Polymers and the p-block elements

1,3-Dipolar cyclisation reactions of nitriles with sterically encumbered cyclic triphosphanes: synthesis and electronic structure of phosphorus-rich heterocycles with tunable colour

We describe the synthesis, solid state and electronic structures of a series of tunable five-membered cationic and charge-neutral inorganic heterocycles featuring a P3CN core. 1-Aza-2,3,4-triphospholenium cations [(PR)3N(H)CR']+, [1R]+ (R' = Me, Ph, 4-MeOC6H4, 4-CF3C6H4) were formed as triflate salts by the formal [3 + 2]-cyclisation reactions of strained cyclic triphosphanes (PR)3 (R = t Bu, 2,4,6-Me3C6H2 (Mes), 2,6- i Pr2C6H3 (Dipp), 2,4,6- i Pr3C6H2 (Tipp)) with nitriles R'CN in the presence of triflic acid. The corresponding neutral free bases (PR)3NCR' (2R) were readily obtained by subsequent deprotonation with NEt3. The P3CN cores in 2R show an envelope conformation typical for cyclopentenes and present as yellow to orange compounds in the solid state as well as in solution depending on both substituents R and R' in (PR)3NCR'. The P3CN cores in [1R]+ show a significant deviation from planarity with increasing steric bulk of the R groups at phosphorus, which results in a decrease in the HOMO-LUMO gap and distinct low-energy UV-Visible absorption bands. This allows access to colours spanning red, blue, indigo, and magenta. TD-DFT calculations provide valuable insight into this phenomenon and indicate an intramolecular charge-transfer from the HOMO located on the P3 framework to the N[double bond, length as m-dash]C-R'-based LUMO in the cationic species. The cations [1R]+ represent rare examples of phosphorus-rich heterocycles with tunable colour, which can be incorporated into polymers by post-polymerization modification to afford coloured polymers, which demonstrate utility as both proton and ammonia sensors.

Thermal and Photoinduced Radical Cascade Annulation using Aryl Isonitriles: An Approach to Quinoline-Derived Benzophosphole Oxides

Herein, we present a radical cascade addition cyclization sequence to access quinoline-based benzophosphole oxides from ortho-alkynylated aromatic phosphine oxides using various aryl isonitriles as radical acceptors and inexpensive tert-butyl-hydroperoxide (TBHP) as a terminal oxidant in the presence of a catalytic amount of silver acetate. Alternatively, the same cascade can be realized through a sustainable photochemical approach utilizing 1,2,3,5-tetrakis(carbazol-9-yl)-4,6-dicyanobenzene (4CzIPN) as an organic photocatalyst at room temperature. The introduced modular approach shows broad functional group tolerance and offers straightforward access to complex P,N-containing polyheterocyclic arenes. These novel π-extended benzophosphole oxides exhibit interesting photophysical and electrochemical properties such as absorption in the visible region, emission and reversible reduction at low potentials, which makes them promising for potential materials science applications. The photophysical properties can further be tuned by the addition of external Lewis and Brønsted acids.

Probing the Electron Accepting Ability of Phosphaphenalenes

Phosphaphenalenes, extended π conjugates with the incorporation of phosphorus, are attractive avenues towards molecular materials for the applications in organic electronics, but their electron accepting ability have not been investigated. Herein we present systematic studies on the reductive behavior of a representative phosphaphenalene and its oxide by chemical and electrochemical methods. The chemical reduction of the phosphaphenalene by alkali metals reveals the facile P-C bond cleavage to form phosphaphenalenide anion, which functions as a transfer block for structure modification on the phosphorus atom. In contrast, the pentavalent P-oxide reacts with one or two equivalents of elemental sodium to form stable radical anion and dianion salts, respectively.

The p-block challenge: assessing quantum chemistry methods for inorganic heterocycle dimerizations

The elements of the p-block of the periodic table are of high interest in various chemical and technical applications like frustrated Lewis-pairs (FLP) or opto-electronics. However, high-quality benchmark data to assess approximate density functional theory (DFT) for their theoretical description are sparse. In this work, we present a benchmark set of 604 dimerization energies of 302 "inorganic benzenes" composed of all non-carbon p-block elements of main groups III to VI up to polonium. This so-called IHD302 test set comprises two classes of structures formed by covalent bonding and by weaker donor-acceptor (WDA) interactions, respectively. Generating reliable reference data with ab initio methods is challenging due to large electron correlation contributions, core-valence correlation effects, and especially the slow basis set convergence. To compute reference values for these dimerization reactions, after thorough testing, we applied a computational protocol using state-of-the-art explicitly correlated local coupled cluster theory termed PNO-LCCSD(T)-F12/cc-VTZ-PP-F12(corr.). It includes a basis set correction at the PNO-LMP2-F12/aug-cc-pwCVTZ level. Based on these reference data, we assess 26 DFT methods in combination with three different dispersion corrections and the def2-QZVPP basis set, five composite DFT approaches, and five semi-empirical quantum mechanical methods. For the covalent dimerizations, the r2SCAN-D4 meta-GGA, the r2SCAN0-D4 and ωB97M-V hybrids, and the revDSD-PBEP86-D4 double-hybrid functional are found to be the best-performing methods among the evaluated functionals of the respective class. However, since def2 basis sets for the 4th period are not associated to relativistic pseudo-potentials, we obtained significant errors in the covalent dimerization energies (up to 6 kcal mol-1) for molecules containing p-block elements of the 4th period. Significant improvements were achieved for systems containing 4th row elements by using ECP10MDF pseudopotentials along with re-contracted aug-cc-pVQZ-PP-KS basis sets introduced in this work with the contraction coefficients taken from atomic DFT (PBE0) calculations. Overall, the IHD302 set represents a challenge to contemporary quantum chemical methods. This is due to a large number of spatially close p-element bonds which are underrepresented in other benchmark sets, and the partial covalent bonding character for the WDA interactions. The IHD302 set may be helpful to develop more robust and transferable approximate quantum chemical methods in the future.

Direct Synthesis of Tertiary Phosphines via Alkoxide-Mediated Deborylative Phosphination of Organoboronates

The direct transformation of alkylboron has emerged as a versatile and powerful methodology for creating carbon-carbon and carbon-heteroatom bonds. However, its potential application in the formation of carbon and phosphorus remains unexplored. In this study, we present an alkoxide base-promoted reaction system that enables deborylative phosphination of benzylic organoboronates and geminal bis(boronates) via selective C-B bond cleavage. This approach allows for the synthesis of valuable tertiary phosphines in good yields under mild conditions. The practicality and industrial potential of this approach are underscored by the operational simplicity, broad substrate scope, and easy scalability.

Synthesis, structures, and photophysical properties of π-extended arsaborins

In this study, various (hetero)arene-fused arsaborins were synthesized. All the synthesized arsaborins were stable under ambient conditions and allowed for the chemical modification of the lone pair of the arsenic atom. Experimental and computational studies revealed that these compounds possessed planar structures and weak anti-aromatic properties. Fluorescence with large Stokes shifts was observed due to drastic structural relaxation at 298 K, whereas intense phosphorescence due to the heavy-atom effect of arsenic was observed at 77 K. Furthermore, a thiophene-fused derivative demonstrated a temperature-dependent emission color change in the solid state, attributable to the gradual alteration in the ratio of monomer fluorescence, excimer fluorescence, and phosphorescence.

Dehydropolymerization of Amine-Boranes using Bis(imino)pyridine Rhodium Pre-Catalysis: σ-Amine-Borane Complexes, Nanoparticles, and Low Residual-Metal BN-Polymers that can be Chemically Repurposed

The sigma amine-borane complexes [Rh(L1)(η2 :η2 -H3 B⋅NRH2 )][OTf] (L1=2,6-bis-[1-(2,6-diisopropylphenylimino)ethyl]pyridine, R=Me, Et, n Pr) are described, alongside [Rh(L1)(NMeH2 )][OTf]. Using R=Me as a pre-catalyst (1 mol %) the dehydropolymerization of H3 B ⋅ NMeH2 gives [H2 BNMeH]n selectively. Added NMeH2 , or the direct use of [Rh(L1)(NMeH2 )][OTf], is required for initiation of catalysis, which is suggested to operate through the formation of a neutral hydride complex, Rh(L1)H. The formation of small (1-5 nm) nanoparticles is observed at the end of catalysis, but studies are ambiguous as to whether the catalysis is solely nanoparticle promoted or if there is a molecular homogeneous component. [Rh(L1)(NMeH2 )][OTf] is shown to operate at 0.025 mol % loadings on a 2 g scale of H3 B ⋅ NMeH2 to give polyaminoborane [H2 BNMeH]n [Mn =30,900 g/mol, Ð=1.8] that can be purified to a low residual [Rh] (6 μg/g). Addition of Na[N(SiMe3 )2 ] to [H2 BNMeH]n results in selective depolymerization to form the eee-isomer of N,N,N-trimethylcyclotriborazane [H2 BNMeH]3 : the chemical repurposing of a main-group polymer.

Poly(thiophene iminoborane): A Poly(thiophene vinylene) (PTV) Analogue with a Fully BN-Doped Backbone

An unprecedented poly(thiophene iminoborane)-a boron-nitrogen analogue of the well-established conjugated organic polymer poly(thiophene vinylene)-is presented. The polymer synthesis is achieved by selective Si/B exchange polycondensation of a 2,5-diborylthiophene with a 2,5-diaminothiophene derivative. For the latter, a facile synthetic strategy is devised, which makes this versatile, strongly electron-releasing building block easily accessible. The novel polymer and a series of monodisperse thiophene iminoborane oligomers reveal systematic bathochromic shifts in their absorption with increasing chain length, and thus extended π-conjugation over the BN units along the backbone, which is further supported by TD-DFT calculations.

Poly(arylene iminoborane)s, Analogues of Poly(arylene vinylene) with a BN-Doped Backbone: A Comprehensive Study

Despite the great success of the concept of doping organic compounds with BN units to access new materials with tailored properties, its use in polymer chemistry has only been realized quite recently. Herein, we present a comprehensive study of oligo- and poly(arylene iminoborane)s comprising a backbone of phenylene or thiophene moieties, as well as combinations thereof, linked via B=N units. The novel polymers can be regarded as BN analogues of poly(p-phenylene vinylene) (PPV) or poly(thiophene vinylene) (PTV) or their copolymers. Our modular synthetic approach allowed us to prepare four polymers and 12 monodisperse oligomers with modulated electronic properties. Alternating electron-releasing diaminoarylene and electron-accepting diborylarylene building blocks gave rise to a pronounced donor-acceptor character. Effective π-conjugation over the arylene iminoborane backbone is evidenced by systematic bathochromic shifts of the low-energy UV-vis absorption maximum with increasing chain length, which is furthermore supported by crystallographic and computational investigations. Furthermore, all compounds investigated show emission of visible light in the solid state and aggregation-induced emission (AIE) behavior, due to the presence of partially flexible linear B=N linkages in the backbone.

Covalent connections between metal-organic frameworks and polymers including covalent organic frameworks

Hybrid composite materials combining metal-organic frameworks (MOFs) and polymers have emerged as a versatile platform for a broad range of applications. The crystalline, porous nature of MOFs and the flexibility and processability of polymers are synergistically integrated in MOF-polymer composite materials. Covalent bonds, which form between two distinct materials, have been extensively studied as a means of creating strong molecular connections to facilitate the dispersion of "hard" MOF particles in "soft" polymers. Numerous organic transformations have been applied to post-synthetically connect MOFs with polymeric species, resulting in a variety of covalently connected MOF-polymer systems with unique properties that are dependent on the characteristics of the MOFs, polymers, and connection modes. In this review, we provide a comprehensive overview of the development and strategies involved in preparing covalently connected MOFs and polymers, including recently developed MOF-covalent organic framework composites. The covalent bonds, grafting strategies, types of MOFs, and polymer backbones are summarized and categorized, along with their respective applications. We highlight how this knowledge can serve as a basis for preparing macromolecular composites with advanced functionality.

Iterative Synthesis of Oligosilanes Using Methoxyphenyl- or Hydrogen-Substituted Silylboronates as Building Blocks: A General Synthetic Method for Complex Oligosilanes

Organosilanes have attracted the attention of researchers for more than 150 years due to their unique properties, and they have become indispensable industrial assets. However, many synthesized oligosilanes with multiple Si-Si bonds are relatively simple, i.e., they often only contain a single repeating unit. More laborious customized synthetic routes can lead to more complex oligosilanes, but compared to carbon-based molecules, their structural diversity remains limited. The development of effective and practical synthetic routes to complex oligosilanes that contain mixed substituents constitutes a long-standing challenge. Here, we describe an iterative synthesis of oligosilanes using methoxyphenyl- or hydrogen-substituted silylboronates, which were obtained via transition-metal-catalyzed Si-H borylation reactions. The first key reaction is a cross-Si-Si bond-forming reaction between chloro(oligo)silanes and silylboronates activated by MeLi. The second key reaction is the selective chlorination of the methoxyphenyl group or the hydrogen atom at the terminal of the oligosilanes. Iteration of these two key reactions enables the synthesis of various oligosilanes that are otherwise difficult to access. As a demonstration of the synthetic utility of this iterative synthetic approach, oligosilanes with different sequences were prepared by simply changing the order of the reaction of four different silicon units. Furthermore, a bespoke tree-shaped oligosilane is easily obtained via the present iterative synthesis. The solid-state structures of several of these oligosilanes were unequivocally determined using single-crystal X-ray diffraction analysis.

A Robust, Divalent, Phosphaza-bicyclo[2.2.2]octane Connector Provides Access to Cage-Dense Inorganic Polymers and Networks

While polymers containing chain or ring motifs in their backbone are ubiquitous, those containing well-defined molecular cages are very rare and essentially unknown for the inorganic elements. We report that a rigid and dinucleophilic cage (PNSiMe₃)₂(NMe)₆, which is chemically robust and accessible on a multi-gram scale from commercial precursors, serves as a linear and divalent connector that forms cage-dense inorganic materials. Reaction of the cage with various ditopic P(III) dihalide comonomers proceeded via Me₃SiCl elimination to give high molecular weight (30 000-70 000 g mol^-1), solution-processable polymers that form free-standing films. The end groups of the polymers could be tuned to engender orthogonal reactivity and form block copolymers. Networked cage-dense materials could be accessed by using PCl₃ as a tritopic P(III) linker. Detailed mechanistic studies implicate a stepwise polycondensation that proceeds via phosphino-phosphonium ion intermediates, prior to Me₃SiCl loss. Thus, metathesis between the dinucleophilic cage and polyhalides represents a general strategy to making cage-dense polymers, setting the stage for systematically understanding the consequences of the three-dimensional microstructure on macroscopic material properties.

Molecular Persistent Room-Temperature Phosphorescence from Tetraarylaminoboranes

Herein, we report the synthesis, molecular structure, and optical features of tetrarylaminoboranes 1 (Mes₂B-N(Ph)(C₁₀H₇)) and 2 (Mes₂B-N(Ph)(C₁₄H₉)). In the solution state, 1 shows aggregation-induced emission enhancement and color switching, while 2 displays emission color switching and aggregation-caused quenching. At 77 K, frozen solutions of 1 show delayed fluorescence (DF) and phosphorescence, whereas 2 display only DF. Pristine solids of 1 and 2 showed delayed fluorescence under ambient conditions; however, crystals of both compounds show no phosphorescence under similar conditions. Polymethyl methacrylate thin films of 1 (1 wt % doping concentration) exhibit persistent room-temperature phosphorescence (pRTP) lasting for ∼0.5 s. In contrast, 2 does not show phosphorescence under similar conditions. Systematic photophysical studies and theoretical (DFT and TD-DFT) calculations are performed on these molecules to rationalize their intriguing optical characteristics.

Transition-Metal-Free Dehydropolymerization of Phosphine-Boranes at Ambient Temperature

Stoichiometric reaction of phosphine-borane adducts RR'PH⋅BH₃ (R=Ph, R'=H, Ph, Et, and R=R'=^t Bu) with the strong acid HNTf₂ (Tf=SO₂ CF₃ ) leads to H₂ elimination and the formation of the triflimido derivatives, RR'PH⋅BH₂ (NTf₂ ). Subsequent deprotonation by using bases, such as diisopropylethylamine or the carbene IPr (IPr=N,N'-bis(2,6-diisopropylphenyl)imidazol-2-ylidene), led to the formation of P-mono- or -disubstituted polyphosphinoboranes [RR'P-BH₂ ]_n . Evidence for the intermediacy of transient phosphinoborane monomers, RR'PBH₂ , was provided by trapping reactions.

Synthesis and Structure-Property Relationships in Regioisomeric Alternating Borane-Terthiophene Polymers

Main-chain boron-containing π-conjugated polymers are attractive for organic electronic, sensing, and imaging applications. Alternating terthiophene-borane polymers were prepared and the effects of regioisomeric attachment of the conjugated linker and variations in the electronic effect of the pendent aryl groups (2,4,6-tri-tert-butylphenyl, Mes*; 2,4,6-tris(trifluoromethyl)phenyl, FMes) examined. Pd₂ dba₃ /P(t-Bu)₃ -catalyzed Stille polymerization of arylbis(2-thienyl)borane and arylbis(3-thienylborane) with 2,5-bis(trimethylstannyl)thiophene at 120 °C gave polymers with appreciable molecular weight but MALDI-TOF MS analyses showed evidence of unusually prominent homocoupling. These defects could be suppressed by using brominated rather than iodinated monomers, more hindered 2,5-bis(tri-n-butylstannyl)thiophene as comonomer, and Pd₂ dba₃ /P(o-tol)₃ as the catalyst at 100 °C. Under these conditions, macrocyclic species with n=3-10 repeating units formed preferentially according to MALDI-TOF MS analyses. Photophysical studies revealed a prominent effect of the regiochemistry and the nature of the pendent aryl groups on the absorption and emission, giving rise to orange, yellow-green, blue-green, and blue emissive materials respectively. The electronic effects were rationalized through DFT calculations on bis(terthiophene) model systems.

Dehydropolymerization of H3B·NMeH2 Mediated by Cationic Iridium(III) Precatalysts Bearing κ3-iPr-PNRP Pincer Ligands (R = H, Me): An Unexpected Inner-Sphere Mechanism

The dehydropolymerization of H₃B·NMeH₂ to form N-methylpolyaminoborane using neutral and cationic catalysts based on the {Ir(ⁱPr-PN^HP)} fragment [ⁱPr-PN^HP = κ³-(CH₂CH₂PⁱPr₂)₂NH] is reported. Neutral Ir(ⁱPr-PN^HP)H₃ or Ir(ⁱPr-PN^HP)H₂Cl precatalysts show no, or poor and unselective, activity respectively at 298 K in 1,2-F₂C₆H₄ solution. In contrast, addition of [NMeH₃][BAr^F₄] (Ar^F = 3,5-(CF₃)₂C₆H₃) to Ir(ⁱPr-PN^HP)H₃ immediately starts catalysis, suggesting that a cationic catalytic manifold operates. Consistent with this, independently synthesized cationic precatalysts are active (tested between 0.5 and 2.0 mol % loading) producing poly(N-methylaminoborane) with M_n ∼ 40,000 g/mol, Đ ∼1.5, i.e., dihydrogen/dihydride, [Ir(ⁱPr-PN^HP)(H)₂(H₂)][BAr^F₄]; σ-amine-borane [Ir(ⁱPr-PN^HP)(H)₂(H₃B·NMe₃)][BAr^F₄]; and [Ir(ⁱPr-PN^HP)(H)₂(NMeH₂)][BAr^F₄]. Density functional theory (DFT) calculations probe hydride exchange processes in two of these complexes and also show that the barrier to amine-borane dehydrogenation is lower (22.5 kcal/mol) for the cationic system compared with the neutral system (24.3 kcal/mol). The calculations show that the dehydrogenation proceeds via an inner-sphere process without metal–ligand cooperativity, and this is supported experimentally by N–Me substituted [Ir(ⁱPr-PN^MeP)(H)₂(H₃B·NMe₃)][BAr^F₄] being an active catalyst. Key to the lower barrier calculated for the cationic system is the outer-sphere coordination of an additional H₃B·NMeH₂ with the N–H group of the ligand. Experimentally, kinetic studies indicate a complex reaction manifold that shows pronounced deceleratory temporal profiles. As supported by speciation and DFT studies, a key observation is that deprotonation of [Ir(ⁱPr-N^HP)(H)₂(H₂)][BAr^F₄], formed upon amine-borane dehydrogenation, by the slow in situ formation of NMeH₂ (via B–N bond cleavage), results in the formation of essentially inactive Ir(ⁱPr-PN^HP)H₃, with a coproduct of [NMeH₃]⁺/[H₂B(NMeH₂)₂]⁺. While reprotonation of Ir(ⁱPr-PN^HP)H₃ results in a return to the cationic cycle, it is proposed, supported by doping experiments, that reprotonation is attenuated by entrainment of the [NMeH₃]⁺/[H₂B(NMeH₂)₂]⁺/catalyst in insoluble polyaminoborane. The role of [NMeH₃]⁺/[H₂B(NMeH₂)]⁺ as chain control agents is also noted.

Tetra-Coordinated Boron-Functionalized Phenanthroimidazole-Based Zinc Salen as a Photocatalyst for the Cycloaddition of CO2 and Epoxides

A unique B-N coordinated phenanthroimidazole-based zinc salen was synthesized. The zinc salen thus synthesized acts as a photocatalyst for the cycloaddition of carbon dioxide with terminal epoxides under ambient conditions. DFT study of the cycloaddition of carbon dioxide with terminal epoxide indicates the preference of the reaction pathway when photocatalyzed by zinc salen. We anticipate that this strategy will help to design new photocatalysts for CO₂ fixation.

Calix[4]pyrrolato Aluminate Catalyzes the Dehydrocoupling of Phenylphosphine Borane to High Molar Weight Polymers

High molar weight polyphosphinoboranes represent materials with auspicious properties, but their preparation requires transition metal‐based catalysts. Here, calix[4]pyrrolato aluminate is shown to induce the dehydropolymerization of phosphine boranes to high molar mass polyphosphinoboranes (up to M_n=43 000 Da). Combined GPC and ³¹P DOSY NMR spectroscopic analyses, quantum chemical computations, and stoichiometric reactions disclose a P−H bond activation by the cooperative action of the square‐planar aluminate and the electron‐rich ligand framework. This first transition metal‐free catalyst for P−B dehydrocoupling overcomes the problem of residual d‐block metal impurities in the resulting polymers that might interfere with the reproducibility of the properties for this emerging class of inorganic materials.

Poly(cyclosilane) Connectivity Tunes Optical Absorbance

We report herein the influence of skeletal connectivity on the conformation-dependent optical properties of cyclosilane homo- and copolymers. 1,3-Linked cyclosilanes were bathochromically shifted by 20 nm in solution relative to 1,4-linked cyclosilanes, an effect reproduced by quantum chemical calculations on oligomeric model systems. Polysilane optical properties are conformation-dependent, and 1,3-linked cyclosilanes were hypothesized to adopt a favorable conformation unavailable to 1,4-linked cyclosilanes constrained to an endocyclic gauche conformation. Copolymerization of the isomeric cyclosilanes 1,3Si₆ and 1,4Si₆ afforded linear statistical copolymers, as characterized by ¹H and ²⁹Si NMR spectroscopies. The distinct connectivity of each comonomer was found to give rise to tunable absorption spectra, where the position of the absorption band systematically increased with the increased corporation of 1,3Si₆. Computational studies pointed to conformation-dependent changes in orbital symmetry in shifting the most intense transition from the low-energy highest occupied molecular orbital (HOMO) → lowest unoccupied molecular orbital (LUMO) transition to a higher-energy HOMO → LUMO + n transition. The results of these studies demonstrate for the first time the role of silicon skeletal connectivity in controlling conformation and optoelectronic properties and provide new insight into the structure-based design of solution-processable silicon-based polymeric materials.

Recent advances in the domain of Cyclic (alkyl)(amino) carbenes

Isolation of cyclic (alkyl) amino carbenes (cAACs) in 2005 has been a major achievement in the field of stable carbenes due to their better electronic properties. cAACs and bicyclic(alkyl)(amino)carbene (BicAAC) in essence are the most electrophilic as well as nucleophilic carbenes are known till date. Due to their excellent electronic properties in terms of nucleophilic and electrophilic character, cAACs have been utilized in different areas of chemistry, including stabilization of low valent main group and transition metal species, activation of small molecules, and catalysis. The applications of cAACs in catalysis have opened up new avenues of research in the field of cAAC chemistry. This review summarizes the major results of cAAC chemistry published until August 2021.

Design and synthesis of stable four-coordinated benzotriazole-borane with tunable fluorescence emission

A new class of stable four-coordinated benzotriazole-borane compounds was developed via gold-catalyzed alkyne hydroboration. The application of polymeric (BH₂CN)_n reagent gave the formation of cyano-amine-boranes (CAB) complexes with less basic N-heterocyclic amines and anilines. Various new CABs were investigated in catalytic hydroboration to synthesize N–B cycles. The 1,2,3-benzotriazoles were identified as the only feasible N-source, giving the four coordinated borane N–B cycles (BTAB) in excellent yields (up to 90%) with good functional group tolerability. This new class of polycyclic N–B compounds showed excellent stability toward acid, base, high temperature, and photo-irradiation. The facile synthesis, excellent stability, strong and tunable fluorescence emission make BTAB interesting new fluorescent probes for future chemical and biological applications.

A new class of benzotriazole-boranes was developed via gold-catalyzed alkyne hydroboration. The facile synthesis, excellent stability, strong and tunable fluorescence emission make BTAB new fluorescent probes for chemical and biological applications.

P-block atom modified Sn(200) surface as a promising electrocatalyst for two-electron CO2 reduction: a first-principles study

The P-block atom can effectively regulate the activity of two-electron CO2 reduction on Sn(200) surface.

Controlled Synthesis of Well-Defined Polyaminoboranes on Scale Using a Robust and Efficient Catalyst

The air tolerant precatalyst, [Rh(L)(NBD)]Cl ([1]Cl) [L = κ³-(ⁱPr₂PCH₂CH₂)₂NH, NBD = norbornadiene], mediates the selective synthesis of N-methylpolyaminoborane, (H₂BNMeH)_n, by dehydropolymerization of H₃B·NMeH₂. Kinetic, speciation, and DFT studies show an induction period in which the active catalyst, Rh(L)H₃ (3), forms, which sits as an outer-sphere adduct 3·H₃BNMeH₂ as the resting state. At the end of catalysis, dormant Rh(L)H₂Cl (2) is formed. Reaction of 2 with H₃B·NMeH₂ returns 3, alongside the proposed formation of boronium [H₂B(NMeH₂)₂]Cl. Aided by isotopic labeling, Eyring analysis, and DFT calculations, a mechanism is proposed in which the cooperative "PNHP" ligand templates dehydrogenation, releasing H₂B═NMeH (ΔG^‡_calc = 19.6 kcal mol^-1). H₂B═NMeH is proposed to undergo rapid, low barrier, head-to-tail chain propagation for which 3 is the catalyst/initiator. A high molecular weight polymer is formed that is relatively insensitive to catalyst loading (M_n ∼71 000 g mol^-1; Đ, of ∼ 1.6). The molecular weight can be controlled using [H₂B(NMe₂H)₂]Cl as a chain transfer agent, M_n = 37 900-78 100 g mol^-1. This polymerization is suggested to arise from an ensemble of processes (catalyst speciation, dehydrogenation, propagation, chain transfer) that are geared around the concentration of H₃B·NMeH₂. TGA and DSC thermal analysis of polymer produced on scale (10 g, 0.01 mol % [1]Cl) show a processing window that allows for melt extrusion of polyaminoborane strands, as well as hot pressing, drop casting, and electrospray deposition. By variation of conditions in the latter, smooth or porous microstructured films or spherical polyaminoboranes beads (∼100 nm) result.

Molecular design and application of luminescent materials composed of group 13 elements with an aggregation-induced emission property

Complexation of π-conjugated ligands by metal or semimetal ions leads to the enhancement of the planarity and rigidity of π-conjugated systems. Boron, especially, has played a central role in the design of luminescent main-group complexes. However, these complexes still suffer the disadvantage of aggregation-caused quenching as well as typical organic fluorophores. It has recently been reported that some types of boron complexes exhibit the aggregation-induced emission (AIE) property. Moreover, AIE behavior from complexes and organometallic compounds composed of the other group 13 elements, such as aluminum and gallium, has emerged in this decade. These observations greatly encourage us to develop advanced functional materials based on the group 13 elements. Indeed, recent research has demonstrated that these classes of materials are potentially versatile scaffolds for constructing chromic luminophores, efficiently emissive π-conjugated polymers and so on. This review mainly describes AIE-active group 13 complexes with four-coordinate structures and their application as photo-functional materials. Proposed mechanisms of the origins of AIE behavior are briefly discussed.

Stability and Electronic Structure of Donor-Acceptor Stabilized Group 13/15 Oligomers

Electronic structures and thermodynamic characteristics of chain inorganic group 13-15 oligomers [H₂MEH₂]_n (M = B, Al, Ga, E = P, As; n = 4-15) are presented. Donor-acceptor interaction with both Lewis acids and Lewis bases effectively stabilizes chain isomers with respect to spontaneous cyclization and significantly changes their electronic structure.

Coordination-induced polymerization of P═C bonds leads to regular (P─C) n polycarbophosphanes

The replacement of carbon in (C─C) n chains of polyolefins by phosphorus leads to polycarbophosphanes (P─C) n , which may possess unique chemical and physical properties. However, macromolecules with a regular (P─C) n chain have never been unambiguously identified. Here, we demonstrate that addition polymerization, a general concept to polymerize olefins, can be extended to P═C double bonds. The polymerization of monomeric 2-phosphanaphthalenes is mediated by copper(I) halides and leads to polycarbophosphanes with an M n of 14 to 34 kDa. Each phosphorus is coordinated to Cu(I), which can be easily removed. Unlike long-term durable polyolefins, the metal-free polymers depolymerize rapidly back to monomers under sunlight or ultraviolet irradiation at λ = 365 nm. The monomers can be recycled for repolymerization, demonstrating a cradle-to-cradle life cycle for polycarbophosphanes.

Recent developments in stimuli-responsive luminescent polymers composed of boron compounds

This review summarizes recent developments in stimuli-responsive luminescent polymers with boron chromophores, including three- and four-coordinated compounds. Sensing mechanisms based on the features of boron and polymer structures are described.

Effect of the conjugation pathway on the electronic structures of p–π* conjugated polymers with fused borepin units

Borepin, an aromatic ring system with tricoordinate boron, was incorporated into p–π* conjugated polymers. The polymers exhibited characteristic optical responses upon the addition of cyanide anions in solution.

Hydrostibination of Alkynes: A Radical Mechanism*

The addition of Sb-H bonds to alkynes was reported recently as a new hydroelementation reaction that exclusively yields anti-Markovnikov Z-olefins from terminal acetylenes. We examine four possible mechanisms that are consistent with the observed stereochemical and regiochemical outcomes. A comprehensive analysis of solvent, substituent, isotope, additive, and temperature effects on hydrostibination reaction rates definitively refutes three ionic mechanisms involving closed-shell charged intermediates. Instead the data support a fourth pathway featuring open-shell neutral intermediates. Density-functional theory (DFT) calculations are consistent with this model, predicting an activation barrier that is in agreement with the experimental value (Eyring analysis) and a rate limiting step that is congruent with the experimental kinetic isotope effect. We therefore conclude that hydrostibination of arylacetylenes is initiated by the generation of stibinyl radicals, which then participate in a cycle featuring Sb^II and Sb^III intermediates to yield the observed Z-olefins as products. This mechanistic understanding will enable rational evolution of hydrostibination as a synthetic methodology.

A thermolytic route to a polysilyne

We report a safe and convenient method to prepare a new class of network polysilane, or polysilyne ([RSi]_n). Simple thermolysis of a readily accessible linear poly(phenylsilane), [PhSiH]_n, affords polysilyne [PhSi]_n with concomitant evolution of monosilanes. This new polymer shows a hyperbranched structure with unique features not observed in known polysilynes prepared via hazardous Wurtz coupling routes. Despite these differences, our soluble, yellow polysilyne exhibits some important properties associated with the traditional random network structure: it absorbs up to 400 nm in the UV spectrum, yet is stable to photolysis under inert atmosphere. This efficient new synthetic route opens the door to exciting applications for these hyperbranched polymers in materials and device technologies.

Formation and properties of phosphaquinomethane tungsten(0) complexes - isolation and conversion of primary radical coupling products

A rational approach to phosphaquinomethane metal(0) complexes, based on dearomatization of the phenylene unit in [W(CO)₅](R)P(Cl)-C₆H₅-CPh₂, is described, including theoretical studies on mechanisms and structures. Furthermore, the first phosphaquinone tungsten complex with reversible redox properties is reported thus illustrating the beneficial stabilization of ligation.

Selenium and Tellurium Derivatives of Corannulene: Serendipitous Discovery of a One-Dimensional Stereoregular Coordination Polymer Crystal Based on Te-O Backbone and Side-Chain Aromatic Array

Monobromo-, tetrabromo-, and pentachloro-corannulene are subjected to nucleophilic substitution reactions with tolyl selenide and phenyl telluride-based nucleophiles generated in situ from the corresponding dichalcogenides. In the case of selenium nucleophile, the reaction provides moderate yields (52-77 %) of the targeted corannulene selenoethers. A subsequent oxidation of the selenium atoms proceeds smoothly to furnish corannulene selenones in 81-93 % yield. In the case of tellurides, only monosubstitution of the corannulene scaffold could be achieved albeit with concomitant oxidation of the tellerium atom. Unexpectedly, this monotelluroxide derivative of corannulene (RR'Te=O, R=Ph, R'=corannulene) is observed to form a linear coordination polymer chain in the crystalline state. In this chain, Te-O constitutes the polymer backbone around which the aromatic groups (R and R') arrange as polymer side-chains. The polymer crystal is stabilized through intramolecular π-π stacking interactions of the side-chains and intermolecular hydrogen and halogen bonding interactions with the solvent (chloroform) molecules. Interestingly, each diad of the polymer chain is racemic. Therefore, in terms of stereoregularity, the polymer chain can be described as syndiotactic.