Immobilizing water-soluble graphene quantum dots with gold nanoparticles for a low potential electrochemiluminescence immunosensor

Highly Active Coreactant-Capped and Water-Stable 3D@2D Core-Shell Perovskite Quantum Dots as a Novel and Strong Self-Enhanced Electrochemiluminescence Probe

Self-enhanced electrochemiluminescence (ECL) probes have attracted more and more attention in analytical chemistry for their significant simplification of the ECL sensing operation while improving the ECL sensing sensitivity. However, the development and applications of self-enhanced ECL probes are still in their infancy and mainly suffer from the requirement of a complicated synthesis strategy and relatively low self-enhanced ECL activity. In this work, we took advantage of the recently emerged perovskite quantum dots (PQDs) with high optical quantum yields and easy surface engineering to develop a new type of PQD-based self-enhanced ECL system. The long alkyl chain (C18) diethanolamine (i.e., N-octadecyldiethanolamine (ODA)) with high ECL coreactant activity was selected as a capping ligand to synthesize an ODA-capped PQD self-enhanced ECL probe. The preparation of the coreactant-capped PQDs is as simple as for the ordinary oleylamine (OAm)-capped PQDs, and the obtained ODA-capped PQDs exhibit very strong self-enhanced ECL activity, 82.5 times higher than that of traditional OAm-capped PQDs. Furthermore, the prepared ODA-PQDs have a unique nanostructure (ODA-CsPbBr3@CsPb2Br5), with the highly emissive 3D CsPbBr3 PQD as the core and the water-stable 2D CsPb2Br5 as the shell, which allows ODA-PQDs to be very stable in aqueous media. It is envisioned that the prepared ODA-3D@2D PQDs with the easy preparation method, strong self-enhanced ECL, and excellent water stability have promising applications in ECL sensing.

Luminophore-Surface-Engineering-Enabled Low-Triggering-Potential and Coreactant-Free Electrochemiluminescence for Protein Determination

Coreactant-free electrochemiluminescence (ECL) is promising for removing the exogenous effects of coreactant and simplify the operation procedures and setups of commercialized ECL bioassays. Herein, an electrosterically involved strategy for achieving a low-triggering-potential (+0.21 V vs Ag/AgCl) and coreactant-free ECL from dual-stabilizer-capped CdTe nanocrystals (NCs) is proposed with mercaptopropionic acid (MPA) and hexametaphosphate (HMP) as the capping agents of luminophores. Upon employing the CdTe NCs as the ECL tag for the immunoassay, all the tags in the bioconjugates of the CdTe NCs and the secondary antibody (Ab₂|CdTe) as well as in the final achieved sandwich-type immunocomplexes can exhibit efficient coreactant-free ECL with an electrosterically involved triggering potential nature. The bioconjugates of Ab₂|CdTe with Ab₂ no more than 30 kDa, such as the thyroid stimulating hormone (30 kDa) and the recombinant pro-gastrin releasing peptide (ProGRP, 14 kDa), merely exhibit coreactant-free ECL around +0.24 V, while bioconjugates of Ab₂|CdTe with an Ab₂ beyond 30 kDa only give off coreactant-free ECL around +0.82 V. Due to the further enhanced electrosteric effect in sandwich-type immunocomplexes, only the ECL immunosensor with ProGRP as the target can give off coreactant-free ECL around +0.24 V. The electrosterically involved and coreactant-free ECL of CdTe NCs is consequently utilized to sensitively and selectively determine the molecular protein ProGRP, which demonstrates a wide linearity range from 0.1 to 2000 pg/mL and a low limit of detection at 0.05 pg/mL (S/N = 3). This low-triggering-potential and coreactant-free combined ECL platform indicates that engineering the surface of CdTe NCs with a protein can improve the performance of ECL tags in a protein-weight-involved electrosterical way.

Nanomaterial Gas Sensors for Biosensing Applications: A Review

BACKGROUND

Nanomaterial is one of the most used materials for various gas sensing applications to detect toxic gases, human breath, and other specific gas sensing. One of the most important applications of nanomaterial based gas sensors is biosensing applications. In this review article, the gas sensors for biosensing are discussed on the basis of crystalline structure and different categories of nanomaterial.

METHODS

In this paper, firstly, rigorous efforts have been made to find out research questions by going through a structured and systematic survey of available peer reviewed high quality articles in this field. The papers related to nanomaterial based biosensors are then reviewed qualitatively to provide substantive findings from the recent developments in this field.

RESULTS

In this mini-review article, firstly, classifications of nanomaterial gas sensors have been presented on the basis of the crystalline structure of nanomaterial and different types of nanomaterial available for biosensing applications. Further, the gas sensors based on nanomaterial for biosensing applications are collected and reviewed in terms of their performance parameters such as sensing material used, target gas component, detection ranges (ppm-ppb), response time, operating temperature and method of detection, etc. The different nanomaterials possess slightly different sensing and morphological properties due to their structure; therefore, it can be said that a nanomaterial must be selected carefully for a particular application. The 1D nanomaterials show the best selectivity and sensitivity for gases available in low concentration ranges due to their miniaturised structure compared to 2D and 3D nanomaterials. However, these 2D and 3D nanomaterials also so good sensing properties compared to bulk semiconductor materials. The polymer and nanocomposites which are also discussed in this patent article have opened the door for future research and have great potential for new generation gas sensors for detecting biomolecules.

CONCLUSION

These nanomaterials extend great properties towards sensing the application of different gases for a lower concentration of particular gas particles. Nano polymer and nanocomposites have great potential to be used as gas sensors for the detection of biomolecules.

Quantum dots for electrochemiluminescence bioanalysis - A review

Electrochemiluminescence (ECL) bioanalysis has become increasingly important in various fields from bioanalysis to clinical diagnosis due to its outstanding merits, including low background signal, high sensitivity, and simple instrumentation. Quantum dots (QDs) are a significant theme in ECL bioanalysis since their excellent optical, electrochemical properties, and ease of functionalization endow them with versatile roles and new mechanisms of signal transduction in ECL. Herein, this review details recent advances of QDs-based ECL bioanalysis by using QDs as ECL emitters, coreactants, or ECL resonance energy transfer donors/acceptors, mainly focused on their optical and electrochemical properties and ECL reaction mechanism. In the end, we will discuss the current limitations and future developments in QDs ECL bioanalysis to address the requirement about selectivity, sensitivity, toxicity, and emerging applications.

Properties and Applications of Graphene and Its Derivatives in Biosensors for Cancer Detection: A Comprehensive Review

Cancer is one of the deadliest diseases worldwide, and there is a critical need for diagnostic platforms for applications in early cancer detection. The diagnosis of cancer can be made by identifying abnormal cell characteristics such as functional changes, a number of vital proteins in the body, abnormal genetic mutations and structural changes, and so on. Identifying biomarker candidates such as DNA, RNA, mRNA, aptamers, metabolomic biomolecules, enzymes, and proteins is one of the most important challenges. In order to eliminate such challenges, emerging biomarkers can be identified by designing a suitable biosensor. One of the most powerful technologies in development is biosensor technology based on nanostructures. Recently, graphene and its derivatives have been used for diverse diagnostic and therapeutic approaches. Graphene-based biosensors have exhibited significant performance with excellent sensitivity, selectivity, stability, and a wide detection range. In this review, the principle of technology, advances, and challenges in graphene-based biosensors such as field-effect transistors (FET), fluorescence sensors, SPR biosensors, and electrochemical biosensors to detect different cancer cells is systematically discussed. Additionally, we provide an outlook on the properties, applications, and challenges of graphene and its derivatives, such as Graphene Oxide (GO), Reduced Graphene Oxide (RGO), and Graphene Quantum Dots (GQDs), in early cancer detection by nanobiosensors.

Facile synthesis of nitrogen-doped graphene quantum dots as nanocarbon emitters for sensitive detection of catechol

Development of nanomaterial-based electrochemiluminescence (ECL) emitters is highly desirable for the fabrication and wide applications of ECL sensors. Herein, nitrogen-doped graphene quantum dots (NGQDs) were easily synthesized as nanocarbon emitters with anodic ECL for sensitive ECL determination of catechol (CC). Facile synthesis of NGQDs was easily achieved using molecular fusion of a carbon precursor in a one-step hydrothermal process. The synthesis has advantages of simple and convenient operation and high yield. The as-prepared NGQDs have uniform size, good crystallinity, single-layered graphene structure, and excitation-independent fluorescence. In the presence of hydrogen peroxide (H₂O₂), NGQDs exhibit high anodic ECL owing to the presence of functional hydrazide groups. As CC could significantly reduce the ECL intensity of NGQDs, sensitive determination of CC was realized with a linear range from 100 nM to 10 μM and 10 μM to 60 μM with a low limit of detection (LOD, 42 nM). The determination of CC in environmental water was also achieved with high reliability.

Nitrogen-doped graphene quantum dots are easily synthesized and can be used as nanocarbon emitters for sensitive electrochemiluminescence detection of catechol.

Electrochemistry/Photoelectrochemistry-Based Immunosensing and Aptasensing of Carcinoembryonic Antigen

Recently, electrochemistry- and photoelectrochemistry-based biosensors have been regarded as powerful tools for trace monitoring of carcinoembryonic antigen (CEA) due to the fact of their intrinsic advantages (e.g., high sensitivity, excellent selectivity, small background, and low cost), which play an important role in early cancer screening and diagnosis and benefit people's increasing demands for medical and health services. Thus, this mini-review will introduce the current trends in electrochemical and photoelectrochemical biosensors for CEA assay and classify them into two main categories according to the interactions between target and biorecognition elements: immunosensors and aptasensors. Some recent illustrative examples are summarized for interested readers, accompanied by simple descriptions of the related signaling strategies, advanced materials, and detection modes. Finally, the development prospects and challenges of future electrochemical and photoelectrochemical biosensors are considered.

Carbon Nanotubes, Graphene, and Carbon Dots as Electrochemical Biosensing Composites

Carbon nanomaterials (CNMs) have been extensively used as electrochemical sensing composites due to their interesting chemical, electronic, and mechanical properties giving rise to increased performance. Due to these materials' unknown long-term ecological fate, care must be given to make their use tractable. In this review, the design and use of carbon nanotubes (CNTs), graphene, and carbon dots (CDs) as electrochemical sensing electrocatalysts applied to the working electrode surface are surveyed for various biosensing applications. Graphene and CDs are readily biodegradable as compared to CNTs. Design elements for CNTs that carry over to graphene and CDs include Coulombic attraction of components and using O or N atoms that serve as tethering points for attaching electrocatalytically active nanoparticles (NPs) and/or other additives.

One-Step Preparation of Nitrogen-Doped Graphene Quantum Dots With Anodic Electrochemiluminescence for Sensitive Detection of Hydrogen Peroxide and Glucose

Simple and efficient synthesis of graphene quantum dots (GQDs) with anodic electrochemiluminescence (ECL) remains a great challenge. Herein, we present an anodic ECL-sensing platform based on nitrogen-doped GQDs (N-GQDs), which enables sensitive detection of hydrogen peroxide (H₂O₂) and glucose. N-GQDs are easily prepared using one-step molecular fusion between carbon precursor and a dopant in an alkaline hydrothermal process. The synthesis is simple, green, and has high production yield. The as-prepared N-GQDs exhibit a single graphene-layered structure, uniform size, and good crystalline. In the presence of H₂O₂, N-GQDs possess high anodic ECL activity owing to the functional hydrazide groups. With N-GQDs being ECL probes, sensitive detection of H₂O₂ in the range of 0.3–100.0 μM with a limit of detection or LOD of 63 nM is achieved. As the oxidation of glucose catalyzed by glucose oxidase (GOx) produces H₂O₂, sensitive detection of glucose is also realized in the range of 0.7–90.0 μM (LOD of 96 nM).

Nanobiosensing with graphene and carbon quantum dots: Recent advances

Graphene and carbon quantum dots (GQDs and CQDs) are relatively new nanomaterials that have demonstrated impact in multiple different fields thanks to their unique quantum properties and excellent biocompatibility. Biosensing, analyte detection and monitoring wherein a key feature is coupled molecular recognition and signal transduction, is one such field that is being greatly advanced by the use of GQDs and CQDs. In this review, recent progress on the development of biotransducers and biosensors enabled by the creative use of GQDs and CQDs is reviewed, with special emphasis on how these materials specifically interface with biomolecules to improve overall analyte detection. This review also introduces nano-enabled biotransducers and different biosensing configurations and strategies, as well as highlights key properties of GQDs and CQDs that are pertinent to functional biotransducer design. Following relevant introductory material, the literature is surveyed with emphasis on work performed over the last 5 years. General comments and suggestions to advance the direction and potential of the field are included throughout the review. The strategic purpose is to inspire and guide future investigations into biosensor design for quality and safety, as well as serve as a primer for developing GQD- and CQD-based biosensors.

Investigating the Properties of Cetyltrimethylammonium Bromide/Hydroxylated Graphene Quantum Dots Thin Film for Potential Optical Detection of Heavy Metal Ions

The modification of graphene quantum dots (GQDs) may drastically enhance their properties, therefore resulting in various related applications. This paper reported the preparation of novel cetyltrimethylammonium bromide/hydroxylated graphene quantum dots (CTAB/HGQDs) thin film using the spin coating technique. The properties of the thin film were then investigated and studied. The functional groups existing in CTAB/HGQDs thin film were confirmed by the Fourier transform infrared (FTIR) spectroscopy, while the atomic force microscope (AFM) displayed a homogenous surface of the thin film with an increase in surface roughness upon modification. Optical characterizations using UV-Vis absorption spectroscopy revealed a high absorption with an optical band gap of 4.162 eV. Additionally, the photoluminescence (PL) spectra illustrated the maximum emission peak of CTAB/HGQDs thin film at a wavelength of 444 nm. The sensing properties of the as-prepared CTAB/HGQDs thin film were studied using a surface plasmon resonance technique towards the detection of several heavy metal ions (HMIs) (Zn2+, Ni2+, and Fe3+). This technique generated significant results and showed that CTAB/HGQDs thin film has great potential for HMIs detection.

Applications of Graphene Quantum Dots in Biomedical Sensors

Due to the proliferative cancer rates, cardiovascular diseases, neurodegenerative disorders, autoimmune diseases and a plethora of infections across the globe, it is essential to introduce strategies that can rapidly and specifically detect the ultralow concentrations of relevant biomarkers, pathogens, toxins and pharmaceuticals in biological matrices. Considering these pathophysiologies, various research works have become necessary to fabricate biosensors for their early diagnosis and treatment, using nanomaterials like quantum dots (QDs). These nanomaterials effectively ameliorate the sensor performance with respect to their reproducibility, selectivity as well as sensitivity. In particular, graphene quantum dots (GQDs), which are ideally graphene fragments of nanometer size, constitute discrete features such as acting as attractive fluorophores and excellent electro-catalysts owing to their photo-stability, water-solubility, biocompatibility, non-toxicity and lucrativeness that make them favorable candidates for a wide range of novel biomedical applications. Herein, we reviewed about 300 biomedical studies reported over the last five years which entail the state of art as well as some pioneering ideas with respect to the prominent role of GQDs, especially in the development of optical, electrochemical and photoelectrochemical biosensors. Additionally, we outline the ideal properties of GQDs, their eclectic methods of synthesis, and the general principle behind several biosensing techniques.

A review on exfoliation, characterization, environmental and energy applications of graphene and graphene-based composites

Because of an atom-thick two-dimensional structure with sp² hybridization, large specific area, high thermal conductivity, superior electron mobility, and chemical stability, graphene (GN) has developed substantial interest among researchers, exponentially accelerating GN based research. GN and its derivatives are the potentially attractive materials to develop composites for energy and environmental applications. This review covered a general overview on physical and chemical properties of GN and based composite materials, briefly summarizing exfoliation methodologies and characterization techniques in the first section. The environmental applications of GN and GN composites in detection of gases, bacteria as well as in the removal of organic and inorganic pollutants were comprehensively addressed in the second section. Third section focused on recent progress associated with the applications of GN and its composites in solar energy conversion, electrochemical energy devices, storage and production of hydrogen. Finally, conclusive remarks emphasizing unresolved problems and major future challenges were covered in the last section. In addition, the prospects and further development of GN and GN composites in energy, environment and bioscience were discussed.

Promising Mercaptobenzoic Acid-Bridged Charge Transfer for Electrochemiluminescence from CuInS2@ZnS Nanocrystals via Internal Cu+/Cu2+ Couple Cycling

Screening novel electrochemiluminescence (ECL) systems with less inherent interference is strongly anticipated for ECL evolution. Herein, near-infrared ECL (∼730 nm) with an ultralow triggering potential of 0.45 V (vs Ag/AgCl) is achieved under physiological conditions with 4-mercaptobenzoic acid (MBA) and citrate capped CuInS₂@ZnS (CIS@ZnS) nanocrystals (NCs), which is promising for less autofluorescence and electrochemical interference. Cu⁺ species within the CIS@ZnS NCs can be electrochemically oxidized at 0.45 V to form internal Cu²⁺ defects, while the capping agent MBA can bridge a direct charge transfer between the oxidized NCs and the traditional coreactant tripropylamine (TPrA) for weak ECL at 0.45 V. When hydrazine hydrate is adopted as coreactant, CIS@ZnS NCs/hydrazine hydrate exhibits 8k-fold enhanced oxidative-reduction ECL via the internal Cu⁺/Cu²⁺ couple cycling at 0.45 V in comparison to CIS@ZnS NCs/TPrA. This work opens a way to enhance the radiative charge transfer of NCs.

Au-Luminol-decorated porous carbon nanospheres for the electrochemiluminescence biosensing of MUC1

Electrochemiluminescence (ECL) nanomaterials are usually deposited compactly on the surface of electrodes, which may cause poor mass transfer of reactants, thereby resulting in low ECL efficiency. In this work, we developed a novel kind of luminescent material denoted as C-Au-luminol nanospheres (C-Au-Lum NSs) by high dispersion of luminophores on porous carbon nanospheres (PCNSs). C-Au-Lum NSs were facilely prepared by the in situ reduction of chloroauric acid with the luminescent reagent luminol (Lum) on the nano-pores of PCNSs. Plenty of luminescent Au-Lum NPs were dispersedly concentrated inside the numerous pores and hollow interiors of PCNSs, effectively increasing the mass transfer of reagents and accelerating the electron transport inside the porous nanospheres. This greatly improved the availability of luminophores and endowed C-Au-Lum NSs with excellent ECL emission. After further integrating with enzymatic circulation and strand displacement, an ultrasensitive ECL biosensor was achieved for the ultrasensitive detection of an important tumor biomarker, mucin1. The logarithmically linear range from 0.1 pg mL-1 to 1 ng mL-1 with the detection limit of 47.6 fg mL-1 (S/N = 3) was achieved, demonstrating the superior performance of C-Au-Lum NSs. This work would provide new ideas for the construction of high-performance ECL sensing platforms for diverse applications.

Recent Advances in Aggregation-Induced Electrochemiluminescence

The emergence of the rising alliance between aggregation-induced emission (AIE) and electrochemiluminescence (ECL) is defined as aggregation-induced electrochemiluminescence (AIECL). The booming science of AIE has proved to be not only distinguished in luminescent materials but could also inject new possibility into ECL analysis. Especially in the aqueous phase and solid state for hydrophobic materials, AIE helps ECL circumvent the dilemma between substantial emission intensity and biocompatible media. The wide range of analytes makes ECL an overwhelmingly interesting analytical technique. Therefore, AIECL has gained potential in clinical diagnostics, environmental assays, and biomarker detections. This review will focus on introduction of the novel concept of AIECL, current applied luminophores, and related applications developed in recent years.

Sensitivity enhancement of cloth-based closed bipolar electrochemiluminescence glucose sensor via electrode decoration with chitosan/multi-walled carbon nanotubes/graphene quantum dots-gold nanoparticles

In this work, a novel facile closed bipolar electrochemiluminescence (C-BP-ECL) sensor has been developed for highly sensitive detection of glucose based on the integration of chitosan (CS), poly(diallyldimethylammonium chloride)-functioned multi-walled carbon nanotubes (PDDA-MWCNTs) and graphene quantum dots-gold nanoparticles (GQDs-AuNPs) on the wax/carbon ink-screen-printed cloth-based device. When CS, PDDA-MWCNTs and GQDs-AuNPs are successively decorated onto the cathode of closed bipolar electrode (C-BPE), the C-BPE anode can emit much stronger C-BP-ECL signals. Moreover, the cathodic decoration of the C-BPE can generate a stronger ECL signal in comparison with its anodic decoration. Under optimized conditions, glucose can be detected in the range of 0.1-5000 μM, and the limit of detection is estimated to be 64 nM, which is about three orders of magnitude lower than that in case of the bare C-BPE cathode (31 μM). It has been shown that the proposed sensor has high detection sensitivity, wide dynamic range, and as well acceptable reproducibility, selectivity and stability. Finally, the applicability and validity of the C-BP-ECL sensor are demonstrated for the detection of glucose in human serum samples. We believe that this novel highly-sensitive sensor will have potential applications in various areas such as clinical diagnosis, food analysis and environmental monitoring.

Electrogenerated chemiluminescence of black phosphorus nanosheets and its application in the detection of H2O2

Black phosphorus nanosheets (BPNS) were synthesized from BP crystals through liquid exfoliation coupled with ultrasonic methods under aqueous conditions.

Metal-Organic Framework-Assisted Construction of TiO2/Co3O4 Highly Ordered Necklace-like Heterostructures for Enhanced Ethanol Vapor Sensing Performance

In this work, we report a metal-organic framework (MOF)-assisted strategy to synthesize necklace-like TiO₂/Co₃O₄ nanofibers with highly ordered heterostructures via a facile approach including electrospinning and subsequent calcination. Polycrystalline TiO₂ nanofibers and Co₃O₄ nanocages are consummately interconnected to form a highly ordered heterogeneous nanostructure, which can be of benefit for precisely accommodating the interface resistance of the p-n heterojunctions and the future realization of improved material performance. The ethanol-gas-sensing investigation showed that TiO₂/Co₃O₄ nanofiber sensors exhibited a strong ethanol response ( R_air/ R_gas -1 = 16.7 @ 150 ppm) and a low operating temperature of 150 °C. The sensing enhancement mechanism of the TiO₂/Co₃O₄ nanofibers is related to the formation of heterojunctions at interfaces and the high catalytic activity of MOF-derived Co₃O₄. Furthermore, this versatile method is a promising approach to constructing ordered heterostructures and extending the MOF-based heterogeneous materials toward wide applications.

Donor-Acceptor Conjugated Polymer Dots for Tunable Electrochemiluminescence Activated by Aggregation-Induced Emission-Active Moieties

Low-potential electrochemiluminescence (ECL) luminophores with excellent ECL behavior have attracted considerable interest in biological analysis. Herein, we describe the synthesis of two aggregation-induced emission (AIE)-active conjugated polymers with a donor-acceptor (D-A) system via a Suzuki coupling polymerization reaction. The intramolecular D-A pairs enhanced their luminescence intensity in aggregate states, which was beneficial for preparation of conjugated polymer dots (Pdots) as ECL materials. The ECL emission of the P-2 Pdots showed obvious red shift from 578 to 598 nm after the fluorene moiety (P-1) was replaced with a stronger electron-donating carbazole moiety. The ECL property could be regulated with intramolecular charge transfer of the D-A moieties, which led to a sharp decline (553 mV) of ECL anodic potential. Furthermore, the ECL intensity significantly increased about 6 times because of the low lowest unoccupied molecular orbital level, which facilitated the electron injection into the conjugated polymer backbone. This work provides an effective strategy for developing AIE-active ECL materials with low potential and high ECL emission intensity via adjusting the D-A electronic structure.

Amplified electrochemiluminescence detection of CEA based on magnetic Fe3O4@Au nanoparticles-assembled Ru@SiO2 nanocomposites combined with multiple cycling amplification strategy

In this work, we designed a new strategy for ultrasensitive detection of CEA based on efficient electrochemiluminescence (ECL) quenching of Ru(bpy)₃²⁺-doped SiO₂ nanocomposite by ferrocene using target recycling amplification technique. A large number of Ru@SiO₂ ECL signal probe were firstly assembled on the novel magnetic core-shell Fe₃O₄@Au nanoparticles (NPs), then the ferrocene-labeled ECL quenching probe (Fc-probe) was linked to the magnetic NPs. Finally, numerous DNA1 sequences were produced by target CEA-triggered multiple recycling amplification and displaced the Fc-probe on the magnetic NPs, leading to significantly enhanced ECL signal for CEA detection. Because of the designed cascade signal amplification strategy, the newly developed method achieved a wide linear range of 10 fg/mL to 10 ng/mL with a low detection limit of  3.5 fg/mL. Furthermore, taking advantages of the magnetic Fe₃O₄@Au NPs for carring abundant signal probes, sensing target and ECL detection, the developed ECL strategy is convenient, rapid and displayed high sensitivity for CEA detection, which has great potential for analyzing the clinical samples in practical disease diagnosis applications.

CA 19-9 Pancreatic Tumor Marker Fluorescence Immunosensing Detection via Immobilized Carbon Quantum Dots Conjugated Gold Nanocomposite

The clinical detection of carbohydrate antigen 19-9 (CA 19-9), a tumor marker in biological samples, improves and facilitates the rapid screening and diagnosis of pancreatic cancer. A simple, low cost, fast, and green synthesis method to prepare a viable carbon quantum dots/gold (CQDs/Au) nanocomposite fluorescence immunosensing solution for the detection of CA 19-9 was reported. The present method is conducted by preparing glucose-derived CQDs using a microwave-assisted method. CQDs were employed as reducing and stabilizing agents for the preparation of a CQDs/Au nanocomposite. The immobilized anti-CA 19-9-labeled horseradish peroxidase enzyme (Ab-HRP) was anchored to the surface of a CQDs/Au nanocomposite by a peptide interaction between the carboxylic and amine active groups. The CA 19-9 antigen was trapped by another monoclonal antibody that was coated on the surface of microtiter wells. The formed sandwich capping antibody-antigen-antibody enzyme complex had tunable fluorescence properties that were detected under excitation and emission wavelengths of 420 and 530 nm. The increase in fluorescence intensities of the immunoassay sensing solution was proportional to the CA 19-9 antigen concentration in the linear range of 0.01-350 U mL-1 and had a lower detection limit of 0.007 U mL-1. The proposed CQDs/Au nanocomposite immunoassay method provides a promising tool for detecting CA 19-9 in human serum.

Promising Anodic Electrochemiluminescence of Nontoxic Core/Shell CuInS2/ZnS Nanocrystals in Aqueous Medium and Its Biosensing Potential

Copper indium sulfide (CuInS₂, CIS) nanocrystals (NCs) are a promising solution to the toxic issue of Cd- and Pb-based NCs. Herein, electrochemiluminescence (ECL) of CIS NCs in aqueous medium is investigated for the first time with l-glutathione and sodium citrate-stabilized water-soluble CIS/ZnS NCs as model. The CIS/ZnS NCs can be oxidized to hole-injected states via electrochemically injecting holes into valence band at 0.55 and 0.94 V (vs Ag/AgCl), respectively. The hole-injected state around 0.94 V can bring out efficient oxidative-reduction ECL with a similar color to Ru(bpy)₃²⁺ in the presence of tri- n-propylamine (TPrA) and enable CIS/ZnS NCs promising ECL tags with l-glutathione as linker for labeling. The ECL of CIS/ZnS NCs/TPrA can be utilized to determine vascular endothelial growth factor (VEGF) from 0.10 to 1000 pM with the limit of detection at 0.050 pM (S/N = 3). Although the hole-injected state around 0.55 V is generated ahead of oxidation of TPrA and fails to bring out coreactant ECL, annihilation ECL proves that both hole-injected states generated, at 0.55 and 0.94 V, can be involved in electrochemical redox-induced radiative charge transfer by directly stepping CIS/ZnS NCs from electron-injecting potential to hole-injecting potential. CIS/ZnS NCs are promising nontoxic electrochemiluminophores with lowered ECL triggering potential around 0.55 V for less electrochemical interference upon the development of coreactant.

Recent progress in two-dimensional inorganic quantum dots

This review critically summarizes recent progress in the categories, synthetic routes, properties, functionalization and applications of 2D materials-based quantum dots (QDs).

Sensitive detection of enrofloxacin using an electrochemiluminescence immunosensor based on gold-functionalized C60 and Au@BSA nanoflowers

A novel competitive electrochemiluminescence (ECL) immunosensor based on CdSe quantum dots was developed for the detection of enrofloxacin (Enro).

An in situ electron donor consumption strategy for photoelectrochemical biosensing of proteins based on ternary Bi2S3/Ag2S/TiO2 NT arrays

An ascorbic acid oxidase–ascorbic acid bioevent-based electron donor consumption mode is introduced into the PEC bioassay for the first time.

Carbon Nanomaterial Based Biosensors for Non-Invasive Detection of Cancer and Disease Biomarkers for Clinical Diagnosis

The early diagnosis of diseases, e.g., Parkinson's and Alzheimer's disease, diabetes, and various types of cancer, and monitoring the response of patients to the therapy plays a critical role in clinical treatment; therefore, there is an intensive research for the determination of many clinical analytes. In order to achieve point-of-care sensing in clinical practice, sensitive, selective, cost-effective, simple, reliable, and rapid analytical methods are required. Biosensors have become essential tools in biomarker sensing, in which electrode material and architecture play critical roles in achieving sensitive and stable detection. Carbon nanomaterials in the form of particle/dots, tube/wires, and sheets have recently become indispensable elements of biosensor platforms due to their excellent mechanical, electronic, and optical properties. This review summarizes developments in this lucrative field by presenting major biosensor types and variability of sensor platforms in biomedical applications.

Carbon dots based FRET for the detection of DNA damage

Here, we aimed our attention at the synthesis of carbon dots (C-dots) with the ability to interact with DNA to suggest an approach for the detection of DNA damage. Primarily, C-dots modified with amine moieties were synthesized using the one-step microwave pyrolysis of citric acid in the presence of diethylenetriamine. The C-dots showed strong photoluminescence with a quantum yield of 4%. In addition, the C-dots (2.8±0.8nm) possessed a good colloidal stability and exhibited a positive surface charge (ζ=36mV) at a neutral pH. An interaction study of the C-dots and the DNA fragment of λ bacteriophage was performed, and the DNA binding resulted in changes to the photoluminescent and absorption properties of the C-dots. A binding of the C-dots to DNA was also observed as a change to DNA electrophoretic mobility and a decreased ability to intercalate ethidium bromide (EtBr). Moreover, the Förster (or fluorescence) resonance energy transfer (FRET) between the C-dots and EtBr was studied, in which the C-dots serve as an excitation energy donor and the EtBr serves as an acceptor. When DNA was damaged using ultraviolet (UV) radiation (λ=254nm) and hydroxyl radicals, the intensity of the emitted photoluminescence at 612nm significantly decreased. The concept was proved on analysis of the genomic DNA from PC-3 cells and DNA isolated from melanoma tissues.

Determination of pentachlorophenol by anodic electrochemiluminescence of Ru(bpy)32+ based on nitrogen-doped graphene quantum dots as co-reactant

A novel ultrasensitive Ru(bpy)₃²⁺-based anodic ECL sensor using NGQDs as co-reactant was developed for PCP detection.

Efficient double-quenching of electrochemiluminescence from CdS:Eu QDs by hemin-graphene-Au nanorods ternary composite for ultrasensitive immunoassay

A novel ternary composite of hemin-graphene-Au nanorods (H-RGO-Au NRs) with high electrocatalytic activity was synthesized by a simple method. And this ternary composite was firstly used in construction of electrochemiluminescence (ECL) immunosensor due to its double-quenching effect of quantum dots (QDs). Based on the high electrocatalytic activity of ternary complexes for the reduction of H₂O₂ which acted as the coreactant of QDs-based ECL, as a result, the ECL intensity of QDs decreased. Besides, due to the ECL resonance energy transfer (ECL-RET) strategy between the large amount of Au nanorods (Au NRs) on the ternary composite surface and the CdS:Eu QDs, the ECL intensity of QDs was further quenched. Based on the double-quenching effect, a novel ultrasensitive ECL immunoassay method for detection of carcinoembryonic antigen (CEA) which is used as a model biomarker analyte was proposed. The designed immunoassay method showed a linear range from 0.01 pg mL⁻¹ to 1.0 ng mL⁻¹ with a detection limit of 0.01 pg mL⁻¹. The method showing low detection limit, good stability and acceptable fabrication reproducibility, provided a new approach for ECL immunoassay sensing and significant prospect for practical application.