Chemical and Electrochemical Reductions of Monoiminoacenaphthenes

Redox properties of monoiminoacenaphthenes (MIANs) were studied using various electrochemical techniques. The potential values obtained were used for calculating the electrochemical gap value and corresponding frontier orbital difference energy. The first-peak-potential reduction of the MIANs was performed. As a result of controlled potential electrolysis, two-electron one-proton addition products were obtained. Additionally, the MIANs were exposed to one-electron chemical reduction by sodium and NaBH₄. Structures of three new sodium complexes, three products of electrochemical reduction, and one product of the reduction by NaBH₄ were studied using single-crystal X-ray diffraction. The MIANs reduced electrochemically by NaBH₄ represent salts, in which the protonated MIAN skeleton acts as an anion and Bu₄N⁺ or Na⁺ as a cation. In the case of sodium complexes, the anion radicals of MIANs are coordinated with sodium cations into tetranuclear complexes. The photophysical and electrochemical properties of all reduced MIAN products, as well as neutral forms, were studied both experimentally and quantum-chemically.

BIAN-Aluminium-Catalysed Imine Hydrogenation

Hydrogenations have been dominated by transition metal catalysis, while the use of more abundant and inexpensive main group metal catalysts has remained a great challenge. Here, a bimetallic Li/Al dihydride was successfully applied to catalytic hydrogenations of imines. The catalyst [(DippBIAN)Al(μ-H)2Li(OEt2)2] was easily prepared from the 2e-reduced BIAN derivative and LiAlH4.

Novel Oxidovanadium Complexes with Redox-Active R-Mian and R-Bian Ligands: Synthesis, Structure, Redox and Catalytic Properties

A new monoiminoacenaphthenone 3,5-(CF₃)₂C₆H₃-mian (complex 2) was synthesized and further exploited, along with the already known monoiminoacenaphthenone dpp-mian, to obtain oxidovanadium(IV) complexes [VOCl₂(dpp-mian)(CH₃CN)] (3) and [VOCl(3,5-(CF₃)₂C₆H₃-bian)(H₂O)][VOCl₃(3,5-(CF₃)₂C₆H₃-bian)]·2.85DME (4) from [VOCl₂(CH₃CN)₂(H₂O)] (1) or [VCl₃(THF)₃]. The structure of all compounds was determined using X-ray structural analysis. The vanadium atom in these structures has an octahedral coordination environment. Complex 4 has an unexpected structure. Firstly, it contains 3,5-(CF₃)₂C₆H₃-bian instead of 3,5-(CF₃)₂C₆H₃-mian. Secondly, it has a binuclear structure, in contrast to 3, in which two oxovanadium parts are linked to each other through V=O···V interaction. This interaction is non-covalent in origin, according to DFT calculations. In structures 2 and 3, non-covalent π-π staking interactions between acenaphthene moieties of the neighboring molecules (distances are 3.36–3.40 Å) with an estimated energy of 3 kcal/mol were also found. The redox properties of the obtained compounds were studied using cyclic voltammetry in solution. In all cases, the reduction processes initiated by the redox-active nature of the mian or bian ligand were identified. The paramagnetic nature of complexes 3 and 4 has been proven by EPR spectroscopy. Complexes 3 and 4 exhibited high catalytic activity in the oxidation of alkanes and alcohols with peroxides. The yields of products of cyclohexane oxidation were 43% (complex 3) and 27% (complex 4). Based on the data regarding the study of regio- and bond-selectivity, it was concluded that hydroxyl radicals play the most crucial role in the reaction. The initial products in the reactions with alkanes are alkyl hydroperoxides, which are easily reduced to their corresponding alcohols by the action of triphenylphosphine (PPh₃). According to the DFT calculations, the difference in the catalytic activity of 3 and 4 is most likely associated with a different mechanism for the generation of ^●OH radicals. For complex 4 with electron-withdrawing CF₃ substituents at the diimine ligand, an alternative mechanism, different from Fenton’s and involving a redox-active ligand, is assumed.

One-Electron Reduction of 2-Mono(2,6-diisopropylphenylimino)acenaphthene-1-one (dpp-mian)

The electrochemical characteristics of 2-mono(2,6-diisopropylphenylimino)acenaphthene-1-one (dpp-mian) have been investigated. One-electron reduction of dpp-mian involves the iminoketone fragment, which is revealed by the EPR spectrum obtained after the electrolysis of the dpp-mian solution in tetrahydrofuran (THF). The reduction of dpp-mian with one equivalent of metallic potassium leads to a similar EPR spectrum. The sodium complex [(dpp-mian)Na(dme)]₂ (1) produces an EPR signal with hyperfine coupling on the nitrogen atom of the iminoketone fragment of the dpp-mian ligand. Dpp-mian can also be reduced in a one-electron process by SnCl₂ ×(dioxane). In this case, complex (dpp-mian)₂ SnCl₂ (2) is formed, with the tin atom displaying an oxidation state of +4. Tin(II) chloride dihydrate, SnCl₂ ×2(H₂ O), also reduces dpp-mian, but the two ligands bound to tin in the product form a new carbon-carbon bond between the ketone moieties of the dpp-mian monoanions to form complex (bis-dpp-mian)HSnCl₃ (3). Metallic tin reduces dpp-mian to form the (bis-dpp-mian)₂ Sn (4) species. Compounds 1-4 were characterized by X-ray diffraction.

Cycloaddition versus Cleavage of the C=S Bond of Isothiocyanates Promoted by Digallane Compounds with Noninnocent α-Diimine Ligands

Whereas the chemistry of single-bond activation by compounds of the main group elements has undergone some development in recent years, the cleavage of multiple bonds remains underexplored. Herein, the reactions of two digallanes bearing α-diimine ligands, namely, [L¹ Ga-GaL¹ ] (1, L¹ =dpp-dad=[(2,6-iPr₂ C₆ H₃ )NC(CH₃ )]₂ ) and [L² Ga-GaL² ] (2, L² =dpp-bian=1,2-[(2,6-iPr₂ C₆ H₃ )NC]₂ C₁₀ H₆ ), with isothiocyanates are reported. Reactions of 1 or 2 with isothiocyanates in 1:2 molar ratio proceeded with [2+4] cycloaddition of the C=S bond across the C₂ N₂ Ga metallacycle with formation of C-C and S-Ga single bonds to afford [L¹ (RN=C-S)Ga-Ga(S-C=NR)L¹ ] (3, R=Me; 4, R=Ph) and [L² (RN=C-S)Ga-Ga(S-C=NR)L² ] (8, R=allyl; 9, R=Ph). In the cases of 8 and 9, this cycloaddition is reversible. The digallanes reacted with 2 equiv of PhNCS in the presence of Na metal or at high temperatures through a unique reductive cleavage of the C=S bond to yield the disulfide-bridged digallium species [Na(THF)₃ ]₂ [L¹ Ga(μ-S)₂ GaL¹ ] (5), [L² Ga(μ-S)₂ GaL² ] (10), and [Na(DME)₃ ][L² Ga(μ-S)₂ GaL² ] (11). Moreover, products 4 and 5 can further react with an excess of isothiocyanate, through cleavage of the C=S bond or cycloaddition, to give the bis- or mono-S-bridged complexes [Na(THF)₂ ]₂ [L¹ (PhN=C-S)Ga(μ-S)₂ Ga(S-C=NPh)L¹ ] (6) and [L¹ (PhN=C-S)Ga(μ-S)Ga(S-C=NPh)L¹ ] (7). All the newly prepared compounds were characterized by elemental analysis, single-crystal X-ray diffraction, IR spectroscopy, NMR (3-9) or ESR spectroscopy (11), and DFT calculations.

Simultaneous Introduction of Two Nitroxides in the Reaction: A New Approach to the Synthesis of Heterospin Complexes

A new approach to the synthesis of multispin compounds has been developed, namely, the simultaneous introduction of two different stable nitroxides (nitronyl nitroxide and imino nitroxide) in a reaction with a metal ion. An important characteristic of the new method is that nitronyl nitroxide and imino nitroxide introduced in the reaction with the metal are the products of different series; i.e., the nitronyl nitroxide molecule differs from the imino nitroxide molecule not only in one additional oxygen molecule per molecule but also in another substituent in the side chain of the organic paramagnet. This possibility was demonstrated on the synthesis of multispin compounds [Ni₂(A¹)(L²)₂(Piv)(MeOH)], [Ni₂(L¹)(A²)₂(Piv)(H₂O)], [Co₂(A¹)(L²)₂(Piv)(MeOH)], and [Co₃(L¹)₂(A²)₂(Piv)₂], in which Lⁿ and Aⁿ differ in the substituent in the phenyl ring. The number of multispin compounds that can be synthesized by the proposed method is almost unlimited. The heterospin complexes of transition metals with coordinated nitronyl nitroxide and imino nitroxide in one molecule contain energy-different exchange interaction channels that differ in both magnitude and sign, as confirmed by the quantum-chemical analysis of exchange channels in [Ni(B¹)(B²)₂](NO₃)₂. The series of mixed-radical complexes may include compounds with nontrivial magnetic properties such as [Co₂(A¹)(L²)₂(Piv)(MeOH)], which experiences bulk magnetic ordering below 3.5 K.

Ytterbium and Europium Complexes of Redox-Active Ligands: Searching for Redox Isomerism

The reaction of (dpp-Bian)Eu^II(dme)₂ (3) (dpp-Bian is dianion of 1,2-bis[(2,6-diisopropylphenyl)imino]acenaphthene; dme is 1,2-dimethoxyethane) with 2,2'-bipyridine (bipy) in toluene proceeds with replacement of the coordinated solvent molecules with neutral bipy ligands and affords europium(II) complex (dpp-Bian)Eu^II(bipy)₂ (9). In contrast the reaction of related ytterbium complex (dpp-Bian)Yb^II(dme)₂ (4) with bipy in dme proceeds with the electron transfer from the metal to bipy and results in (dpp-Bian)Yb^III(bipy)(bipy^-̇) (10) - ytterbium(III) derivative containing both neutral and radical-anionic bipy ligands. Noteworthy, in both cases dianionic dpp-Bian ligands retain its reduction state. The ligand-centered redox-process occurs when complex 3 reacts with N,N'-bis[2,4,6-trimethylphenyl]-1,4-diaza-1,3-butadiene (mes-dad). The reaction product (dpp-Bian)Eu^II(mes-dad)(dme) (11) consists of two different redox-active ligands both in the radical-anionic state. The reduction of 3,6-di-tert-butyl-4-(3,6-di-tert-butyl-2-ethoxyphenoxy)-2-ethoxycyclohexa-2,5-dienone (the dimer of 2-ethoxy-3,6-di-tert-butylphenoxy radical) with (dpp-Bian)Eu^II(dme)₂ (3) caused oxidation of the dpp-Bian ligand to radical-anion to afford (dpp-Bian)(ArO)Eu^II(dme) (ArO = OC₆H₂-3,6-tBu₂-2-OEt) (12). The molecular structures of complexes 9-12 have been established by the single crystal X-ray analysis. The magnetic behavior of newly prepared compounds has been investigated by the SQUID technique in the range 2-310 K. The isotropic exchange model has been adopted to describe quantitatively the magnetic properties of the exchange-coupled europium(II) complexes (11 and 12). The best-fit isotropic exchange parameters are in good agreement with their density functional theory-computed counterparts.