Precise stepwise recovery of platinum group metals from high-level liquid wastes based on SDB polymer-modified SiO2

Accurate separation and efficient recovery of platinum group metals (PGMs, mainly Ru, Rh and Pd) from high level liquid waste (HLLW) is a good choice for clean production and sustainable development of nuclear energy. Herein a novel SDB polymer modified silica-based amine-functionalized composite (dNbpy/SiO2-P) was synthesized for the separation and recovery of PGMs. Laser particle size analysis and BET results clarified the regular spherical and highly interconnected mesoporous structure of dNbpy/SiO2-P which is critical for the separation of PGMs. The removal percent of PGMs were over 99% on the optimized conditions. In addition, dNbpy/SiO2-P showed excellent selectivity (SFPd/M > 3805, SFRu/M > 1705, SFRh/M > 336) and repeatability (≥5). Interestingly, based on the different adsorption and desorption kinetics of PGMs, a double-column strategy is designed to solve the challenge of separating and recovering PGMs from HLLW. The enrichment factors of Pd(II), Ru(III) and Rh(III) reached 36.7, 8.2, and 1.2. The adsorption of PGMs was coordination mechanism and required the involvement of NO3- to maintain charge balance. The specific distribution of elements within the adsorbents and the changes in valence state were analyzed using depth-profiling XPS. Both depth-profiling XPS results and slope analysis revealed that the complex of dNbpy and PGMs is a 1 : 1 coordination structure. Overall, this work fills the gap that PGMs cannot be effectively separated and enriched from HLLW.

Complexation of a Nitrilotriacetate-Derived Triamide Ligand with Trivalent Lanthanides: A Thermodynamic and Crystallographic Study

Non-heterocyclic N-donor nitrilotriacetate-derived triamide ligands are one of the most promising extractants for the selective extraction separation of trivalent actinides over lanthanides, but the thermodynamics and mechanism of the complexation of this kind of ligand with actinides and lanthanides are still not clear. In this work, the complexation behaviors of N,N,N',N',N″,N″-hexaethylnitrilotriacetamide (NTAamide(Et)) with four representative trivalent lanthanides (La³⁺, Nd³⁺, Eu³⁺, and Lu³⁺) were systematically investigated by using ¹H nuclear magnetic resonance (¹H NMR), ultraviolet-visible (UV-vis) and fluorescence spectrophotometry, microcalorimetry, and single-crystal X-ray diffractometry. ¹H NMR spectroscopic titration of La³⁺ and Lu³⁺ indicates that two species of 1:2 and 1:1 metal-ligand complexes were formed in NO₃^- and ClO₄^- media. The stability constants of NTAamide(Et) with Nd³⁺ and Eu³⁺ obtained by UV-vis and fluorescence titration show that the complexing strength of NTAamide(Et) with Nd³⁺ is lower than that with Eu³⁺ in the same anionic medium, while that of the same lanthanide complex is higher in ClO₄^- medium than in NO₃^- medium. Meanwhile, the formation reactions for all metal-ligand complexes are driven by both enthalpy and entropy. The structures of lanthanide complexes in the single ClO₄^- and NO₃^- medium and the mixed one were determined to be [LnL₂(MeOH)](ClO₄)₃ (Ln = La, Nd, Eu, and Lu), [LaL₂(EtOH)₂][La(NO₃)₆], and [LaL₂(NO₃)](ClO₄)₂, separately. The average bond lengths of lanthanide complexes decrease gradually with the decrease in ionic radii of Ln³⁺, indicating that heavier lanthanides form stronger complexes due to the lanthanide contraction effect, which coincides with the trend of the complexing strength obtained by spectroscopic titration. This work not only reveals the thermodynamics and mechanism of the complexation between NTAamide ligands and lanthanides but also obtains the periodic tendency of complexation between them, which may facilitate the separation of trivalent lanthanides from actinides.

Extraction and Complexation Investigation of Palladium(II) by a Nitrilotriacetate-Derived Triamide Ligand

Effective and selective separation and recovery of the fission product palladium from high-level liquid waste are conducive not only to reducing its hazards to the public health and environment but also to alleviate the pressure on the increasing demand for natural palladium. Herein, the Pd²⁺ extraction in an HNO₃ solution with a nitrilotriacetate-derived triamide ligand NTAamide(n-Oct) and the complexation between them were investigated. Using n-octanol as a diluent, NTAamide(n-Oct) demonstrated an excellent selectivity, strong extractability, and high loading capacity for Pd²⁺ extraction. Combined with the results of single-crystal X-ray diffraction, Fourier transform infrared spectroscopy, electrospray ionization-mass spectroscopy, microcalorimetric titration, and slope analysis, the extracted complexes were determined as [PdL₂](NO₃)₂ and [PdL₂][Pd(NO₃)₄] (where L denotes the NTAamide ligand) in 0.10 and 3.0 mol/L HNO₃ solutions, respectively. The extraction model closely depended on the solvation state of Pd²⁺ in the HNO₃ solution. An ion-pair extraction model was proposed and discussed.

Highly Efficient Recovery of Ruthenium from Aqueous Solutions by Adsorption Using Dibenzo-30-Crown-10 Doped Chitosan

Ruthenium, as an industrial by-product or from natural sources, represents an important economical resource due to its specific applications. A complex problem is represented by ruthenium separation during reprocessing operations, therefore, different materials and methods have been proposed. The present study aims to develop a new material with good adsorbent properties able to be used for ruthenium recovery by adsorption from aqueous solutions. Absorbent material was obtained using chitosan (Ch) surface modification with dibenzo-30-crown-10 ether (DB30C10). Chitosan represents a well-known biopolymer with applicability in different adsorptive processes due to the presence of hydroxyl-, carboxyl-, and nitrogen-containing groups in the structure. Additionally, crown ethers are macromolecules with a good complexation capacity for metallic ions. It is expected that the adsorptive efficiency of newly prepared material will be superior to that of the individual components. New synthesized material was characterized using scanning electron microscopy coupled with energy dispersive X-ray (SEM–EDX), Fourier transform infrared spectroscopy (FT-IR), Brunauer–Emmett–Teller surface area analysis (BET), and determination of point of zero charge (pZc). Results obtained from the performed kinetic, thermodynamic, and equilibrium studies confirmed the good adsorptive capacity of the prepared material, Ch-DB30C10, obtaining a maximum adsorption capacity of 52 mg Ru(III) per gram. This adsorption capacity was obtained using a solution with an initial concentration of 275 mg L−1, at pH 2, and 298 K. Ru(III) adsorption kinetics were studied by modeling the obtained experimental data with pseudo-first order and pseudo-second order models. Desorption studies established that the optimum eluent was represented by the 5M HNO3 solution. Based on the performed studies, a mechanism for recovery of ruthenium by adsorption was proposed.

Selective Separation of Am(III)/Eu(III) by the QL-DAPhen Ligand under High Acidity: Extraction, Spectroscopy, and Theoretical Calculations

Although 1,10-phenanthroline-based ligands have recently shown vast opportunities for the separation of trivalent actinides (Ans(III)) from lanthanides (Lns(III)), the optimization and design of the extractant structure based on the phenanthroline framework remain hotspots for further improving the separation. Following the strategy of hard and soft donor atom combination, for the first time, the quinoline group was attached to the 1,10-phenanthroline skeleton, giving a lipophilic ligand, 2,9-diacyl-bis((3,4-dihydroquinoline-1((2H)-yl)-1),10-phenanthroline (QL-DAPhen)), for Am(III)/Eu(III) separation. In the presence of sodium nitrate, the ligand can effectively extract Am(III) over Eu(III) in HNO₃ solution, with the separation factor (SF_Am/Eu) ranging from 29 to 44. The coordination chemistry of Eu(III) with QL-DAPhen was investigated by slope analysis, NMR titration, UV-vis titration, Fourier transform infrared spectroscopy, electrospray ionization-mass spectrometry, and theoretical calculations. The experimental results unanimously confirm that the ligand forms both 1:1 and 1:2 complexes with Eu(III), and the stability constants (log β) of each of the two complexes were obtained. Density functional theory calculations show that the Am-N bonds have more covalent characteristics than the Eu-N bonds in the complexes, which reveals the reason why the ligand preferentially bonds with Am(III). Meanwhile, the thermodynamic analysis reveals that the 1:1 complex is more thermodynamically stable than the 1:2 complex. The findings of this work have laid a solid theoretical foundation for the application of phenanthroline-based ligands in the separation of An(III) from practical systems.

Unfolding the Extraction and Complexation Behaviors of Trivalent f-Block Elements by a Tetradentate N,O-Hybrid Phenanthroline Derived Phosphine Oxide Ligand

In this work, a tetradentate N,O-hybrid 2,9-bis(diphenylphosphine oxide)-1,10-phenanthroline (Ph₂-BPPhen) ligand was studied for the coextraction of trivalent f-block elements from nitric acid media. The extraction as well as the complexation behaviors of Ph₂-BPPhen with f-block elements were thoroughly investigated using ³¹P and ¹H NMR spectrometry, UV-vis spectrophotometry, single crystal X-ray diffraction, and density functional theoretical (DFT) calculation. Ph₂-BPPhen exhibits remarkably extraction ability for both Am(III) and Eu(III) and more than 99.5% of Am(III) and Eu(III) were extracted from 1.0 M HNO₃ solution. Slope analysis suggests that both 2:1 and 1:1 ligand/metal complexes were probably formed during the extraction. The 1:1 and 2:1 Ln(III) complexes with Ph₂-BPPhen were also identified in CH₃OH solution by NMR spectrometry, and the stability constants were determined via UV-vis spectrophotometry. Structures of the 1:1 Eu(Ph₂-BPPhen)(NO₃)₃ and Am(Ph₂-BPPhen)(NO₃)₃ complexes were further elucidated by single X-ray crystallography and DFT calculations. The higher extractability of Ph₂-BPPhen toward trivalent Am(III) and Eu(III) compared with the previously reported phenanthroline-derived amide and phosphonate ligands was attributed to the stronger affinity of the -P═O(R)₂ group to metal ions. The results from this work indicate that the N,O-hybrid 1,10-phenanthroline derived phosphine oxide ligand can serve as a new and promising candidate for coextraction of trivalent f-block elements in the treatment of nuclear waste.

Adsorption Behaviors of Palladium Ion from Nitric Acid Solution by a Silica-based Hybrid Donor Adsorbent

The adsorption behaviors of a silica-based hybrid donor adsorbent (TAMIA-EH+1-dodecanol)/SiO2-P towards Pd(II) were investigated under the effect of the contact time, temperature etc. in simulated high-level liquid waste. The adsorption rates of Pd(II) and Re(VII) were fairly fast and could reach the equilibrium state in only 1 h compared with other co-existing metal ions. The adsorption kinetics of Pd(II) was found to fit well with the pseudo-first order model. Even though with increasing the concentration of HNO3 above 1 M, the adsorption performance of (TAMIA-EH+1-dodecanol)/SiO2-P decreased gradually; it still exhibited a better selectivity towards Pd(II) when [HNO3] > 0.5 M. The adsorption isotherms of Pd(II) and Re(VII) were well-described by the Langmuir isotherm model, while the Freundlich isotherm model was considered to be more suitable for the adsorption of Ru(III), Zr(IV) and Mo(VI). A high temperature of an aqueous solution was not good for the effective recovery of Pd(II). The calculated thermodynamic parameters revealed that the adsorption of Pd(II) was exothermic in nature.

Synthesis of soft N-donor isoPentyl-BTBP and study on its removal of actinides from high level liquid waste

To directly separate actinides from high level liquid waste (HLLW), a novel molecule, i. e. isoPentyl-BTBP (6,6′-bis(5,6-bis(4-methylpentyl)-1,2,4-triazin-3-yl)-2,2′-bipyridines) was synthesized and characterized. A kind of isoPentyl-BTBP/SiO2-P adsorbent was obtained by impregnating isoPentyl-BTBP into porous silica/polymer support particles SiO2-P under reduced pressure. The effect of HNO3 concentration, contact time on the adsorption of isoPentyl-BTBP/SiO2-P towards 241Am(III) and 239Pu(IV) was studied. And the stability of isoPentyl-BTBP/SiO2-P in HNO3 medium was also evaluated. It turned out that isoPentyl-BTBP/SiO2-P had much higher affinity for 241Am(III) and 239Pu(IV) over FP elements in 3 M HNO3, fast adsorption kinetics towards 239Pu(IV), excellent stability in HNO3 medium, and should be a very promising adsorbent for separating 239Pu(IV) and 241Am(III) from HLLW.

Unusual complexation behaviors of R-BTPs with water molecule and Pd(ii) caused by electronic modulation of substituents on BTP backbone: new insights into palladium separation under the framework of minor actinides’ partitioning

A 1 : 1 solid palladium complex with any tridentate bis-triazine ligand has been isolated and structurally characterized for the first time.

Preparation and characterization of a novel macroporous silica-bipyridine asymmetric multidentate functional adsorbent and its application for heavy metal palladium removal

The effective removal of heavy metal ¹⁰⁷Pd(II) from highly active liquid waste (HLW) is very valuable for reducing its hazardous and risk to public health and environment. For this purpose, a novel silica-bipyridine multidentate functional adsorbent was synthesized by vacuum infusing a new asymmetric N-donor ligand CA-MTBP (bipyridine derivative) into the macroporous SiO₂-P support. SEM, N₂ adsorption-desorption isotherms, TGA, XRD, FT-IR, ²⁹Si solid-state NMR and XPS spectroscopy were utilized to systematically characterize the physicochemical properties of the adsorbent. The characterization results indicated that CA-MTBP was successfully immobilized onto the pores of SiO₂-P by intermolecular interaction. Strong hydrogen-bonding interactions identified by single crystal structure of the ligand and ²⁹Si NMR may play a key role in achieving this immobilization. TGA and TOC studies showed that CA-MTBP/SiO₂-P had excellent thermal stability and highly HNO₃ resistance. EDS and XPS investigations provided directly evidences for Pd(II) being selectively adsorbed onto the adsorbent. The adsorbent had excellent adsorption capability, fast adsorption kinetics and high selectivity for Pd(II) over other typical tested metals in HNO₃ media.

Synthesis and characterization of uranium(iv) tetrachloro complexes in bis-pyrazolylpyridine ligand environments

The most intriguing feature in structures2a–2dis the out-of-plane shift of the U ion from the chelate's three coordinating N atoms (grey background: molecular plane), as exemplarily shown for2band2d.