Ultra-fast electron capture by electrosterically-stabilized gold nanoparticles

Core-shell structured gold nanoparticles as carrier for 166Dy/166Ho in vivo generator

Background

Radionuclide therapy (RNT) has become a very important treatment modality for cancer nowadays. Comparing with other cancer treatment options, sufficient efficacy could be achieved in RNT with lower toxicity. β⁻ emitters are frequently used in RNT due to the long tissue penetration depth of the β⁻ particles. The dysprosium-166/holmium-166 (¹⁶⁶Dy/¹⁶⁶Ho) in vivo generator shows great potential for treating large malignancies due to the long half-life time of the mother nuclide ¹⁶⁶Dy and the emission of high energy β⁻ from the daughter nuclide ¹⁶⁶Ho. However, the internal conversion occurring after β⁻ decay from ¹⁶⁶Dy to ¹⁶⁶Ho could cause the release of about 72% of ¹⁶⁶Ho when ¹⁶⁶Dy is bound to conventional chelators. The aim of this study is to develop a nanoparticle based carrier for ¹⁶⁶Dy/¹⁶⁶Ho in vivo generator such that the loss of the daughter nuclide ¹⁶⁶Ho induced by internal conversion is prevented. To achieve this goal, we radiolabelled platinum-gold bimetallic nanoparticles (PtAuNPs) and core–shell structured gold nanoparticles (AuNPs) with ¹⁶⁶Dy and studied the retention of both ¹⁶⁶Dy and ¹⁶⁶Ho under various conditions.

Results

The ¹⁶⁶Dy was co-reduced with gold and platinum precursor to form the ¹⁶⁶DyAu@AuNPs and ¹⁶⁶DyPtAuNPs. The ¹⁶⁶Dy radiolabelling efficiency was determined to be 60% and 70% for the two types of nanoparticles respectively. The retention of ¹⁶⁶Dy and ¹⁶⁶Ho were tested in MiliQ water or 2.5 mM DTPA for a period of 72 h. In both cases, more than 90% of both ¹⁶⁶Dy and ¹⁶⁶Ho was retained. The results show that the incorporation of ¹⁶⁶Dy in AuNPs can prevent the escape of ¹⁶⁶Ho released due to internal conversion.

Conclusion

We developed a chelator-free radiolabelling method for ¹⁶⁶Dy with good radiolabelling efficiency and very high stability and retention of the daughter nuclide ¹⁶⁶Ho. The results from this study indicate that to avoid the loss of the daughter radionuclides by internal conversion, carriers composed of electron-rich materials should be used.

Supplementary Information

The online version contains supplementary material available at 10.1186/s41181-022-00170-3.

Deep Eutectic Solvents as Catalysts for Upgrading Biomass

Deep eutectic solvents (DESs) have emerged as promising green solvents, due to their versatility and properties such as high biodegradability, inexpensiveness, ease of preparation and negligible vapor pressure. Thus, DESs have been used as sustainable media and green catalysts in many chemical processes. On the other hand, lignocellulosic biomass as an abundant source of renewable carbon has received ample interest for the production of biobased chemicals. In this review, the state of the art of the catalytic use of DESs in upgrading the biomass-related substances towards biofuels and value-added chemicals is presented, and the gap in the knowledge is indicated to direct the future research.

On the Primary Water Radicals' Production in the Presence of Gold Nanoparticles: Electron Pulse Radiolysis Study

Gold nanoparticles are known to cause a radiosensitizing effect, which is a promising way to improve radiation therapy. However, the radiosensitization mechanism is not yet fully understood. It is currently assumed that gold nanoparticles can influence various physical, chemical, and biological processes. Pulse radiolysis is a powerful tool that can examine one of the proposed effects of gold nanoparticles, such as increased free radical production. In this work, we shed light on the consequence of ionizing radiation interaction with gold nanoparticles by direct measurements of solvated electrons using the pulse radiolysis technique. We found that at a therapeutically relevant gold concentration (<3 mM atomic gold, <600 μg × cm⁻³), the presence of gold nanoparticles in solution does not induce higher primary radicals’ formation. This result contradicts some hypotheses about free radical formation in the presence of gold nanoparticles under ionizing radiation previously reported in the literature.

Low sample volume origami-paper-based graphene-modified aptasensors for label-free electrochemical detection of cancer biomarker-EGFR

In this work, an electrochemical paper-based aptasensor was fabricated for label-free and ultrasensitive detection of epidermal growth factor receptor (EGFR) by employing anti-EGFR aptamers as the bio-recognition element. The device used the concept of paper-folding, or origami, to serve as a valve between sample introduction and detection, so reducing sampling volumes and improving operation convenience. Amino-functionalized graphene (NH₂-GO)/thionine (THI)/gold particle (AuNP) nanocomposites were used to modify the working electrode not only to generate the electrochemical signals, but also to provide an environment conducive to aptamer immobilization. Electrochemical characterization revealed that the formation of an insulating aptamer-antigen immunocomplex would hinder electron transfer from the sample medium to the working electrode, thus resulting in a lower signal. The experimental results showed that the proposed aptasensor exhibited a linear range from 0.05 to 200 ngmL^-1 (R ² = 0.989) and a detection limit of 5 pgmL^-1 for EGFR. The analytical reliability of the proposed paper-based aptasensor was further investigated by analyzing serum samples, showing good agreement with the gold-standard enzyme-linked immunosorbent assay.

Influence of confinement on free radical chemistry in layered nanostructures

The purpose of the present work was to study how chemical reactions and the electronic structure of atoms are affected by confinement at the sub-nanometer scale. To reach this goal, we studied the H atom in talc, a layered clay mineral. Talc is a highly 2D-confining material with the width of its interlayer space close to angstrom. We investigated talc with a particle accelerator-based spectroscopic method that uses elementary particles. This technique generates an exotic atom, muonium (Mu), which can be considered as an isotope of the H atom. Moreover, the technique allows us to probe a single atom (H atom) at any time and explore the effects of the layered clay on a single ion (proton) or atom. The cation/electron recombination happens in two time windows: one faster than a nanosecond and the other one at longer than microseconds. This result suggests that two types of electron transfer processes take place in these clay minerals. Calculations demonstrated that the interlayer space acts as a catalytic surface and is the primary location of cation/electron recombination in talc. Moreover, the studies of the temperature dependence of Mu decay rates, due to the formation of the surrogate of H2, is suggestive of an "H2" formation reaction that is thermally activated above 25 K, but governed by quantum diffusion below 25 K. The experimental and computational studies of the hyperfine coupling constant of Mu suggest that it is formed in the interlayer space of talc and that its electronic structure is extremely changed due to confinement. All these results imply that the chemistry could be strongly affected by confinement in the interlayer space of clays.

Deep Eutectic Solvents for Pretreatment, Extraction, and Catalysis of Biomass and Food Waste

Valorization of lignocellulosic biomass and food residues to obtain valuable chemicals is essential to the establishment of a sustainable and biobased economy in the modern world. The latest and greenest generation of ionic liquids (ILs) are deep eutectic solvents (DESs) and natural deep eutectic solvents (NADESs); these have shown great promise for various applications and have attracted considerable attention from researchers who seek versatile solvents with pretreatment, extraction, and catalysis capabilities in biomass- and biowaste-to-bioenergy conversion processes. The present work aimed to review the use of DESs and NADESs in the valorization of biomass and biowaste as pretreatment or extraction solvents or catalysis agents.

Design and Synthesis of Ionic Liquid-Based Matrix Metalloproteinase Inhibitors (MMPIs): A Simple Approach to Increase Hydrophilicity and to Develop MMPI-Coated Gold Nanoparticles

Selective and potent matrix metalloproteinase 12 (MMP-12) inhibitors endowed with improved hydrophilicity are highly sought for potential use in the treatment of lung and cardiovascular diseases. In the present paper, we modified the structure of a nanomolar MMP-12 inhibitor by incorporating an ionic liquid (IL) moiety to improve aqueous solubility. Four biologically active salts were obtained by linking the sulfonamide moiety of the MMP-12 inhibitor to imidazolium-, pyrrolidinium-, piperidinium-, and DABCO-based ILs. The imidazolium-based bioactive salt was tested on human recombinant MMPs and on monocyte-derived dendritic cells, showing activity similar to that of the parent compound, but improved water solubility. The imidazolium-based bioactive salt was then used to prepare electrostatically stabilized MMP inhibitor-coated gold nanoparticles (AuNPs) able to selectively bind MMP-12. These AuNPs were used to study subcellular localization of MMP-12 in monocyte-derived dendritic cells by transmission electron microscopy analysis.

Naked Gold Nanoparticles and hot Electrons in Water

The ionizing radiation in aqueous solutions of gold nanoparticles, stabilized by electrostatic non-covalent intermolecular forces and steric interactions, with antimicrobial compounds, are investigated with picosecond pulse radiolysis techniques. Upon pulse radiolysis of an aqueous solution containing very low concentrations of gold nanoparticles with naked surfaces available in water (not obstructed by chemical bonds), a change to Cerenkov spectrum over a large range of wavelengths are observed and pre-solvated electrons are captured by gold nanoparticles exclusively (not by ionic liquid surfactants used to stabilize the nanoparticles). The solvated electrons are also found to decay rapidly compared with the decay kinetics in water. These very fast reactions with electrons in water could provide an enhanced oxidizing zone around gold nanoparticles and this could be the reason for radio sensitizing behavior of gold nanoparticles in radiation therapy.

Continuous In-Flight Synthesis for On-Demand Delivery of Ligand-Free Colloidal Gold Nanoparticles

We demonstrate an entirely new method of nanoparticle chemical synthesis based on liquid droplet irradiation with ultralow (<0.1 eV) energy electrons. While nanoparticle formation via high energy radiolysis or transmission electron microscopy-based electron bombardment is well-understood, we have developed a source of electrons with energies close to thermal which leads to a number of important and unique benefits. The charged species, including the growing nanoparticles, are held in an ultrathin surface reaction zone which enables extremely rapid precursor reduction. In a proof-of-principle demonstration, we obtain small-diameter Au nanoparticles (∼4 nm) with tight control of polydispersity, in under 150 μs. The precursor was almost completely reduced in this period, and the resultant nanoparticles were water-soluble and free of surfactant or additional ligand chemistry. Nanoparticle synthesis rates within the droplets were many orders of magnitude greater than equivalent rates reported for radiolysis, electron beam irradiation, or colloidal chemical synthesis where reaction times vary from seconds to hours. In our device, a stream of precursor loaded microdroplets, ∼15 μm in diameter, were transported rapidly through a cold atmospheric pressure plasma with a high charge concentration. A high electron flux, electron and nanoparticle confinement at the surface of the droplet, and the picoliter reactor volume are thought to be responsible for the remarkable enhancement in nanoparticle synthesis rates. While this approach exhibits considerable potential for scale-up of synthesis rates, it also offers the more immediate prospect of continuous on-demand delivery of high-quality nanomaterials directly to their point of use by avoiding the necessity of collection, recovery, and purification. A range of new applications can be envisaged, from theranostics and biomedical imaging in tissue to inline catalyst production for pollution remediation in automobiles.

Facile room temperature deposition of gold nanoparticle-ionic liquid hybrid film on silica substrate

This work presents facile synthesis of gold nanoparticle (Au NP)-ionic liquid hybrid film of <10nm by a simple two-step process at room temperature by deposition of Au NPs suspended in 1-hexyl-1methyl-pyrolidinium bromide, on Si (111) substrates. FTIR results demonstrated that ionic liquid properties remain unaltered during and after Au NP synthesis, and even coating on Si (111) substrate. XRD, XPS, and XAS spectral data confirm the presence of Au(0) while EXAFS data indicated the presence of small particles or incomplete surface species. Cross-sectional analysis using FE-SEM and edge length measurement using AFM showed that the film thickness is ca 10nm.