Facile preparation of dihydrolipoic acid-stabilized red-emitting silver nanoclusters as a sensitive fluorometric probe for sulfide ions detection

In this work, we report a smartphone-integrated paper-based sensor for the determination of sulfide ions (S2-) using water-soluble dihydrolipoic acid stabilized silver nanoclusters (DHLA-AgNCs) as a nanoprobe. The optical properties of red emitting fluorescent DHLA-AgNCs was confirmed by UV-visible, steady state flourometric spectroscopic studies. The HR-TEM analysis revealed that the morphology of DHLA-AgNCs was quasi spherical with a grain size of ∼ 5.2 nm. The DHLA-AgNCs exhibited bright red luminescence with strong emission band centered at 650 nm upon the excitation at 420 nm. The excellent fluorescence property of DHLA-AgNCs was further utilized for fluorometric determination of S2- ions. The DHLA-AgNCs can be effectively quenched by increasing concentration of S2- ions owing to the formation of Ag2S complex. The DHLA-AgNCs probe could detect S2- ions preferentially even in the presence of other possible interfering anions with a limit of detection of 32.71 nM. In addition, the proposed technique was effectively used to detect S2- ions in environmental water samples such as tap and drinking water. The detect S2- ions detection was assay and showed good agree compared with the conventional methylene blue approach and showed comparable results. Moreover, a smartphone-paper-based detection assay was developed using the DHLA-AgNCs probe for highly selective and sensitive determination of S2- ions.

Ratiometric fluorometric determination of sulfide using graphene quantum dots and self-assembled thiolate-capped gold nanoclusters triggered by aluminum

A ratiometric-based fluorescence emission system was proposed for the determination of sulfide. It consists of blue emissive graphene quantum dots (GQDs) and self-assembled thiolate-protected gold nanoclusters driven by aluminum ion (Al3+@GSH-AuNCs). The two types of fluorophores are combined to form a ratiometric emission probe. The orange emission of Al3+ @GSH-AuNCs at 624 nm was quenched in the presence of sulfide ion owing to the strong affinity between sulfide and Au(I), while the blue GQDs fluorescence at 470 nm remained unaffected. Interestingly, the Al3+@GSH-AuNCs and GQDs were excited under the same excitation wavelength (335 nm). The response ratios (F470/F624) are linearly proportional to the sulfide concentration within the linear range of 0.02-200 µM under the optimal settings, with a limit of detection (S/N = 3) of 0.0064 µM. The proposed emission probe was applied to detect sulfide ions in tap water and wastewater specimens, with recoveries ranging from 95.3% to 103.3% and RSD% ranging from 2.3% to 3.4%, supporting the proposed method's accuracy.

Ag0 decorated Cr2S3 NPs embedded on PVP matrix: A colorimetric probe for selective and rapid detection of sulphide ions from environmental samples

Globally, the environmental pollution is one of the major issues causing toxicity towards human and aquatic life. We have developed a facile and innovative sensing approach for detection of sulphide ions (S^2-) present in the aqueous media using Ag⁰ decorated Cr₂S₃ NPs embedded on PVP matrix (Ag/Cr₂S₃-PVP). Based on the SPR phenomena, the detection of S^2- ions was established. The nanohybrid was characterized using various techniques such as UV-vis spectrophotometer, High-Resolution Transmission Electron Microscopy (HR-TEM), Thermal Gravimetric Analysis (TGA), X-ray diffraction analysis(XRD), Energy-dispersive X-ray spectroscopy (EDS), Fourier-transform infrared spectroscopy (FT-IR), Scanning Electron Microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). The yellowish colour of Ag/Cr₂S₃-PVP nanohybrid turned to brown colour in presence of S^2- ions. The selectivity and sensitivity of the prepared probe was studied against the other interfering metal ions. In addition, the effect of different concentration of S^2- ions in the nanohybrid solution was investigated and the Limit of detection (LOD) was found to be 6.6 nM. The good linearity was found over the range of 10 nM to 100 μM with R² value of 0.981. The paper strip based probe was developed for rapid onsite monitoring of S^2- ions. The proposed method is found to be cost-effective, rapid, and simple. We have validated the practical applicability of the prepared probe for determining the concentration of S^2- ions in real water samples.

An innovative study on the “on–off–on” detection of sulfur ions based on a TSPP–riboflavin fluorescent probe

In this paper, 5,10,15,20-(4-sulphonatophenyl) porphyrin (TSPP) was synthesized by a facile route and used as a fluorescent probe to construct a sensor system based on the high water solubility and high quantum yield. It was found that when riboflavin (RF) was introduced into the TSPP solution, the fluorescence intensity of TSPP decreased for the peaks at 645 nm and 700 nm based on the principle of the electrostatic attractions and hydrophobic interactions between TSPP and riboflavin. When the fluorescence emission peak of riboflavin appeared at 550 nm, the fluorescence sensor system changed from the “on” state to the “off” state. When sulfur ions (S²⁻) were further introduced into the TSPP–riboflavin system, the fluorescence intensity of riboflavin was further decreased based on the specific reaction between S²⁻ and riboflavin. However, the fluorescence signal of TSPP was restored and the fluorescence sensing system changed from the “off” state to the “on” state. Therefore, TSPP was used as a fluorescent probe to construct an “on–off–on” fluorescent sensing system, the linear range of S²⁻ detected by this system is 5.0 × 10⁻⁹ to 3.6 × 10⁻⁵ M, and the detection limit (LOD) is 1.1 × 10⁻⁹ M. The sensing system has higher accuracy and sensitivity, and it can be successfully used in the sensing of S²⁻ in real samples.

In this paper, 5,10,15,20-(4-sulphonatophenyl) porphyrin (TSPP) was synthesized by a facile route and used as a fluorescent probe to construct a sensor system based on the high water solubility and high quantum yield.

Green synthesis of hybrid papain/Ni3(PO4)2 rods electrocatalyst for enhanced oxygen evolution reaction

An eco-friendly approach was used to produce the binary papain/Ni3(PO4)2 in the presence of papain, which is derived from green papaya fruits. Rod shape Papain/Ni3(PO4)2 showed excellent OER activities in alkaline, neutral and acidic media.

Gold nanoclusters: An ultrasmall platform for multifaceted applications

Gold nanoclusters (Au NCs) with a core size below 2 nm form an exciting class of functional nano-materials with characteristic physical and chemical properties. The properties of Au NCs are more prominent and extremely different from their bulk counterparts. The synthesis of Au NCs is generally assisted by template or ligand, which impart excellent cluster stability and high quantum yield. The tunable and sensitive physicochemical properties of Au NCs open horizons for their advanced applications in various interdisciplinary fields. In this review, we briefly summarize the solution phase synthesis and origin of the characteristic properties of Au NCs. A vast review of recent research work introducing biosensors based on Au NCs has been presented along with their specifications and detection limits. This review also highlights recent progress in the use of Au NCs as bio-imaging probe, enzyme mimic, temperature sensing probe and catalysts. A speculation on present challenges and certain future prospects have also been provided to enlighten the path for advancement of multifaceted applications of Au NCs.

Advances and challenges in metallic nanomaterial synthesis and antibacterial applications

Multi-drug resistant bacterial infection has become one of the most serious threats to global public health. The preparation and application of new antibacterial materials are of great significance for solving the infection problem of bacteria, especially multi-drug resistant bacteria. The exceptional antibacterial effects of metal nanoparticles based on their unique physical and chemical properties make such systems ideal for application as antibacterial drug carriers or self-modified therapeutic agents both in vitro and in vivo. Metal nanoparticles also have admirable clinical application prospects due to their broad antibacterial spectrum, various antibacterial mechanisms and excellent biocompatibility. Nevertheless, the in vivo structural stability, long-term safety and cytotoxicity of the surface modification of metal nanoparticles have yet to be further explored and improved in subsequent studies. Herein, we summarized the research progress concerning the mechanism of metal nanomaterials in terms of antibacterial activity together with the preparation of metal nanostructures. Based on these observations, we also give a brief discussion on the current problems and future developments of metal nanoparticles for antibacterial applications.

Advances in biomedical and pharmaceutical applications of protein-stabilized gold nanoclusters

The interest in using gold nanoclusters (AuNCs) as imaging probes is growing, covering wide ranges of applications. The stabilization of AuNCs with protein ligands enhances their biomedical and pharmaceutical applications. This is due to the biocompatibility, water solubility and bioactivity of proteins. Different factors can control the optical properties of AuNCs such as protein size, amino acids content and conformational structure. Controlling the synthesis conditions can result in tuning the AuNCs excitation, emission, fluorescence intensity and physicochemical properties to fulfill different applications. NIR-emitting protein-stabilized AuNCs are promising as imaging agents for targeting and visualization of cancer in vitro and in vivo. They are promising to be included as an important part of multifunctional theranostic nanosystems, due to their potential dual functions as imaging and photosensitizing agent for photodynamic therapy. Additionally, the protein around AuNCs represents a rich environment of active functional groups that are susceptible for conjugation with various biomolecules. Protein-AuNCs can act as fluorescent probes for rapid and selective analysis of different analytes in solution, cells or biological fluids. In conclusion, the variability of protein-AuNC applications can advance research in different biomedical and pharmaceutical fields.

11-Mercaptoundecanoic acid capped gold nanoclusters with unusual aggregation-enhanced emission for selective fluorometric hydrogen sulfide determination

In present study, we discovered unusual solvent-mediated aggregation-enhanced emission (AEE) character of 11-mercaptoundecanoic acid capped gold nanoclusters (MUA-Au NCs). When aggregated in aqueous media, the MUA-Au NCs showed strong emission, which was weakened by adding ethanol. Interestingly, the suppressed emission was selectively enhanced in the presence of hydrogen sulfide (H₂S) because H₂S was absorbed onto Au NCs through the strong sulfur-gold bonding affinity. The hydrolyzed H₂S, namely, HS^-, made the Au NCs negatively charged, which aggregated again due to decreased solubility. The H₂S-mediated fluorescence enhancement can be further amplified by introducing a hydrophilic thiolate (glutathione, GSH) onto the surface of Au NCs (GSH/MUA-Au NCs), which enabled sensitive determination of H₂S. Under the optimized condition, a detection limit of 35 nM was achieved. The determination was not interfered by other anions such as F^-, Cl^-, Br^-, I^-, OAc^-, N₃^-, NO₃^-, HCO₃^-, SCN^-, SO₃^2-, and SO₄^2-. This excellent sensing performance allowed practical application of the GSH/MUA-Au NC-based sensing platform to accurate determination of H₂S in human serum samples. Graphical abstractUnusual aggregation-enhanced emission character of 11-mercaptoundecanoic acid capped gold nanoclusters is discovered and has been applied for fluorometric hydrogen sulfide detection.

A fluorescence "off-on-off" sensing platform based on bimetallic gold/silver nanoclusters for ascorbate oxidase activity monitoring

Herein, papain-protected bimetallic gold/silver nanoclusters (Au/Ag NCs) were successfully synthesized and applied for the detection of ascorbate oxidase (AAO). The doping of papain-protected Au nanoclusters with Ag enhanced the fluorescence intensity with an intense red fluorescence peak at 617 nm, and the red-emitting Au/Ag nanoclusters were further used to monitor the AAO activity. The fluorescence of Au/Ag NCs could be quenched by hydrogen peroxide (H2O2) due to the generation of hydroxyl radicals (˙OH) from the reaction of Ag/Au nanoclusters and H2O2. However, the addition of ascorbic acid (AA) effectively reacted with the free radicals and caused the fluorescence recovery of the Au/Ag NCs. Furthermore, AAO could catalyze the oxidation of AA to form dehydro-ascorbate (DHA). As a result, there was not enough AA to consume the hydroxyl radicals, which resulted in a decrease in the fluorescence of the papain-capped Au/Ag NCs. Therefore, the AAO activity can be monitored by measuring the fluorescence intensity of the red-emitting Au/Ag NCs. Moreover, the developed method for AAO detection displayed a good linear relationship from 5 to 80 mU mL-1 and the detection limit was 1.72 mU mL-1. Thus, a simple and selective method for the determination of the AAO activity was constructed and satisfactory results were obtained in real sample detection.

CLVFFA-Functionalized Gold Nanoclusters Inhibit Aβ40 Fibrillation, Fibrils' Prolongation, and Mature Fibrils' Disaggregation

The abnormal aggregation of amyloid beta (Aβ or A beta) from monomeric proteins into amyloid fibrils is an important pathological contact to Alzheimer's disease (AD). Amyloid beta 40 (Aβ40), the pivotal biomarker of AD, aggregates to form amyloid plaques. For this reason, inhibition of amyloid fibrillation had become a crucial prevention and therapeutic strategy. Usually, LVFFA is the central hydrophobic fragment of Aβ and can inhibit the aggregation of Aβ40. In this work, in order to improve the inhibitory ability of LVFFA, hexapeptide CLVFFA were conjugated at the surface of Au clusters (AuNCs) to manufacture a nanosized inhibitor, AuNCs-CLVFFA. Thioflavin T fluorescence and transmission electron microscope results showed that AuNCs-CLVFFA inhibited Aβ40 fibrillogenesis, fibrils' prolongation, and mature fibrils' disaggregation. Furthermore, AuNCs as the backbone of the inhibitor showed extraordinary inhibition ability for Aβ40 aggregation at a low AuNCs-CLVFFA concentration. Free hexapeptide CLVFFA, at the same concentration, showed almost no inhibition. Additionally, the inhibitor could maintain the optical properties of nanoclusters, and the cell viability demonstrated that the inhibitor had good biocompatibility and may potentially be applied into AD therapy or treatment.

Effect of Phosphate, Sulfate, Arsenate, and Pyrite on Surface Transformations and Chemical Retention of Gold Nanoparticles (Au-NPs) in Partially Saturated Soil Columns

The understanding of engineered nanoparticle (ENP) fate and transport in soil-water environments is important for the evaluation of potential risks of ENPs to the ecosystem and human health. The effects of pyrite grains and three types of oxyanions-sulfate, phosphate, and arsenate-on the retention of citrate-coated gold nanoparticles (citrate-Au-NPs) were studied in partially saturated soil column experiments. The mobility of Au-NP was found to be in the order: Au-NP-sulfide (originating from pyrite) > Au-NP-sulfate > citrate-Au-NP > Au-NP-arsenate > Au-NP-phosphate. Chemical retention mechanisms, including hydrogen bonding and calcium bridging, are proposed and discussed. The retention of Au-NPs in soil columns increases with the increased ability of transformed Au-NP surfaces to create strong hydrogen bonding through adsorbed oxyanions with soil surfaces. Oxyanions were also found to reduce aggregation and aggregate size of Au-NPs upon interaction with Ca²⁺ solution. While the effects of cationic substances on ENP transport and stability have been studied frequently, the results here demonstrate that anionic substances have a substantial effect on Au-NP transport and stability. Furthermore, this study highlights the importance of examining ENPs under environmentally relevant condition, and the significant effect of ENP transformations on their mobility in soils.

Direct and sensitive detection of sulfide ions based on one-step synthesis of ionic liquid functionalized fluorescent carbon nanoribbons

Despite widely reported fluorescence sensors for cations, direct detection of anions is nevertheless still rare. In this work, ionic liquid-functionalized fluorescent carbon nanoribbons (IL-CNRs) are one-step synthesized and serve as the fluorescent probes for direct and sensitive detection of sulfide ions (S²⁻). The IL-CNRs are synthesized based on electrochemical exfoliation of graphite rods in a water-IL biphasic system. The as-prepared IL-CNRs exhibit uniform structure, high crystallinity, strong blue fluorescence (absolute photoluminescence quantum yield of 11.4%), and unique selectivity towards S²⁻. Based on the fluorescence quenching of IL-CNRs by S²⁻, a fluorescence sensor is developed for direct, rapid and sensitive detection of S²⁻ in the range of 100 nM to 1 μM and 1–300 μM with a low detection limit (LOD, 85 nM). Moreover, detection of S²⁻ in a real sample (tap water) is also demonstrated.

Sensitive detection of sulfide ions is realized based on one-step synthesis of ionic liquid functionalized fluorescent carbon nanoribbons.

Revealing the Active Site of Gold Nanoparticles for the Peroxidase-Like Activity: The Determination of Surface Accessibility

Despite the fact that the enzyme-like activities of nanozymes (i.e., nanomaterial-based artificial enzymes) are highly associated with their surface properties, little is known about the catalytic active sites. Here, we used the sulfide ion (S2−)-induced inhibition of peroxidase-like activity to explore active sites of gold nanoparticles (AuNPs). The inhibition mechanism was based on the interaction with Au(I) to form Au2S, implying that the Au(I) might be the active site of AuNPs for the peroxidase-like activity. X-ray photoelectron spectroscopy (XPS) analysis showed that the content of Au(I) on the surface of AuNPs significantly decreased after the addition of S2−, which might be contributed to the more covalent Au–S bond in the formation of Au2S. Importantly, the variations of Au(I) with and without the addition of S2− for different surface-capped AuNPs were in good accordance with their corresponding peroxidase-like activities. These results confirmed that the accessible Au(I) on the surface was the main requisite for the peroxidase-like activity of AuNPs for the first time. In addition, the use of S2− could assist to determine available active sites for different surface modified AuNPs. This work not only provides a new method to evaluate the surface accessibility of colloidal AuNPs but also gains insight on the design of efficient AuNP-based peroxidase mimics.

Facile, rapid one-pot synthesis of multifunctional gold nanoclusters for cell imaging, hydrogen sulfide detection and pH sensing

In this study, we have developed a facile, rapid one-pot strategy for synthesis of orange fluorescent gold nanoclusters (MBISA-AuNCs) at room temperature by using 2-Mercapto-5-benzimidazolesulfonic acid (MBISA) as both reducing and protecting reagent. The prepared AuNCs exhibited prominent advantages including high fluorescent quantum yield, good water solubility, excellent biocompatibility and low toxicity. Based on these superior properties, the AuNCs have been multi-talented applied in cell imaging, hydrogen sulfide detection and pH sensing. Confocal fluorescence imaging showed that the MBISA-AuNCs could enter living cells and distribute in the cytoplasm. Additionally, the obtained AuNCs could visualize H₂S fluctuations in living cells without interference of autofluorescence based on their high sensitivity and selectivity detection for H₂S with a linear range of 2.7 × 10^-11-8.5 × 10^-4 M and a detection limit of 0.024 nM. Most strikingly, the AuNCs exhibited strong pH dependent behavior and responded linearly, rapidly and reversibly to minor pH fluctuations within the range of 2.01-12.00. Therefore, the AuNCs could also image pH fluctuations in live cells with negligible autofluorescence and provided a new method of analysis to visualize monitoring wide pH range change in live cells.

Detection of Sulfide Using Mercapto Tetrazine-Protected Fluorescent Gold Nanodots: Preparation of Paper-Based Testing Kit for On-Site Monitoring

This work demonstrates the development of a highly sensitive method to detect and quantify sulfide ions (S^2-) in water samples. First, we synthesized 6-mercapto-s-triazolo(4,3-b)-s-tetrazine (MTT) by the reaction between formaldehyde and 4-amino-3-hydrazino-5-mercapto-1,2,4-triazole at room temperature. The synthetic MTT was used as a capping ligand for the synthesis of gold nanodots (AuNDs) via a one-pot green method at room temperature with only a 10 min reaction time. Transmission electron microscopy images exhibited that the MTT-AuNDs have an average particle size of 1.9 nm and an emission maximum at 672 nm upon excitation at 360 nm. The synthesized highly red emissive MTT-AuNDs are used as specific fluorescent probes for the detection of S^2-. The fluorescence of MTT-AuNDs was significantly and dose-dependently quenched by the addition of S^2-. The observed fluorescence quenching was ascribed to the formation of an Au₂S complex, which was determined by Raman and mass spectroscopy. A good linearity was achieved for the increasing concentration of S^2- from 870 nM to 16 μM, and the detection limit was found to be 2 nM (S/N = 3). The S^2- detection system that is described in this study was validated and agreed well with the standard methylene blue method. Furthermore, the present sensor was examined for its use in quantifying S^2- in real water samples obtained from lakes and rivers. In addition, the specificity was checked against the most likely ion interferences in real water. Moreover, a cost-effective and viable paper-based S^2- sensor was fabricated for environmental monitoring based on the use of MTT-AuNDs. The developed system would be an environmentally friendly and easy-to-use detection device for S^2- in water.

Detection of sulfide ion and gaseous H2S using a series of pyridine-2,6-dicarboxamide based scaffolds

This work presents a series of pyridine-2,6-dicarboxamide based scaffolds with different appendages and their roles as chemosensors for the selective detection of S²⁻ ion, as well as gaseous H₂S, in primarily aqueous media.

Selective fluorescence quenching of papain-Au nanoclusters by self-polymerization of dopamine

In this paper, we synthesized a papain-stabilized fluorescent Au nanocluster (NC) probe and studied its interaction with dopamine. As fluorescence of papain-Au NCs is quenched in the presence of dopamine under alkaline conditions, we were able to establish a simple, selective analytical method for dopamine determination. By studying the fluorescence lifetime and dynamic light scattering of the NCs before and after interaction with dopamine, we found that this fluorescence quenching mechanism was possibly due to dopamine self-polymerization that produced polydopamine that cross-linked papain-Au NCs. Based on this new phenomenon, we proposed a highly selective analytical method for dopamine detection. Other small organic molecules, such as amino acids, ascorbic acid and uric acid did not interfere with dopamine detection. Dopamine in the range 20-100 μM can be linearly detected by the fluorescence quenching ratio of gold nanoclusters. Dopamine detection could be visually realized by watching color changes of papain-Au NCs under UV light or daylight, as both fluorescence and absorption of the papain-Au NCs changed during dopamine polymerization.

Cu2+-Mediated turn-on fluorescence assay for sulfide ions using glutathione-protected gold nanoclusters: enhanced sensitivity, good reusability, and cell imaging

Cu²⁺-Mediation enables turn-on fluorescence detection of S²⁻using GSH-Au NCs with good sensitivity, reusability, and applicability in cell imaging.

Fluorescent metal quantum clusters: an updated overview of the synthesis, properties, and biological applications

A brief history of metal quantum clusters, their synthesis methods, physical properties, and an updated overview of their applications is provided.