A highly-sensitive fluorescent probe for the detection of copper ions and its applications in water quality monitoring, neural cell imaging and plant imaging

High copper levels pose a risk to environmental and human health due to their toxicity and widespread industrial application, in which abnormal copper levels are associated with various diseases both in neurodegenerative diseases and plant growth. Thus, a turn-on fluorescent probe BBYD-Cu, based on donor-acceptor type structure, was designed and synthesized with easy preparations. BBYD-Cu can specifically recognized Cu2+ by 2-picolinic ester group, then released the fluorophore to enhance the fluorescent signals. With a detection limit of 31 nM, it displays extremely sensitive and precise Cu2+ detection. In addition, BBYD-Cu has the advantages of fast response speed (within 3 min), excellent selectivity and strong anti-interference ability for Cu2+. Significantly, the BBYD-Cu demonstrates superior detection and imaging performance even in intricate real-world environmental samples, biological nerve cells and plant soybean sprout root tissue.

Aminothiophenol and 7-diethylamino-4-hydroxycoumarin derived probe for reversible turn off-on-off detection of Cu2+ ions and cysteine

Here, we present a simple disulfide linked probe HTP for rapid detection of Cu2+ ions, which was prepared by a condensation reaction between 7-diethylamino-4-hydroxycoumarin aldehyde and 2-aminothiophenol. The disulfide linked probe HTP was characterized using 1H NMR, 13C NMR, and HRMS spectroscopic analysis and confirmed by single crystal X-ray diffraction analysis. The photophysical behavior of HTP in various solvents (non-polar to polar) was studied and HTP displayed aggregation induced emission (AIE) characteristics in CH3CN-water mixtures (0-99 %). Upon binding with Cu2+ ions, emission enhancement occurs along with color changes from weak green to intense yellow emission in CH3CN/Tris-HCl buffer (20 μM, 9:1, 10 mM Tris HCl Buffer, pH = 7.4). Detection limit for Cu2+ ions was found to be 0.97 nM which is lower than the recommended tolerance limit by the WHO and the association constant 0.42 × 108 M-1 was obtained using B-H plot. Furthermore, the stoichiometric ratio 1:1 was confirmed by Job's plot, 1H NMR, mass spectral analysis and DFT calculations were supported the formation of HTP-Cu2+ complex. The reversibility of HTP with Cu2+ ions was achieved by cysteine with detection limit and association constant value of 1.64 µM and 0.15 × 107 M-1 respectively. The reversible sensing nature of HTP with Cu2+/cysteine was further applied for constructing a molecular logic gate (INHIBIT) and practical applications such as paper strips, cotton swabs and real water analysis.

Fluorescence and colorimetric dual-mode sensing of copper ions and fingerprint visualization by benzimidazole derivatives

In this paper, the molecular fluorescence probe H containing an imidazole structure was designed and synthesized by forming a ring between two amino groups and one aldehyde group. The synthesized probe H exhibits a Stokes shift of 144 nm with fluorescence emission at 555 nm and excitation at 411 nm. The fluorescence of probe H was quenched by the addition of Cu2+ and accompanied a red-shift of ultraviolet-visible (UV-Vis) absorption spectrum. Probe H reveals good selectivity and high sensitivity to Cu2+ in the fluorescence and UV-Vis absorption spectrum. And the limit of detection (LOD) for Cu2+ by fluorescence and UV-Vis spectrum methods were 0.14 nmol L-1 and 1.34 μmol L-1, respectively. The binding ratio of probe H and Cu2+ is 1:1 according to the Job's plot equation. High resolution mass spectrometry (HRMS) and density function theory (DFT) calculations proved that the solvent acetonitrile and anionic chloride ion participated in the formation of H-Cu2+ complex. Furthermore, the established fluorescence analytical method was successfully applied for the detection of Cu2+ and spiked recovery experiments in tap water and mineral water. In addition, the probe exhibited outstanding solid-state fluorescence because of its excellently planar structure, and displayed a secondary fingerprint structure in the application of fingerprint detection.

Cu(II) detection by a fluorometric probe based on thiazoline-amidoquinoline derivative and its application to water and food samples

Two novel fluorescent probes for Cu2+ detection have been developed based on thiazoline-quinoline conjugates bearing a 4-ethynyl-N,N-dimethylaniline unit (QT1 and QT2). QT2 exhibits instantaneous fluorescence quenching of Cu2+ with an emissive change from bright orange to arctic blue under UV light irradiation (365 nm). The plots of I0/I against Cu2+ concentrations show a good linear relationship that ranges from 0 to 50 µM with a coefficient of determination (R2) = 0.9906 and a limit of detection (LOD) of 76 nM, which is considered low (4.84 ppb). A 1:1 complexation between QT2 and Cu2+ was confirmed by UV-Vis titration, ESI-MS, and SC-XRD. The QT2·Cu2+ complex was dissociated by the addition of EDTA. The fluorescence quenching mechanism involves the ligand-to-metal charge transfer (LMCT) of a paramagnetic Cu2+ complex. The QT2 probe on a paper-based strip was used to determine the amount of Cu2+ in water and food samples (shiitake mushrooms and oysters).

Benzothiazole-quinoline based probe for simultaneous colorimetric detection of CN- and Cu2+ ions, with fluorescence sensing for Cu2+: Mechanistic insights and practical applications in environmental monitoring and cellular analysis

The development and synthesis of notably targeted and colorimetric sensor based on an azomethine compound for the distinct recognition of Cu2+ and CN- ion individually in an aqueous dimethyl formamide solution is performed. In the presence of CN- and Cu2+, the sensor BTZ showed impressive colorimetric changes, going from pale yellow to orange and pale yellow to dark yellow, respectively. In the meantime, FL spectrum (Cu2+) and UV-vis spectroscopy (CN-/Cu2+) were used to assess the sensing features. The plausible binding mechanisms of CN- and Cu2+ ions with sensor BTZ have been studied using the 1H NMR titration, Job's plot and DFT technique. The bathochromic shift produced by the intramolecular charge transfer (ICT) transition may have been the source of the phenomenon. Furthermore, CN- ion in the commercial substance is quickly identified and measured with the naked eye by using sensor BTZ. It was found that the BTZ's LOD for CN- and Cu2+ was 0.280 × 10-7 M and 1.153 × 10-7 M, respectively. Moreover, 1:1 binding ratio for the reaction of CN- and Cu2+ ions with sensor BTZ were demonstrated by Job's plot, which was dependent on analytical data. The findings show that BTZ is an easy-to-use and practical probe for concurrently sensing cyanide and copper ions in environmental samples and living cells that have less cytotoxicity.

Sensing of Co2+ and Cu2+ Ions Using Dimethylamino-functionalized Poly(azomethine-1,3,4-oxadiazole)s

The ability of OxT and OxFl azomethines to recognize metal ions in THF solutions was investigated using UV-vis absorption techniques. Various metal ions, including Cd2+, Hg2+, Co2+, Sn2+, Cu2+, Ni2+, Zn2+ and Ag+, were tested. The absorption spectra revealed two distinct π-π* transition bands in the 273-278 nm and 330-346 nm wavelength ranges. Additionally, OxFl displayed an absorption peak at 309 nm, attributed to the fluorene group. Spectral titrations were used to study the fluorescence behavior in the presence of these metal ions. The results showed significant quenching with Co2+ and Cu2+ ions, while other metal ions had minimal effects on the fluorescence intensity. The quenching mechanism was further analyzed using the Stern-Volmer and Lehrer equations, and the binding constants ( K b fl ) were calculated using the Benesi-Hildebrand relations. The results confirm that Co2+ has a 1:2 stoichiometry and Cu2+ has a 1:1 stoichiometry, indicating the strong affinity of OxFl and OxT for these ions. The negative values of ΔG (Gibbs free energy) suggest that complex formation occurs spontaneously at room temperature.

Synthesis and spectral characterization of the phenothiazine-thiosemicarbazide probe for the optical solid-state detection of Hg2+ and Cu2

In this study, a phenothiazine-thiosemicarbazide (PTZDS) probe was synthesized and characterized. The synthesized PTZDS probe exhibited a yellow color, with a native fluorescence emission at λemission = 550 nm and λexcitation = 450 nm. Over other metal ions, the probe exhibited significant selectivity and sensitivity towards Hg2+ and Cu2+. The probe showed fluorescence quenching along with a minor shift in the absorbance spectra from 400 to 450 nm and 430 nm in the presence of Hg2+ and Cu2+, respectively. In addition, the color of the synthesized probe remarkedly faded with the addition of Hg2+ or Cu2+. Fluorescence measurements, infrared spectroscopy (IR), and density functional theory studies were employed to elucidate the binding process in the PTZDS + Cu2+ and PTZDS + Hg2+ sensor systems. Furthermore, photophysical investigations of the synthesized probe with Hg2+ and Cu2+ were performed. Finally, the probe was successfully employed as a solid-state thin layer chromatography (TLC) optical sensor for detecting Hg2+ and Cu2+ ions.

Small-Molecule Fluorescent Probes for Binding- and Activity-Based Sensing of Redox-Active Biological Metals

Although transition metals constitute less than 0.1% of the total mass within a human body, they have a substantial impact on fundamental biological processes across all kingdoms of life. Indeed, these nutrients play crucial roles in the physiological functions of enzymes, with the redox properties of many of these metals being essential to their activity. At the same time, imbalances in transition metal pools can be detrimental to health. Modern analytical techniques are helping to illuminate the workings of metal homeostasis at a molecular and atomic level, their spatial localization in real time, and the implications of metal dysregulation in disease pathogenesis. Fluorescence microscopy has proven to be one of the most promising non-invasive methods for studying metal pools in biological samples. The accuracy and sensitivity of bioimaging experiments are predominantly determined by the fluorescent metal-responsive sensor, highlighting the importance of rational probe design for such measurements. This review covers activity- and binding-based fluorescent metal sensors that have been applied to cellular studies. We focus on the essential redox-active metals: iron, copper, manganese, cobalt, chromium, and nickel. We aim to encourage further targeted efforts in developing innovative approaches to understanding the biological chemistry of redox-active metals.

Rational design of a facile camphor-based fluorescence turn-on probe for real-time tracking of hypochlorous acid in vivo and in vitro

A novel camphor-based fluorescence turn-on probe with high selectivity and sensitivity was developed for HClO detection, and it was successfully employed for real-time imaging of exogenous and endogenous HClO in living cells as well as in living zebrafish.

A Highly Selective Turn-on Fluorescent and Naked-eye Colourimetric Dual-channel Probe for Cyanide Anions Detection in Water Samples

A highly selective turn-on fluorescent and naked-eye colourimetric dual-channel probe for cyanide anions (CN-) has been designed and characterized. In the mixed solution (DMSO / H₂O, 9:1, v / v), only CN- could cause an increase in the UV absorption intensity and the corresponding fluorescence intensity increased, and other anions had no significant effect on the probe. After treatment with cyanide in the probe solution, the solution showed a noticeable colour change, from light yellow to purple. Moreover, a fluorescence spectrophotometer can be used to observe that the fluorescence intensity of the solution is significantly enhanced. The response of the colourimetric and fluorescent dual-channel probe to CN- was attributed to nucleophilic addition, and the mechanism was determined by ¹H NMR spectroscopy. In addition, this probe was used to detect CN- in actual water samples, including river water, drinking water, and tap water. The spiked CN- recovery rate is very high (97.2%-100.06%), and analytical precision is also very high (RSD < 2%), which shows its feasibility and reliability for detecting cyanide ions in actual water samples.

Experimental and Theoretical Studies on a Simple S-S-Bridged Dimeric Schiff Base: Selective Chromo-Fluorogenic Chemosensor for Nanomolar Detection of Fe2+ & Al3+ Ions and Its Varied Applications

A simple S-S (disulfide)-bridged dimeric Schiff base probe, L, has been designed, synthesized, and successfully characterized for the specific recognition of Al3+ and Fe2+ ions as fluorometric and colorimetric "turn-on" responses in a dimethylformamide (DMF)-H2O solvent mixture, respectively. The probe L and each metal ion bind through a 1:1 complex stoichiometry, and the plausible sensing mechanism is proposed based on the inhibition of the photoinduced electron transfer process (PET). The reversible chemosensor L showed high sensitivity toward Al3+ and Fe2+ ions, which was analyzed by fluorescence and UV-vis spectroscopy techniques up to nanomolar detection limits, 38.26 × 10-9 and 17.54 × 10-9 M, respectively. These experimental details were advocated by density functional theory (DFT) calculations. The practical utility of the chemosensor L was further demonstrated in electrochemical sensing, in vitro antimicrobial activity, molecular logic gate function, and quantification of the trace amount of Al3+ and Fe2+ ions in real water samples.

A simple fluorescent probe for the fast sequential detection of copper and biothiols based on a benzothiazole derivative

A simple benzothiazole fluorescent chemosensor was developed for the fast sequential detection of Cu²⁺ and biothiols through modulating the excited-state intramolecular proton transfer (ESIPT) process. The compound 1 exhibits highly selective and sensitive fluorescence "on-off" recognition to Cu²⁺ with a 1:1 binding stoichiometry by ESIPT hinder. The in situ generated 1-Cu²⁺ complex can serve as an "on-off" fluorescent probe for high selectivity toward biothiols via Cu²⁺ displacement approach, which exerts ESIPT recovery. It is worth pointing out that the 1-Cu²⁺ complex shows faster for cysteins (within 1min) than other biothiols such as homocysteine (25min) and glutathione (25min). Moreover, the compound 1 displays 160nm Stoke-shift for reversibly monitoring Cu²⁺ and biothiols. In addition, the probe is successfully used for fluorescent cellular imaging. This strategy via modulation the ESIPT state has been used for determination of Cu²⁺ and Cys with satisfactory results, which further demonstrates its value of practical applications.

Cellular membrane-anchored fluorescent probe with aggregation-induced emission characteristics for selective detection of Cu2+ ions

The exploration of advanced fluorescent probes that can detect divalent copper (Cu²⁺) in aqueous environments and even in live organisms is particularly valuable for understanding the occurrence and development of Cu²⁺-related diseases. In this work, we report the design and synthesis of an aggregation-induced emission luminogen (AIEgen)-based probe (TPE-Py-EEGTIGYG) by integrating an AIEgen, TPE-Py, with a peptide, EEGTIGYG, which can selectively detect Cu²⁺ in both aqueous solution and live cells. Peptide EEGTIGYG has dual functionality in the probe design, namely improving water solubility and providing specific cell membrane-binding ability. TPE-Py-EEGTIGYG can self-assemble into nanoaggregates at high concentration in aqueous solution (e.g., 25 μM), which possess large fluorescence output due to the restriction of intramolecular rotation of the phenyl rings on TPE-Py. The fluorescence of the TPE-Py-EEGTIGYG nanoaggregates can be significantly quenched by Cu²⁺ but not by other metal ions, achieving the selective detection of Cu²⁺ in aqueous media. Furthermore, TPE-Py-EEGTIGYG can exist as a molecular species and is very weakly fluorescent in dilute aqueous solution (e.g., 5 μM), but can however largely switch on its fluorescence upon specifically anchoring onto the cell membrane. The emissive probes on the cell membrane can be used for the detection of Cu²⁺ ions that move in and out of cells with a fluorescence “turn-off” mode.

A highly sensitive and fast responsive naphthalimide-based fluorescent probe for Cu2+ and its application

The response of the probe L to Cu²⁺ is reversible and very fast (20 s). L has a low detection limit of 49 nM and was used for imaging of Cu²⁺ in MCF-7 cells with satisfying results. The sensor L can be analyzed with a molecular logic gate.