Sulfate-based anionic diblock copolymer nanoparticles for efficient occlusion within zinc oxide

Interfacial Supra-Assembly of Copolymer Nanoparticles Enables the Formation of Nanocomposite Crystals with a Tunable Internal Structure

It is highly desirable but technically challenging to precisely control the spatial composition and internal structure of crystalline nanocomposite materials, especially in a one-pot synthetic route. Herein, we demonstrate a versatile pathway to tune the spatial distribution of guest species within a host inorganic crystal via an incorporation strategy. Specifically, well-defined block copolymer nanoparticles, poly(methacrylic acid)x-block-poly(styrene-alt-N-phenylmaleimide)y [PMAAx-P(St-alt-NMI)y], are synthesized by polymerization-induced self-assembly. Such anionic nanoparticles can supra-assemble onto the surface of larger cationic nanoparticles via an electrostatic interaction, forming colloidal nanocomposite particles (CNPs). Remarkably, such CNPs can be incorporated into calcite single crystals in a spatially controlled manner: the depth of CNPs incorporation into calcite is tunable. Systematic investigation indicates that this interesting phenomenon is governed by the colloidal stability of CNPs, which in turn is dictated by the PMAAx-P(St-alt-NMI)y adsorption density and calcium ion concentration. This study opens up a general and efficient route for the preparation of a wide range of crystalline nanocomposite materials with a controlled internal composition and structure.

Synergistic Effect of Hydroxyl and Carboxyl Groups on Promoting Nanoparticle Occlusion within Calcite

Direct occlusion of guest nanoparticles into host crystals enables the straightforward preparation for various of nanocomposite materials with emerging properties. Therefore, it is highly desirable to elucidate the 'design rules' that govern efficient nanoparticle occlusion. Herein, a series of sterically-stabilized nanoparticles are rationally prepared, where the surface stabilizer chains of such nanoparticles are composed of either poly(methacrylic acid), or poly(glycerol monomethacrylate), or poly((2-hydroxy-3-(methacryloyloxy)propyl)serine). Systematic investigation reveals that hydroxyl groups and carboxyl groups play a synergistic role in driving nanoparticle incorporation into calcite crystals, where the hydroxyl groups enhance colloidal stability of the nanoparticles and the carboxyl groups provide binding sites for efficient occlusion. The generality of these findings is further validated by extending it to polymer-stabilized gold nanoparticles. This study demonstrates that precision synthesis of polymer stabilizers comprising of synergistic functional groups can significantly promote nanoparticle occlusion, thus enabling the efficient construction of organic-inorganic hybrid materials via nanoparticle occlusion strategy.

Metal-Organic Frameworks@Calcite Composite Crystals

The direct incorporation of guest crystals into another type of host crystals during the formation of the latter is technically challenging due to the large difference in surface energy for different crystalline components. Nevertheless, we herein demonstrate that metal-organic frameworks (MOFs, UiO-66-NH₂ as a model guest crystal) after postsynthetic modification with poly(methacrylic acid) can be efficiently incorporated into calcite single crystals, forming a unique composite structure where the MOF crystals are uniformly distributed throughout the whole calcite host crystals. Remarkably, such MOF@calcite composite crystals exhibit superior performance in fluoride removal compared with the MOF or calcite alone. Moreover, this incorporation strategy is general as it can be extended to other guest particles. In principle, this study opens up a versatile avenue for the rational design and preparation of a wide range of hybrid functional materials with controllable compositions and enhanced physicochemical properties.

Polymer-Inorganic Crystalline Nanocomposite Materials via Nanoparticle Occlusion

Efficient occlusion of guest nanoparticles into host single crystals opens up a straightforward and versatile way to construct functional crystalline nanocomposites. This new technique has attracted increasing research interest because it enables the composition, structure and property of the resulting nanocomposites to be well-controlled. In this review article, we aim to provide a comprehensive summary of nanoparticle occlusion within inorganic crystals. First, we summarize recently-developed strategies for the occlusion of various colloidal particles (e.g., diblock copolymer nanoparticles, polymer-modified inorganic nanoparticles, oil droplets, etc.) within host crystals (e.g., CaCO₃ , ZnO or ZIF-8). Second, new results pertaining to spatially-controlled occlusion and the physical mechanism of nanoparticle occlusion are briefly discussed. Finally, we highlight the physicochemical properties and potential applications of various functional nanocomposite crystals constructed via nanoparticle occlusion and we also offer our perspective on the likely future for this research topic. This article is protected by copyright. All rights reserved.

RAFT miniemulsion polymerisation of benzyl methacrylate using non-ionic surfactant

RAFT miniemulsion polymerisation of benzyl methacrylate using a non-ionic surfactant affords latexes with controllable molar mass, narrow molar mass distributions and tuneable particle diameter.

Exerting Spatial Control During Nanoparticle Occlusion within Calcite Crystals

In principle, nanoparticle occlusion within crystals provides a straightforward and efficient route to make new nanocomposite materials. However, developing a deeper understanding of the design rules underpinning this strategy is highly desirable. In particular, controlling the spatial distribution of the guest nanoparticles within the host crystalline matrix remains a formidable challenge. Herein, we show that the surface chemistry of the guest nanoparticles and the [Ca²⁺ ] concentration play critical roles in determining the precise spatial location of the nanoparticles within calcite crystals. Moreover, in situ studies provide important mechanistic insights regarding surface-confined nanoparticle occlusion. Overall, this study not only provides useful guidelines for efficient nanoparticle occlusion, but also enables the rational design of patterned calcite crystals using model anionic block copolymer vesicles.

Supramolecular Chirality in Azobenzene-Containing Polymer System: Traditional Postpolymerization Self-Assembly Versus In Situ Supramolecular Self-Assembly Strategy

Recently, the design of novel supramolecular chiral materials has received a great deal of attention due to rapid developments in the fields of supramolecular chemistry and molecular self-assembly. Supramolecular chirality has been widely introduced to polymers containing photoresponsive azobenzene groups. On the one hand, supramolecular chiral structures of azobenzene-containing polymers (Azo-polymers) can be produced by nonsymmetric arrangement of Azo units through noncovalent interactions. On the other hand, the reversibility of the photoisomerization also allows for the control of the supramolecular organization of the Azo moieties within polymer structures. The construction of supramolecular chirality in Azo-polymeric self-assembled system is highly important for further developments in this field from both academic and practical points of view. The postpolymerization self-assembly strategy is one of the traditional strategies for mainly constructing supramolecular chirality in Azo-polymers. The in situ supramolecular self-assembly mediated by polymerization-induced self-assembly (PISA) is a facile one-pot approach for the construction of well-defined supramolecular chirality during polymerization process. In this review, we focus on a discussion of supramolecular chirality of Azo-polymer systems constructed by traditional postpolymerization self-assembly and PISA-mediated in situ supramolecular self-assembly. Furthermore, we will also summarize the basic concepts, seminal studies, recent trends, and perspectives in the constructions and applications of supramolecular chirality based on Azo-polymers with the hope to advance the development of supramolecular chirality in chemistry.

Efficient Occlusion of Nanoparticles within Inorganic Single Crystals

In principle, the incorporation of guest nanoparticles within host crystals should provide a straightforward and versatile route to a wide range of nanocomposite materials. However, crystallization normally involves expelling impurities, so nanoparticle occlusion is both counter-intuitive and technically challenging. Clearly, the nanoparticles should have a strong interaction with the growing crystalline lattice, but quantifying such an affinity has been challenging; the basic principles that govern efficient nanoparticle occlusion within inorganic single crystals are rather poorly understood. In the past few years, we have focused on the elucidation of robust design rules for such systems; our progress is summarized in this article.Polymerization-induced self-assembly (PISA) is widely recognized as a powerful platform technology for the preparation of a broad range of model organic nanoparticles. Herein, PISA was exploited to prepare sterically stabilized diblock copolymer nano-objects (e.g., spheres, worms, or vesicles) of varying size using steric stabilizers of well-defined chain length, variable anionic charge density, tunable surface density, and adjustable chemical functionality (e.g., carboxylic acid, phosphate, sulfate or sulfonate groups). Thus, we were able to systematically investigate how such structural parameters influence nanoparticle occlusion. Given its commercial importance for many industrial sectors, calcium carbonate was selected as the model host crystal for nanoparticle occlusion studies. Perhaps surprisingly, the extent of nanoparticle occlusion is not particularly sensitive to nanoparticle size or morphology. However, the steric stabilizer chain length can play a key role: relatively short chains lead to surface-confined occlusion, while sufficiently long chains enable uniform nanoparticle occlusion to be achieved throughout the crystal lattice (albeit sometimes inducing a significant change in crystal morphology). Optimizing the anionic charge density and surface density of the stabilizer chains is required to maximize the extent of nanoparticle occlusion, while steric stabilizer chains comprising anionic carboxylate groups led to greater occlusion compared to those composed of phosphate, sulfate, or sulfonate groups when examining a model vesicle system.Subsequently, our occlusion studies were extended to include functional hybrid nanocomposite crystals. For example, the spatially controlled occlusion of poly(glycerol monomethacrylate)-stabilized gold nanoparticles was achieved within semiconductive ZnO crystals by either controlling the nanoparticle concentration or by delaying their addition to the reaction mixture. Moreover, oil droplets of up to 500 nm have been incorporated into calcite crystals at up to 11% by mass, despite the large mismatch in surface energy between the hydrophobic oil droplets and the ionic crystal lattice. We have also explored a "Trojan horse" strategy, whereby cargos comprising nanoparticles or soluble dye molecules are first encapsulated within anionic block copolymer vesicles prior to their incorporation within calcite crystals. This approach offers a generic and efficient strategy for the occlusion of many types of guest species into single crystals. In summary, we have established important guidelines for efficient nanoparticle occlusion within crystals, which opens up new avenues for the synthesis of next-generation hybrid materials.

Investigating the influence of solvent quality on RAFT-mediated PISA of sulfonate-functional diblock copolymer nanoparticles

Solvent quality has a marked impact on the assembly of sulfonate-functional diblock copolymer nanoparticles prepared by PISA.

Efficient occlusion of oil droplets within calcite crystals

It is well known that oil and water do not mix. Similarly, the incorporation of oil droplets within inorganic crystals is highly counter-intuitive because there is a large difference in surface energy for these two components. Nevertheless, herein we demonstrate the efficient occlusion of ∼250-500 nm oil droplets within 20-40 μm calcite crystals. These droplets are stabilized using various amphiphilic poly(methacrylic acid)-poly(n-alkyl methacrylate) diblock copolymer emulsifiers. Both copolymer concentration and diblock compositions affect the extent of occlusion, with optimized conditions producing calcite crystals containing up to 11% oil by mass. Moreover, compressive forces exerted by the growing crystals cause significant deformation of the oil droplets during occlusion. In principle, this protocol enables the incorporation of water-insoluble dyes or hydrophobic nanoparticles within calcite, which is a cheap, naturally-occurring and environmentally-benign mineral. The single crystal nature of this host lattice ensures efficient retention of such guests, while lowering the solution pH leads to triggered release via acid dissolution.

Spatially Controlled Occlusion of Polymer-Stabilized Gold Nanoparticles within ZnO

In principle, incorporating nanoparticles into growing crystals offers an attractive and highly convenient route for the production of a wide range of novel nanocomposites. Herein we describe an efficient aqueous route that enables the spatially controlled occlusion of gold nanoparticles (AuNPs) within ZnO crystals at up to 20 % by mass. Depending on the precise synthesis protocol, these AuNPs can be (i) solely located within a central region, (ii) uniformly distributed throughout the ZnO host crystal or (iii) confined to a surface layer. Remarkably, such efficient occlusion is mediated by a non-ionic water-soluble polymer, poly(glycerol monomethacrylate)₇₀ (G₇₀ ), which is chemically grafted to the AuNPs; pendent cis-diol side groups on this steric stabilizer bind Zn²⁺ cations, which promotes nanoparticle interaction with the growing ZnO crystals. Finally, uniform occlusion of G₇₀ -AuNPs within this inorganic host leads to faster UV-induced photodegradation of a model dye.

Combining the power of heat and light: temperature-programmed photoinitiated RAFT dispersion polymerization to tune polymerization-induced self-assembly

A novel temperature-programmed photo-PISA method which combines the power of heat and light is developed for the preparation of a diverse set of morphologies.

Alcohol-based PISA in batch and flow: exploring the role of photoinitiators

Polymerization-induced self-assembly (PISA) via PhotoRAFT (photoinduced reversible addition–fragmentation radical transfer) was investigated in polar solvents via continuous flow reactors.

Heparin-Mimicking Sulfonated Polymer Nanoparticles via RAFT Polymerization-Induced Self-Assembly

Heparin plays a significant role in wound healing and tissue regeneration applications, through stabilization of fibroblast growth factors (FGF). Risks associated with batch-to-batch variability and contamination from its biological sources have led to the development of synthetic, highly sulfonated polymers as promising heparin mimics. In this work, a systematic study of an aqueous polymerization-induced self-assembly (PISA) of styrene from poly(2-acrylamido-2-methylpropane sodium sulfonate) (P(AMPS)) macro reversible addition-fragmentation chain transfer (macro-RAFT) agents produced a variety of spherical heparin-mimicking nanoparticles, which were further characterized with light scattering and electron microscopy techniques. None of the nanoparticles tested showed toxicity against mammalian cells; however, significant hemolytic activity was observed. Nonetheless, the heparin-mimicking nanoparticles outperformed both heparin and linear P(AMPS) in cellular proliferation assays, suggesting increased bFGF stabilization efficiencies, possibly due to the high density of sulfonated moieties at the particle surface.

Anionic block copolymer vesicles act as Trojan horses to enable efficient occlusion of guest species into host calcite crystals

We report a versatile 'Trojan Horse' strategy using highly anionic poly(methacrylic acid)-poly(benzyl methacrylate) vesicles to incorporate two types of model payloads, i.e. either silica nanoparticles or an organic dye (fluorescein), within CaCO3 (calcite). Uniform occlusion of silica-loaded vesicles was confirmed by scanning electron microscopy, while thermogravimetry studies indicated extents of vesicle occlusion of up to 9.4% by mass (∼33% by volume). Efficient dye-loaded vesicle occlusion produces highly fluorescent calcite crystals as judged by fluorescence microscopy. In control experiments, silica nanoparticles alone are barely occluded, while only very weakly fluorescent calcite crystals are obtained when using just the fluorescein dye. This new 'Trojan Horse' strategy opens up a generic route for the efficient occlusion of various nanoparticles and organic molecules within inorganic host crystals.

Expanding the Scope of Polymerization-Induced Self-Assembly: Z-RAFT-Mediated Photoinitiated Dispersion Polymerization

In this communication, we developed the first well-controlled Z-RAFT (RAFT = reversible addition-fragmentation chain transfer) mediated polymerization-induced self-assembly (PISA) formulation based on photoinitiated RAFT dispersion polymerization of tert-butyl acrylate (tBA) in ethanol/water (60/40, w/w) at room temperature using a Z-type macromolecular chain transfer agent (macro-CTA). Polymerizations proceeded rapidly via the exposure of visible-light irradiation (405 nm, 0.45 mW/cm²) with high monomer conversion (>95%) being achieved within 1 h. A variety of polymer nano-objects (spheres, worms, and vesicles) with narrow molar mass distributions were prepared by this Z-RAFT mediated PISA formulation. Silver nanoparticles were loaded with the vesicles via in situ reduction, which can be used as a catalyst for the reduction of methylene blue (MB) in the presence of NaBH₄. Finally, gel permeation chromatography (GPC) analysis demonstrated that the corona block and the core-forming block could be cleaved by treating with excess initiator. This novel PISA formulation will greatly expand the scope of PISA and provide more mechanistic insights into the PISA research.

Giant Pickering Droplets: Effect of Nanoparticle Size and Morphology on Stability

The interaction between a pair of millimeter-sized nanoparticle-stabilized n-dodecane droplets was analyzed using a high-speed video camera. The droplets were grown in the presence of either poly(glycerol monomethacrylate)-poly(benzyl methacrylate) (PGMA-PBzMA) diblock copolymer spheres or poly(glycerol monomethacrylate)-poly(2-hydroxypropyl methacrylate)-poly(benzyl methacrylate) (PGMA-PHPMA-PBzMA) triblock copolymer worms prepared by polymerization-induced self-assembly. The effect of nanoparticle morphology on droplet coalescence was analyzed by comparing 22 nm spheres to highly anisotropic worms with a mean worm width of 26 nm and comparable particle contact angle. Both morphologies lowered the interfacial tension, providing direct evidence for nanoparticle adsorption at the oil-water interface. At 0.03 w/v % copolymer, an aging time of at least 90 s was required to stabilize the n-dodecane droplets in the presence of the worms, whereas no aging was required to produce stable droplets when using the spheres, suggesting faster diffusion of the latter to the surface of the oil droplets. The enhanced stability of the sphere-coated droplets is consistent with the higher capillary pressure in this system as the planar interfaces approach. However, the more strongly adsorbing worms ultimately also confer stability. At lower copolymer concentrations (≤0.01 w/v %), worm adsorption promoted droplet stability, whereas the spheres were unable to stabilize droplets even after longer aging times. The effect of mean sphere diameter on droplet stability was also assessed while maintaining an approximately constant particle contact angle. Small spheres of either 22 or 41 nm stabilized n-dodecane droplets, whereas larger spheres of either 60 or 91 nm were unable to prevent coalescence when the two droplets were brought into contact. These observations are consistent with the greater capillary pressure stabilizing the oil-water interfaces coated with the smaller spheres. Addition of an oil-soluble polymeric diisocyanate cross-linker to either the 60 or the 91 nm spheres produced highly stable colloidosomes, thus confirming adsorption of these nanoparticles.

Polymerization-Induced Self-Assembly of Homopolymer and Diblock Copolymer: A Facile Approach for Preparing Polymer Nano-Objects with Higher-Order Morphologies

Polymerization-induced self-assembly of homopolymer and diblock copolymer using a binary mixture of small chain transfer agent (CTA) and macromolecular chain transfer agent (macro-CTA) is reported. With this system, homopolymer and diblock copolymer were formed and chain extended at the same time to form polymer nano-objects. The molar ratio of homopolymer and diblock copolymer had a significant effect on the morphology of the polymer nano-objects. Porous vesicles, porous nanospheres, and micron-sized particles with highly porous inner structure were prepared by this method. We expect that this method will greatly expand the promise of polymerization-induced self-assembly for the synthesis of a range of polymer nano-objects with unique morphologies.

Adding a solvophilic comonomer to the polymerization-induced self-assembly of block copolymer and homopolymer: a cooperative strategy for preparing large compound vesicles

We report a RAFT dispersion polymerization of styrene and 4-vinylpyridine in methanol/water at 70 °C. The polymerization was mediated by a binary mixture of DDMAT and mPEG₄₅-DDMAT.

An insight into aqueous photoinitiated polymerization-induced self-assembly (photo-PISA) for the preparation of diblock copolymer nano-objects

Photoinitiated polymerization-induced self-assembly (photo-PISA) is utilized to investigate the sole effect of reaction temperature on PISA.

Polymerization induced self-assembly: tuning of morphology using ionic strength and pH

It is demonstrated how the morphology of polymeric nanoparticles produced via polymerization-induced self-assembly (PISA) in dispersion can be conveniently tuned via the pH and ionic strength.

Phenyl acrylate is a versatile monomer for the synthesis of acrylic diblock copolymer nano-objects via polymerization-induced self-assembly

Poly(phenyl acrylate) has a sufficiently high glass transition temperature to enable TEM studies of the morphology of diblock copolymer nano-objects prepared using three different polymerization-induced self-assembly (PISA) formulations.

Occlusion of Sulfate-Based Diblock Copolymer Nanoparticles within Calcite: Effect of Varying the Surface Density of Anionic Stabilizer Chains

Polymerization-induced self-assembly (PISA) offers a highly versatile and efficient route to a wide range of organic nanoparticles. In this article, we demonstrate for the first time that poly(ammonium 2-sulfatoethyl methacrylate)-poly(benzyl methacrylate) [PSEM–PBzMA] diblock copolymer nanoparticles can be prepared with either a high or low PSEM stabilizer surface density using either RAFT dispersion polymerization in a 2:1 v/v ethanol/water mixture or RAFT aqueous emulsion polymerization, respectively. We then use these model nanoparticles to gain new insight into a key topic in materials chemistry: the occlusion of organic additives into inorganic crystals. Substantial differences are observed for the extent of occlusion of these two types of anionic nanoparticles into calcite (CaCO₃), which serves as a suitable model host crystal. A low PSEM stabilizer surface density leads to uniform nanoparticle occlusion within calcite at up to 7.5% w/w (16% v/v), while minimal occlusion occurs when using nanoparticles with a high PSEM stabilizer surface density. This counter-intuitive observation suggests that an optimum anionic surface density is required for efficient occlusion, which provides a hitherto unexpected design rule for the incorporation of nanoparticles within crystals.

Alcoholic Photoinitiated Polymerization-Induced Self-Assembly (Photo-PISA): A Fast Route toward Poly(isobornyl acrylate)-Based Diblock Copolymer Nano-Objects

We report a fast alcoholic photoinitiated polymerization-induced self-assembly (photo-PISA) formulation via photoinitiated RAFT dispersion polymerization of isobornyl acrylate (IBOA) in an ethanol/water mixture at 40 °C using a monomethoxy poly(ethylene glycol) (mPEG) based chain transfer agent. Polymerization proceeded rapidly via the exposure to visible light irradiation (405 nm, 0.5 mW/cm²), and high monomer conversion (>95%) was achieved within 30 min. Kinetic studies confirmed that good control was maintained during the photo-PISA process, and the polymerization can be activated or deactivated by light. Finally, we demonstrated that a diverse set of complex morphologies (spheres, worms, or vesicles) could be achieved by varying reaction parameters, and a phase diagram was constructed.

A Critical Appraisal of RAFT-Mediated Polymerization-Induced Self-Assembly

Recently, polymerization-induced self-assembly (PISA) has become widely recognized as a robust and efficient route to produce block copolymer nanoparticles of controlled size, morphology, and surface chemistry. Several reviews of this field have been published since 2012, but a substantial number of new papers have been published in the last three years. In this Perspective, we provide a critical appraisal of the various advantages offered by this approach, while also pointing out some of its current drawbacks. Promising future research directions as well as remaining technical challenges and unresolved problems are briefly highlighted.

Photo-PISA: Shedding Light on Polymerization-Induced Self-Assembly

Herein we report an aqueous photoinitiated polymerization-induced self-assembly (photo-PISA) for the preparation of a remarkably diverse set of complex polymer nanoparticle morphologies (e.g., spheres, worms, and vesicles) at room temperature. Ultrafast polymerization rates were achieved, with near quantitative monomer conversion within 15 min of visible light irradiation. An important feature of the photo-PISA is that diblock copolymer vesicles can be prepared under mild conditions (room temperature, aqueous medium, visible light), which will be important for the preparation of functional vesicles loaded with biorelated species (e.g., proteins). As a proof of concept, silica nanoparticles and bovine serum albumin (BSA) were encapsulated in situ within vesicles via the photo-PISA process.