A facile ultrasonication assisted method for Fe3O4@SiO2-Ag nanospheres with excellent antibacterial activity

Assessment of the catalytic and biological potential of yttrium and samarium-modified copper ferrite nanomaterials

The present study reports the preparation of crystalline and nanosized copper ferrite (CuFe2O4), Y3+ substituted CuFe2O4 (CuFe1.95Y0.05O4), and Sm3+ substituted CuFe2O4 (CuFe1.95Sm0.05O4) using a simple co-precipitation method. The XRD analysis confirmed the formation of the cubic spinel phase, while XPS studies validated the presence of Cu and Fe in 2+ and 3+ oxidation states respectively. Transmission electron microscopy (TEM) analysis revealed the nanoparticles with a diameter in the range of 10-60 nm. The introduction of fractional amounts of Y3+ and Sm3+ ions in the CuFe2O4 lattice enhanced the reduction of 4-nitrophenol, attributed to decreased particle size facilitating the reduction process. In the case of antimicrobial activity, Candida albican was found to be maximally sensitive to CuFe2O4 and CuFe1.95Y0.05O4, while Pseudomonas aeruginosa was inhibited by CuFe1.95Sm0.05O4. Moreover, a maximum of 61.9 ± 1.91 % anti-Pseudomonas biofilm activity and 75.7 ± 1.28 % DPPH radical scavenging activity was observed for CuFe1.95Y0.05O4 at 200 μg/ml concentration. The improvement in biological activities was attributed to the reduced particle size, crystal structure modification, and increased stability of the CuFe2O4 lattice with substitution. The enhancement in catalytic and biological performance highlighted the effectiveness of minimal Y3+ and Sm3+ concentrations in modulating the properties of CuFe2O4 nanomaterials.

Thermally Stable Magneto-Plasmonic Nanoparticles for SERS with Tunable Plasmon Resonance

Bifunctional magneto-plasmonic nanoparticles that exhibit synergistically magnetic and plasmonic properties are advanced substrates for surface-enhanced Raman spectroscopy (SERS) because of their excellent controllability and improved detection potentiality. In this study, composite magneto-plasmonic nanoparticles (Fe3O4@AgNPs) were formed by mixing colloid solutions of 50 nm-sized magnetite nanoparticles with 13 nm-sized silver nanoparticles. After drying of the layer of composite Fe3O4@AgNPs under a strong magnetic field, they outperformed the conventional silver nanoparticles during SERS measurements in terms of signal intensity, spot-to-spot, and sample-to-sample reproducibility. The SERS enhancement factor of Fe3O4@AgNP-adsorbed 4-mercaptobenzoic acid (4-MBA) was estimated to be 3.1 × 107 for a 633 nm excitation. In addition, we show that simply by changing the initial volumes of the colloid solutions, it is possible to control the average density of the silver nanoparticles, which are attached to a single magnetite nanoparticle. UV-Vis and SERS data revealed a possibility to tune the plasmonic resonance frequency of Fe3O4@AgNPs. In this research, the plasmon resonance maximum varied from 470 to 800 nm, suggesting the possibility to choose the most suitable nanoparticle composition for the particular SERS experiment design. We emphasize the increased thermal stability of composite nanoparticles under 532 and 442 nm laser light irradiation compared to that of bare Fe3O4 nanoparticles. The Fe3O4@AgNPs were further characterized by XRD, TEM, and magnetization measurements.

Facile strategy for the synthesis of silver nanoparticles on magnetic Fe3O4@C core-shell nanocomposites and their application in catalytic reduction

The integration of noble metal nanoparticles (NPs) on magnetic hollow structures is of particular importance for high catalytic activity, while the magnetic property is useful for the recovery of the composites. Herein, we prepared Ag NP decorated Fe₃O₄@C hollow magnetic microtubes by a facile and controllable approach. To this end, tannic acid-ferric ion (TA-Fe) first polymerized in situ on the MoO₃@FeOOH microrods and served as a reducing/stabilizing agent to integrate Ag NPs with high coverage. Moreover, no extra reductant was required owing to the reducibility of TA for the formation of FeOOH@TA-Fe/Ag microtubes. After thermal treatment under an N₂ atmosphere, hollow Fe₃O₄@C-Ag microtubes are obtained with a high surface area and excellent magnetism. Remarkable catalytic activity was achieved towards the reduction of 4-nitrophenol (4-NP) owing to the high coverage of Ag NPs on the tube-like structure, while the composite was easily collected with an external magnet. The integration of Ag NPs and the magnetic hollow structure provides a great platform for designing hybrid catalysts with high efficiency and recoverability.

Facile synthesis of silver nanocatalyst decorated Fe3O4@PDA core–shell nanoparticles with enhanced catalytic properties and selectivity

In this work, we have successfully prepared core–shell nanoparticles (Fe₃O₄@PDA) wrapped with Ag using a simple and green synthesis method. Without an external reducing agent, silver nanoparticles (Ag NPs) with good dispersibility were directly reduced and deposited on a polydopamine (PDA) layer. Fe₃O₄@PDA@Ag showed excellent catalytic activity and recyclability for 4-nitrophenol, and also exhibited good catalytic selectivity for organic dyes (MO and MB). This simple and green synthesis method will provide a platform for other catalytic applications.

In this work, we have successfully prepared core–shell nanoparticles (Fe₃O₄@PDA) wrapped with Ag using a simple and green synthesis method.

Magnetic nanoprobes for rapid detection of copper ion in aqueous environment by surface-enhanced Raman spectroscopy

Excessive copper ions in drinking water could cause serious health issues, such as gastrointestinal disorders and cirrhosis, and they are associated with Alzheimer's disease. ICP-OES, ICP-MS, and AAS are the most common methods of copper ion determination. However, the high cost of sample preparation and labor limit the possibility of on-site detection. In this study, rapid monitoring of copper ion through the SERS technique was evaluated. Fe₃O₄@SiO₂–Ag–4MBA nanoparticles were investigated as SERS-activated magnetic nanoprobes. These magnetic nanoprobes underwent superparamagnetism for rapid aggregation in seconds and provided selectivity in sensing copper ions. According to the dose–response curve of the SERS spectra, the limit of detection (LOD) was 0.421 ppm and the dynamic range was from 0.5 to 20 ppm in the presence of other metal ions. Copper ion detection through SERS was highly correlated with ICP-OES (R² = 0.95, slope = 0.974). These results demonstrate that magnetic nanoprobes may ultimately be used in a platform for on-site detection.

Magnetic SERS probes can rapidly detect copper ions within high precision and accuracy.

One-step method to prepare core-shell magnetic nanocomposite encapsulating silver nanoparticles with superior catalytic and antibacterial activity

A facile one-step method for synthesis of magnetic core-shell nanocomposite composed of h-Fe₃O₄ (hollow Fe₃O₄) core and stable PDA (polydopamine) shell with functional Ag NPs (silver nanoparticles) evenly distributed between them is developed. The h-Fe₃O₄@Ag/PDA nanocomposite showed excellent catalytic activity in the reaction for reducing azo dyes (methyl orange, methylene blue, and congo red), and the ratios of k values to the weight of h-Fe₃O₄@Ag/PDA were calculated to be 0.302, 0.0545, and 0.895 min^-1 mg^-1, respectively. Besides, the h-Fe₃O₄@Ag/PDA nanocomposite also exhibited good antibacterial activity in the experiment of culturing Bacillus subtilis, and the MIC (minimum inhibitory concentration) was as low as 12.5 μg/mL. Because the Ag NPs will not be leached in the solution under the protection of the PDA shell, the catalytic and antibacterial activities of h-Fe₃O₄@Ag/PDA nanocomposite could maintain more than 90% after five cycles. Intriguingly, this simple synthetic method can be extended to fabricate different multifunctional nanocomposites such as the spherical SiO₂@Ag/PDA and rod-like Fe₂O₃@Ag/PDA. Overall, the facile fabrication process, the superior catalytic and antibacterial activity, and the excellent stability, endow the h-Fe₃O₄@Ag/PDA to be a promising nanocomposite.

Hybrid Polydopamine/Ag Shell-Encapsulated Magnetic Fe3O4 Nanosphere with High Antibacterial Activity

The bacteria, which usually contaminate water environment, often cause terrible infectious diseases thus seriously threaten people's health. To meet the increasing requirement of the public health care, an easily separable nanomaterial with sustainable anti-bacteria performance is required. This work reports a Fe₃O₄@PDA/Ag/PDA core-shell nanosphere in which the Ag nanocrystals immobilized on the magnetic carrier are protected by an external polydopamine (PDA) layer. The magnetic hybrid nanospheres are constructed by a tunable coating method and the particle parameters can be effectively controlled by the experimental condition. The antibacterial potential of the nanospheres is evaluable by using the Staphylococcus aureus and Escherichia coli as the models. The results indicate the Fe₃O₄@PDA/Ag/PDA core-shell nanospheres have a high antibacterial performance by measuring the minimum inhibitory concentration and the minimum bactericidal concentration. Finally, the product is expected to have a sustainable activity because the protecting PDA layer reduce the releasing rate of the Ag⁺ ions and the materials can be magnetically recovered from the media after the disinfection procedure.

Potential Toxicity of Iron Oxide Magnetic Nanoparticles: A Review

The noteworthy intensification in the development of nanotechnology has led to the development of various types of nanoparticles. The diverse applications of these nanoparticles make them desirable candidate for areas such as drug delivery, coasmetics, medicine, electronics, and contrast agents for magnetic resonance imaging (MRI) and so on. Iron oxide magnetic nanoparticles are a branch of nanoparticles which is specifically being considered as a contrast agent for MRI as well as targeted drug delivery vehicles, angiogenic therapy and chemotherapy as small size gives them advantage to travel intravascular or intracavity actively for drug delivery. Besides the mentioned advantages, the toxicity of the iron oxide magnetic nanoparticles is still less explored. For in vivo applications magnetic nanoparticles should be nontoxic and compatible with the body fluids. These particles tend to degrade in the body hence there is a need to understand the toxicity of the particles as whole and degraded products interacting within the body. Some nanoparticles have demonstrated toxic effects such inflammation, ulceration, and decreases in growth rate, decline in viability and triggering of neurobehavioral alterations in plants and cell lines as well as in animal models. The cause of nanoparticles' toxicity is attributed to their specific characteristics of great surface to volume ratio, chemical composition, size, and dosage, retention in body, immunogenicity, organ specific toxicity, breakdown and elimination from the body. In the current review paper, we aim to sum up the current knowledge on the toxic effects of different magnetic nanoparticles on cell lines, marine organisms and rodents. We believe that the comprehensive data can provide significant study parameters and recent developments in the field. Thereafter, collecting profound knowledge on the background of the subject matter, will contribute to drive research in this field in a new sustainable direction.

Antibacterial and biodegradable tissue nano-adhesives for rapid wound closure

BACKGROUND

Although various organic tissue adhesives designed to facilitate would healing are gaining popularity in diverse clinical applications, they present significant inherent limitations, such as rejection, infections, toxicity and/or excessive swelling. It is highly desirable to develop efficient, biocompatible and anti-bacterial tissue adhesives for skin wound healing.

PURPOSE

Inspired by the fact that inorganic nanoparticles can directly glue tissues through the "nanobridging effect", herein disulfide bond-bridged nanosilver-decorated mesoporous silica nanoparticles (Ag-MSNs) was constructed as an effective and safe tissue adhesive with antibacterial and degradable properties for wound closure and healing.

MATERIALS AND METHODS

Ag-MSNs was fabricated by controlled reduce of ultrasmall nanosilvers onto the both surface and large pore of biodegradable MSNs. The obtained MSNs were characterized by transmission electron microscopy, Fourier transform infrared spectroscopy, energy-dispersive X-ray spectroscopy, and measurement of size distribution, zeta potential, and mesopore properties. Furthermore, adhesion strength test, anti-bacterial assessment, mouse skin wound model, and MTT assays were used to investigate the tissue adhesive property, antibacterial effect, biodegradability and biocompatibility of the Ag-MSNs.

RESULTS

Ag-MSNs exhibited not only strong adhesive properties but also excellent antibacterial activities than that of MSNs. Importantly, this antibacterial nano-adhesive achieved rapid and efficient closure and healing of wounds in comparison to sutures or MSNs in a mouse skin wound model. Furthermore, Ag-MSNs with fast degradable behavior caused little cellular toxicity and even less systemic toxicity during wound healing.

CONCLUSION

Our findings suggest that biodegradable Ag-MSNs can be employed as the next generation of nano-adhesives for rapid wound closure and aesthetic wound healing.

From Nano to Micro: using nanotechnology to combat microorganisms and their multidrug resistance

The spread of antibiotic resistance and increasing prevalence of biofilm-associated infections is driving demand for new means to treat bacterial infection. Nanotechnology provides an innovative platform for addressing this challenge, with potential to manage even infections involving multidrug-resistant (MDR) bacteria. The current review summarizes recent progress over the last 2 years in the field of antibacterial nanodrugs, and describes their unique properties, mode of action and activity against MDR bacteria and biofilms. Biocompatibility and commercialization are also discussed. As opposed to the more common division of nanoparticles (NPs) into organic- and inorganic-based materials, this review classifies NPs into two functional categories. The first includes NPs exhibiting intrinsic antibacterial properties and the second is devoted to NPs serving as a cargo for delivering antibacterial agents. Antibacterial nanomaterials used to decorate medical devices and implants are reviewed here as well.

Facile loading of Ag nanoparticles onto magnetic microsphere by the aid of a tannic acid-Metal polymer layer to synthesize magnetic disinfectant with high antibacterial activity

In this article, Ag nanoparticles (NPs) were easily loaded onto magnetic material through a tannic acid-metal polymer (PTA) intermedia layer to synthesize Fe₃O₄@PTA@Ag magnetic composite and the potential application as bactericidal agent for water disinfection was investigated. The as-obtained composite, with a Fe₃O₄ core of 150nm, has plenty of Ag NPs of 15nm adhered onto the PTA layer outside the core. The PTA layer, like the famous polydopamine complex, possesses excellent adhesive capacity to load more Ag NPs tightly and has specific antibacterial activity due to the numerous catechol groups. Therefore, remarkable bactericidal activity was achieved and 31.25mgL^-1 of Fe₃O₄@PTA@Ag disinfectant could inactivate more than 99% of the tested strains within 60min. At the same time, the catechol groups also endow the PTA layer with reduction ability so that additional reductant is unnecessary during the formation of Ag NPs and the PTA complex can be fabricated much more rapidly. As a result, the magnetic composite can be synthesized simply with less cost. Moreover, the composite has a high magnetic saturation value of 55.47emug^-1 owing to the Fe₃O₄ core and the magnetic separation ability can play an important role in the recovery of the disinfectant.

Synergistic bactericidal activity of chlorhexidine-loaded, silver-decorated mesoporous silica nanoparticles

Combination of chlorhexidine (CHX) and silver ions could engender synergistic bactericidal effect and improve the bactericidal efficacy. It is highly desired to develop an efficient carrier for the antiseptics codelivery targeting infection foci with acidic microenvironment. In this work, monodisperse mesoporous silica nanoparticle (MSN) nanospheres were successfully developed as an ideal carrier for CHX and nanosilver codelivery through a facile and environmentally friendly method. The CHX-loaded, silver-decorated mesoporous silica nanoparticles (Ag-MSNs@CHX) exhibited a pH-responsive release manner of CHX and silver ions simultaneously, leading to synergistically antibacterial effect against both gram-positive Staphylococcus aureus and gram-negative Escherichia coli. Moreover, the effective antibacterial concentration of Ag-MSNs@CHX showed less cytotoxicity on normal cells. Given their synergistically bactericidal ability and good biocompatibility, these nanoantiseptics might have effective and broad clinical applications for bacterial infections.

Fe3O4@Resorcinol-Formaldehyde Resin/Cu2O Composite Microstructures: Solution-Phase Construction, Magnetic Performance, and Applications in Antibacterial and Catalytic Fields

Multifunctional Fe₃O₄@resorcinol-formaldehyde resin/Cu₂O composite microstructures (denoted as Fe₃O₄@RF/Cu₂O microstructures) were successfully constructed via a simple wet chemical route that has not been reported so far in the literature. The as-obtained Fe₃O₄@RF/Cu₂O microstructures were characterized using field-emission scanning electron microscopy, (high-resolution) transmission electron microscopy, selected-area electron diffraction, X-ray diffraction, and X-ray energy dispersive spectroscopy. The investigations showed that the as-obtained microstructures presented not only excellent antibacterial activity to Staphylococcus aureus (Gram-positive bacteria) and Escherichia coli (Gram-negative bacteria) but also highly efficient catalytic ability for the reduction of 4-nitrophenol (4-NP) in a solution with excess NaBH₄. Owing to the presence of Fe₃O₄, the antibacterial reagent and the catalyst could be readily collected from the mixed systems under the assistance of an external magnetic field. It was found that the as-obtained microstructures displayed good cycling stability in antibacterial and catalytic applications. Fe₃O₄@RF/Cu₂O microstructures still retained more than 87% of the antibacterial efficiency after 5 cycles and 89% of the catalytic efficiency after 10 cycles.

Vancomycin-modified Fe3O4@SiO2@Ag microflowers as effective antimicrobial agents

Nanomaterials combined with antibiotics exhibit synergistic effects and have gained increasing interest as promising antimicrobial agents. In this study, vancomycin-modified magnetic-based silver microflowers (Van/Fe3O4@SiO2@Ag microflowers) were rationally designed and prepared to achieve strong bactericidal ability, a wide antimicrobial spectrum, and good recyclability. High-performance Fe3O4@SiO2@Ag microflowers served as a multifunction-supporting matrix and exhibited sufficient magnetic response property due to their 200 nm Fe3O4 core. The microflowers also possessed a highly branched flower-like Ag shell that provided a large surface area for effective Ag ion release and bacterial contact. The modified-vancomycin layer was effectively bound to the cell wall of bacteria to increase the permeability of the cell membrane and facilitate the entry of the Ag ions into the bacterium, resulting in cell death. As such, the fabricated Van/Fe3O4@SiO2@Ag microflowers were predicted to be an effective and environment-friendly antibacterial agent. This hypothesis was verified through sterilization of Gram-negative Escherichia coli and Gram-positive methicillin-resistant Staphylococcus aureus, with minimum inhibitory concentrations of 10 and 20 μg mL-1, respectively. The microflowers also showed enhanced effect compared with bare Fe3O4@SiO2@Ag microflowers and free-form vancomycin, confirming the synergistic effects of the combination of the two components. Moreover, the antimicrobial effect was maintained at more than 90% after five cycling assays, indicating the high stability of the product. These findings reveal that Van/Fe3O4@SiO2@Ag microflowers exhibit promising applications in the antibacterial fields.