughout the whole bulk phase. The ordered in-plane arrangement facilitates the spatial segregation of electrons and holes, thereby decoupling the redox active sites. This separation minimizes the likelihood of back reactions and suppresses the recombination process, which is advantageous for the efficiency of photocatalytic coupling reactions. Certified by multiscale characterization and theoretical simulations, the incorporation of Nv enhances the energy band structure and provides sites with unsaturated coordination for the adsorption and activation of ethanol molecules. This interfacial synergistic effect of Nv and co-catalyst Pt as the Lewis site achieves efficient activation of both coupling partners. The obtained CCN demonstrates significant bifunctional photocatalytic activity, achieving a yield of benzimidazole at 5.0 mmol g-1 with a conversion and selectivity rate of 99%. Simultaneously, the hydrogen evolution rate of CCN is measured at 9.1 mmol g-1 within 4 h. The template-free, step-by-step assembled strategy utilized in this study provides new perspectives on developing highly efficient photocatalysts at the molecular level.

Photoinduced EDA Complex-Initiated Synthesis of Fluoroalkylated Isoquinolinonediones

A visible-light-induced radical tandem difluoroalkylation/cyclization to construct CF2-containing isoquinolinonedione skeletons with methacryloyl benzamides is developed. Broad substrate scopes are compatible with metal-, oxidant- and photocatalyst-free conditions under room temperature in good-to-excellent yields. Mechanistic analysis revealed that the transformation is initiated by photoinduced electron donor-acceptor (EDA) complexes formation.

Access to Ketones via Nickel-Catalyzed Coupling between S-2-Pyridyl Thioesters and Redox-Active Esters Using an Organic Reductant

A nickel-catalyzed coupling between S-2-pyridyl thioesters and redox-active esters has been reported. Diludine was used as a reductant in this strategy. Our method rapidly achieves the target ketone products in moderate to good yield. The construction of nonanomeric C-acyl glycosides was realized through the approach as well.

Visible Light-Driven Excited-State Copper-BINAP Catalysis for Accessing Diverse Chemical Reactions

The use of visible light to drive chemical transformations has a history spanning over a century. However, the development of photo-redox catalysts to efficiently harness light energy is a more recent advancement, evolving over the past two decades. While ruthenium and iridium-based photocatalysts dominate due to their photostability, long excited-state lifetimes, and high redox potentials, concerns about sustainability and cost have shifted attention to first-row transition metals. Luminescent Cu(I) complexes have emerged as promising alternatives, offering open-shell reactivity and tunable photoelectrochemical properties. This review (i) provides an overview of the structural, photophysical, and electrochemical properties governing copper(I) complexes; (ii) highlights advances in Cu(I)-BINAP catalysis for carbon-carbon and carbon-heteroatom bond formations under mild conditions; and (iii) analyzes the trajectory of this catalytic system, addressing challenges and identifying opportunities for further development.

Di(pyridin-2-yl)amino-substituted 1,10-phenanthrolines and their Ru(II)-Pd(II) dinuclear complexes: synthesis, characterization and application in Cu-free Sonogashira reaction

Dinuclear complexes bearing Ru(II) photoactive centers are of interest for the development of efficient dual catalysts for many photocatalyzed reactions. Ditopic polypyridine ligands, bis(pyridin-2-yl)amino-1,10-phenanthrolines, containing an additional coordination site (bis(pyridin-2-yl)amine, dpa) at positions 3, 4 or 5 of the 1,10-phenanthroline core (Phen-3NPy2, Phen-4NPy2 and Phen-5NPy2) were synthesized. They were used as bridging ligands to obtain dinuclear complexes [(bpy)2Ru(Phen-NPy2)PdCl2](PF6)2 (Ru(Phen-NPy2)Pd) in good yields via stepwise complexation. In these complexes Ru(II) is coordinated to 1,10-phenanthroline, while Pd(II) is bound to the dpa chelating moiety, as established by NMR spectroscopy and X-ray single crystal analysis. The influence of the position of dpa in the phenanthroline ring on the structural, optical and electrochemical properties of Ru(Phen-NPy2)Pd complexes was studied. The complexes exhibit photoluminescence in argon-saturated MeCN solution with maxima in the range of 615-625 nm, with emission quantum yields ranging from 0.11 to 0.15 for Ru(Phen-NPy2) complexes and from 0.018 to 0.026 for dinuclear Ru(Phen-NPy2)Pd complexes. All the complexes absorb visible light in the range of 370-470 nm with high extinction coefficients and can be considered useful as photocatalysts. The Ru2+/3+ potential in Ru(Phen-NPy2)Pd complexes showed no significant dependence on the dpa position, while the Pd2+/0 reduction potential was significantly lower for Ru(Phen-3NPy2)Pd and Ru(Phen-4NPy2)Pd, than for Ru(Phen-5NPy2)Pd (-0.57 V and -0.72 V vs. Ag/AgCl, KCl(sat.), respectively). The complexes were used as photoactivated precatalysts in Cu-free Sonogashira coupling under blue LEDs (12 W) irradiation. The reaction proceeded roughly three times faster when Ru(Phen-4NPy2)Pd and Ru(Phen-3NPy2)Pd were used as catalyst precursors compared to the mixed catalytic system Ru(bpy)3(PF6)2/(RNPy2)PdCl2.

Optimization of Metal-Support Cooperation for Boosting the Performance of Supported Gold Catalysts for the Borylation of C-O and C-N Bonds

The cooperation of multiple catalytic components is a powerful tool for intermolecular bond formation, specifically, cross-coupling reactions. Supported metal catalysts have interfacial sites between metal nanoparticles and their supports where multiple catalytic elements can work in cooperation to efficiently promote intermolecular reactions. Hence, the establishment of novel guidelines for designing active interfacial sites of supported metal catalysts is indispensable for heterogeneous catalysts which enable efficient cross-coupling reactions. In this article, we performed kinetic and theoretical studies to elucidate the effect of metal-support cooperation for the borylation of C-O bonds by supported gold catalysts and revealed that the Lewis acid density of the supports determined the number of active sites at which metal nanoparticles (NPs) and Lewis acid at the surface of the supports work in cooperation. Furthermore, DFT calculations revealed that strong adsorption of diborons at the interface between Au NPs and supports and a decrease in the LUMO level of adsorbed diboron were responsible for efficient C-O bond borylation. Supported Au catalysts with the optimized metal-metal oxide cooperation sites, namely, Au/α-Fe2O3 catalyst, showed excellent activity for C-O bond borylation, and also enabled the synthesis of organoboron compounds by using continuous-flow reactions. Furthermore, Au/α-Fe2O3 showed high activity for direct C-N bond borylation without the transformation of amino groups to ammonium cations. The results described herein suggest that the optimization of metal-metal oxide cooperation is beneficial for taking full advantage of the potential performance of supported metal catalysts for intermolecular reactions.

Heterogeneous Porous Synergistic Photocatalysts for Organic Transformations

Recent interest has surged in using heterogeneous carriers to boost synergistic photocatalysis for organic transformations. Heterogeneous catalysts not only facilitate synergistic enhancement of distinct catalytic centers compared to their homogeneous counterparts, but also allow for the easy recovery and reuse of catalysts. This mini-review summarizes recent advancements in developing heterogeneous carriers, including metal-organic frameworks, covalent-organic frameworks, porous organic polymers, and others, for synergistic catalytic reactions. The advantages of porous materials in heterogeneous catalysis originate from their ability to provide a high surface area, facilitate enhanced mass transport, offer a tunable chemical structure, ensure the stability of active species, and enable easy recovery and reuse of catalysts. Both photosensitizers and catalysts can be intricately incorporated into suitable porous carriers to create heterogeneous dual photocatalysts for organic transformations. Notably, experimental evidence from reported cases has shown that the catalytic efficacy of heterogeneous catalysts often surpasses that of their homogeneous analogues. This enhanced performance is attributed to the proximity and confinement effects provided by the porous nature of the carriers. It is expected that porous carriers will provide a versatile platform for integrating diverse catalysts, thus exhibiting superior performance across a range of organic transformations and appealing prospect for industrial applications.

Unveiling Non-Covalent Interactions in Novel Cooperative Photoredox Systems for Efficient Alkene Oxidation in Water

A new cooperative photoredox catalytic system, [RuII(trpy)(bpy)(H2O)][3,3'-Co(8,9,12-Cl3-1,2-C2B9H8)2]2, 5, has been synthesized and fully characterized for the first time. In this system, the photoredox catalyst [3,3'-Co(8,9,12-Cl3-1,2-C2B9H8)2]-[Cl6-1]-, a metallacarborane, and the oxidation catalyst [RuII(trpy)(bpy)(H2O)]2+, 2 are linked by non-covalent interactions. This compound, along with the one previously synthesized by us, [RuII(trpy)(bpy)(H2O)][(3,3'-Co(1,2-C2B9H11)2]2, 4, are the only examples of cooperative molecular photocatalysts in which the catalyst and photosensitizer are not linked by covalent bonds. Both cooperative systems have proven to be efficient photocatalysts for the oxidation of alkenes in water through Proton Coupled Electron Transfer processes (PCETs). Using 0.05 mol% of catalyst 4, total conversion values were achieved after 15 min with moderate selectivity for the corresponding epoxides, which decreases with reaction time, along with the TON values. However, with 0.005 mol% of catalyst, the conversion values are lower, but the selectivity and TON values are higher. This occurs simultaneously with an increase in the amount of the corresponding diol for most of the substrates studied. Photocatalyst 4 acts as a photocatalyst in both the epoxidation of alkenes and their hydroxylation in aqueous medium. The hybrid system 5 shows generally higher conversion values at low loads compared to those obtained with 4 for most of the substrates studied. However, the selectivity values for the corresponding epoxides are lower even after 15 min of reaction. This is likely due to the enhanced oxidizing capacity of CoIV in catalyst 5, resulting from the presence of more electron-withdrawing substituents on the metallacarborane platform.

Visible light-promoted [3+2] cyclization reaction of vinyl azides with perfluoroalkyl-substituted-imidoyl sulfoxonium ylides

Visible-light-induced [3+2] cyclization of vinyl azides with perfluoroalkyl-substituted imidoyl sulfoxonium ylides has been developed for the first time. In this transformation, perfluoroalkyl-substituted imidoyl sulfoxonium ylides are firstly employed as a carbon radical precursor under visible light irradiation, providing a new and efficient method for the construction of perfluoroalkyl-substituted 1-pyrrolines.

Nucleophilic Organocatalyst for Photochemical Carbon Radical Generation via SN2 Substitution

Photochemical generation of radicals is a powerful way to construct various molecules. But most of these methods rely on initiators or the redox properties of radical precursors. Herein, we report a photochemical organic catalyst that reacts with benzyl halide to generate carbon radical via an SN2 pathway. This nucleophilic catalyst can be easily prepared and is bench-stable. The SN2 process does not rely on the redox properties of halides, showing potential synthetic utility. Control experiments and UV-vis spectroscopic analysis indicate that the SN2 substitution adduct is the key intermediate.

Vitamin B12 in Photocatalysis - An Underexplored Frontier in Cooperative Catalysis

Vitamin B12 (VB12) is a flexible and sustainable catalyst both in nature and the reaction flask, facilitating varied organic transformations of high value to both enzymatic processes and synthetic chemists. Key to this value is the breadth of reactivity it possesses, capable of both ionic, 2 electron chemistry, and radical, 1 electron chemistry. In particular, the ability to generate carbon-centered radical intermediates via photolysis of organocobalt intermediates formed from alkyl electrophiles opens the door to powerful new radical transformations challenging to achieve using classical photoredox or ligand-to-metal charge transfer (LMCT) catalysis. While this unique photocatalytic reactivity of VB12 has been increasingly leveraged in monocatalytic schemes, recent reports have demonstrated VB12 is able to function as the photocatalytic component in cooperative schemes, driving diverse reactivity including remote elimination of alkyl halides, regioselective epoxide arylation, and regioselective epoxide reduction. This concept briefly overviews the enabling photochemical properties of VB12 and recent applications in cooperative catalysis, providing a framework for the continued development of new cooperative catalyst systems using this powerful photoactive complex.

Heterogeneous Photocatalytic Ring Expansion of Cyclic Ketones for the Construction of Medium-Sized Lactams

Construction of medium-sized ring compounds remains challenging in synthetic chemistry. Herein, we describe the synthesis of medium-sized lactams via a photoinduced ring expansion of benzo-fused cyclic ketones using graphitic carbon nitride (g-C3N4) as a photocatalyst. The ring expansion protocol provided an efficient access to 8-10-membered lactams in good yields and displayed good tolerance to a range of functional groups. The mechanism studies revealed that the photochemical reaction proceeds via an intermediary of a nitrogen radical, which is generated through an oxidative hydrogen atom transfer (HAT) process.

Photocatalytic Multicomponent Annulation of Amide-Anchored 1,7-Diynes Enabled by Deconstruction of Bromotrichloromethane

We present the first example of visible-light-mediated multicomponent annulation of 1,7-diynes by taking advantage of quadruple cleavage olf carbon-halogen bonds of BrCCl3 to generate a C1 synthon, which was adeptly applied to the preparation of skeletally diverse 3-benzoyl-quinolin-2(1H)-one acetates in moderate to good yields. Controlled experiments demonstrated that H2O acted as both oxygen and hydrogen sources, and gem-dichlorovinyl carbonyl compound exhibited as a critical intermediate in this process. The mechanistic pathway involves Kharasch-type addition/6-exo-dig cyclization/1,5-(SN")-substitution/elimination/binucleophilic 1,6-addition/proton transfer/tautomerization sequence.

Energy transfer photocatalysis: exciting modes of reactivity

Excited (triplet) states offer a myriad of attractive synthetic pathways, including cycloadditions, selective homolytic bond cleavages and strain-release chemistry, isomerizations, deracemizations, or the fusion with metal catalysis. Recent years have seen enormous advantages in enabling these reactivity modes through visible-light-mediated triplet-triplet energy transfer catalysis (TTEnT). This tutorial review provides an overview of this emerging strategy for synthesizing sought-after organic motifs in a mild, selective, and sustainable manner. Building on the photophysical foundations of energy transfer, this review also discusses catalyst design, as well as the challenges and opportunities of energy transfer catalysis.

Visible-light S-scheme heterojunction of copper bismuthate quantum dots decorated Titania-spindles for exceptional tetracycline degradation

The rational heterojunctions for antibiotics degradation have sparked significant attention in wastewater purification. In this study, we report a unique S-scheme photocatalytic system by in-situ growth of CuBi2O4 quantum dots (QDs) onto {101} facet of TiO2 spindles (TiO2-P) via hydrothermal transformation of Na-titanate nanotubes, which is observed by transmission electron microscopy technology. The CuBi2O4/TiO2-P effectively achieves photo-degradation of tetracycline (TC) using visible light (e.g. an 82% TC degradation efficiency at 60 min), which is attributed to the promotion of the charge separation and retaining strong redox capacity at the heterojunction interfaces via the active species of O2-, OH, and h+. Moreover, density functional theory (DFT) calculations show that a built-in electric field forms at the interface of the S-scheme heterojunction. In all, this work introduces a straightforward in-situ hydrothermal growth method to construct S-scheme photocatalysts for effective water treatment.

Enhancing Photoredox Catalysis in Aqueous Environments: Ruthenium Aqua Complex Derivatization of Graphene Oxide and Graphite Rods for Efficient Visible-Light-Driven Hybrid Catalysts

A ruthenium aqua photoredox catalyst has been successfully heterogeneneized on graphene oxide (GO@trans-fac-3) and graphite rods (GR@trans-fac-3) for the first time and have proven to be sustainable and easily reusable systems for the photooxidation of alcohols in water, in mild and green conditions. We report here the synthesis and total characterization of two Ru(II)-polypyridyl complexes, the chlorido trans-fac-[RuCl(bpea-pyrene)(bpy)](PF6) (trans-fac-2) and the aqua trans-fac-[Ru(bpea-pyrene)(bpy)OH2](PF6)2 (trans-fac-3), both containing the N-tridentate, 1-[bis(pyridine-2-ylmethyl)amino]methylpyrene (bpea-pyrene), and 2,2'-bipyridine (bpy) ligands. In both complexes, only a single isomer, the trans-fac, has been detected in solution and in the solid state. The aqua complex trans-fac-3 displays bielectronic redox processes in water, assigned to the Ru(IV/II) couple. The trans-fac-3 complex has been heterogenized on different types of supports, (i) on graphene oxide (GO) through π-stacking interactions between the pyrene group of the bpea-pyrene ligand and the GO and (ii) both on glassy carbon electrodes (GC) and on graphite rods (GR) through oxidative electropolymerization of the pyrene group, which yield stable heterogeneous photoredox catalysts. GO@trans-fac-3- and GR/poly trans-fac-3-modified electrodes were fully characterized by spectroscopic and electrochemical methods. Trans-fac-3 and GO@trans-fac-3 photocatalysts (without a photosensitizer) showed good catalytic efficiency in the photooxidation of alcohols in water under mild conditions and using visible light. Both photocatalysts display high selectivity values (>99%) even for primary alcohols in accordance with the presence of two-electron transfer processes (2e-/2H+). GO@trans-fac-3 keeps intact its homogeneous catalytic properties but shows an enhancement in yields. GO@trans-fac-3 can be easily recycled by filtration and reused for up to five runs without any significant loss of catalytic activity. Graphite rods (GR@trans-fac-3) were also evaluated as heterogeneous photoredox catalysts showing high turnover numbers (TON) and selectivity values.

Photocatalytic C(sp3)-H bond functionalization by Cu(I) halide cluster-mediated O2 activation

Photocatalytic C-H bond activation is a challenging approach to selectively functionalize C(sp3)-H bonds with dioxygen under mild conditions. Herein, by merging transition metal- and photo-catalysis, photoactive Cu(I)-halide(X) (X = Cl, Br, I) clusters are employed to effectively catalyse the selective monooxygenation and C-C oxidative cross-coupling of C(sp3)-H bonds with unreactive O2 upon light irradiation. This modern protocol promises a photoinduced SET process between Cu(I)-clusters and O2, and possibly forms Cu(II)-O2˙- species for abstracting the H-atom from the C(sp3)-H bond. This process produces alkyl radicals to react with -OOH or nucleophiles for oxidation or cross-coupling products, advancing the Cu(I)-cluster mediated photoredox catalysis toward functional fine chemicals with pursued selectivity.

Visible Light and Triselenium Dicyanide (TSD): New Horizons in the Synthesis of Organic Selenocyanates

Herein, we describe a new method for the synthesis of α-carbonyl selenocyanates by reacting triselenium dicyanide (TSD) and styrenes under blue light irradiation and O2 atmosphere. The reactions are triggered by the formation of Se-centered radical species, followed by the addition/oxidation of the styrene π-bond. α-Carbonyl selenocyanates and α-hydroxy selenocyanates were obtained in moderate to excellent yields from aryl- and alkyl-substituted alkenes, respectively. It was demonstrated that α-carbonyl selenocyanates could be used as a synthetic platform in a multicomponent reaction strategy to prepare 2-phenylimidazo[1,2-a]pyridine derivatives, which were evaluated for their photophysical properties. Overall, this new method provides a useful tool for synthesizing α-carbonyl selenocyanates, and demonstrates their potential for use in the synthesis of other compounds, thus giving new synthetic opportunities to construct organic selenocyanate compounds.

N,N'-Diaryldihydrophenazines as Visible-Light Photocatalysts for Anilines' Arylation Using a Dual Photoredox/Ni(II) Cross-Coupling Strategy

It has been shown that cheap and easily available N,N'-diaryldihydrophenazines can successfully replace Ir(III)- and Ru(II)-based photocatalysts in the dual photoredox/Ni(II) C-N coupling of aryl halides with a wide range of anilines (32 examples). The efficient, operationally simple approach to diarylamines has been elaborated, which is amenable to scaling up via a flow apparatus.

Organometallic Intermediates in the Synthesis of Photoluminescent Zirconium and Hafnium Complexes with Pyridine Dipyrrolide Ligands

The two commercially available zirconium complexes tetrakis(dimethylamido)zirconium, Zr(NMe2)4, and tetrabenzylzirconium, ZrBn4, were investigated for their utility as starting materials in the synthesis of bis(pyridine dipyrrolide)zirconium photosensitizers, Zr(PDP)2. Reaction with one equivalent of the ligand precursor 2,6-bis(5-methyl-3-phenyl-1H-pyrrol-2-yl)pyridine, H2MePDPPh, resulted in the isolation and structural characterization of the complexes (MePDPPh)Zr(NMe2)2thf and (MePDPPh)ZrBn2, which could be converted to the desired photosensitizer Zr(MePDPPh)2 upon addition of a second equivalent of H2MePDPPh. Using the more sterically encumbered ligand precursor 2,6-bis(5-(2,4,6-trimethylphenyl)-3-phenyl-1H-pyrrol-2-yl)pyridine, H2MesPDPPh, only ZrBn4 yielded the desired bis-ligand complex Zr(MesPDPPh)2. Careful monitoring of the reaction at different temperatures revealed the importance of the organometallic intermediate (cyclo-MesPDPPh)ZrBn, which was characterized by X-ray diffraction analysis and 1H NMR spectroscopy and shown to contain a cyclometalated MesPDPPh unit. Taking inspiration from the results for zirconium, syntheses for two hafnium photosensitizers, Hf(MePDPPh)2 and Hf(MesPDPPh)2, were established and shown to proceed through similar intermediates starting from tetrabenzylhafnium, HfBn4. Initial studies of the photophysical properties of the photoluminescent hafnium complexes indicate similar optical properties compared to their zirconium analogues.

Benzothiadiazole covalent organic framework photocatalysis with an electron transfer mediator for selective aerobic sulfoxidation

Covalent organic frameworks (COFs) are promising visible light photocatalysts for aerobic oxidation reactions. However, COFs usually suffer from the assault of reactive oxygen species, leading to hindered electron transfer. This scenario could be addressed by integrating a mediator to promote photocatalysis. Starting with 4,4'-(benzo-2,1,3-thiadiazole-4,7-diyl)dianiline (BTD) and 2,4,6-triformylphloroglucinol (Tp), TpBTD-COF is developed as a photocatalyst for aerobic sulfoxidation. Adding an electron transfer mediator 2,2,6,6-tetramethylpiperidine-1‑oxyl (TEMPO), the conversions are radically accelerated, over 2.5 times of that without TEMPO. Moreover, the robustness of TpBTD-COF is preserved by TEMPO. Remarkably, TpBTD-COF could endure multiple cycles of sulfoxidation, even with higher conversions than the fresh one. TpBTD-COF photocatalysis with TEMPO implements diverse aerobic sulfoxidation by an electron transfer pathway. This work highlights that benzothiadiazole COFs are an avenue for tailor-made photocatalytic transformations.

Synergistic Steric and Electronic Effects on the Photoredox Catalysis by a Multivariate Library of Titania Metal-Organic Frameworks

Metal-organic frameworks (MOFs) that display photoredox activity are attractive materials for sustainable photocatalysis. The ability to tune both their pore sizes and electronic structures based solely on the choice of the building blocks makes them amenable for systematic studies based on physical organic and reticular chemistry principles with high degrees of synthetic control. Here, we present a library of eleven isoreticular and multivariate (MTV) photoredox-active MOFs, UCFMOF-n, and UCFMTV-n-x% with a formula Ti₆O₉[links]₃, where the links are linear oligo-p-arylene dicarboxylates with n number of p-arylene rings and x mol% of multivariate links containing electron-donating groups (EDGs). The average and local structures of UCFMOFs were elucidated from advanced powder X-ray diffraction (XRD) and total scattering tools, consisting of parallel arrangements of one-dimensional (1D) [Ti₆O₉(CO₂)₆]_∞ nanowires connected through the oligo-arylene links with the topology of the edge-2-transitive rod-packed hex net. Preparation of an MTV library of UCFMOFs with varying link sizes and amine EDG functionalization enabled us to study both their steric (pore size) and electronic (highest occupied molecular orbital-lowest unoccupied molecular orbital, HOMO-LUMO, gap) effects on the substrate adsorption and photoredox transformation of benzyl alcohol. The observed relationship between the substrate uptake and reaction kinetics with the molecular traits of the links indicates that longer links, as well as increased EDG functionalization, exhibit impressive photocatalytic rates, outperforming MIL-125 by almost 20-fold. Our studies relating photocatalytic activity with pore size and electronic functionalization demonstrate how these are important parameters to consider when designing new MOF photocatalysts.

Intramolecular Photoredox Reaction Mechanism of Naphthoquinone Compounds: Combined Time-Resolved Spectroscopies and DFT Calculations

Time-resolved spectroscopies and DFT calculations were utilized to investigate the photoredox mechanisms of naphthoquinone compounds. 5-Methoxy-8-tetrahydropyrane-1,4-naphthoquinone (NQ) and 2-methyl-3-(3-methylbut-2-en-1-yl) 1,4-naphthoquinone (MNQ) were excited to singlet excited species (labeled NQ(S₁) and MNQ(S₁), respectively). NQ(S₁) underwent intersystem crossing to produce a triplet NQ, which further underwent hydrogen atom transfer to form a biradical intermediate. The biradical underwent electron transfer to form a zwitterion, followed by cyclization and proton transfer to generate a photoproduct. MNQ(S₁) underwent a 1,4-proton transfer process to produce a quinone methide intermediate (1,3-QM) with zwitterionic character, which tautomerized to 1,2-QM. Then, 1,2-QM underwent electrocyclization. The substituent on the parent naphthoquinone is the key factor leading to the different reaction processes for NQ and MNQ.

Supramolecular Coordination Cages for Artificial Photosynthesis and Synthetic Photocatalysis

Because sunlight is the most abundant energy source on earth, it has huge potential for practical applications ranging from sustainable energy supply to light driven chemistry. From a chemical perspective, excited states generated by light make thermodynamically uphill reactions possible, which forms the basis for energy storage into fuels. In addition, with light, open-shell species can be generated which open up new reaction pathways in organic synthesis. Crucial are photosensitizers, which absorb light and transfer energy to substrates by various mechanisms, processes that highly depend on the distance between the molecules involved. Supramolecular coordination cages are well studied and synthetically accessible reaction vessels with single cavities for guest binding, ensuring close proximity of different components. Due to high modularity of their size, shape, and the nature of metal centers and ligands, cages are ideal platforms to exploit preorganization in photocatalysis. Herein we focus on the application of supramolecular cages for photocatalysis in artificial photosynthesis and in organic photo(redox) catalysis. Finally, a brief overview of immobilization strategies for supramolecular cages provides tools for implementing cages into devices. This review provides inspiration for future design of photocatalytic supramolecular host-guest systems and their application in producing solar fuels and complex organic molecules.

Heterogeneous Photoredox Catalysis Based on Silica Mesoporous Material and Eosin Y: Impact of Material Support on Selectivity of Radical Cyclization

Heterogenization of the photocatalyst appears to be a valuable solution to reach sustainable processes. Rapid and efficient synthesis of supported photocatalyst is still a remaining challenge and the choice of the support material is crucial. The present study aims at preparing a new generation of hybrid inorganic/organic photocatalysts based on silica mesoporous material and Eosin Y. These results highlight the influence of non-covalent interactions between the material support and the reagent impacting the selectivity of the reaction.

A Photoredox/Sulfide Dual Catalysis System That Uses Sulfide Radical Cations to Promote Alkene Chlorotrifluoromethylation

Sulfides and their derivatives are among the most important class of reagent in synthetic chemistry. Despite the importance of such compounds, the use of sulfide radical cations in synthetic chemistry is underdeveloped. To address this issue, herein, we describe alkene chlorotrifluoromethylation reactions promoted by photoredox/sulfide dual catalysis systems, which involves sulfide radical cations generated through the oxidation of sulfides by a photoredox catalyst. The high functional group tolerance of this chemistry was demonstrated using natural products and drug molecules as substrate alkenes.

Divergent and Synergistic Photocatalysis: Hydro- and Oxoalkylation of Vinyl Arenes for the Stereoselective Synthesis of Cyclopentanols via a Formal [4+1]-Annulation of 1,3-Dicarbonyls

The controllable divergent reactivity of 1,3-dicarbonyls is described, which enables the efficient hydro- and oxoalkylation of vinyl arenes. Both reaction pathways are initiated through the formation of polarity-reversed C-centered-radical intermediates at the active methylene center of 1,3-dicarbonyls via direct photocatalytic C–H bond transformations. The oxoalkylation of alkenes is achieved under aerobic conditions via a Cu(II)-photomediated rebound mechanism, while the corresponding hydroalkylation becomes possible under a nitrogen atmosphere by the combination of 4CzIPN and a Brønsted base. The breadth of these divergent protocols is demonstrated in the late-stage modification of drugs and natural products and by the transformation of the products to a variety of heterocycles such as pyridines, pyrroles, or furans. Moreover, the two catalytic modes can be combined synergistically for the stereoselective construction of cyclopentanol derivatives in a formal [4+1]-annulation process.

Combining Enzyme and Photoredox Catalysis for the Construction of 3-Aminoalkyl Chromones

Herein, we reported a practical and efficient strategy combining photoredox and enzyme catalysis for the construction of 3-aminoalkyl chromones from o-hydroxyaryl enaminones and N-arylglycine esters. A variety of 3-aminoalkyl chromones were synthesized with good yields under mild conditions in one pot. This synthetic protocol consists of sequential enzymatic hydrolysis and photoredox decarboxylation of N-arylglycine esters, oxidation of aminoalkyl radicals, Mannich reaction, and intramolecular nucleophilic cyclization, which affords a convenient pathway for the preparation of various 3-substituted chromones.

Edge modification facilitated heterogenization and exfoliation of two-dimensional nanomaterials for cancer catalytic therapy

The rapid recombination of electron-hole pairs and limited substrates are the most critical factors astricting the effect of catalytic therapy. Thus, two-dimensional interplanar heterojunction (BiOCl/Bi₂O₃) that prolongs the lifetime of excited electrons and holes and extends the selectivity of substrates under ultrasound irradiation is prepared to facilitate high-performance cancer therapy. An edge modification displacing marginal BiOCl to Bi₂O₃ is proposed to construct the interplanar heterojunction, promoting ultrathin nanosheets exfoliation due to the enhanced edge affinity with H₂O. The spontaneously aligning Fermi levels mediate a built-in electric field-guided Z-scheme interplanar heterojunction, retard electron-hole pairs recombination, and improve redox potentials. Hence, these high-powered electrons and holes are capable of catalyzing diverse and stable substrates, such as the reduction reactions, O₂ → ·O₂^- and CO₂ → CO, and oxidation reactions, GSH → GSSG and H₂O → ·OH. The Z-scheme interplanar heterojunction with the extending substrates selectivity completely breaks the tumor microenvironment limitation, exhibiting high anticancer activity.

Organic Photoredox Catalysts Exhibiting Long Excited-State Lifetimes

Organic photoredox catalysts with a long excited-state lifetime have emerged as promising alternatives to transition-metal-complex photocatalysts. This paper explains the effectiveness of using long-lifetime photoredox catalysts for organic transformations, focusing on the structures and photophysics that enable long excited-state lifetimes. The electrochemical potentials of the reported organic, long-lifetime photocatalysts are compiled and compared with those of the representative Ir(III)- and Ru(II)-based catalysts. This paper closes by providing recent demonstrations of the synthetic utility of the organic catalysts.

1 Introduction

2 Molecular Structure and Photophysics

3 Photoredox Catalysis Performance

4 Catalysis Mediated by Long-Lifetime Organic Photocatalysts

4.1 Photoredox Catalytic Generation of a Radical Species and its Addition to Alkenes

4.2 Photoredox Catalytic Generation of a Radical Species and its Addition to Arenes

4.3 Photoredox Catalytic Generation of a Radical Species and its Addition to Imines

4.4 Photoredox Catalytic Generation of a Radical Species and its Addition to Substrates Having C≡X Bonds (X=C, N)

4.5 Photoredox Catalytic Generation of a Radical Species and its Bond Formation with Transition Metals

4.6 Miscellaneous Reactions of Radical Species Generated by Photoredox Catalysis

5 Conclusions

Direct Utilization of Near-Infrared Light for Photooxidation with a Metal-Free Photocatalyst

Near-infrared (NIR) light-triggered photoredox catalysis is highly desirable because NIR light occupies almost 50% of solar energy and possesses excellent penetrating power in various media. Herein we utilize a metal-free boron dipyrromethene (BODIPY) derivative as the photocatalyst to achieve NIR light (720 nm LED)–driven oxidation of benzylamine derivatives, sulfides, and aryl boronic acids. Compared to blue light–driven photooxidation using Ru(bpy)₃Cl₂ as a photocatalyst, NIR light–driven photooxidation exhibited solvent independence and superior performance in large-volume (20 mL) reaction, presumably thanks to the neutral structure of a BODIPY photocatalyst and the deeper penetration depth of NIR light. We further demonstrate the application of this metal-free NIR photooxidation to prodrug activation and combination with Cu-catalysis for cross coupling reaction, exhibiting the potential of metal-free NIR photooxidation as a toolbox for organic synthesis and drug development.

Visible-Light Photoredox Catalysis in Water

The use of water in organic synthesis draws attention to its green chemistry features and its unique ability to unveil unconventional reactivities. Herein, literature about the use of water as a reaction medium under visible-light photocatalytic conditions is summarized in order to highlight challenges and opportunities. Accordingly, this Synopsis has been divided into four different sections focused on (1) the unconventional role of water in photocatalytic reactions, (2) in-/on-water reactions, (3) water-soluble photocatalysts, and (4) photomicellar catalytic systems.

Solution-processable microporous polymer platform for heterogenization of diverse photoredox catalysts

In contemporary organic synthesis, substances that access strongly oxidizing and/or reducing states upon irradiation have been exploited to facilitate powerful and unprecedented transformations. However, the implementation of light-driven reactions in large-scale processes remains uncommon, limited by the lack of general technologies for the immobilization, separation, and reuse of these diverse catalysts. Here, we report a new class of photoactive organic polymers that combine the flexibility of small-molecule dyes with the operational advantages and recyclability of solid-phase catalysts. The solubility of these polymers in select non-polar organic solvents supports their facile processing into a wide range of heterogeneous modalities. The active sites, embedded within porous microstructures, display elevated reactivity, further enhanced by the mobility of excited states and charged species within the polymers. The independent tunability of the physical and photochemical properties of these materials affords a convenient, generalizable platform for the metamorphosis of modern photoredox catalysts into active heterogeneous equivalents.

Diastereoselective and enantioselective photoredox pinacol coupling promoted by titanium complexes with a red-absorbing organic dye

The pinacol coupling reaction, a reductive coupling of carbonyl compounds that proceeds through the formation of ketyl radicals in the presence of an electron donor, affords the corresponding 1,2-diols in one single step. The photoredox version of this transformation has been accomplished using different organic dyes or photoactive metal complexes in the presence of sacrificial donors such as tertiary amines or Hantzsch's ester. Normally, the homo-coupling of such reactive ketyl radicals is neither diastereo- nor enantio-selective. Herein, we report a highly diastereoselective pinacol coupling reaction of aromatic aldehydes promoted by 5 mol% of the non-toxic, inexpensive and available Cp₂TiCl₂ complex. The key feature that allows the complete control of diastereoselectivity is the employment of a red-absorbing organic dye in the presence of a redox-active titanium complex. Taking advantage of the well-tailored photoredox potential of this organic dye, the selective reduction of Ti(iv) to Ti(iii) is achieved. These conditions enable the formation of the d,l (syn) diastereoisomer as the favored product of the pinacol coupling (d.r. > 20 : 1 in most of the cases). Moreover, employing a simply prepared chiral SalenTi complex, the new photoredox reaction gave a complete diastereoselection for the d,l diastereoisomer, and high enantiocontrol (up to 92% of enantiomeric excess).

A metallaphotoredox, diastereoselective and enantioselective pinacol coupling reaction promoted by titanium complexes with the use of a red-absorbing organic dye was developed.