Near-Infrared-Responsive Rare Earth Nanoparticles for Optical Imaging and Wireless Phototherapy

Near-infrared (NIR) light is well-suited for the optical imaging and wireless phototherapy of malignant diseases because of its deep tissue penetration, low autofluorescence, weak tissue scattering, and non-invasiveness. Rare earth nanoparticles (RENPs) are promising NIR-responsive materials, owing to their excellent physical and chemical properties. The 4f electron subshell of lanthanides, the main group of rare earth elements, has rich energy-level structures. This facilitates broad-spectrum light-to-light conversion and the conversion of light to other forms of energy, such as thermal and chemical energies. In addition, the abundant loadable and modifiable sites on the surface offer favorable conditions for the functional expansion of RENPs. In this review, the authors systematically discuss the main processes and mechanisms underlying the response of RENPs to NIR light and summarize recent advances in their applications in optical imaging, photothermal therapy, photodynamic therapy, photoimmunotherapy, optogenetics, and light-responsive drug release. Finally, the challenges and opportunities for the application of RENPs in optical imaging and wireless phototherapy under NIR activation are considered.

Ultrasmall Bi/Cu Coordination Polymer Combined with Glucose Oxidase for Tumor Enhanced Chemodynamic Therapy by Starvation and Photothermal Treatment

Multi-modal combination therapy for tumor is expected to have superior therapeutic effect compared with monotherapy. In this study, a super-small bismuth/copper-gallic acid coordination polymer nanoparticle (BCN) protected by polyvinylpyrrolidone is designed, which is co-encapsulated with glucose oxidase (GOX) by phospholipid to obtain nanoprobe BCGN@L. It shows that BCN has an average size of 1.8 ± 0.7 nm, and photothermal conversion of BCGN@L is 31.35% for photothermal imaging and photothermal therapy (PTT). During the treatment process of 4T1 tumor-bearing nude mice, GOX catalyzes glucose in the tumor to generate gluconic acid and hydrogen peroxide (H2 O2 ), which reacts with copper ions (Cu2+ ) to produce toxic hydroxyl radicals (•OH) for chemodynamic therapy (CDT) and new fresh oxygen (O2 ) to supply to GOX for further catalysis, preventing tumor hypoxia. These reactions increase glucose depletion for starvation therapy , decrease heat shock protein expression, and enhance tumor sensitivity to low-temperature PTT. The in vitro and in vivo results demonstrate that the combination of CDT with other treatments produces excellent tumor growth inhibition. Blood biochemistry and histology analysis suggests that the nanoprobe has negligible toxicity. All the positive results reveal that the nanoprobe can be a promising approach for incorporation into multi-modal anticancer therapy.

Fabrication of a New Hyaluronic Acid/Gelatin Nanocomposite Hydrogel Coating on Titanium-Based Implants for Treating Biofilm Infection and Excessive Inflammatory Response

Persistent inflammation caused by implant-associated biofilm infections has emerged as a significant clinical issue. While many methods have been developed to give implants great anti-biofilm benefits, the post-inflammatory microenvironment is frequently disregarded. Oxidative stress (OS) due to excessive reactive oxygen species (ROS) is considered to be one of the specific physiological signals of the inflammation microenvironment. Herein, ZIF-90-Bi-CeO₂ nanoparticles (NPs) were incorporated into a Schiff-base chemically crosslinked hydrogel composed of aldehyde-based hyaluronic acid and gelatin. Through chemical crosslinking between polydopamine and gelatin, the hydrogel coating adhered to the Ti substrate. The modified Ti substrate gained multimodal antibacterial and anti-biofilm functions, which were attributed to the photothermal effect of Bi NPs, and the release of Zn ions and CeO₂ NPs. Notably, CeO₂ NPs endowed the system with dual-enzyme (SOD- and CAT-like) catalytic activities. In a rat implant-associated infection (IAI) model, the dual-functional hydrogel had a biofilm-removal ability and regulated OS and inflammatory responses to facilitate osseointegration. The photothermal therapy combined with a host inflammation-microenvironment regulation strategy might provide a novel treatment for biofilm infection and the accompanying excessive inflammation.

Hollow nanoparticles synthesized via Ostwald ripening and their upconversion luminescence-mediated Boltzmann thermometry over a wide temperature range

Upconversion nanoparticles (UCNPs) with hollow structures exhibit many fascinating optical properties due to their special morphology. However, there are few reports on the exploration of hollow UCNPs and their optical applications, mainly because of the difficulty in constructing hollow structures by conventional methods. Here, we report a one-step template-free method to synthesize NaBiF₄:Yb,Er (NBFYE) hollow UCNPs via Ostwald ripening under solvothermal conditions. Moreover, we also elucidate the possible formation mechanism of hollow nanoparticles (HNPs) by studying the growth process of nanoparticles in detail. By changing the contents of polyacrylic acid and H₂O in the reaction system, the central cavity size of NBFYE nanoparticles can be adjusted. Benefiting from the structural characteristics of large internal surface area and high surface permeability, NBFYE HNPs exhibit excellent luminescence properties under 980 nm near-infrared irradiation. Importantly, NBFYE hollow UCNPs can act as self-referenced ratiometric luminescent thermometers under 980 nm laser irradiation, which are effective over a wide temperature range from 223 K to 548 K and have a maximum sensitivity value of 0.0065 K^-1 at 514 K. Our work clearly demonstrates a novel method for synthesizing HNPs and develops their applications, which provides a new idea for constructing hollow structure UCNPs and will also encourage researchers to further explore the optical applications of hollow UCNPs.

Two-Stage Targeted Bismuthene-Based Composite Nanosystem for Multimodal Imaging Guided Enhanced Hyperthermia and Inhibition of Tumor Recurrence

A key challenge for nanomedicines in clinical application is to reduce the dose while achieving excellent efficacy, which has attracted extensive attention in dose toxicity and potential risks. It is thus necessary to reasonably design nanomedicine with high-efficiency targeting and accumulation. Here, we designed and synthesized a tetragonal bismuthene-based "all-in-one" composite nanosystem (TPP-Bi@PDA@CP) with two-stage targeting, multimodal imaging, photothermal therapy, and immune enhancement functions. Through the elaborate design of its structure, the composite nanosystem possesses multiple properties including (i) two-stage targeting function of hepatoma cells and mitochondria [the aggregation at the tumor site is 2.63-fold higher than that of traditional enhanced permeability and retention (EPR) effect]; (ii) computed tomography (CT) contrast-enhancement efficiency as high as ∼51.8 HU mL mg^-1 (3.16-fold that of the clinically available iopromide); (iii) ultrahigh photothermal conversion efficiency (52.3%, 808 nm), promising photothermal therapy (PTT), and high-contrast infrared thermal (IRT)/photoacoustic (PA) imaging of tumor; (iv) benefitting from the two-stage targeting function and excellent photothermal conversion ability, the dose used in this strategy is one of the lowest doses in hyperthermia (the inhibition rate of tumor cells was 50% at a dose of 15 μg mL^-1 and 75% at a dose of 25 μg mL^-1); (v) the compound polysaccharide (CP) shell with hepatoma cell targeting and immune enhancement functions effectively inhibited the recurrence of tumor. Therefore, our work reduces the dose toxicity and potential risk of nanomedicines and highlights the great potential as an all-in-one theranostic nanoplatform for two-stage targeting, integrated diagnostic imaging, photothermal therapy, and inhibition of tumor recurrence.

Engineered lanthanide-doped upconversion nanoparticles for biosensing and bioimaging application

Various fluctuations of intracellular ions, biomolecules, and other conditions in the physiological environment play crucial roles in fundamental biological processes. These factors are of great importance for analysis in biomedical detection. Nevertheless, developments of the simple, rapid, and accurate proof for specific detection still encounter major challenges. Upconversion nanoparticles (UCNPs), which could absorb multiple low-energy near-infrared light (NIR) photon excitation and emits high-energy photons caused by anti-Stokes shift, show unique upconversion luminescence (UCL) properties, for example, sharp emission band, high physicochemical stability like near-zero photobleaching, photo blinking in biological tissues, and long luminescence lifetime. Furthermore, the NIR used for the light source to excite UCNPs enable lower photo-damage effect and deeper penetration of tissue, and in the meantime, it can avoid the auto-fluorescence and light scattering from biological tissue interference. Thus, the lanthanide-doped UCNP-based functional platform with controlled structure, crystalline phase, size, and multicolor emission has become an appropriate nanomaterial for bioapplications such as biosensing, bioimaging, drug release, and therapies. In this review, the recent progress about synthesis and biomedical applications of UCNPs related to sensing and bioimaging is summarized. Firstly, the different luminescence mechanisms of the upconversion process are presented. Secondly, four of the most common methods for synthesizing UCNPs are compared as well as the advantages and disadvantages of these synthetic routes. Meanwhile, the surface modification of lanthanide-doped UCNPs was introduced to pave the way for their biochemistry applications. Next, this review detailed the biological applications of lanthanide-doped UCNPs, particularly in bioimaging, including UCL and multi-modal imaging and biosensing (monitoring intracellular ions and biomolecules). Finally, the challenges and future perspectives in materials science and biomedical fields of UCNPs are concluded: the low quantum yield of the upconversion process should be considered when they are executed as imaging contrast agents. And the biosafety of lanthanide-doped UCNPs needs to be evaluated.

Rare-Earth Doping in Nanostructured Inorganic Materials

Impurity doping is a promising method to impart new properties to various materials. Due to their unique optical, magnetic, and electrical properties, rare-earth ions have been extensively explored as active dopants in inorganic crystal lattices since the 18th century. Rare-earth doping can alter the crystallographic phase, morphology, and size, leading to tunable optical responses of doped nanomaterials. Moreover, rare-earth doping can control the ultimate electronic and catalytic performance of doped nanomaterials in a tunable and scalable manner, enabling significant improvements in energy harvesting and conversion. A better understanding of the critical role of rare-earth doping is a prerequisite for the development of an extensive repertoire of functional nanomaterials for practical applications. In this review, we highlight recent advances in rare-earth doping in inorganic nanomaterials and the associated applications in many fields. This review covers the key criteria for rare-earth doping, including basic electronic structures, lattice environments, and doping strategies, as well as fundamental design principles that enhance the electrical, optical, catalytic, and magnetic properties of the material. We also discuss future research directions and challenges in controlling rare-earth doping for new applications.

Construction of thiol-capped ultrasmall Au-Bi bimetallic nanoparticles for X-ray CT imaging and enhanced antitumor therapy efficiency

Thiol capped gold nanoparticles with small size, high dispersity, and broad light absorption covering ultraviolet (UV) to near infrared (NIR) region have been developed for catalysis, fluorescence imaging and photodynamic therapy (PDT). The constitution of the metal core in such nanoparticles can strongly influence the luminescence, catalysis, and stability properties. However, to date, a corresponding investigation of the influence of the metallic core on the generation of reaction oxygen species (ROS) and its therapeutic efficiency towards tumor cells remains to be lacking. Herein, we fabricated bimetallic nanoparticles by introducing bismuth into captopril capped gold nanoparticles. Surprisingly, the introduction of the Bi was found enhance the photothermal effect of the nanoparticles to a great extent, and the variation trends for the thermal effect, ROS generation rate, and tumor cell inhibition effect were found to disparate with the changes in the Au and Bi composition. The origin of the photothermal effect was deduced through density functional theory calculations based on microscopic construction. Combined with the intrinsic photodynamic effect, the bimetallic nanoparticles showed an outstanding tumor cell inhibition effect. Furthermore, due to the excellent CT imaging property, our designed nanoparticles provide the exciting possibility to realize CT imaging guided and light-mediated tumor therapy.

One-pot synthesis of Ln3+-doped porous BiF3@PAA nanospheres for temperature sensing and pH-responsive drug delivery guided by CT imaging

The design and synthesis of responsive inorganic nanocapsules have attracted intensive research interest in cancer treatment. The combination of non-invasive diagnosis and chemotherapy into a single theranostic nanoplatform is prospective in the biomedical field. In this work, a polyacrylic acid (PAA)-functionalized porous BiF₃:Yb,Er nanocarrier was constructed via a straightforward one-pot solvothermal strategy. Compared with the undoped BiF₃ sub-microspheres, the lanthanide ion (Ln³⁺) doping endowed the BiF₃ material with a smaller size and increased BET specific surface area and pore volume, which make it suitable as a drug carrier. It was found that the synthesized nanomaterial could effectively relieve the side effects of doxorubicin (DOX) and exhibited pH-dependent DOX loading and release. Its satisfactory biocompatibility and efficient tumor inhibition were emphasized by a series of in vitro/in vivo experiments. In addition, the synthesized nanomaterial exhibited favorable CT contrast efficacy due to the excellent X-ray attenuation coefficient of Bi. Moreover, characteristic upconversion luminescence and temperature sensing in a wide temperature range were realized over the synthesized BiF₃:Yb,Er sample. Therefore, carboxyl-functionalized BiF₃:Yb,Er can be expected to be an ideal candidate in the fabrication of temperature sensing and multifunctional theranostic nanoplatforms.

Lanthanide-doped bismuth-based fluoride nanoparticles: controlled synthesis and ratiometric temperature sensing

Controllable NaBiF₄ nanoparticles have been synthesized through Gd³⁺ doping for ratiometric temperature sensing in a wide range.

Ultrafast synthesis of ultrasmall polyethylenimine-protected AgBiS2 nanodots by "rookie method" for in vivo dual-modal CT/PA imaging and simultaneous photothermal therapy

Developing a biocompatible nanotheranostic platform integrating diagnostic and therapeutic functions is a great prospect for cancer treatment. However, it is still a great challenge to synthesize nanotheranostic agents using an ultra-facile method. In the research reported here, ultrasmall polyethylenimine-protected silver bismuth sulfide (PEI-AgBiS2) nanodots were successfully synthesized using an ultra-facile and environmentally friendly strategy (1 min only at room temperature), which could be described as a "rookie method". PEI-AgBiS2 nanodots show good monodispersity and biocompatibility. For the first time, PEI-AgBiS2 nanodots were reported as a powerful and safe nanotheranostic agent for cancer treatment. PEI-AgBiS2 nanodots exhibit excellent computed tomography (CT) and photoacoustic (PA) dual-modal imaging ability, which could effectively guide photothermal cancer therapy. Furthermore, PEI-AgBiS2 nanodots exhibit a high photothermal conversion efficiency (η = 35.2%). The photothermal therapy (PTT) results demonstrated a highly efficient tumor ablation ability. More importantly, the blood biochemistry and histology analyses verify that the PEI-AgBiS2 nanodots have negligible long-term toxicity. This work highlights that PEI-AgBiS2 nanodots produced using this extremely effective method are a high-performance and safe PTT agent. These findings open a new gateway for synthesizing nanotheranostic agents by using this ultra-facile method in the future.

Catalytic Application of Oxygen Vacancies Induced by Bi3+ Incorporation in ThO2 Samples Obtained by Solution Combustion Synthesis

Recognizing immense advantages of solution-based combustion synthesis, its applicability to determine the extent of dissolution of Bi³⁺ in fluorite-structured thoria has been examined to generate high-surface-area samples with massive defects. Up to 50 mol % of thorium could be substituted with bismuth retaining fluorite structure beyond which phase separation occurred. The lattice parameters from Le-Bail refinements of their powder X-ray diffraction patterns showed marginal increase with increase in bismuth content, suggesting the competing effect between the size of the cation and the oxygen vacancy concentration. Energy-dispersive X-ray spectrometry analysis and high-resolution transmission electron microscopy measurements have also confirmed the composition and structure of the limiting composition. With progressive bismuth content, the band due to the fluorite (at 460 cm^-1) diffused and a defect band in the region 570-600 cm^-1 emerged in the Raman spectra. From these changes, the oxygen vacancy concentrations in these samples have been determined, which increased with increase in bismuth content. Absorbance in the visible region was noticed for bismuth-containing samples, and band gap values determined from the Kubelka-Munk function were in the range 2.34-3.24 eV. In addition to the blue emission from oxygen vacancies, ³P₁ → ¹S₀ transition of Bi³⁺ was noticed in the photoluminescence spectrum. From Brunauer-Emmett-Teller measurements, the surface area of Th_0.50Bi_0.50O_2-δ obtained by solution combustion synthesis was measured to be 265.74 m² g^-1, higher than the value (39.00 m² g^-1) for the sample prepared by solid-state synthesis. All of these factors combined with oxygen vacancies as defect centers have been found to play critical control over their use as catalyst for the reductive transformation of nitroaromatics and oxidative decolorization of organic dye molecules (methyl orange and xylenol orange). A nice correlation between oxygen vacancy concentration and pseudo first-order rate constants of these catalytic conversions has been arrived. The catalyst was found to retain its efficiency up to four cycles without undergoing any structural change during these experiments.

Energy Transfer in Supramolecular Heteronuclear Lanthanide Dimers and Application to Fluoride Sensing in Water

In the presence of fluoride anions, [LnL(H₂ O)]⁺ complexes, based on the coordination of a lanthanide (Ln) cation into the cavity of a C_2v symmetrical cyclen-based ligand (L), self-assemble in water to form [(LnL)₂ F]⁺ dimers. The crystal structures of the Yb hydrated monomer and of the fluorinated dimer are reported and analyzed to unravel the impact of the cumulative effect of weak hydrogen bonding and aromatic stacking interactions in the supramolecular assembly. The assembly is stable over a broad range of pH 3-8. A combination of equimolar amounts of Eu and Tb complexes led to a quasistatistical mixture of homo- and heterodimers, as observed by using electrospray mass spectrometry. In the heterodimers, selective excitation into the ⁷ F₆ →⁵ D₄ absorption band of the Tb center at λ=488 nm allowed the observation of a Tb-to-Eu downshifting energy transfer, not observed in the absence of fluoride ions. Analysis of the excited-state lifetimes of the dimers within the frame of the Förster theory of energy transfer showed the transfer to have an efficiency of 34 %, with a corresponding Förster radius of 4.1 Å; thereby, unraveling the short Ln-Ln distance as a crucial parameter of the energy-transfer process. By using equimolar mixtures of the Tb and Eu complexes, the energy-transfer phenomenon was used for a ratiometric sensing of fluoride anions in water with a detection limit of 17.7 nm.

Near-infrared optical and X-ray computed tomography dual-modal imaging probe based on novel lanthanide-doped K0.3Bi0.7F2.4 upconversion nanoparticles

A novel K_0.3Bi_0.7F_2.4 upconversion (UC) matrix has been prepared successfully by a solvothermal method. K_0.3Bi_0.7F_2.4:Yb³⁺/Ln³⁺ (Ln = Er, Ho, Tm) upconversion nanoparticles (UCNPs) show a corresponding excellent upconversion luminescence (UCL) under 980 nm laser irradiation. Especially, the strong near-infrared (NIR) UCL of K_0.3Bi_0.7F_2.4:20% Yb³⁺/0.5% Tm³⁺ (abbreviated as BYT) UCNPs is suitable for deep tissue optical imaging. Moreover, the high X-ray absorption coefficient of Bi makes the as-prepared UCNPs favorable for computed tomography (CT) imaging. The citrate-coated BYT UCNPs show good biocompatibility through the MTT assay towards HeLa cells and low hemolytic properties by hemolysis assay, which could be applied for in vivo optical and CT imaging. After intravenous injection of citrate-coated BYT UCNPs for one month, blood biochemistry and histology analysis of mice suggest the UCNPs have a negligible toxicity in vivo, implying citrate-coated BYT could be employed as a safe bioprobe for NIR optical and CT dual-modal imaging.

Optical Forces at the Nanoscale: Size and Electrostatic Effects

The reduced magnitude of the optical trapping forces exerted over sub-200 nm dielectric nanoparticles complicates their optical manipulation, hindering the development of techniques and studies based on it. Improvement of trapping capabilities for such tiny objects requires a deep understanding of the mechanisms beneath them. Traditionally, the optical forces acting on dielectric nanoparticles have been only correlated with their volume, and the size has been traditionally identified as a key parameter. However, the most recently published research results have shown that the electrostatic characteristics of a sub-100 nm dielectric particle could also play a significant role. Indeed, at present it is not clear what optical forces depend. In this work, we designed a set of experiments in order to elucidate the different mechanism and properties (i.e., size and/or electrostatic properties) that governs the magnitude of optical forces. The comparison between experimental data and numerical simulations have shown that the double layer induced at nanoparticle's surface, not considered in the classical description of nanoparticle's polarizability, plays a relevant role determining the magnitude of the optical forces. Here, the presented results constitute the first step toward the development of the dielectric nanoparticle over which enhanced optical forces could be exerted, enabling their optical manipulation for multiples purposes ranging from fundamental to applied studies.

Ultrafast Synthesis of Novel Hexagonal Phase NaBiF4 Upconversion Nanoparticles at Room Temperature

Upconversion (UC) nanoparticles (UCNPs) have evoked considerable attention in many fields owing to their fascinating features. However, rigorous synthesis conditions and expensive raw materials often limit their further applications. Here, a novel hexagonal phase NaBiF₄ UC matrix through a very facile method (one min only at room temperature) is synthesized. The nanoparticles show good monodispersity with uniform size. Under the 980 nm irradiation, Yb³⁺ /Ln³⁺ (Ln = Er, Ho, Tm) codoped NaBiF₄ nanoparticles show excellent UC luminescence (UCL). This super facile synthesis strategy and excellent matrix materials enable to achieve UCL in such low temperature, opening a new gateway for the UCNPs applied to a variety of areas in the future.

Simultaneous phase and size manipulation in NaYF4:Er3+/Yb3+ upconverting nanoparticles for a non-invasion optical thermometer

A series of Er³⁺/Yb³⁺-codoped NaYF₄ upconverting nanoparticles were synthesized via a hydrothermal method.

Yb3+-Concentration dependent upconversion luminescence and temperature sensing behavior in Yb3+/Er3+ codoped Gd2MoO6 nanocrystals prepared by a facile citric-assisted sol–gel method

Er³⁺/Yb³⁺-Codoped Gd₂MoO₆ upconversion nanocrystals with high sensor sensitivity and wide operation range were demonstrated for non-contact optical thermometry.

Origin of Blue-Green Emission in α-Zn2P2O7 and Local Structure of Ln3+ Ion in α-Zn2P2O7:Ln3+ (Ln = Sm, Eu): Time-Resolved Photoluminescence, EXAFS, and DFT Measurements

Considering the fact that pyrophosphate-based hosts are in high demand for making highly efficient luminescence materials, we doped two visible lanthanide ions, viz. Sm³⁺ and Eu³⁺, in Zn₂P₂O₇. Interestingly, it was oberved that pure Zn₂P₂O₇ displayed blue-green dual emission on irradiation with ultraviolet light. Emission and lifetime spectroscopy shows the presence of defects in pyrophosphate samples which are responsible for such emission. DFT calculations clearly pinpointed that the electronic transitions between defect states located at just below the conduction band minimum (arises due to V_O¹⁺ and V_O²⁺ defects) and valence band maximum, as well as impurity states situated in the band gap, can lead to dual emission in the blue-green region, as is also indicated by emission and lifetime spectra. X-ray absorption near edge spectroscopy (XANES) shows the stabilization of europium as well as samarium ion in the +3 oxidation state in α-Zn₂P₂O₇. The fact that α-Zn₂P₂O₇ has two different coordination numbers for zinc ions, i.e. five- and six-coordinate, the study of dopant ion distribution in this particular matrix will be an important step in realizing a highly efficient europium- and samarium-based red-emitting phosphor. Time resolved photoluminescence (TRPL) shows that both of these ions are heterogeneously distributed between five- and six-coordinated Zn²⁺ sites and it is the six-coordinated Zn²⁺ site which is the most favorable for lanthanide ion doping. Extended X-ray absorption fine structure (EXAFS) measurements also suggested that a six-coordinated zinc ion is the preferred site occupied by trivalent lanthanide ions, which is in complete agreement with TRPL results. It was observed that there is almost complete transfer of photon energy from Zn₂P₂O₇ to Eu³⁺, whereas this transfer is inefficient and almost incomplete in case of Sm³⁺, which is indeed important information for the realization of pyrophosphate-based tunable phosphors.

Synthesis, up-conversion luminescence and thermometry of Yb3+/Er3+ co-doped La2.4Mo1.6O8 phosphors

Synthesis, up-conversion luminescence properties and temperature-sensing application of La_2.4Mo_1.6O₈:Yb³⁺/Er³⁺ phosphors have been investigated using FIR technique.

Light modulation (vis-NIR region) based on lanthanide complex-functionalized carbon dots

Based on the carbon dots synthesized by using l-lysine, a series of lanthanide complexes-functionalized carbon dots were synthesized, which show multicolor visible and near-infrared luminescence upon visible-light excitation.