Ag/g-C3N4 catalyst with superior catalytic performance for the degradation of dyes: a borohydride-generated superoxide radical approach

A review on reactive oxygen species-induced mechanism pathways of pharmaceutical waste degradation: Acetaminophen as a drug waste model

Innately designed to induce physiological changes, pharmaceuticals are foreknowingly hazardous to the ecosystem. Advanced oxidation processes (AOPs) are recognized as a set of contemporary and highly efficient methods being used as a contrivance for the removal of pharmaceutical residues. Since reactive oxygen species (ROS) are formed in these processes to interact and contribute directly toward the oxidation of target contaminant(s), a profound insight regarding the mechanisms of ROS leading to the degradation of pharmaceuticals is fundamentally significant. The conceptualization of some specific reaction mechanisms allows the design of an effective and safe degradation process that can empirically reduce the environmental impact of the micropollutants. This review mainly deliberates the mechanistic reaction pathways for ROS-mediated degradation of pharmaceuticals often leading to complete mineralization, with a focus on acetaminophen as a drug waste model.

g-C3N4 as ballistic electron transport "Tunnel" in CsPbBr3-based ternary photocatalyst for gas phase CO2 reduction

Perovskite CsPbBr3 quantum dot shows great potential in artificial photosynthesis, attributed to its outstanding optoelectronic properties. Nevertheless, its photocatalytic activity is hindered by insufficient catalytic active sites and severe charge recombination. In this work, a CsPbBr3@Ag-C3N4 ternary heterojunction photocatalyst is designed and synthesized for high-efficiency CO2 reduction. The CsPbBr3 quantum dots and Ag nanoparticles are chemically anchored on the surface of g-C3N4 sheets, forming an electron transfer tunnel from CsPbBr3 quantum dots to Ag nanoparticles via g-C3N4 sheets. The resulting CsPbBr3@Ag-C3N4 ternary photocatalyst, with spatial separation of photogenerated carriers, achieves a remarkable conversion rate of 19.49 μmol·g-1·h-1 with almost 100 % CO selectivity, a 3.13-fold enhancement in photocatalytic activity as compared to CsPbBr3 quantum dots. Density functional theory calculations reveal the rapid CO2 adsorption/activation and the decreased free energy (0.66 eV) of *COOH formation at the interface of Ag nanoparticles and g-C3N4 in contrast to the g-C3N4, leading to the excellent photocatalytic activity, while the thermodynamically favored CO desorption contributes to the high CO selectivity. This work presents an innovative strategy of constructing perovskite-based photocatalyst by modulating catalyst structure and offers profound insights for efficient CO2 conversion.

Photocatalytic Activity of Ag Nanoparticles Deposited on Thermoexfoliated g-C3N4

The limited access to fresh water and the increased presence of emergent pollutants (EPs) in wastewater has increased the interest in developing strategies for wastewater remediation, including photocatalysis. Graphitic carbon nitride (g-C3N4) is a 2D non-metal material with outstanding properties, such as a 2.7 eV bandgap and physicochemical stability, making it a promising photocatalyst. This work reports the process of obtaining high-surface-area (SA) g-C3N4 using the thermal-exfoliation process and the posterior effect of Ag-nanoparticle loading over the exfoliated g-C3N4 surface. The photocatalytic activity of samples was evaluated through methylene blue (MB) degradation under visible-light radiation and correlated to its physical properties obtained by XRD, TEM, BET, and UV-Vis analyses. Moreover, 74% MB degradation was achieved by exfoliated g-C3N4 compared to its bulk counterpart (55%) in 180 min. Moreover, better photocatalytic performances (94% MB remotion) were registered at low Ag loading, with 5 wt.% as the optimal value. Such an improvement is attributed to the synergetic effect produced by a higher SA and the role of Ag nanoparticles in preventing charge-recombination processes. Based on the results, this work provides a simple and efficient methodology to obtain Ag/g-C3N4 photocatalysts with enhanced photocatalytic performance that is adequate for water remediation under sunlight conditions.

Photocatalytic boron nitride-based nanomaterials for the removal of selected organic and inorganic contaminants in aqueous solution: A review

Boron nitride (BN) coupled with various conventional and advanced photocatalysts has been demonstrated to exhibit extraordinary activity for photocatalytic degradation because of its unique properties, including a high surface area, constant wide-bandgap semiconducting property, high thermal-oxidation resistance, good hydrogen-adsorption performance, and high chemical/mechanical stability. However, only limited reviews have discussed the application of BN or BN-based nanomaterials as innovative photocatalysts, and it does not cover the recent results and the developments on the application of BN-based nanomaterials for water purification. Herein, we present a complete review of the present findings on the photocatalytic degradation of different contaminants by various BN-based nanomaterials. This review includes the following: (i) the degradation behavior of different BN-based photocatalysts for various contaminants, such as selected dye compounds, pharmaceuticals, personal care products, pesticides, and inorganics; (ii) the stability/reusability of BN-based photocatalysts; and (iii) brief discussion for research areas/future studies on BN-based photocatalysts.

Ag-modified g-C3N4 with enhanced activity for the photocatalytic reduction of hexavalent chromium in the presence of EDTA under ultraviolet irradiation

The photocatalytic reduction of Cr6+ to Cr3+ in an aqueous solution, using 3 wt% Ag/g-C3N4 in the presence of ethylenediaminetetraacetic acid (EDTA), has been investigated here. The photocatalytic reduction of Cr6+ with pure g-C3N4 was very low. The addition of Ag and EDTA can significantly improve the photocatalytic reduction of Cr6+ using g-C3N4. In the presence of EDTA, the efficiency with Ag/g-C3N4 was better than those with Au/g-C3N4 and Cu/g-C3N4. With EDTA, the reduction rate constant increased from 0.0005 for pure g-C3N4 to 0.12 min-1 for 3 wt% Ag/g-C3N4. By increasing the concentration of EDTA from 0 to 500 mg L-1, the reduction efficiency of Cr6+ increased extremely, and the rate constant raised from 0.008 to 0.12 min-1. The optimal EDTA concentration was 500 mg L-1 for the photocatalyst Ag/g-C3N4. The Ag-EDTA complex may be reduced to metallic silver by the conduction band electrons of g-C3N4. The electron-hole recombination was significantly suppressed by the electron trapping of Ag. EDTA may act in by the formation of Cr3+-complex and the separation of Cr3+ from the g-C3N4 surface and by the valence band hole scavenger of g-C3N4. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray photoelectron spectroscopy (XPS), UV-Vis diffuse reflectance spectroscopy (DRS) and photoluminescence spectra (PL) were used to characterize g-C3N4 and Ag/g-C3N4 nanoparticles. A possible mechanism for photocatalytic Cr6+ reduction has also been demonstrated.

Oxidation of tetracycline hydrochloride with a photoenhanced MIL-101(Fe)/g-C3N4/PMS system: Synergetic effects and radical/nonradical pathways

MIL-101(Fe)-based catalysts have been widely used for degradation of organic pollutants based on peroxymonosulfate (PMS) activation. Hence, a facile calcination and hydrothermal method was used in this study to prepare a MIL-101(Fe)/g-C₃N₄ composite catalyst with high activity and high stability for PMS activation to degrade tetracycline hydrochloride (TC) under visible-light irradiation. We clearly elucidated the mechanism involved in the MIL-101(Fe)/g-C₃N₄ photo Fenton-catalyzed PMS activation process by separating the PMS activation and pollutant oxidation processes. The synergetic effects of MIL-101(Fe) and g-C₃N₄ involved MIL-101(Fe) acting as an electron shuttle mediating electron transfer from the organic substrate to PMS, accompanied by redox cycling of the surface Fe(II)/Fe(III). Multiple experimental results indicated that PMS was bound to the surface of MIL-101(Fe)/g-C₃N₄ during visible irradiation and generation of sulfate radicals (SO₄^•-), hydroxyl radicals (•OH) and superoxide anion free radicals (•O₂^-) for the radical pathway and singlet oxygen (¹O₂) and holes (h⁺) for the nonradical pathway. The major degradation pathways for TC can be described as demethylation, deamination, deamidation and carbonylation. This work provides valuable information and advances the fundamental understanding needed for design and syntheses of metal-free conjugated polymers modified by metal-organic frameworks for heterogeneous photo-Fenton reactions.

Emerging and Promising Multifunctional Nanomaterial for Textile Application Based on Graphitic Carbon Nitride Heterostructure Nanocomposites

Nanocomposites constructed with heterostructures of graphitic carbon nitride (g-C₃N₄), silver (Ag), and titanium dioxide (TiO₂) have emerged as promising nanomaterials for various environmental, energy, and clinical applications. In the field of textiles, Ag and TiO₂ are already recognized as essential nanomaterials for the chemical surface and bulk modification of various textile materials, but the application of composites with g-C₃N₄ as a green and visible-light-active photocatalyst has not yet been fully established. This review provides an overview of the construction of Ag/g-C₃N₄, TiO₂/g-C₃N₄, and Ag/TiO₂/g-C₃N₄ heterostructures; the mechanisms of their photocatalytic activity; and the application of photocatalytic textile platforms in the photochemical activation of organic synthesis, energy generation, and the removal of various organic pollutants from water. Future prospects for the functionalization of textiles using g-C₃N₄-containing heterostructures with Ag and TiO₂ are highlighted.

Increasing electron density by surface plasmon resonance for enhanced photocatalytic CO2 reduction

The photocatalytic CO₂ reduction reaction is a multi-electron process, which is greatly affected by the surface electron density. In this work, we synthesize Ag clusters supported on In₂O₃ plasmonic photocatalysts. The Ag-In₂O₃ compounds show remarkedly enhanced photocatalytic activity for CO₂ conversion to CO compared to pristine In₂O₃. In the absence of any co-catalyst or sacrificial agent, the CO evolution rate of optimal Ag-In₂O₃-10 is 1.56 μmol/g/h, achieving 5.38-folds higher than that of In₂O₃ (0.29 μmol/g/h). Experimental verification and DFT calculation demonstrate that electrons transfer from Ag clusters to In₂O₃ on Ag-In₂O₃ compounds. In Ag-In₂O₃ compounds, Ag clusters serving as electron donators owing to the SPR behaviour are not helpful to decline photo-induced charge recomnation rate, but can provide more electron for photocatalytic reaction. Overall, the Ag clusters promote visible-light absorption and accelerate photocatalytic reaction kinetic for In₂O₃, resulting in the photocatalytic activity enhancement of Ag-In₂O₃ compounds. This work puts insight into the function of plasmonic metal on enhancing photocatalysis performance, and provides a feasible strategy to design and fabricate efficient plasmonic photocatalysts.

Synergistic Effect between CO2 Chemisorption Using Amino-Modified Carbon Nitride and Epoxide Activation by High-Energy Electrons for Plasmon-Assisted Synthesis of Cyclic Carbonates

Photocatalytic CO₂ cycloaddition is a promising approach for CO₂ value-added processes. However, the efficiency of plasmon-assisted CO₂ cycloaddition still needs to be improved and the reaction mechanism is unclear. Herein, g-C₃N₄/Ag (ACN-Ag) hybrids exhibited superior activity of CO₂ cycloaddition by coupling a semiconductor into the plasmonic system, in which the ACN grafting amino group by the formation of carbon vacancies can enhance CO₂ chemisorption; meanwhile, photo-generated electrons from ACN transfer to Ag to form high-energy electrons, which can activate propylene oxide, accelerating the ring-opening step. Importantly, photo-generated electron injection from ACN to Ag and the interaction between Ag nanoparticles and ACN were confirmed by single-particle photoluminescence spectroscopy. The wavelength-dependent activity demonstrated that the plasmon excitation is crucial for the reaction. Moreover, in situ single-particle PL quenching caused by propylene oxide and in situ electron paramagnetic resonance verified the activation of propylene oxide by ACN-Ag. This work is conducive to an in-depth understanding of the mechanism of CO₂ cycloaddition at the single-particle level and provides guidance for the organic synthesis.

Mechanistic insights of removing pollutant in adsorption and advanced oxidation processes by sludge biochar

With the accelerated industrialization, more and more sewage sludge (SS) needs to be treated properly. The conversion of sludge into harmless biochar material with dual utilization value of adsorption and catalysis by pyrolysis is in line with the concept of sustainable development. However, the reaction mechanisms of pristine sludge biochar (SDBC) and its composites (SDBCs) in adsorption, persulfate (PS), and Fenton-like advanced oxidation processes (AOPs) are very closely related to its adsorption performance and catalytic efficiency. In this paper, from the application mechanisms of SDBC in adsorption and AOPs, we review in detail the common methods for synthesizing SDBC and their characteristics. We discuss the synthesis techniques that affect the structural, chemical, and catalytic properties of SDBC, including gasification, pyrolysis, and hydrothermal carbonation (HTC). The pyrolysis temperature, environmental factors, and sludge characteristics have important effects on the properties of SDBC, leading to different mechanisms in adsorption and catalytic processes. Furthermore, this paper systematically generalizes the mechanisms of SDBCs in adsorption, where π-π interactions and electrostatic attractions are the main adsorption mechanisms. Then, activation mechanisms of SDBCs in PS and Fenton-like AOPs systems are discussed, including free radical pathways and non-free radical pathways. Finally, we present several challenges and perspectives for the application of SDBC and SDBCs in the field of adsorption, PS, and Fenton-like AOPs from the mechanistic point of views.

Synthesis of carbon-based nanomaterials and their application in pollution management

With the fast development of industry, large amounts of organic and inorganic pollutants are inevitably released into the natural environment, which results in the pollution of the environment and are thereby dangerous to human health. The efficient elimination of these pollutants is crucial to environment protection and human health. The high sorption capacity of carbon-based materials and high photocatalytic ability of carbon-based composites result in the application of carbon-based materials in environmental pollution cleanup. In this review article, we summarized recent studies on the synthesis of carbon-based materials, and their application in the sorption of organic and inorganic pollutants, the photocatalytic degradation of organic pollutants, and the in situ photocatalytic reduction-solidification of heavy metal ions. The sorption method is useful to remove pollutants from aqueous solutions. The sorption-photocatalytic degradation of organic pollutants is applicable, especially at low concentrations, whereas the catalytic reduction of metal ions is the best method for the in situ immobilization of high valent metal ions under complicated conditions. The interaction mechanism is discussed using advanced spectroscopy analysis and theoretical calculations, and at the end the challenges in the future are described.

Recent developments in architecturing the g-C3N4 based nanostructured photocatalysts: Synthesis, modifications and applications in water treatment

Water pollution is becoming an inevitable problem in today's world. Tons and tons of wastewater with hazardous pollutants are getting discharged into the clean water bodies every day. In this regard, photocatalytic environmental remediation using nanotechnology such as the use of organic, metal and non-metal based semiconductor photocatalysts for photodegradation of pollutants has gained enormous attention in the past few decades. This review is focused particularly on graphitic carbon nitride (g-C₃N₄) which is a cheap, metal-free, polymeric photoactive compound and it is used as a potential photocatalyst in wastewater treatment. Though, pristine g-C₃N₄ is a good photocatalyst, it has certain drawbacks such as poor visible light absorption capacity, quicker recombination of photoelectrons and holes, delayed mass and charge transfer, etc. As a result, the pristine g-C₃N₄ catalyst is modified into novel 0D, 1D, 2D and 3D morphologies such as nano-quantum dots, nanorods, nanotubes, nanowires, nanosheets, nanoflakes, nanospheres, nanoshells, etc. It was also tailored into novel composites along with various compounds through doping, metal deposition, heterojunction formation, etc., to enhance the photocatalytic property of pure g-C₃N₄. The modified catalysts showed promising photocatalytic performance such as degradation of majority of pollutants in the environment. It also showed excellent results in the removal or reduction of heavy metals. This review provides a detailed record of g-C₃N₄ and its diverse photocatalytic applications in the past years and it provides knowledge for the development of such similar novel compounds in the future.

Dye Removal Ability of Pure and Doped Graphitic Carbon Nitride

Background:

Rapid escalation in textile, paper, pesticides, pharmaceuticals and several other chemical based manufacturing industries due to amplification in human requirements have proportionately contributed to the extreme contamination of water ecosystem, resulted from the discharge of toxic pollutants from industries. Effluents from textile industries are comprised of coloured dyes like Rhodamine B, Methyl Orange, Methylene Blue and phenolic compounds which deserve special mention owing to their non-biodegradable, carcinogenic and severe detrimental nature. Urgent needs to ameliorate this fast declining environmental situation are of immense necessity in current scenario.

Objectives:

Objectives: In this regard, graphitic carbon nitride (GCN) is a distinguished material for water purification-based applications because of its exclusive characteristics making it highly prospective for degradation of toxic dyes from water by catalysis and adsorption techniques. GCN has been a material of conspicuous interest in recent times owing to its two dimensional sheets like structure with favourable surface area, and cost-effective synthesis approaches along with high production yield. This article presents a detail study of different aspects of GCN as a material of potential for water purification. Through extensive literature survey it has been shown that GCN is an effective material to be used in the fields of application. Several effective procedures like catalysis or adsorption for removal of dyes from water have been discussed with their basic science behind.

Conclusions:

This systematic effort shows that GCN can be considered to be one of the most efficient water purifier with further advantages arising from its easy and cost effective large scale synthesis.

The synergistic effect of PMS activation by LaCoO3/g-C3N4 for degradation of tetracycline hydrochloride: performance, mechanism and phytotoxicity evaluation

A LaCoO3/g-C3N4 catalyst with high stability was designed and used for PMS activation to degrade TC.

Self-Assembled Silver Nanoparticles Decorated on Exfoliated Graphitic Carbon Nitride/Carbon Sphere Nanocomposites as a Novel Catalyst for Catalytic Reduction of Cr(VI) to Cr(III) from Wastewater and Reuse for Photocatalytic Applications

Silver nanoparticles decorated on an exfoliated graphitic carbon nitride/carbon sphere (AgNP/Eg-C₃N₄/CS) nanocomposites were synthesized by an adsorption method with a self-assembled process. These nanoparticles were characterized by different techniques like UV-visible (UV-vis) spectroscopy, photoluminescence (PL) spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), thermal gravimetric analysis (TGA), Raman spectroscopy, scanning electron spectroscopy (SEM), transmission electron spectroscopy (TEM), electrochemical impedance spectroscopy (EIS), and ζ potential. AgNP/Eg-C₃N₄/CS nanocomposites showed a higher catalytic reduction activity for the conversion of Cr(VI) into Cr(III) with formic acid (FA) at 45 °C when compared to bulk graphitic carbon nitride (Bg-C₃N₄, Eg-C₃N₄, CS, and Eg-C₃N₄/CS). The kinetic rate constants were determined as a function of catalyst dosage, concentration of Cr(VI), pH, and temperature for the AgNP/Eg-C₃N₄/CS nanocomposite. This material showed higher reduction efficiency (98.5%, k = 0.0621 min^-1) with turnover frequency (0.0158 min^-1) for the reduction of Cr(VI) to Cr(III). It also showed great selectivity and high stability after six repeated cycles (98.5%). Further, the reusability of the Cr(III)-AgNP/Eg-C₃N₄/CS nanocomposite was also investigated for the photocatalytic degradation of methylene blue (MB) under visible light irradiation with various time intervals and it showed good degradation efficiency (α = 97.95%). From these results, the AgNP/Eg-C₃N₄/CS nanocomposite demonstrated higher catalytic activity, improved environmental friendliness, lower cost for the conversion of toxic Cr(VI) to Cr(III) in solutions, and also good reusability.

Efficient Photocatalytic Degradation of Organic Dyes by AgNPs/TiO2/Ti3C2T x MXene Composites under UV and Solar Light

Due to their broad applications in various industrial activities, and their well-known negative impacts on the aquatic environment, organic dyes have been continuously identified as serious threat to the quality of ecosystems. The photocatalytic degradation process in aqueous solutions has emerged as an efficient and reliable approach for the removal of organic dyes. MXenes, a new class of two-dimensional (2D) nanomaterials, possess unique chemical composition, surface functionalities, and physicochemical properties. Such characteristics enable MXenes to act as efficient catalysts or cocatalysts to photodegrade organic molecules. This work explores the application of Ti₃C₂T _x MXene decorated with silver and palladium nanoparticles, using a simple hydrothermal treatment method, for the photocatalytic degradation of methylene blue (MB) and rhodamine B (RhB). The chemical composition of these photocatalysts, as well as their structural properties and morphology, was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) techniques. The photocatalytic degradation abilities of the pristine MXene and the synthesized MXene composites were investigated under ultraviolet and solar light irradiation. A significant improvement in the photocatalytic performances was observed for all oxidized MXene composites when compared to pristine MXene, with a superior degradation efficiency achieved for AgNPs/TiO₂/Ti₃C₂T _x . This work broadens the application range of oxidized MXene composites, providing an alternative material for degrading organics dyes and wastewater treatment applications.

Graphitic Carbon Nitride as a Platform for the Synthesis of Silver Nanoclusters

Graphitic carbon nitride (CN) synthetized by the thermal polycondensation of melamine at 550 °C for 4 h was further exfoliated by heating at 500 °C for 3 h. Silver cations were adsorbed on the exfoliated graphitic carbon nitride (CNE) and then reduced by sodium borohydride forming silver nanoclusters (NCs) with a size of less than 1 nm. The NCs were located on the CNE surface and did not change the CNE properties except for its pore size distribution and thereby specific surface area (SSA). The Ag NCs were able to collect the photoinduced electrons of CNE and thus reduce their recombination with the holes. It was also documented by the increase in the CNE photocatalytic activity in terms of the degradation of antibiotic Ofloxacin. This study demonstrates the ability of CNE to serve as a platform for a simple and fast synthesis of Ag NCs without any stabilizing compounds.

A hydrophilic-hydrophobic graphitic carbon nitride@silver hybrid substrate for recyclable surface-enhanced Raman scattering-based detection without the coffee-ring effect

There is growing interest in developing a multifunctional surface-enhanced Raman scattering (SERS) substrate to deal with the challenge in the pretreatment-free detection and degradation of hazardous organic pollutants in water. Herein, a hydrophilic-hydrophobic graphitic carbon nitride@silver (g-C₃N₄@Ag) hybrid substrate was exploited as a potential candidate for the recyclable detection of dye molecules. Such a sophisticated substrate not only showed a significant SERS activity with a high enhancement factor of 3.21 × 10⁶ triggered by the significantly aggregated Ag nanoparticles, but also possessed an outstanding self-cleaning property via visible-light irradiation. Furthermore, the effective weakening of the coffee-ring effect was also facilitated by the hydrophilic-hydrophobic structure, resulting in excellent uniformity and reproducibility. Ultimately, the applicability of the developed recyclable SERS substrate in the monitoring of trace malachite green was demonstrated. It is expected that the innovative SERS substrate has great potential for application in highly sensitive, stable, and recyclable on-site analysis, especially for organic pollutant treatment and environmental protection.

Enzyme-free sandwich-type electrochemical immunosensor for CEA detection based on the cooperation of an Ag/g-C3N4-modified electrode and Au@SiO2/Cu2O with core-shell structure

Effective signal amplification is a prerequisite for electrochemical immunosensors to achieve ultra-sensitive detection. In this work, we prepared a sandwich-type electrochemical immunosensor for the quantitative detection of carcinoembryonic antigen (CEA). As a base platform, Ag NPs modified aminated two-dimensional nitrogen carbide nanosheets (Ag/g-C₃N₄) have good biocompatibility and conductivity. In addition, with the layered structure of Au@SiO₂/Cu₂O as the signal label, the response current value of H₂O₂ was monitored by the Amperometric i-t Curve (i-t), so as to realize the accurate measurement of CEA. The presence of SiO₂ nanoframes not only reduces the agglomeration of Au NPs and Cu₂O but also provides good biocompatibility to facilitate the connection of secondary antibodies. Finally, we also verified the signal amplification mechanism of the immunosensor through XPS and other means, and calculated the kinetic parameters of the signal tag, which proved the good peroxidase-like activity of Au@SiO₂/Cu₂O. Under the best test conditions, the prepared immunosensor has a detection range from 0.01 pg/mL to 80 ng/mL, and the detection limit is as low as 0.0038 pg/mL. The results show that the immunosensor has good analytical performance and it can provide a new method for the clinical diagnosis of CEA.

Au nanoparticle-controlled formation of metallic and oxidized Pt nanoparticles on graphitic carbon nitride nanosheets for H2 evolution

Surface decoration of noble-metal cocatalysts on graphitic phase carbon nitride (g-C3N4) with high efficiency and trace content for water splitting is exciting but difficult to achieve. Herein, we report the anchoring of Au and metallic/oxidized Pt nanoparticles (NPs) on g-C3N4 as cocatalysts via a photoreduction process for enhancing photocatalytic H2 production. Au NPs are preferentially decorated on g-C3N4, which can control the formation of metallic/oxidized Pt complex species. The well dispersed Au and metallic/oxidized Pt NPs improved the light-harvesting and the photo-generated carrier separation of g-C3N4. G-C3N4 sequentially decorated with Au (0.3 wt%) and metallic/oxidized Pt (0.3 wt%) cocatalysts, exhibited the highest and stable H2 evolution rates of 2560 and 139 μmol h-1 g-1 under simulated sunlight and visible light (λ ≥ 420 nm) irradiation, respectively, compared to the samples that are simultaneously and sequentially decorated with the same content of Pt and Au on g-C3N4. The enhanced photocatalytic activity is attributed to the synergistic effect of Au and metallic/oxidized Pt cocatalysts, i.e., the effective localized surface plasma resonance coupling between Pt and Au NPs, as well as electron-sink function of metallic Pt, which promote the generation and transfer of more carriers from g-C3N4 to the Pt species, in addition to the superior hydrogen evolution capacity of metallic and oxidized Pt. This work maximizes the performance of noble-metal cocatalysts with minimized content and provides the possibility of realizing efficient solar-to-fuel conversion.

Photodegradation of tartrazine dye favored by natural sunlight on pure and (Ce, Ag) co-doped ZnO catalysts

In this work, the synthesis of pure and (Ce, Ag) co-doped ZnO was successfully accomplished using a solvothermal process. The synthesized samples were characterized by ultraviolet-visible spectroscopy, X-ray diffraction, and scanning electron microscopy. The photocatalytic ability of the samples is estimated through degradation of tartrazine in aqueous solution under photocatalytic conditions. The degradation study carried out for a reaction period of 90 min at and a free pH = 6.0 found that dye degradation is 44.82% for pure ZnO and 98.91% for (Ce, Ag) co-doped ZnO samples, indicating its excellent photocatalytic ability. Tartrazine mineralization was also studied by calculating the degradation of chemical oxygen demand. The effect of operating parameters such as catalyst dose, initial concentration of tartrazine, initial reaction pH, and nature of light source has been optimized for tartrazine degradation as a function of time. The reusability of ZnO and (Ce, Ag) co-doped ZnO catalysts was studied and its photocatalytic efficiency was found to be unchanged, even after six cycles of use. The mechanism of photocatalytic activity was also proposed.

Fabrication of novel magnetic CuS/Fe3O4/GO nanocomposite for organic pollutant degradation under visible light irradiation

The magnetic nanocomposites composed of copper sulphide, iron oxide, and graphene oxide (CuS/Fe₃O₄/GO) were synthesized through a facile sol-gel combined with hydrothermal techniques for photodegradation of methylene blue (MB) as a model organic pollutant. The as-prepared samples were characterized by powder X-ray diffraction (XRD), vibrating sample magnetometer (VSM), differential reflectance spectroscopy (DRS), Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FESEM), and energy dispersive X-ray analysis (EDX) and results confirmed successful synthesis of magnetic nanocomposite. Presence of Fe₃O₄ and GO in nanocomposite induced a synergistic effect in CuS performance as CS₈₈F₆G₆ (i.e. 88% CuS, 6% Fe₃O₄, and 6% GO). The photocatalytic degradation efficiency of MB reached up to 90.3% after exposure to visible light irradiation for 80 min. The composite nanosheets are photostable, reusable, and magnetically recoverable, revealing potential application in removal of organic pollutants.

Facet Engineering of Pd Nanocrystals for Enhancing Photocatalytic Hydrogenation: Modulation of the Schottky Barrier Height and Enrichment of Surface Reactants

Metal cocatalyst loading is one of the most widely explored strategies in promoting photocatalytic solar energy conversion. Engineering surface-active facets of metal cocatalyst and exploring how they modulate the reactivity is crucial for the further development of advanced photocatalysts. In this work, through controlled hybridization of two-dimensional (2D) TiO₂ nanosheets with well-designed Pd nanocube (Pd NC) with exposed {100} facet and Pd nano-octahedron (NO) with exposed {111} facet, we unravel the distinct crystal facet effect of Pd cocatalyst in promoting the selective hydrogenation of nitroarenes to amines of TiO₂ photocatalyst. The activity tests show that the Pd NO with {111} facet is a more efficient cocatalyst than the Pd NC with exposed {100} facet. The prepared TiO₂-Pd NO composite displays a 900% enhancement of photocatalytic hydrogenation rate in comparison with bare TiO₂, while the TiO₂-Pd NC sample only shows a 200% photoactivity enhancement. Microscopic mechanism study discloses that the distinctive photoactivity improvement of Pd NO is ascribed to the concurrent modulation of the Schottky barrier height and enrichment of surface reactants: (i) the Pd NO with a lower Fermi level could result in steeper band bending of TiO₂ (i.e., higher Schottky barrier) than the Pd NC, which is more efficient in boosting interfacial separation and inhibiting the recombination of photoexcited charge pairs; and (ii) the {111} facet of Pd has higher nitroarenes adsorption ability and especially stronger hydrogen enrichment capability, thus accelerating the surface hydrogenation process and contributing to a higher reaction rate. This work emphasizes the rational facet control of cocatalysts for enhancing the photocatalytic hydrogenation performance.

Photocatalytic degradation of cephalexin by g-C3N4/Zn doped Fe3O4 under visible light

In this work, we reported synthesis of a novel magnetically separable g-C₃N₄/Zn doped Fe₃O₄ composite (g-CN/ZnFe) by a simple polyol thermal method. The characteristics of the as-prepared composite was checked by XRD, SEM, TEM, XPS, PL technologies. The optimized weight ratio of g-C₃N₄ and Zn doped Fe₃O₄ was investigated. In addition, the photocatalytic activities of the composite products were checked by degradation of Cephalexin (CEX) under visible light. The results showed that g-CN/ZnFe composite with an added 20% g-C₃N₄ exhibited the highest photocatalytic activity for cephalexin under visible light irradiation. The improved photocatalytic activity of 20% g-CN/ZnFe can be ascribed to the low combination rate of photoinduced electron/hole pairs. Especially, g-CN/ZnFe can be recovered easily by using an external magnetic field and has the high stability after six runs. These properties of the g-CN/ZnFe as-prepared composite could be a promising photocatalyst for the degradation of pharmaceutical contaminants.

Silver nanoparticles decorated g-C3N4: An efficient SERS substrate for monitoring catalytic reduction and selective Hg2+ions detection

Graphitic carbon nitride supported Ag NPs(AgNPs@g-C₃N₄) were synthesized by an in-situ chemical reduction using a green reducing agent, tannic acid. They were characterized by UV-Vis, FTIR, XPS, XRD, FESEM, EDAX and HRTEM. They were very much SERS sensitive, and capable of detecting methylene blue and 4-aminothiophenol at 1 × 10^-12 M and 1 × 10^-10 M, respectively with the corresponding SERS enhancement factor of 1.4 × 10⁸ and 4.7 × 10⁷. Apart from its high SERS sensitivity, it exhibited high catalytic activity for the reduction of MB with NaBH₄. So, their SERS activity and catalytic activity were combined successfully to monitor catalytic reduction of MB by SERS technique. Further, the SERS activity towards MB was also employed for the detection/quantification of free Hg²⁺ ions in aqueous solution. The SERS intensity of MB drastically decreased in the presence of Hg²⁺ ions, and hence it provides novel route to detect and quantify the latter. Presence of Ca²⁺, Mg²⁺, Cu²⁺ and Cd²⁺ions showed zero interference for it. So, this study proves that Ag NPs@g-C₃N₄ as a unique substrate for multiple SERS applications.

Fabrication of Ag3PO4/TiO2@molecular sieve (MS) ternary composites with remarkably enhanced visible light-responded photocatalytic activity and mechanism insight

In this study, Ag₃PO₄/TiO₂@molecular sieve (MS) ternary composites were fabricated via in-situ deposition and hydrothermal growth method for photocatalytic degradation of formaldehyde and sodium isobutyl xanthate (SIBX) under visible light irradiation. XRD, PL, UV-vis, UPS, SEM-EDS and XPS techniques were adopted to characterize the composite. The results show that the MS material was indexed as zeolite P and Ag₃PO₄-TiO₂ hybrid structure could improve the absorption of visible light and greatly inhibit the recombination of photogenerated charge carriers by introducing 3 times TiO₂. After evaluating the photocatalytic activity and kinetics model, it is found that photocatalytic activity is consistent with the apparent first-order kinetic model. The Ag₃PO₄/TiO₂-3@MS ternary composite under visible light irradiation appears the highest removal rate with 97.9% of formaldehyde and 96.7% of SIBX, respectively. Furthermore, the reusability of the photocatalyst was investigated by successive reuse. After five reuses, the removal rates reached 97.3% and 94.6% within 105 min for formaldehyde and SIBX, respectively. At last, the proposed mechanism of the photocatalytic reaction and the degradation routes of formaldehyde and SIBX were systematically discussed.

Synthesis and fabrication of g-C3N4-based materials and their application in elimination of pollutants

With the fast development of industrial and human activity, large amounts of persistent organic pollutants, heavy metal ions and radionuclides are released into the natural environment, which results in environmental pollution. The efficient elimination of the natural environment is crucial for the protection of environment to against the pollutants' toxicity to human beings and living organisms. Graphitic carbon nitride (g-C₃N₄) has drawn multidisciplinary attention especially in environmental pollutants' cleanup due to its special physicochemical properties. In this review, we summarized the recent works about the synthesis of g-C₃N₄, element-doping, structure modification of g-C₃N₄ and g-C₃N₄-based materials, and their application in the sorption, photocatalytic degradation and reduction-solidification of persistent organic pollutants and heavy metal ions. The interaction mechanisms were discussed from advanced spectroscopic analysis and computational approaches at molecular level. The challenges and future perspectives of g-C₃N₄-based materials' application in environmental pollution management are presented in the end. This review highlights the real applications of g-C₃N₄-based materials as adsorbents or photocatalysts in the adsorption-reduction-solidification of metal ions or photocatalytic degradation of organic pollutants. The contents are helpful for the undergraduate students to understand the recent works in the elimination of organic/inorganic pollutants in their pollution management.

Highly efficient degradation of iohexol on a heterostructured graphene-analogue boron nitride coupled Bi2MoO6 photocatalyst under simulated sunlight

Iohexol (IOH), as a typical iodinated X-ray contrast media (ICMs) with potential threat to human health, is difficult to be removed with the conventional wastewater treatment methods. In this work, new boron nitride coupled Bi₂MoO₆ layered microspheres (BN/Bi₂MoO₆) composites were applied to remove IOH from water via photocatalytic degradation. The degradation constant k_app of IOH over 3.5 wt% BN/Bi₂MoO₆ was 0.016 min^-1, which was 3.2 times that of Bi₂MoO₆ (0.005 min^-1). The degradation rate of IOH on 3.5 wt% BN/Bi₂MoO₆ reached 92% in 150 min. The enhanced photocatalytic activity of BN/Bi₂MoO₆ can be attributed to the heterojunction between BN and Bi₂MoO₆. The matched type-I band alignment heterojunction of two semiconductors prominently improved the charge separation. Based on the trapping experiments, holes and superoxide radicals were proved to be the main active species for photocatalytic IOH degradation. Besides, the degradation products of IOH were analyzed by LC-HRMS and the possible degradation mechanism of IOH was also proposed in this work.

Ag-Modified g-C3N4 Prepared by a One-Step Calcination Method for Enhanced Catalytic Efficiency and Stability

Ag-decorated g-C₃N₄ (denoted as Ag/CN-x) was prepared by a one-step calcination method, and the influences of calcination time on structure, morphology, surface composition, photocatalytic performance, and catalytic reduction activity of the prepared Ag/CN-x samples were investigated. The tests showed that the Ag/CN-8 prepared through by calcination for 8 h exhibited the best photocatalytic degradation efficiency of methyl orange (98.7% within 2 h) and the best catalytic reduction property of 4-nitrophenol (100% within 70 s). Meanwhile, these Ag/CN-x samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET), X-ray photoelectron spectroscopy (XPS), UV-vis diffuse reflectance spectra (DRS), photoluminescence (PL), photocurrent response, and electrochemical impedance spectroscopy (EIS) Nyquist plots. It was found that the Ag/CN-8 prepared through calcination for 8 h had a higher specific surface area, higher dispersibility of silver nanoparticles (Ag NPs), the widest range of visible light response, and the lowest photogenerated electron-hole recombination rate. The results of the trapping experiments indicated that a superoxide radical plays a major role. Moreover, a possible mechanism of photocatalytic degradation in methyl orange and catalytic reduction 4-nitrophenol was proposed.

Pd on poly(1-vinylimidazole) decorated magnetic S-doped grafitic carbon nitride: an efficient catalyst for catalytic reduction of organic dyes

A novel magnetic catalyst, (SGCN/Fe₃O₄/PVIs/Pd) was synthesized by growing of poly(1-vinylimidazole) on the surface of ionic liquid decorated magnetic S-doped graphitic carbon nitride, followed by stabilization of palladium nanoparticles. Catalytic activity of the prepared heterogeneous catalyst was explored for the catalytic reduction of hazardous dyes, methyl orange and Rhodamine B, in the presence of NaBH₄. Besides, the effects of the reaction variables on the catalytic activity were investigated in detail. The kinetics study established that dye reduction was the first order reaction and the apparent activation energy was calculated to be 72.63 kJ/mol and 68.35 kJ/mol¹ for methyl orange and Rhodamine B dyes, respectively. Moreover, ΔS^# and ΔH^# values for methyl orange were found to be − 33.67 J/mol K and 68.39 kJ/mol respectively. These values for Rhodamine B were − 45.62 J/mol K and 65.92 kJ/mol. The recycling test verified that the catalyst possessed good stability and reusability, thereby making it a good candidate for the catalytic purposes. Furthermore, a possible catalytic mechanism for dye catalytic reduction over SGCN/Fe₃O₄/PVIs/Pd was proposed.

An innovative magnetic Ni0.1Co0.9Fe2O4/g-C3N4 nano-micro-spherical heterojunction composite photocatalyst with an extraordinarily prominent visible-light-irradiation degradation performance toward organic pollutants

Environmental pollution removal is attracting more attention these days because of increasing environmental problems. The use of photodegradation catalysts is a promising avenue in resolving environmental issues and therefore high-performance photocatalysts are urgently needed. Herein, we solvothermally synthesized a micro-spherical g-C3N4 photocatalyst and a nanospherical Ni0.1Co0.9Fe2O4 photocatalyst, and then innovatively employed small amounts of Ni0.1Co0.9Fe2O4 nanospheres coupled with g-C3N4 microspheres to fabricate a novel magnetic Ni0.1Co0.9Fe2O4/g-C3N4 nano-micro-spherical heterojunction photocatalyst through post co-calcination. Various techniques, including scanning electron microscopy, transmission electron microscopy, X-ray diffraction, Fourier transform-infrared spectroscopy and UV-vis diffuse reflectance spectroscopy, were employed to analyze the as-synthesized hybrid photocatalyst. The resultant photocatalyst exhibits a record high photocatalytic degradation activity against methylene blue under visible-light irradiation with a 100% degradation rate within only 10 min, corresponding to an extraordinarily prominent degradation reaction rate constant k value of up to 0.586 min-1. Our strategy opens a new effective way for fabricating high-performance photocatalysts and our novel Ni0.1Co0.9Fe2O4/g-C3N4 heterojunction photocatalyst is of great potential for application in environmental treatments.

Hollow porous prismatic graphitic carbon nitride with nitrogen vacancies and oxygen doping: a high-performance visible light-driven catalyst for nitrogen fixation

Hollow porous prismatic graphitic carbon nitride with nitrogen vacancies and oxygen doping was successfully constructed using dicyandiamidine as the only raw material via a facile two-step strategy of a low-temperature hydrothermal method followed by a subsequent calcination process. The as-obtained graphitic carbon nitride showed a hollow prismatic morphology with loose spongy-like walls, a hierarchical pore structure, and a specific surface area of 220.16 m2 g-1. Such graphitic carbon nitride exhibited an ultrahigh nitrogen fixation rate of 118.8 mg L-1 h-1 gcat-1 under visible light irradiation and showed excellent stability during the reactions. A possible mechanism for photocatalytic nitrogen fixation on the catalyst was proposed as follows: under visible-light irradiation, graphitic carbon nitride with nitrogen vacancies and oxygen doping underwent charge separation to generate electron-hole pairs, and then the photogenerated electrons on the conduction band were quickly transferred to the nitrogen vacancy induced mid-gap state; consequently, the trapped electrons reacted with the activated nitrogen on the nitrogen vacancies to produce ammonia. The significant enhancement in the photocatalytic nitrogen fixation performance of graphitic carbon nitride can be attributed to its unique hollow prismatic morphology with a loose porous structure, fully exposed active sites of nitrogen vacancies, more negative conduction band, suitable visible-light response and the efficient separation of photogenerated electron-hole pairs.

Fabrication of nanohybrids assisted by protein-based materials for catalytic applications

Protein units and architectures were applied as supports in the synthesis of metal and metal oxide nanoparticles for environmentally benign catalytic applications.

Ultralow-temperature synthesis of small Ag-doped carbon nitride for nitrogen photofixation

A low-temperature-reduction–deposition method is used to prepare homogeneously dispersed Ag⁰/g-C₃N₄ for efficient N₂ photofixation.