Solid-to-solid polymorphic phase transitions in two isostructural Bi(III) complexes with 1-phenylethyl-N-ethylthiosemicarbazide and halogens

Two isostructural (in room temperature) complexes of Bi(III) with halogens and sulfur ligands have been investigated in terms of the solid-to-solid phase transitions indicated by temperature. Both chloride and bromide (X) complexes of the general formula (µ₂-X)-(BiX₂L₂)₂ exhibit some phase transitions between 100 and 333 K, which, apart from the numerous similarities, show significant differences, which have been noted and analyzed in detail in this paper by using different techniques, i.e., powder and single crystal diffraction or DSC. The obtained results have also been collated with those obtained for solid solutions of both complexes.

Antimony(III) Halide-Assisted Stereospecific Coordination of Thione

The antimony halide-aided stereospecific coordination of a cyclic thiourea-type of ligand is observed for the first time. The antimony(III) imidazole thione complexes syn-[(L¹ )SbCl₃ ] (syn-1) and anti-[(L¹ )SbBr₃ ] (anti-2) have been synthesized in very good yield by the reaction between the spatially defined steric impact ligand [(IPaul)S] (L¹ ) ([(IPaul)S]=1,3-bis(2,4-methyl-6-diphenyl phenyl)imidazole thione) and corresponding antimony halide. The stereoselective formation of complexes syn-1 and anti-2 has been confirmed by both NMR and single-crystal X-ray diffraction studies. Interestingly the stereospecific nature of syn-1 and anti-2 remains intact in solution. Furthermore, the thermal stability of antimony(III) imidazole thione complexes were examined by TGA analysis.

Rare antimony(III) imidazole selone complexes: steric controlled structural and bonding aspects

Novel antimony(iii) imidazole selone complexes in a super crowded environment are reported for the first time. The super bulky selone antimony complexes, [{IPr*Se}(SbCl3)2] (1) and [{IPr*Se}(SbBr3)2] (2), were isolated from the reactions between IPr*Se (IPr*Se = [1,3-bis(2,6-diphenylmethylphenyl)imidazole selone]) and suitable antimony(iii) halides. 1 and 2 are dinuclear complexes with a Sb : Se ratio of 1 : 0.5 with an unusual coordination mode of selone. The molecules 1 and 2 consist of both Menshutkin-type Sbπaryl interactions and a Sb-Se coordination bond. However, the reaction between antimony(iii) halides and [(IPaul)Se] ([(IPaul)Se] = [1,3-bis(2,4-methyl-6-diphenyl phenyl)imidazole selone]) with a spatially defined steric impact gave the dinuclear complex [{(IPaul)Se}(SbCl3)]2 (3) and the mononuclear complex [{(IPaul)Se}(SbBr3)] (4) without Menshutkin-type interactions. The Sb : Se ratio in 3 and 4 is 1 : 1. Interestingly, the Menshutkin-type interaction was absent in 3 and 4 due to the efficient coordinating ability of the ligand [(IPaul)Se] with the Sb(iii) center compared to that of the super bulky ligand IPr*Se. The thermal property of these antimony selone complexes was also investigated. Density functional theory (DFT) calculations were carried out on the model systems [L(SbCl3)2] (1A), [L(SbCl3)] (1B), [L'(SbCl3)2] (1C), and [L'(SbCl3)] (1D), where L = [1,3-bis(2,6-diisopropyl-4-methyl phenyl)imidazole selone] and L' = [1,3-bis(phenyl)imidazole selone], to understand the nature of orbitals and bonding situations. The computed metrical parameters of 1A are in good agreement with the experimental values. Natural population analysis of the model system reveals that the natural charge and total population of antimony(iii) are comparable. The unequal interaction between selenium and antimony obtained using Wiberg bond indices (WBIs) is fully consistent with the findings of the single-crystal X-ray studies.

Catalytically active coordination polymer with a tiny Zn2Se2 ring bridged by bis-selone

The unprecedented architecture of a one-dimensional coordination polymer with a tiny Zn₂Se₂ ring system incorporated in the hydrogen-bonded array has been prepared, where the di-selone ligand functions as a unique neutral bridging ligand. The coordination polymer shows excellent catalytic activity in substituted 8-hydroxy-2-quinolinyl synthesis through Knoevenagel condensation reaction.

Tweaking the Charge Transfer: Bonding Analysis of Bismuth(III) Complexes with a Flexidentate Phosphane Ligand

To account for the charge transfer and covalent character in bonding between P and Bi centers, the electronic structures of [P(C6H4-o-CH2SCH3)3BiCln](3-n)+ (n = 0-3) model species have been investigated computationally. On the basis of this survey a synthetic target compound with a dative P→Bi bond has been selected. Consecutively, the highly reactive bismuth cage [P(C6H4-o-CH2SCH3)3Bi]3+ has been accessed experimentally and characterized. Importantly, our experiments (single-crystal X-ray diffraction and solid-state NMR spectroscopy) and computations (NBO and AIM analysis) reveal that the P···Bi bonding in this trication can be described as a dative bond. Here we have shown that our accordion-like molecular framework allows for tuning of the interaction between P and Bi centers.

Highly active mesoionic chalcogenone zinc(ii) derivatives for C–S cross-coupling reactions

Mesoionic heavier chalcogenone complexes of zinc(ii) have been isolated and utilized as catalysts in C–S cross coupling reactions between thiophenols and aryl halides under convenient reaction conditions.

Homoleptic and heteroleptic Zn(ii) selone catalysts for thioetherification of aryl halides without scrubbing oxygen

Tetra-coordinated zinc imidazoline selone complexes were synthesized and utilized as potential catalysts in the thioetherification of aryl halides without scrubbing oxygen.

Luminescent zinc(ii) selone macrocyclic ring

The synthesis and photophysical properties of macrocyclic Zn(ii) selone molecule have been reported. The structural property of Zn(ii) selone was elucidated using single crystal X-ray diffraction study. The solid-state structure of zinc(ii) selone molecule exhibits a perfect zinc(ii) selone 28 membered ring system with tetra coordination geometry around zinc(ii) center. The zinc(ii) selone ring system can be considered as the largest zinc(ii) ring system known without any non-interacting centered guest moiety. Detailed trends in photophysical as well as thermal properties were probed. In photoluminescence study, the solid-state sample of zinc(ii) selone ring system emits the bluish-yellow color with considerable quantum yields, while the solution state sample of zinc(ii) selone ring system in DMSO emits bluish-yellow. The luminescence lifetime of zinc(ii) selone was measured using standard time-correlated single photon counting (TCSPC) technique.

N-Heterocyclic Carbene Adducts of Main Group Elements and Their Use as Ligands in Transition Metal Chemistry

N-Heterocyclic carbenes (NHC) are nowadays ubiquitous and indispensable in many research fields, and it is not possible to imagine modern transition metal and main group element chemistry without the plethora of available NHCs with tailor-made electronic and steric properties. While their suitability to act as strong ligands toward transition metals has led to numerous applications of NHC complexes in homogeneous catalysis, their strong σ-donating and adaptable π-accepting abilities have also contributed to an impressive vitalization of main group chemistry with the isolation and characterization of NHC adducts of almost any element. Formally, NHC coordination to Lewis acids affords a transfer of nucleophilicity from the carbene carbon atom to the attached exocyclic moiety, and low-valent and low-coordinate adducts of the p-block elements with available lone pairs and/or polarized carbon-element π-bonds are able to act themselves as Lewis basic donor ligands toward transition metals. Accordingly, the availability of a large number of novel NHC adducts has not only produced new varieties of already existing ligand classes but has also allowed establishment of numerous complexes with unusual and often unprecedented element-metal bonds. This review aims at summarizing this development comprehensively and covers the usage of N-heterocyclic carbene adducts of the p-block elements as ligands in transition metal chemistry.

Cytoprotective effects of imidazole-based [S1] and [S2]-donor ligands against mercury toxicity: a bioinorganic approach

Here we report the coordination behaviour of an imidazole-based [S1]-donor ligand, 1,3-dimethyl-imidazole-2(3H)-thione (L1), and [S2]-donor ligand, 3,3'-methylenebis(1-methyl-imidazole-2(3H)-thione) (L2) or 4,4'-(3,3'-methylenebis-(2-thioxo-2,3-dihydro-imidazole-3,1-diyl))dibutanoic acid (L3), with HgX2 (X = Cl, Br or I) in solution and the solid state. NMR, UV-Vis spectroscopic, and single crystal X-ray studies demonstrated that L1 or L2 coordinated rapidly and reversibly to the mercury center of HgX2 through the thione moiety. Treatment of L2 with HgCl2 or HgBr2 afforded 16-membered metallacycle k1-(L2)2Hg2Cl4 or k1-(L2)2Hg2Br4 where two Cl or Br atoms are located inside the ring. In contrast, treatment of L2 with HgI2 afforded a chain-like structure of k1-[L2Hgl2]n, possibly due to the large size of the iodine atom. Interestingly, [S1] and [S2]-donor ligands (L1, L2, and L3) showed an excellent efficacy to protect liver cells against HgCl2 induced toxicity and the strength of their efficacy is in the order of L3 > L2 > L1. 30% decrease of ROS production was observed when liver cells were co-treated with HgCl2 and L1 in comparison to those cells treated with HgCl2 only. In contrast, 45% and 60% decrease of ROS production was observed in the case of cells co-treated with HgCl2 and thiones L2 and L3, respectively, indicating that [S2]-donor ligands L2 and L3 have better cytoprotective effects against oxidative stress induced by HgCl2 than [S1]-donor ligand L1. Water-soluble ligand L3 with N-(CH2)3CO2H substituents showed a better cytoprotective effect against HgCl2 toxicity than L2 in liver cells.

Reaction of imidazoline-2-selone derivatives with mesityltellurenyl iodide: a unique example of a 3c-4e Se→Te←Se three-body system embedding a tellurenyl cation

1,2-Bis(3-methyl-4-imidazolin-2-selone)ethane was used to stabilize the first example of an authentic mesityltellurenyl cation, [MesTe]⁺, as a charge transfer adduct featuring a 3c-4e Se→Te←Se three-body system.

NHCs in Main Group Chemistry

Since the discovery of the first stable N-heterocyclic carbene (NHC) in the beginning of the 1990s, these divalent carbon species have become a common and available class of compounds, which have found numerous applications in academic and industrial research. Their important role as two-electron donor ligands, especially in transition metal chemistry and catalysis, is difficult to overestimate. In the past decade, there has been tremendous research attention given to the chemistry of low-coordinate main group element compounds. Significant progress has been achieved in stabilization and isolation of such species as Lewis acid/base adducts with highly tunable NHC ligands. This has allowed investigation of numerous novel types of compounds with unique electronic structures and opened new opportunities in the rational design of novel organic catalysts and materials. This Review gives a general overview of this research, basic synthetic approaches, key features of NHC-main group element adducts, and might be useful for the broad research community.

Role of C, S, Se and P donor ligands in copper(i) mediated C–N and C–Si bond formation reactions

The first comparative study of C, S, Se and P donor ligands-supported copper(i) complexes for C–N and C–Si bond formation reactions are described. The syntheses and characterization of eight mononuclear copper(i) chalcogenone complexes, two polynuclear copper(i) chalcogenone complexes and one tetranuclear copper(i) phosphine complex are reported. All these new complexes were characterized by CHN analysis, FT-IR, UV-vis, multinuclear NMR and single crystal X-ray diffraction techniques. The single crystal X-ray structures of these complexes depict the existence of a wide range of coordination environments for the copper(i) center. This is the first comparative study of metal–phosphine, metal–NHC and metal–imidazolin-2-chalcogenones in C–N and C–Si bond formation reactions. Among all the catalysts, mononuclear copper(i) thione, mononuclear copper(i) N-heterocyclic carbene and tetranuclear copper(i) phosphine are exceedingly active towards the synthesis of 1,2,3-triazoles as well as for the cross-dehydrogenative coupling of alkynes with silanes. The cross-dehydrogenative coupling of terminal alkynes with silanes represents the first report of a catalytic process mediated by metal–imidazolin-2-chalcogenones.

The first comparative study of C, S, Se and P donor ligands-supported copper(i) complexes for C–N and C–Si bond formation reactions.

Anionic Bismuth-Oxido Carboxylate Clusters with Transition Metal Countercations

Six new anionic bismuth-oxido clusters containing trifluoroacetate ligands were prepared. These include two new Bi₆O₈ clusters: [M(NCMe)₂(H₂O)₄]₃[Bi₆(μ₃-O)₄(μ₃-OH)₄(CF₃CO₂)₁₂] with an octahedral Bi₆O₄(OH)₄ core (M = Ni, 1a; Co, 1b) and four Bi₄O₂ clusters, {[Co(NCMe)₆][Bi₄(μ₃-O)₂(CF₃CO₂)₁₀]}_n (2a), {[Co{HC(MeCO)₂(MeCNH)}₂][Bi₄(μ₃-O)₂(CF₃CO₂)₁₀]·2[CF₃CO₂]·2[CF₃CO₂H]·2[H₂O]}_n (2b), {[Cu(NCMe)₄]₂[Bi₄(μ₃-O)₂(CF₃CO₂)₁₀]·2[CF₃CO₂H]}_n (2c), and {[Me₄N]₂[Bi₄(μ₃-O)₂(CF₃CO₂)₁₀]·2[CF₃CO₂H]}_n (2d). These are among the first bismuth-oxido anionic clusters synthesized, and the first to have transition metal countercations. The Bi₆O₈ anion in 1a and 1b is a high-symmetry octahedron. Additionally, two of the new Bi₄O₂ clusters are arranged in 1D polymeric structures via bridging carboxylate ligands. The cation in compound 2c had not been previously characterized and was also observed in the synthesis of [Co{HC(MeCO)₂(MeCNH)}₂][Bi(NO₃)₆] (3). The new compounds were characterized using single crystal X-ray crystallography and elemental analysis.