Green solvent free epoxidation of olefins by a heterogenised hydrazone-dioxidotungsten(vi) coordination compound

A new mononuclear tungsten coordination compound, [WO2L(CH3OH)] (1), was synthesized by the reaction of WCl6 and H2L (H2L = (E)-4-amino-N'-(5-bromo-2-hydroxybenzylidene)benzohydrazide) in methanol. Both the H2L and compound 1 were characterized by elemental analysis and UV-Vis, FT-IR and NMR spectroscopic methods. The molecular structure of compound 1 was also determined by single crystal X-ray analysis which confirmed the compound is a mononuclear coordination compound of cis-dioxidotungsten(vi) containing a free amine functionality on the ligand. Compound 1 was supported on propionyl chloride-functionalized silica gel by amidification reaction to obtain a heterogeneous catalyst. The obtained heterogeneous catalyst was characterized by FT-IR spectroscopy, thermal gravimetric analysis (TGA), diffuse-reflectance spectroscopy (DRS), X-ray diffraction analysis (XRD), energy-dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) and its catalytic activity was investigated in the epoxidation of olefins with hydrogen peroxide under solvent free conditions. The catalyst was successfully recovered several times and the recovered catalyst was also characterized by various methods including FT-IR, DRS, TGA, SEM and EDX analyses. The results indicated this heterogeneous catalytic system is an effective and selective catalyst for epoxidation of olefins and can be reused several times without significant change in its catalytic activity.

Synthesis and oxidation catalysis of a difluoride-incorporated polyoxovanadate and isolation of active vanadium alkylperoxo species

Haloperoxidase-mimetic peroxo-vanadium species on an inorganic support showed catalytic reactivity for the epoxidation and bromination of alkenes. The structures of both native and peroxo forms were determined via single-crystal X-ray analysis.

A {Ti6W4}-Cluster-Substituted Polyoxotungstate: Synthesis, Structure, and Catalytic Oxidation Properties

A novel Ti-W-O-cluster-substituted tungstoantimonate (TA), [H₂N(CH₃)₂]₃Na₄H₉[{Ti₆W₄O₁₈(OH)(H₂O)₃}(B-α-SbW₉O₃₃)₃]·20H₂O (1), has been made by hydrothermal reactions of trivacant [B-α-SbW₉O₃₃]^9- units, Ti⁴⁺ cations, and WO₄^2- anions in the presence of [H₂N(CH₃)₂]·Cl and structurally characterized. Intriguingly, the polyoxoanion of 1 is constructed from three [B-α-SbW₉O₃₃]^9- units and a previously unobserved decanuclear heterometallic Ti-W-O cluster [Ti₆W₄O₁₈(OH)(H₂O)₃]¹¹⁺ ({Ti₆W₄}) that is comprised of an octahedral [Ti₆WO₆(H₂O)₃]¹⁸⁺ cluster and an edge-sharing [W₃O₁₂(OH)]^7- fragment via six W-O-Ti/W linkers. Furthermore, studies on the catalytic oxidation properties reveal that 1 possesses good catalytic activity toward the oxidation reactions of various sulfides and cyclooctene based on the environmentally friendly oxidant H₂O₂.

A μ-AsO4-Bridging Hexadecanuclear Ni-Substituted Polyoxotungstate

A novel tetrahedral μ-AsO₄-bridging hexadecanuclear Ni-substituted silicotungstate (ST) Na₂₁H₁₀[(AsO₄){Ni₈(OH)₆(H₂O)₂(CO₃)₂(A-α-SiW₉O₃₄)₂}₂]·60H₂O (1) was made by the reactions of trivacant [A-α-SiW₉O₃₄]^10- ({SiW₉}) units with Ni²⁺ cations and Na₃AsO₄·12H₂O and characterized by IR spectrometry, elemental analysis, thermogravimetric analysis (TGA), and powder X-ray diffraction (PXRD). 1 contains a novel polyoxoanion [(AsO₄){Ni₈(OH)₆(H₂O)₂(CO₃)₂(A-α-SiW₉O₃₄)₂}₂]^31- built by four trivacant Keggin [A-α-SiW₉O₃₄]^10- fragments linked through an unprecedented [(AsO₄){Ni₈(OH)₆(H₂O)₂(CO₃)₂}₂]⁹⁺ cluster, where the tetrahedral AsO₄ acts as an exclusively μ₂-bridging unit to link multiple Ni centers; such a connection mode appears for the first time in polyoxometalate chemistry. Furthermore, the electrochemical and catalytic oxidation properties of compound 1 have been investigated.

Efficient epoxidation over dinuclear sites in titanium silicalite-1

Titanium silicalite-1 (TS-1) is a zeolitic material with MFI framework structure, in which 1 to 2 per cent of the silicon atoms are substituted for titanium atoms. It is widely used in industry owing to its ability to catalytically epoxidize olefins with hydrogen peroxide (H₂O₂), leaving only water as a byproduct^1,2; around one million tonnes of propylene oxide are produced each year using this process³. The catalytic properties of TS-1 are generally attributed to the presence of isolated Ti(IV) sites within the zeolite framework¹. However, despite almost 40 years of experimental and computational investigation^4-10, the structure of these active Ti(IV) sites is unconfirmed, owing to the challenges of fully characterizing TS-1. Here, using a combination of spectroscopy and microscopy, we characterize in detail a series of highly active and selective TS-1 propylene epoxidation catalysts with well dispersed titanium atoms. We find that, on contact with H₂¹⁷O₂, all samples exhibit a characteristic solid-state ¹⁷O nuclear magnetic resonance signature that is indicative of the formation of bridging peroxo species on dinuclear titanium sites. Further, density functional theory calculations indicate that cooperativity between two titanium atoms enables propylene epoxidation via a low-energy reaction pathway with a key oxygen-transfer transition state similar to that of olefin epoxidation by peracids. We therefore propose that dinuclear titanium sites, rather than isolated titanium atoms in the framework, explain the high efficiency of TS-1 in propylene epoxidation with H₂O₂. This revised view of the active-site structure may enable further optimization of TS-1 and the industrial epoxidation process.

Two unusual nanosized Nd3+-substituted selenotungstate aggregates simultaneously comprising lacunary Keggin and Dawson polyoxotungstate segments

Two unique nanosized Nd³⁺-substituted selenotungstates Na₉K₈{[W₃Nd₂(H₂O)₃(NO₃)O₆](B-α-SeW₉O₃₃)₂(α-Se₂W₁₄O₅₂)}·35H₂O (1) and [H₂N(CH₃)₂]₇H₉Na₄{[W₂Nd₂(H₂O)₈O₆(OH)₂(β-Se₂W₁₄O₅₂)][W₃Nd₂(H₂O)₆O₇(B-α-SeW₉O₃₃)₂]₂}·84H₂O (2) were prepared by reacting NaSeO₃, Na₂WO₄·2H₂O with Nd(NO₃)₃·6H₂O in aqueous solution by controlling different cations and pH values. 1 was synthesized at pH = 4.3 in the presence of KCl, whereas 2 was synthesized at pH = 3.0 in the presence of [H₂N(CH₃)₂]·Cl. The most striking structural feature of 1 and 2 is the coexistence of vacant Keggin and Dawson segments in the polyoxoanion, which is extremely rare in the field of polyoxometalate chemistry. The trimeric polyoxoanion of 1 can be perceived as a fusion of one α-type tetravacant Dawson [α-Se₂W₁₄O₅₂]^14- unit and two trivacant Keggin [B-α-SeW₉O₃₃]^8- segments sealing a trigonal bipyramid pentanuclear [W₃Nd₂(H₂O)₃(NO₃)O₆]¹¹⁺ cluster, while the pentameric polyoxoanion of 2 can be described as one β-type tetravacant Dawson [β-Se₂W₁₄O₅₂]^14- fragment and four trivacant Keggin [B-α-SeW₉O₃₃]^8- segments anchoring a saddle-shaped [W₈Nd₆(H₂O)₂₀O₂₀(OH)₂]²⁴⁺ cluster. In addition, the measurements of catalytic oxidation of aromatic thioethers show that 2 as a catalyst possesses extremely outstanding catalytic performance under mild reaction conditions.

Two Ni/Co-substituted sandwich-type germanomolybdates based on an unprecedented trivacant polyanion [α-GeMo10O36]8

Two Ni/Co-substituted sandwich-type germanomolybdates, {[M₃(NH₂-trz)₆(H₂O)₆][M₄(H₂O)₂(HGeMo₁₀O₃₆)₂]}·nH₂O (M = Ni²⁺ (1) and Co²⁺ (2), n = 10 (1) or 11 (2), NH₂-trz = 4-amino-1,2,4-triazole), have been obtained under hydrothermal conditions. 1 and 2 represent the first trivacant Keggin germanomolybdates involving unprecedented [α-GeMo₁₀O₃₆]^8- fragments and {M₃O₄} quasi-cubane building units. Both of them exhibit electrocatalytic behaviours for H₂O₂ reduction and photocatalytic properties for CO₂ conversion.

Wheel-Like Icosanuclear Peroxotitanate-A Stable Water-Soluble Catalyst for Oxygen Transfer Reactions

Water-soluble wheel-like icosanuclear peroxotitanate K₁₆[Ti₂₀(μ-O)₈(HO₂)₈(O₂)₁₂( R, R-tart)₁₂]·52H₂O (1) chelated by tartrate has been successfully isolated. As the largest peroxotitanate reported, {Ti₂₀} features 20 (hydro)peroxo groups with three kinds of coordination modes in μ-η¹:η², μ-η²:η², and η² fashions. The cluster is stable in solution and solid states. It has been tested for the catalytic oxidations of methyl phenyl sulfide and pyridine with hydrogen peroxide, respectively, which shows reversible elimination and the addition of peroxo groups. This provides a rare example of well-characterized titanium peroxide for homogeneous catalysis and mechanism research.

Ti(Phen)(OC2H5)2Cl2: a highly efficient pre-catalyst for selective oxidation of organic sulfides to sulfoxides by hydrogen peroxide

A structurally characterized titanium complex [Ti(Phen)(OC₂H₅)₂Cl₂] (Phen = 1,10-phenanthroline) is reported as a homogeneous pre-catalyst for the selective oxidation of organic sulfides to sulfoxides with a stoichiometric amount H₂O₂ in CH₃OH at room temperature.