Origin of Intersystem Crossing in Red-Light Absorbing Bodipy Derivatives: Time-Resolved Transient Optical and Electron Paramagnetic Resonance Spectral Studies with Twisted and Planar Compounds

We studied the intersystem crossing (ISC) property of red-light absorbing heavy atom-free dihydronaphtho[b]-fused Bodipy derivatives (with phenyl group attached at the lower rim via ethylene bridge, taking constrained geometry, i.e., BDP-1 and the half-oxidized product BDP-2) and dispiroflourene[b]-fused Bodipy (BDP-3) that have a twisted π-conjugated framework. BDP-1 and BDP-3 show strong and sharp absorption bands (i.e., ε = 2.0 × 105 M-1 cm-1 at 639 nm, fwhm ∼491 cm-1 for BDP-3). BDP-1 is significantly twisted (φ = 21.6°), while upon mono-oxidation, BDP-2 becomes nearly planar on the oxidized side (φ = 3.5°). Interestingly, BDP-2 showed efficient ISC (triplet state quantum yield, ΦT = 40%) due to S1/T2 state energy matching. Long-lived triplet excited state was observed (τT = 212 μs in solution and 2.4 ms in polymer matrix), and ISC takes 4.0 ns. Differently, twisted BDP-1 gives weak ISC only 5%, ISC takes 7.7 ns, and the triplet state is populated only with addition of ethyl iodide. Time-resolved electron paramagnetic resonance spectra of BDP-1 revealed the coexistence of two triplet states, with drastically different zero-field splitting D parameters of -2047 MHz and -1370 MHz, respectively, along with varying sublevel population ratios. We demonstrate that the ISC is not necessarily enhanced by torsion of the π-conjugation framework; instead, S1/Tn state energy matching is more efficient to induce ISC even in compounds that have planar molecular structures.

Steric and Electronic Influence of Excited-State Decay in Cu(I) MLCT Chromophores

ConspectusFor the past 11 years, a dedicated effort in our research group focused on fundamentally advancing the photophysical properties of cuprous bis-phenanthroline-based metal-to-ligand charge transfer (MLCT) excited states. We rationalized that, by gaining control over the numerous factors limiting the more widespread use of CuI MLCT photosensitizers, they would be readily adopted in numerous light-activated applications given the earth-abundance of copper and the extensive library of 1,10-phenanthrolines developed over the last century. Significant progress has been achieved by recognizing valuable structure-property concepts developed by other researchers in tandem with detailed ultrafast and conventional time-scale investigations, in-silico-inspired molecular designs to predict spectroscopic properties, and applying novel synthetic methodologies. Ultimately, we achieved a plateau in exerting cooperative steric influence to control CuI MLCT excited state decay. This led to combining sterics with π-conjugation and/or inductive electronic effects to further exert control over molecular photophysical properties. The lessons gleaned from our studies of homoleptic complexes were recently extended to heteroleptic bis(phenanthrolines) featuring enhanced visible light absorption properties and long-lived room-temperature photoluminescence. This Account navigates the reader through our intellectual journey of decision-making, molecular and experimental design, and data interpretation in parallel with appropriate background information related to the quantitative characterization of molecular photophysics using CuI MLCT chromophores as prototypical examples.Initially, CuI MLCT excited states, their energetics, and relevant structural conformation changes implicated in their photophysical decay processes are described. This is followed by a discussion of the literature that motivated our research in this area. This led to our first molecular design in 2013, achieving a 7-fold increase in excited state lifetime relative to the current state-of-the-art. The lifetime and photophysical property enhancement resulted from using 2,9-branched alkyl groups in conjunction with flanking 3,8-methyl substituents, a strategy we adapted from the McMillin group, which was initially described in the late 1990s. Applications of this newly conceived chromophore are presented in solar hydrogen-producing photocatalysis, photochemical upconversion, and photosensitization of [4 + 4] anthracene dimerization of potential interest in thermal storage of solar energy in metastable intermediates. Ultrafast transient absorption and fluorescence upconversion spectroscopic characterization of this and related CuI molecules inform the resultant photophysical properties and vice versa, so the most comprehensive structure-property understanding becomes realized when these experimental tools are collectively utilized to investigate the same series of molecules. Computationally guided structural designs generated newly conceived molecules featuring visible light-harvesting and 2,9-cycloalkane substituted complexes. The latter eventually produced record-setting excited state lifetimes in molecules leveraging both cooperative steric influence and electronic inductive effects. Using photoluminescence data from structurally homologous CuI MLCT excited states collected over 44 years, an energy gap correlation successfully modeled the data spanning a 0.3 eV emission energy range. Finally, a new research direction is revealed detailing structure-photophysical property relationships in heteroleptic CuI phenanthroline chromophores that are photoluminescent at room temperature.

Homomolecular Triplet-Triplet Annihilation in Metalloporphyrin Photosensitizers

Metalloporphyrins are ubiquitous in their applications as triplet photosensitizers, particularly for promoting sensitized photochemical upconversion processes. In this study, bimolecular excited state triplet-triplet quenching kinetics, termed homomolecular triplet-triplet annihilation (HTTA), exhibited by the traditional triplet photosensitizers-zinc(II) tetraphenylporphyrin (ZnTPP), palladium(II) octaethylporphyrin (PdOEP), platinum(II) octaethylporphyrin (PtOEP), and platinum(II) tetraphenyltetrabenzoporphyrin (PtTPBP)─were revealed using conventional transient absorption spectroscopy. Nickel(II) tetraphenylporphyrin was used as a control sample as it is known to be rapidly quenched intramolecularly through ligand-field state deactivation and, therefore, cannot result in triplet-triplet annihilation (TTA). The single wavelength transients associated with the metalloporphyrin triplet excited state decay─measured as a function of incident laser pulse energy in toluene─were well modeled using parallel first- and second-order kinetics, consistent with HTTA being operable. The combined transient kinetic data enabled the determination of the first-order rate constants (kT) for excited triplet decay in ZnTPP (4.0 × 103 s-1), PdOEP (3.6 × 103 s-1), PtOEP (1.2 × 104 s-1), and PtTPBP (2.1 × 104 s-1) as well as the second-order rate constant (kTT) for HTTA in ZnTPP (5.5 × 109 M-1 s-1), PdOEP (1.1 × 1010 M-1 s-1), PtOEP (7.1 × 109 M-1 s-1), and PtTPBP (1.6 × 1010 M-1 s-1). In most instances, triplet excited state extinction coefficients are either reported for the first time or have been revised using ultrafast transient absorption spectroscopy and singlet depletion: ZnTPP (78,000 M-1 cm-1) at 470 nm, PdOEP (67,000 M-1 cm-1) at 430 nm, PtOEP (51,000 M-1 cm-1) at 418 nm, and PtTPBP (100,000 M-1 cm-1) at 460 nm. The combined experimental results establish competitive time scales for homo- and heteromolecular TTA rate constants, implying the significance of considering HTTA processes in future research endeavors harnessing TTA photochemistry using common metalloporphyrin photosensitizers.

Atomistic understanding of enhanced selectivity in photocatalytic oxidation of benzyl alcohol to benzaldehyde using graphitic carbon nitride loaded with single copper atoms

The loading of graphitic carbon nitride (gCN) with transition metals has received significant attention for efficient light-driven catalysis. However, the contribution of the loaded metals to enhanced performance remains unclear. In this study, Cu is loaded onto gCN to understand how photocatalytic activity is regulated by the loaded metals. Loading gCN with 3 wt% of Cu increases the electron population by 8.1 and 4.6 times under UV (λ < 370 nm) and visible light (390 < λ < 740 nm), respectively. This sample shows nearly 100% selectivity for oxidizing benzyl alcohol to benzaldehyde and a high yield-to-power ratio, reaching 0.35 mmol g-1 h-1 W-1. The loaded Cu species exist as single atoms with a +1-oxidation state. Each Cu+ cation is coordinated to two (at 3 wt% Cu) or four (at 6 wt% Cu) N atoms within the cavity of the gCN framework. Doubling the Cu loading results in a smaller electron population and coordinatively more saturated Cu+ cations, making it catalytically less reactive. Ab initio molecular dynamics simulations show that Cu+ cations produce filled mid-gap states above the valence band, which function as hole traps and hence oxidation centers. The Cu+ cation and the neighboring N atoms are electron-depletion and electron-accumulation sites due to Cu → N electron transfer, making it highly reactive for oxidative transformations via the hole transfer pathway. The role of Cu as a hole-transfer site updates the received understanding that surface-loaded Cu serves as an electron-accumulation site. A strong correlation is observed between the electron population at steady-state and the product yield, indicating that it could serve as a promising performance indicator for the design of future photocatalysts.

Solvent and alkyl substitution effects on charge-transfer mediated triplet state generation in BODIPY dyads: a combined computational and experimental study

Donor-acceptor dyads based on BODIPYs have been recently employed to enhance the formation of triplet excited states with the process of spin-orbit charge transfer intersystem crossing (SOCT-ISC) which does not require introduction of transition metals or other heavy atoms into the molecule. In this work we compare two donor-acceptor dyads based on meso-naphthalenyl BODIPY by combining experimental and computational investigations. The photophysical and electrochemical characterization reveals a significant effect of alkylation of the BODIPY core, disfavoring the SOCT-ISC mechanism for the ethylated BODIPY dyad. This is complemented with a computational investigation carried out to rationalize the influence of ethyl substituents and solvent effects on the electronic structure and efficiency of triplet state population via charge recombination (CR) from the photoinduced electron transfer (PeT) generated charge-transfer (CT) state. Time dependent-density functional theory (TD-DFT) calculations including solvent effects and spin-orbit coupling (SOC) calculations uncover the combined role played by solvent and alkyl substitution on the lateral positions of BODIPY.

Unexpected Boost in Activity of a Cu(I) Photosensitizer by Stabilizing a Transient Excited State

In this study, we present a slight but surprisingly successful structural modification of the previously reported heteroleptic Cu(I) photosensitizer Cubiipo ([(xantphos)Cu(biipo)]PF₆; biipo = 16H-benzo-[4',5']-isoquinolino-[2',1':1,2]-imidazo-[4,5-f]-[1,10]-phenanthrolin-16-one). As a key feature, biipo bears a naphthalimide unit at the back, which is directly fused to a phenanthroline moiety to extend the conjugated π-system. This ligand was now altered to include two additional methyl groups at the 2,9-positions at the phenanthroline scaffold. Comparing the novel Cudmbiipo complex to its predecessor, ultrafast transient absorption spectroscopy reveals the efficient suppression of a major deactivation pathway by stabilization of a transient triplet state. Furthermore, quantitative measurements of singlet oxygen evolution in solution confirmed that a larger fraction of the excited-state population is transferred to the photocatalytically active ligand-centered triplet ³LC state with a much longer lifetime of ∼30 μs compared to Cubiipo (2.6 μs). In addition, Cudmbiipo was compared with the well-established reference complex Cubcp ([(xantphos)Cu(bathocuproine)]PF₆) in terms of its photophysical and photocatalytic properties by applying time-resolved femto- and nanosecond absorption, step-scan Fourier transform infrared (FTIR), and emission spectroscopies. Superior light-harvesting properties and a greatly enhanced excited-state lifetime with respect to Cubcp enable Cudmbiipo to be more active in exemplary photocatalytic applications, i.e., in the formation of singlet oxygen and the isomerization of (E)-stilbene.

Charge Transfer, Intersystem Crossing, and Electron Spin Dynamics in a Compact Perylenemonoimide-Phenoxazine Electron Donor-Acceptor Dyad

With phenoxazine (PXZ) as the electron donor and perylene-3,4-dicarboximide (PMI) as the electron acceptor, we prepared a compact, orthogonal electron donor-acceptor dyad (PMI-PXZ) to study the spin-orbit charge transfer-induced intersystem crossing (SOCT-ISC). A weak charge transfer (CT) absorption band, due to S₀ → ¹CT transition, was observed (ε = 2840 M^-1 cm^-1 at 554 nm, FWHM: 2850 cm^-1), which is different from that of the previously reported analogue dyad with phenothiazine as the electron donor (PMI-PTZ), for which no CT absorption band was observed. A long-lived triplet state was observed (lifetime τ_T = 182 μs) with nanosecond transient absorption spectroscopy, and the singlet oxygen quantum yield (Φ_Δ = 76%) is higher than that of the previously reported analogue dyad PMI-PTZ (Φ_Δ = 57%). Ultrafast charge separation (ca. 0.14 ps) and slow charge recombination (1.4 ns) were observed with femtosecond transient absorption spectroscopy. With time-resolved electron paramagnetic resonance spectroscopy (TREPR), we confirmed the SOCT-ISC mechanism, and the electron spin polarization phase pattern of the triplet-state TREPR spectrum is (e, e, a, e, a, a), which is dramatically different from that of PMI-PTZ (a, e, a, e, a, e), indicating that the triplet-state TREPR spectrum of a specific chromophore in the electron donor-acceptor dyads is not only dependent on the geometry of the dyads but also dependent on the structure of the electron donor (or acceptor). Even one-atom variation in the donor structure may cause significant influence on the electron spin selectivity of the ISC of the electron donor-acceptor dyads.

Quantitative Structure-Property Relationship Modelling for the Prediction of Singlet Oxygen Generation by Heavy-Atom-Free BODIPY Photosensitizers*

Heavy-atom-free sensitizers forming long-living triplet excited states via the spin-orbit charge transfer intersystem crossing (SOCT-ISC) process have recently attracted attention due to their potential to replace costly transition metal complexes in photonic applications. The efficiency of SOCT-ISC in BODIPY donor-acceptor dyads, so far the most thoroughly investigated class of such sensitizers, can be finely tuned by structural modification. However, predicting the triplet state yields and reactive oxygen species (ROS) generation quantum yields for such compounds in a particular solvent is still very challenging due to a lack of established quantitative structure-property relationship (QSPR) models. In this work, the available data on singlet oxygen generation quantum yields (ΦΔ ) for a dataset containing >70 heavy-atom-free BODIPY in three different solvents (toluene, acetonitrile, and tetrahydrofuran) were analyzed. In order to build reliable QSPR model, a series of new BODIPYs were synthesized that bear different electron donating aryl groups in the meso position, their optical and structural properties were studied along with the solvent dependence of singlet oxygen generation, which confirmed the formation of triplet states via the SOCT-ISC mechanism. For the combined dataset of BODIPY structures, a total of more than 5000 quantum-chemical descriptors was calculated including quantum-chemical descriptors using density functional theory (DFT), namely M06-2X functional. QSPR models predicting ΦΔ values were developed using multiple linear regression (MLR), which perform significantly better than other machine learning methods and show sufficient statistical parameters (R=0.88-0.91 and q2 =0.62-0.69) for all three solvents. A small root mean squared error of 8.2 % was obtained for ΦΔ values predicted using MLR model in toluene. As a result, we proved that QSPR and machine learning techniques can be useful for predicting ΦΔ values in different media and virtual screening of new heavy-atom-free BODIPYs with improved photosensitizing ability.

Iridium(III) Sensitisers and Energy Upconversion: The Influence of Ligand Structure upon TTA-UC Performance

Six substituted ligands based upon 2-(naphthalen-1-yl)quinoline-4-carboxylate and 2-(naphthalen-2-yl)quinoline-4-carboxylate have been synthesised in two steps from a range of commercially available isatin derivatives. These species are shown to be effective cyclometallating ligands for Ir^III , yielding complexes of the form [Ir(C^N)₂ (bipy)]PF₆ (where C^N=cyclometallating ligand; bipy=2,2'-bipyridine). X-ray crystallographic studies on three examples demonstrate that the complexes adopt a distorted octahedral geometry wherein a cis-C,C and trans-N,N coordination mode is observed. Intraligand torsional distortions are evident in all cases. The Ir^III complexes display photoluminescence in the red part of the visible region (668-693 nm), which is modestly tuneable through the ligand structure. The triplet lifetimes of the complexes are clearly influenced by the precise structure of the ligand in each case. Supporting computational (DFT) studies suggest that the differences in observed triplet lifetime are likely due to differing admixtures of ligand-centred versus MLCT character instilled by the facets of the ligand structure. Triplet-triplet annihilation upconversion (TTA-UC) measurements demonstrate that the complexes based upon the 1-naphthyl derived ligands are viable photosensitisers with upconversion quantum efficiencies of 1.6-6.7 %.

Triflic Acid-Promoted Adamantylation and tert-Butylation of Pyrene: Fluorescent Properties of Pyrene-Decorated Adamantanes and a Channeled Crystal Structure of 1,3,5-Tris(pyren-2-yl)adamantane

Triflic acid-promoted 1-adamantylation and tert-butylation of pyrene at positions 2 and 2,7 along with the synthesis of compounds having one-, two-, and three-pyrenyl groups attached to the adamantane scaffold are disclosed. Fluorescent properties of these compounds and channeled crystal structure of the 1,3,5-tris(pyren-2-yl)adamantane containing chloroform as a guest are also presented.

Upconverted emission-driven photothermal conversion with gold nanospheres based on triplet–triplet annihilation

Low-energy visible light was converted into heat energy through the excitation of the localized surface plasmon resonance of gold nanospheres excited by upconverted emission based on triplet–triplet annihilation of organic molecules.

Amplified circularly polarized phosphorescence from co-assemblies of platinum(ii) complexes

Molecules capable of producing zero-field circularly polarized phosphorescence (CPP) are highly valuable for chiroptoelectronic applications that rely on triplet exciton. However, the paucity of tractable molecular design rules for obtaining CPP emission has inhibited full utilization. We report amplification of CPP by the formation of helical co-assemblies consisting of achiral square planar cycloplatinated complexes and small fractions of homochiral cycloplatinated complexes. The latter has a unique Pfeiffer effect during the formation of superhelical co-assemblies, enabling versatile chiroptical control. Large dissymmetry factors in electronic absorption (g _abs, 0.020) and phosphorescence emission (g _lum, 0.064) are observed from the co-assemblies. These values are two orders of magnitude improved relative to those of individual molecules. In addition, photoluminescence quantum yields (PLQY) also increase by a factor of ten. Our structural, photophysical, and quantum chemical investigations reveal that the chiroptical amplification is attributable to utilization of both the magnetically allowed electronic transition and asymmetric coupling of excitons. The strategy overcomes the trade-off between g _lum and PLQY which has frequently been found for previous molecular emitters of circularly polarized luminescence. It is anticipated that our study will provide new insight into the future research for the exploitation of the full potential of CPP.

Sensitized triplet-triplet annihilation upconversion in water and its application to photochemical transformations

Sensitized triplet-triplet annihilation (TTA) is a promising mechanism for solar energy conversion, but so far its application has been practically completely limited to organic solvents and self-assembled or solid state systems. Combining water-soluble ruthenium complex-pyrene dyads with particularly long excited-state lifetimes as sensitizers and highly fluorescent commercial anthracenes as acceptors/annihilators, we were able to achieve green-to-violet upconversion with unprecedented quantum yields in pure water. Compared to the only known system exploiting sensitized TTA in homogeneous aqueous solution, we improve the overall photon upconversion efficiency by a full order of magnitude and present the very first example for a chemical transformation on a laboratory scale via upconversion in water. Specifically, we found that a thermodynamically challenging carbon-chlorine bond activation can be driven by green photons from an inexpensive continuous wave light source in the presence of dissolved oxygen. Our study is thus potentially relevant in the context of cleaning water from halogenated (toxic) contaminants and for sustainable photochemistry in the most environmentally friendly solvent.

Chromophore-Functionalized Phenanthro-diimine Ligands and Their Re(I) Complexes

A series of diimine ligands has been designed on the basis of 2-pyridyl-1 H-phenanthro[9,10- d]imidazole (L1, L2). Coupling the basic motif of L1 with anthracene-containing fragments affords the bichromophore compounds L3-L5, of which L4 and L5 adopt a donor-acceptor architecture. The latter allows intramolecular charge transfer with intense absorption bands in the visible spectrum (lowest λabs 464 nm (ε = 1.2 × 104 M-1 cm-1) and 490 nm (ε = 5.2 × 104 M-1 cm-1) in CH2Cl2 for L4 and L5, respectively). L1-L5 show strong fluorescence in a fluid medium (Φem = 22-92%, λem 370-602 nm in CH2Cl2); discernible emission solvatochromism is observed for L4 and L5. In addition, the presence of pyridyl (L1-L5) and dimethylaminophenyl (L5) groups enables reversible alteration of their optical properties by means of protonation. Ligands L1-L5 were used to synthesize the corresponding [Re(CO)3X(diimine)] (X = Cl, 1-5; X = CN, 1-CN) complexes. 1 and 2 exhibit unusual dual emission of singlet and triplet parentage, which originate from independently populated 1ππ* and 3MLCT excited states. In contrast to the majority of the reported Re(I) carbonyl luminophores, complexes 3-5 display moderately intense ligand-based fluorescence from an anthracene-containing secondary chromophore and complete quenching of emission from the 3MLCT state presumably due to the triplet-triplet energy transfer (3MLCT → 3ILCT).

Spin–orbit charge transfer intersystem crossing in perylenemonoimide–phenothiazine compact electron donor–acceptor dyads

Efficient triplet excited state production (57%) was observed for perylenemonoimide–phenothiazine compact electron donor–acceptor dyads based on spin–orbit charge transfer ISC.

Drug delivery function of carboxymethyl-β-cyclodextrin modified upconversion nanoparticles for adamantine phthalocyanine and their NIR-triggered cancer treatment

In this manuscript COOH-β-CD was used to connect UCNPs and Ad-ZnPc. The system has a strong NIR light triggered PDT activity toward cancer cells.