Molybdenum-catalyzed hydrogenation of carbon dioxide, bicarbonate, and inorganic carbonates to formates

Herein, we report the hydrogenation of carbon dioxide to sodium formate catalyzed by low-valent molybdenum phosphine complexes. The 1,3-bis(diphenylphosphino)propane (DPPP)-based Mo complex was found to be an efficient catalyst in the presence of NaOH affording formate with a TON of 975 at 130 °C in THF/H2O after 24 h utilizing 40 bar (CO2 : H2 = 10 : 30) pressure. The complex was also active in the hydrogenation of sodium bicarbonate and inorganic carbonates to the corresponding formates. Mechanistic investigation revealed that the reaction proceeded via an intermediate formato complex.

Oxidative Decarbonylation of an Azacalixpyridine-Supported Mo(0)-Tricarbonyl to a Mo(VI)-Trioxo Complex with Dioxygen in Solution and on Au(111): Determination of Molecular Mechanism

The conversion of an azacalixpyridine-supported Mo(0) tricarbonyl into a Mo(VI) trioxo complex with dioxygen (O2) is investigated in homogeneous solution and in a molecular film adsorbed on Au(111) using a variety of spectroscopic and analytical methods. These studies in particular show that the dome-shaped carbonyl complex adsorbed on the metal surface has the ability to bind and activate gaseous oxygen, overcoming the so-called surface trans-effect. Furthermore, the rate of the conversion dramatically increases by irradiation with light. This observation is explained with the help of complementary DFT calculations and attributed to two different pathways, a thermal and a photochemical one. Based on the experimental and theoretical findings, a molecular mechanism for the conversion of the carbonyl to the oxo complex is derived.

Advances in Group VI Metal-Catalyzed Homogeneous Hydrogenation and Dehydrogenation Reactions

Transition metal-catalyzed homogeneous hydrogenation and dehydrogenation reactions for attaining plethora of organic scaffolds have evolved as a key domain of research in academia and industry. These protocols are atom-economic, greener, in line with the goal of sustainability, eventually pave the way for numerous novel environmentally benign methodologies. Appealing progress has been achieved in the realm of homogeneous catalysis utilizing noble metals. Owing to their high cost, less abundance along with toxicity issues led the scientific community to search for sustainable alternatives. In this context, earth- abundant base metals have gained substantial attention culminating enormous progress in recent years, predominantly with pincer-type complexes of nickel, cobalt, iron, and manganese. In this regard, group VI chromium, molybdenum and tungsten complexes have been overlooked and remain underdeveloped despite their earth-abundance and bio-compatibility. This review delineates a comprehensive overview in the arena of homogeneously catalysed (de)hydrogenation reactions using group VI base metals chromium, molybdenum, and tungsten till date. Various reactions have been described; hydrogenation, transfer hydrogenation, dehydrogenation, acceptorless dehydrogenative coupling, hydrogen auto transfer, along with their scope and brief mechanistic insights.

Activated Mn-MACHO Complexes Form Stable CO2 Adducts

Manganese(I) carbonyl complexes bearing a MACHO-type ligand (HN(CH2 CH2 PR2 )2 ) readily react in their amido form with CO2 to generate 4-membered {Mn-N-C-O} metallacycles. The stability of the adducts decreases with the steric demand of the R groups at phosphorous (R=isopropyl>adamantyl). The CO2 -adducts display generally a lower reactivity as compared to the parent amido complexes. These adducts can thus be interpretated as masked forms of the active amido catalysts and potentially play important roles as off-loop species or branching points in catalytic transformations of carbon dioxide.

Stronger Together! Mechanistic Investigation into Synergistic Effects during Homogeneous Carbon Dioxide Hydrogenation Using a Heterobimetallic Catalyst

A series of group 6 heterobimetallic complexes [M0;IrIII] (M = Cr, Mo, W) were synthesized and fully characterized, and the catalytic behavior was studied. The heterobimetallic complex [Mo0;IrIII] (C1) was by far the most active and has shown a considerable synergistic effect, with both metals actively participating in homogeneous carbon dioxide hydrogenation, leading to formate salts. Based on theoretical calculations, the synergistic interaction is due to Pauli repulsion, lowering the transition state and thus enabling higher catalytic activity. The mechanism of both the hydrogenation itself and the synergistic interaction was studied by NMR spectroscopy, kinetic measurements, and theoretical calculations. The homogeneous nature of the reaction was proven using in situ high-pressure (HP) NMR experiments. The same experiments also showed that the octahedral Mo(CO)3P3 moiety of the complex is stable under the reaction conditions. The hydride complex is the resting state because the hydride transfer is the rate-determining step. This is supported by kinetic measurements, in situ HP NMR experiments, and theoretical calculations and is in contrast to the monometallic IrIII counterpart of C1.

Diverse Cooperative Reactivity at a Square Planar Aluminium Complex and Catalytic Reduction of CO2

The use of a sterically demanding pincer ligand to prepare an unusual square planar aluminium complex is reported. Due to the constrained geometry imposed by the ligand scaffold, this four-coordinate aluminium centre remains Lewis acidic and reacts via differing metal-ligand cooperative pathways for activating ketones and CO₂ . It is also a rare example of a single-component aluminium system for the catalytic reduction of CO₂ to a methanol equivalent at room temperature.

Molybdenum(VI) Bis(imido) Complexes: From Frustrated Lewis Pairs to Weakly Coordinating Cations

Molybdenum(VI) bis(imido) complexes [Mo(NtBu)₂ (L^R )₂ ] (R=H 1 a; R=CF₃ 1 b) combined with B(C₆ F₅ )₃ (1 a/B(C₆ F₅ )₃ , 1 b/B(C₆ F₅ )₃ ) exhibit a frustrated Lewis pair (FLP) character that can heterolytically split H-H, Si-H and O-H bonds. Cleavage of H₂ and Et₃ SiH affords ion pairs [Mo(NtBu)(NHtBu)(L^R )₂ ][HB(C₆ F₅ )₃ ] (R=H 2 a; R=CF₃ 2 b) composed of a Mo(VI) amido imido cation and a hydridoborate anion, while reaction with H₂ O leads to [Mo(NtBu)(NHtBu)(L^R )₂ ][(HO)B(C₆ F₅ )₃ ] (R=H 3 a; R=CF₃ 3 b). Ion pairs 2 a and 2 b are catalysts for the hydrosilylation of aldehydes with triethylsilane, with 2 b being more active than 2 a. Mechanistic elucidation revealed insertion of the aldehyde into the B-H bond of [HB(C₆ F₅ )₃ ]^- . We were able to isolate and fully characterize, including by single-crystal X-ray diffraction analysis, the inserted products Mo(NtBu)(NHtBu)(L^R )₂ ][{PhCH₂ O}B(C₆ F₅ )₃ ] (R=H 4 a; R=CF₃ 4 b). Catalysis occurs at [HB(C₆ F₅ )₃ ]^- while [Mo(NtBu)(NHtBu)(L^R )₂ ]⁺ (R=H or CF₃ ) act as the cationic counterions. However, the striking difference in reactivity gives ample evidence that molybdenum cations behave as weakly coordinating cations (WCC).

Recent developments on the transformation of CO2 utilising ligand cooperation and related strategies

A portfolio of value-added chemicals, fuels and building block compounds can be envisioned from CO₂ on an industrial scale. The high kinetic and thermodynamic stabilities of CO₂, however, present a significant barrier to its utilisation as a C1 source. In this context, metal-ligand cooperation methodologies have emerged as one of the most dominant strategies for the transformation of the CO₂ molecule over the last decade or so. This review focuses on the advancements in CO₂ transformation using these cooperative methodologies. Different and well-studied ligand cooperation methodologies, such as dearomatisation-aromatisation type cooperation, bimetallic cooperation (M⋯M'; M' = main group or transition metal) and other related strategies are also discussed. Furthermore, the cooperative bond activations are subdivided based on the number of atoms connecting the reactive centre in the ligand framework (spacer/linker length) and the transition metal. Several similarities across these seemingly distinct cooperative methodologies are emphasised. Finally, this review brings out the challenges ahead in developing catalytic systems from these CO₂ transformations.

Influence of the Greater Protein Environment on the Electrostatic Potential in Metalloenzyme Active Sites: The Case of Formate Dehydrogenase

The Mo/W-containing metalloenzyme formate dehydrogenase (FDH) is an efficient and selective natural catalyst that reversibly converts CO₂ to formate under ambient conditions. In this study, we investigate the impact of the greater protein environment on the electrostatic potential (ESP) of the active site. To model the enzyme environment, we used a combination of classical molecular dynamics and multiscale quantum-mechanical (QM)/molecular-mechanical (MM) simulations. We leverage charge shift analysis to systematically construct QM regions and analyze the electronic environment of the active site by evaluating the degree of charge transfer between the core active site and the protein environment. The contribution of the terminal chalcogen ligand to the ESP of the metal center is substantial and dependent on the chalcogen identity, with similar, less negative ESPs for Se and S terminal chalcogens in comparison to O regardless of whether the metal is Mo or W. The orientation of the side chains and conformations of the cofactor also affect the ESP, highlighting the importance of sampling dynamic fluctuations in the protein. Overall, our observations suggest that the terminal chalcogen ligand identity plays an important role in the enzymatic activity of FDH, suggesting opportunities for a rational bioinspired catalyst design.

Low-Valent Molybdenum PNP Pincer Complexes as Catalysts for the Semihydrogenation of Alkynes

Low-valent molybdenum PNP pincer complexes were studied as catalysts for the semihydrogenation of alkynes. For that purpose, tBu-substituted PNP complexes PNP^tBuMo(CO)₂ (6a) and PNP^tBuMo(CO)₃ (6c) and the NNP complex NNP^iPrMo(CO)₂(PPh₃) ((rac)-7) were synthesized and characterized. By utilizing the cyclohexyl-substituted complex PNP^CyMo(CO)₂(CH₃CN) (5a), several diphenylacetylene derivatives are transformed to the corresponding (Z)-alkenes with good to very good diastereoselectivities (up to 91:9). Mechanistic experiments indicate an outer-sphere mechanism including metal–ligand cooperativity.

Group 6 transition metal-based molecular complexes for sustainable catalytic CO2 activation

CO2 activation is one of the key steps towards CO2 mitigation. In this context, the group 6 transition metal-based molecular catalysts can lead the way.

CO2 Cleavage Reaction Driven by Alkylidyne Complexes of Group 6 Metals and Uranium: A Density Functional Theory Study on Energetics, Reaction Mechanism, and Structural/Bonding Properties

Designing novel catalysts is essential for the efficient conversion of metal alkylidyne into metal oxo ketene complexes in the presence of CO₂, which to some extent resolves the environmental concerns of the ever-increasing carbon emission. In this regard, a series of metal alkylidyne complexes, [b-ONO]M≡CCH₃(THF)₂ ([b-ONO] = {(C₆H₄[C(CF₃)₂O])₂N}^3-; M = Cr, Mo, W, and U), have been comprehensively studied by relativistic density functional theory calculations. The calculated thermodynamics and kinetics unravel that the tungsten complex is capable of catalyzing the CO₂ cleavage reaction, agreeing with the experimental findings for its analogue. Interestingly, the uranium complex shows superior catalytic performance because of the associated considerably lower energy barrier and larger reaction rate constant. The M≡C moiety in the complexes turns out to be the active site for the [2 + 2] cyclic addition. In contrast, complexes of Cr and Mo could not offer good catalytic performance. Along the reaction coordinate, the M-C (M = Cr, Mo, W, and U) bond regularly transforms from triple to double to single bonds; concomitantly, the newly formed M-O in the product is identified to have a triple-bond character. The catalytic reactions have been extensively explained and addressed by geometric/electronic structures and bonding analyses.

Selective C-alkylation Between Alcohols Catalyzed by N-Heterocyclic Carbene Molybdenum

The first implementation of a molybdenum complex with an easily accessible bis-N-heterocyclic carbene ligand to catalyze β-alkylation of secondary alcohols via borrowing-hydrogen (BH) strategy using alcohols as alkylating agents is reported. Remarkably high activity, excellent selectivity, and broad substrate scope compatibility with advantages of catalyst usage low to 0.5 mol%, a catalytic amount of NaOH as the base, and H₂ O as the by-product are demonstrated in this green and step-economical protocol. Mechanistic studies indicate a plausible outer-sphere mechanism in which the alcohol dehydrogenation is the rate-determining step.

HCOOH disproportionation to MeOH promoted by molybdenum PNP complexes

Molybdenum(0) complexes with aliphatic aminophosphine pincer ligands have been prepared which are competent for the disproportionation of formic acid, thus representing the first example so far reported of non-noble metal species to catalytically promote such transformation. In general, formic acid disproportionation allows for an alternative access to methyl formate and methanol from renewable resources. MeOH selectivity up to 30% with a TON of 57 could be achieved while operating at atmospheric pressure. Selectivity (37%) and catalyst performance (TON = 69) could be further enhanced when the reaction was performed under hydrogen pressure (60 bars). A plausible mechanism based on experimental evidence is proposed.

Mo(0) complexes with aliphatic PNP-pincer ligands enable the first example of non-noble metal catalyzed formic acid disproportionation leading to methanol with a selectivity of up to 37% and a turnover number up to 69.

Molybdenum-Containing Metalloenzymes and Synthetic Catalysts for Conversion of Small Molecules

The energy deficiency and environmental problems have motivated researchers to develop energy conversion systems into a sustainable pathway, and the development of catalysts holds the center of the research endeavors. Natural catalysts such as metalloenzymes have maintained energy cycles on Earth, thus proving themselves the optimal catalysts. In the previous research results, the structural and functional analogs of enzymes and nano-sized electrocatalysts have shown promising activities in energy conversion reactions. Mo ion plays essential roles in natural and artificial catalysts, and the unique electrochemical properties render its versatile utilization as an electrocatalyst. In this review paper, we show the current understandings of the Mo-enzyme active sites and the recent advances in the synthesis of Mo-catalysts aiming for high-performing catalysts.

Recent Advances in the Chemistry of Metal Carbamates

Following a related review dating back to 2003, the present review discusses in detail the various synthetic, structural and reactivity aspects of metal species containing one or more carbamato ligands, representing a large family of compounds across all the periodic table. A preliminary overview is provided on the reactivity of carbon dioxide with amines, and emphasis is given to recent findings concerning applications in various fields.

The potential of d6 non-noble metal NHC catalysts for carbon dioxide hydrogenation: group and row effects

Group VIB NHC-complexes as promising non-noble catalysts for CO₂ hydrogenation benefiting by the weak electronegativity and low oxidation state.

Highly selective hydrogenation of amides catalysed by a molybdenum pincer complex: scope and mechanism

A series of molybdenum pincer complexes has been shown for the first time to be active in the catalytic hydrogenation of amides.

A series of molybdenum pincer complexes has been shown for the first time to be active in the catalytic hydrogenation of amides. Among the tested catalysts, Mo-1a proved to be particularly well suited for the selective C–N hydrogenolysis of N-methylated formanilides. Notably, high chemoselectivity was observed in the presence of certain reducible groups including even other amides. The general catalytic performance as well as selectivity issues could be rationalized taking an anionic Mo(0) as the active species. The interplay between the amide C Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> O reduction and the catalyst poisoning by primary amides accounts for the selective hydrogenation of N-methylated formanilides. The catalyst resting state was found to be a Mo–alkoxo complex formed by reaction with the alcohol product. This species plays two opposed roles – it facilitates the protolytic cleavage of the C–N bond but it encumbers the activation of hydrogen.

Bio-mimetic self-assembled computationally designed catalysts of Mo and W for hydrogenation of CO2/dehydrogenation of HCOOH inspired by the active site of formate dehydrogenase

Density functional theory modelling has been used to design Mo and W-based catalysts MoIII(tBu)(CO) and WIII(tBu)(CO) for CO2 hydrogenation and HCOOH dehydrogenation, which are bio-mimics of the active site of formate dehydrogenase. Based on DFT calculations, the molybdenum and tungsten based complexes are good catalysts in the +3 oxidation state for CO2 hydrogenation with free energies of 24.03 and 21.31 kcal mol-1, respectively. Such a low barrier indicates that our newly designed Mo and W-based complexes are very efficient for CO2 hydrogenation or HCOOH dehydrogenation catalysis. Overall, our computational results provide in depth insights that can serve as a great tool for the design and development of new and efficient molybdenum and tungsten based catalysts for CO2 hydrogenation or HCOOH dehydrogenation.

Phosphine-free ruthenium NCN-ligand complexes and their use in catalytic CO2 hydrogenation

This work investigates the hydrogenation of carbon dioxide to formate catalysed by the phosphine-free Ru complexes Ru(OtBu)(κ³-NCN)(^tBubpy) and RuH(OtBu)(κ²-NCN)(^tBubpy) (OtBu = tert-butoxide, κ²-NCN = 1,3-di(2-methylpyridyl)-4,5-diphenyl-1H-imidazol-2-ylidene, where one pyridyl moiety is not coordinated to Ru, ^tBubpy = 4,4'-di-tert-butyl-2,2'-dipyridyl). A catalytic cycle is proposed for this reaction, supported by computational studies and the characterization of the hydride and the formate intermediates proposed to be involved. Modest catalytic turnovers are demonstrated at relatively low pressures and temperatures. The proposed rate determining step is heterolytic H₂ splitting to regenerate the Ru-H complex, which has an estimated hydricity of approx. 27 kcal mol^-1. The κ²-NCN ligand in the hydride complex undergoes a variety of dynamic processes as detected by EXSY spectroscopy including a pyridyl "roll-over" carbon-hydrogen - ruthenium hydride exchange, possibly occuring via a Perutz-Sabo-Etienne CAM mechanism.

Reactivity of a biomimetic W(iv) bis-dithiolene complex with CO2 leading to formate production and structural rearrangement

A mononuclear W(iv) bis-dithiolene complex reduces CO₂ to formate while generating a dinuclear W(v) complex.

CO2 activation by manganese pincer complexes through different modes of metal–ligand cooperation

Activation of CO₂ by manganese pincer complexes using two different modes of metal–ligand cooperativity (amido/amino mode and dearomatization/aromatization mode) is reported.

Exploring the mechanisms of aqueous methanol dehydrogenation catalyzed by defined PNP Mn and Re pincer complexes under base-free as well as strong base conditions

The mechanisms of aqueous methanol dehydrogenation reaction catalyzed by defined Mn and Re pincer complexes under different conditions were computed.

Hydrogenation of phenyl-substituted CN, CN,CC, CC and CO functional groups by Cr, Mo and W PNP pincer complexes – a DFT study

The hydrogenation of phenyl-substituted CN, CN, CC, CC and CO functional groups catalyzed by PNP pincer amido M(NO)(CO)(PNP) and amino ^HM(NO)(CO)(PN^HP) complexes [M = Cr, Mo and W; PNP = N(CH₂CH₂P(isopropyl)₂)₂] has been computed.

Brønsted-Lowry Acid Strength of Metal Hydride and Dihydrogen Complexes

Transition metal hydride complexes are usually amphoteric, not only acting as hydride donors, but also as Brønsted-Lowry acids. A simple additive ligand acidity constant equation (LAC for short) allows the estimation of the acid dissociation constant Ka(LAC) of diamagnetic transition metal hydride and dihydrogen complexes. It is remarkably successful in systematizing diverse reports of over 450 reactions of acids with metal complexes and bases with metal hydrides and dihydrogen complexes, including catalytic cycles where these reactions are proposed or observed. There are links between pKa(LAC) and pKa(THF), pKa(DCM), pKa(MeCN) for neutral and cationic acids. For the groups from chromium to nickel, tables are provided that order the acidity of metal hydride and dihydrogen complexes from most acidic (pKa(LAC) -18) to least acidic (pKa(LAC) 50). Figures are constructed showing metal acids above the solvent pKa scales and organic acids below to summarize a large amount of information. Acid-base features are analyzed for catalysts from chromium to gold for ionic hydrogenations, bifunctional catalysts for hydrogen oxidation and evolution electrocatalysis, H/D exchange, olefin hydrogenation and isomerization, hydrogenation of ketones, aldehydes, imines, and carbon dioxide, hydrogenases and their model complexes, and palladium catalysts with hydride intermediates.

Iron catalyzed CO2 hydrogenation to formate enhanced by Lewis acid co-catalysts

A family of iron(ii) carbonyl hydride complexes supported by either a bifunctional PNP ligand containing a secondary amine, or a PNP ligand with a tertiary amine that prevents metal-ligand cooperativity, were found to promote the catalytic hydrogenation of CO2 to formate in the presence of Brønsted base. In both cases a remarkable enhancement in catalytic activity was observed upon the addition of Lewis acid (LA) co-catalysts. For the secondary amine supported system, turnover numbers of approximately 9000 for formate production were achieved, while for catalysts supported by the tertiary amine ligand, nearly 60 000 turnovers were observed; the highest activity reported for an earth abundant catalyst to date. The LA co-catalysts raise the turnover number by more than an order of magnitude in each case. In the secondary amine system, mechanistic investigations implicated the LA in disrupting an intramolecular hydrogen bond between the PNP ligand N-H moiety and the carbonyl oxygen of a formate ligand in the catalytic resting state. This destabilization of the iron-bound formate accelerates product extrusion, the rate-limiting step in catalysis. In systems supported by ligands with the tertiary amine, it was demonstrated that the LA enhancement originates from cation assisted substitution of formate for dihydrogen during the slow step in catalysis.