Understanding the effect of ultrathin AuPd alloy shells of irregularly shaped Au@AuPd nanoparticles with high-index facets on enhanced performance of ethanol oxidation

Synthetic Principles of Spiky Au Nanoparticles

In this work, the synthetic principles of spiky Au nanoparticles (spiky Au NPs) with an average number of spikes of less than or equal to six and controlled core sizes by using Au nanorods as seeds (Au-NR seeds) are summarized on the basis of the results of a series of control experiments. In addition, one empirical equation that can roughly estimate the number of spiky Au NPs is proposed, demonstrated by the results of the products prepared from different aspect ratios of Au-NRs as seeds and non-Au-NR seeds. Moreover, the synthetic principles of spiky Au NPs are further demonstrated by taking the successful synthesis of a serials of spiky Au21×7 NPs. Furthermore, the as-prepared spiky Au@Au11.8Pd88.2 NPs with ultrathin AuPd shells, which are derived from spiky Au21×7 NPs with the smallest cores, can bear excellent catalytic activity (say, E1/2 = 0.947 V) and durability toward the oxygen reduction reaction (ORR) in alkaline conditions, compared with commercial Pt/C catalysts (E1/2 = 0.883 V).

Carboxymethyl cellulose nanocolloids anchored Pd(0) nanoparticles (CMC@Pd NPs): synthesis, characterization, and catalytic application in transfer hydrogenation

Herein, we report on the preparation of novel colloidal system based on carboxymethyl cellulose (CMC) and Pd nanoparticles (CMC@Pd NPs) via an ecofriendly auto-reduction process under mild conditions. In the first step, the follow-up of reduction and preparation of CMC anchored palladium nanoparticles (Pd NPs) in aqueous solution was carried out using UV-Vis spectroscopy. Thereafter, the monodispersed colloids were fully characterized by advanced analytical, structural, and morphological techniques. Based on Scherrer equation, the as-synthesized CMC@Pd NPs crystallite size was about 10.88 nm. Accordingly, the detailed microscopic study revealed CMC nanocolloids anchored uniform distribution of Pd NPs and the presence of CMC nanofilm as protective monolayer. To the best of our knowledge, the observed nanoscale properties are reported for the first time for CMC-M system. The performance of the as-synthesized CMC@Pd nanocolloids was first investigated in the reduction of 4-nitrophenol, as a model substrate, to 4-aminophenol using NaBH4 as a hydrogen source. Moreover, the catalytic reduction of various nitroarenes bearing electron withdrawing or donating substituents was carried out and monitored by UV-Vis spectroscopy. The chemo- and regioselectivity of the catalytic reduction in presence of CMC@Pd NPs were also studied. Consequently, the prepared CMC@Pd nanocolloids exhibit remarkable activity, good heterogeneity, and higher reusability and stability for the catalytic reduction reaction under mild conditions.

Ethanol Oxidation via 12-Electron Pathway on Spiky Au@AuPd Nanoparticles Assisted by Near-Infrared Light

In this work, ethanol oxidation reaction (EOR) via 12-electron (C1-12e) pathway on spiky Au@AuPd nanoparticles (NPs) with ultrathin AuPd alloy shells is achieved in alkaline media with the assistance of the near-infrared (NIR) light. It is found that OH radicals can be produced from the OH_ads species adsorbed on the surfaces of Pd atoms led by surface plasmon resonance (SPR) effect of spiky Au@AuPd NPs under the irradiation of NIR light. Moreover, OH radicals play the key role for the achievement of EOR proceeded by the desirable C1-12e pathway because OH radicals can directly break the C-C bonds of ethanol. Accordingly, the electrocatalytic performance of spiky Au@AuPd NPs toward EOR under NIR light is greatly improved. For instance, their mass activity can be up to 33.2 A mg_pd ^-1 in the 0.5 m KOH solution containing 0.5 m ethanol, which is about 158 times higher than that of commercial Pd/C catalysts (0.21 A mg_pd ^-1 ) and is better than those of the state-of-the-art Pd-based catalysts reported in literature thus far, to the best of our knowledge. Moreover, their highest mass activity can be further improved to 118.3 A mg_pd ^-1 in the 1.5 m KOH solution containing 1.25 m ethanol.

The enhancement in the performance of ultra-small core-shell Au@AuPt nanoparticles toward HER and ORR by surface engineering

In this work, ultra-small core-shell (USCS) Au_38.4@Au_4.1Pt_57.5 nanoparticles (NPs) with an optimal Pt-to-Au ratio were successfully prepared by the optimal etching treatment of USCS Au@AuPt NPs by Fe(III) ions to remove some exposed Au atoms on their outermost surfaces. The as-prepared USCS Au_38.4@Au_4.1Pt_57.5 NPs with Fe(III)-etching treatment for 2 h loaded on carbon black as catalysts (USCS^2h Au_38.4@Au_4.1Pt_57.5-NP/C catalysts) exhibit superior electrocatalytic activity and durability for both the hydrogen evolution reaction (HER) and oxygen reduction reaction (ORR) in acidic media. For instance, the overpotential of USCS^2h Au_38.4@Au_4.1Pt_57.5-NP/C catalysts toward the HER is 13 mV at a current density of -10 mA cm^-2 (η₁₀ = 13 mV), which is much better than that of commercial Pt/C catalysts (η₁₀ = 31 mV). Moreover, their mass activity (63.8 A mg_Pt^-1) is about 16.4 times larger than that of commercial Pt/C catalysts (3.9 A mg_Pt^-1). In addition, they also present better long-term stability. Furthermore, they also show an improved activity toward the ORR in terms of the half-wave potential (E_1/2) (0.89 V vs. RHE), which is more positive by about 38 mV than commercial Pt/C catalysts (0.852 V). In addition, they also show a higher kinetic current density (14.22 mA cm^-2 at 0.85 V) and better long-term durability. This etching-treatment strategy can be extended to further improve the catalytic performance of ultra-small Au-based bimetallic or multi-metallic NPs by surface engineering.

Synthesis of Pd nanorod arrays on Au nanoframes for excellent ethanol electrooxidation

Au-Pd hollow nanostructures have attracted a lot of attention because of their excellent ethanol electrooxidation performance. Herein, we report a facile preparation of Au nanoframe@Pd array electrocatalysts in the presence of cetylpyridinium chloride. The reduced Pd atoms were directed to mainly deposit on the surface of the Au nanoframes in the form of rods, leading to the formation of Au nanoframe@Pd arrays with a super-large specific surface area. The red shift and damping of the plasmon peak were ascribed to the deposition of the Pd arrays on the surface of the Au nanoframes and nanobipyramids, which was verified by electrodynamic simulations. Surfactants, temperature and reaction time determine the growth process and thereby the architecture of the obtained Au-Pd hollow nanostructures. Compared with the Au nanoframe@Pd nanostructures and Au nanobipyramid@Pd arrays, the Au nanoframe@Pd arrays exhibit an enhanced electrocatalytic performance towards ethanol electrooxidation due to an abundance of catalytic active sites. The Au NF@Pd arrays display 4.1 times higher specific activity and 13.7 times higher mass activity than the commercial Pd/C electrocatalyst. Moreover, the nanostructure shows improved stability towards the ethanol oxidation reaction. This study enriches the manufacturing technology to increase the active sites of noble metal nanocatalysts and promotes the development of direct ethanol fuel cells.

A comprehensive and critical review of the recent progress in electrocatalysts for the ethanol oxidation reaction

The human craving for energy is continually mounting and becoming progressively difficult to gratify. At present, the world's massive energy demands are chiefly encountered by nonrenewable and benign fossil fuels. However, the development of dynamic energy cradles for a gradually thriving world to lessen fossil fuel reserve depletion and environmental concerns is currently a persistent issue for society. The discovery of copious nonconventional resources to fill the gap between energy requirements and supply is the extreme obligation of the modern era. A new emergent, clean, and robust alternative to fossil fuels is the fuel cell. Among the different types of fuel cells, the direct ethanol fuel cell (DEFCs) is an outstanding option for light-duty vehicles and portable devices. A critical tactic for obtaining sustainable energy sources is the production of highly proficient, economical and green catalysts for energy storage and conversion devices. To date, a broad range of research is available for using Pt and modified Pt-based electrocatalysts to augment the C₂H₅OH oxidation process. Pt-based nanocubes, nanorods, nanoflowers, and the hybrids of Pt with metal oxides such as Fe₂O₃, TiO₂, SnO₂, MnO, Cu₂O, and ZnO, and with conducting polymers are extensively utilized in both acidic and basic media. Moreover, Pd-based materials, transition metal-based materials, as well as transition metal-based materials are also points of interest for researchers nowadays. This review article delivers a broad vision of the current progress of the EOR process concerning noble metals and transition metals-based materials.

The Mimic Enzyme Properties of Au@PtNRs and the Detection for Ascorbic Acid Based on Their Catalytic Properties

Being superior to natural enzymes, nanoenzymes are drawing a great deal of attention in the field of biosensing. Herein, we developed an ultrasensitive, stable and selective colorimetric assay having dual functionalities of Au-tipped Pt nanorods (NRs). The optical and catalytic properties of Au-tipped Pt NRs were monitored using a spectrophotometer and the chromogenic substrate 3, 3′, 5, 5′-tetramethylbenzidine (TMB) in the presence of H2O2, respectively. We found that Au-tipped Pt NRs exhibited excellent peroxidase-like activity, which decomposed hydrogen peroxide (H2O2) into oxygen (O2). The produced O2 oxidized the chromogenic substrate into a blue color product. The oxidation rate of the chromogenic substrate could be monitored using a spectrophotometer at 652 nm. Notably, the peroxidase-like activity of Au-tipped Pt NRs decreased in the presence of ascorbic acid (AA). The produced O2 preferentially reacted with AA, generating ascorbyl radicals (AA·) instead of oxidizing TMB, and thereby decreased the oxidation rate of TMB. Based on this inhibitory property, a selective colorimetric assay was developed using Au-tipped Pt NRs for the detection of AA. This work offers a novel detection method for AA.

Fe(II)-Assisted one-pot synthesis of ultra-small core-shell Au-Pt nanoparticles as superior catalysts towards the HER and ORR

In this work, uniform ultra-small core-shell Au-Pt nanoparticles (denoted as USCS Au-Pt NPs) with Au-decorated Pt surfaces are successfully prepared by Fe(ii)-assisted one-pot co-reduction of Au(iii) ions and Pt(ii) ions in a citrate solution. The as-prepared USCS Au38.4@Au9.3Pt52.3 NPs have an average diameter of 2.3 ± 0.5 nm. It is found that the morphology, composition and size of Au-Pt NPs are highly dependent on the reaction conditions including the addition sequence of the precursors, and the concentrations of Fe(ii) ions, Au(iii) ions and Pt(ii) ions. In addition, USCS Au38.4@Au9.3Pt52.3-NP/C catalysts (USCS Au38.4@Au9.3Pt52.3 NPs loaded on the Vulcan XC-72R carbon black) exhibit excellent electrocatalytic performance towards the hydrogen evolution reaction (HER) and the oxygen reduction reaction (ORR) in acidic media due to the higher electrochemically active surface area (ECSA) and electronic effect between Pt and Au. For instance, USCS Au38.4@Au9.3Pt52.3-NP/C catalysts exhibited greatly enhanced HER activity in terms of overpotential (16 mV at a current density of -10 mA cm-2) and are better than commercial Pt/C catalysts (31 mV at a current density of -10 mA cm-2) reported in the literature thus far, to the best of our knowledge. Strikingly, their mass activity is about 13.1-fold higher than that of commercial Pt/C catalysts. Moreover, they also show an improved ORR activity, Eonset = 1.015 V and E1/2 = 0.896 V, which are positively shifted by nearly 28 mV and 21 mV than those of commercial Pt/C catalysts (0.987 V and 0.875 V), respectively. In addition, they also showed a higher kinetic current density (12.85 mA cm-2 at 0.85 V) and a better long-term durability. Our synthetic strategy presented here may be extended to the preparation of ultra-small Au-based bimetallic or multi-metallic NPs.

Tunable long-chains of core@shell PdAg@Pd as high-performance catalysts for ethanol oxidation

High performance nanomaterial catalysts have attracted great attention on the application for the direct alcohol fuel cell. To improve the catalytic behavior, it is a challenge to modulate the surface structure and morphology of catalysts. We integrated properties of advanced networks nanostructure and core@shell structure to form a series of PdAg@Pd worm-like networks catalysts. Importantly, the composition-optimized Pd₇₆Ag₂₄ WNWs exhibited excellent catalytic performance towards ethanol oxidation reaction compared to that of commercial Pd/C catalysts in alkaline media. The mass activity of Pd₇₆Ag₂₄ WNWs is 3.55 times higher than that of commercial Pd/C catalysts for EOR. Moreover, the Pd₇₆Ag₂₄ WNWs also showed superior stability after 250 successive cycles and kept far higher residual activities than that of the other catalysts. The synthesis of PdAg@Pd worm-like networks catalysts provides a reference to well combine the advantages of core@shell and networks structure to form high performance catalysts application for DEFC.

Nanomagnet-Silica Nanoparticles Decorated with Au@Pd for Enhanced Peroxidase-Like Activity and Colorimetric Glucose Sensing

Nanomagnet-silica shell (Fe₃O₄@SiO₂) decorated with Au@Pd nanoparticles (NPs) were synthesized successfully. The characterization of Fe₃O₄@SiO₂-NH₂-Au@PdNPs was achieved using several spectroscopic and microscopic techniques. The quantitative surface analysis was confirmed using X-ray photoelectron spectroscopy. The Fe₃O₄@SiO₂-NH₂-Au@Pd_0.30NPs exhibited excellent peroxidase-like activity by effectively catalyzing the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of H₂O₂. The absorption peaks at 370 and 652 nm confirmed the peroxidase-like activity of the Fe₃O₄@SiO₂-NH₂-Au@Pd_0.30NPs. The Michaelis-Menten constant (K_m) of 0.350 and 0.090 mM showed strong affinity toward H₂O₂ and TMB at Fe₃O₄@SiO₂-NH₂-Au@Pd_0.30NPs. The mechanism of the peroxidase-like activity was found to proceed via an electron transfer process. A simple colorimetric sensor based on glucose oxidase and Fe₃O₄@SiO₂-NH₂-Au@Pd_0.30NPs showed excellent selectivity and sensitivity towards the detection of glucose. The fabricated glucose biosensor exhibited a wide linear response toward glucose from 0.010 to 60.0 μM with an limit of detection of 60.0 nM and limit of quantification of 200 nM. The colorimetric biosensor based on Fe₃O₄@SiO₂-NH₂-Au@Pd_0.30NPs as a peroxidase mimic was also successfully applied for the determination of glucose concentrations in serum samples. The synthesized Fe₃O₄@SiO₂-NH₂-Au@Pd_0.30NPs nanozymes exhibited excellent potential as an alternative to horseradish peroxidase for low-cost glucose monitoring.

Compressive Strain in Core-Shell Au-Pd Nanoparticles Introduced by Lateral Confinement of Deformation Twinnings to Enhance the Oxidation Reduction Reaction Performance

In this work, quasi-spherical, uniform gold nanoparticles with rich deformation twinning (Au_dt NPs) were first synthesized with the assistance of copper(II) ions. Then, these Au_dt NPs were used as the cores for the fabrication of core-shell (CS) Au_dt-Pd NPs with ultrathin Pd layers, which also can bear compressive strain because of the formation of corrugated structured Pd shells led by the lateral confinement imposed by deformation twinning in the Au cores. The presence of compressive strain in the CS Au_dt-Pd NPs can result in the widening of the d-band width of the Pd shell and further the downshift of their d-band center, which can then improve the desorption ability of intermediates and still maintain the adsorption ability of the reactants because of the broad adsorption potential range. Taking the oxidation reduction reaction and the ethanol oxidation reaction as examples, the as-prepared Au_dt-Pd NPs indeed exhibited superior catalytic performances because of the synergism of compressive strain and the electronic effect. Thus, our work opens a new way to introduce compressive strain in the Pd-based CS NP catalysts, which can achieve the enhancement in the electrocatalytic performance by combining the merit of compressive strain and the electronic effect.

Nanocatalysts for Electrocatalytic Oxidation of Ethanol

The use of ethanol as a fuel in direct alcohol fuel cells depends not only on its ease of production from renewable sources, but also on overcoming the challenges of storage and transportation. In an ethanol-based fuel cell, highly active electrocatalysts are required to break the C-C bond in ethanol for its complete oxidation at lower overpotentials, with the aim of increasing the cell performance, ethanol conversion rates, and fuel efficiency. In recent decades, the development of wet-chemistry methods has stimulated research into catalyst design, reactivity tailoring, and mechanistic investigations, and thus, created great opportunities to achieve efficient oxidation of ethanol. In this Minireview, the nanomaterials tested as electrocatalysts for the ethanol oxidation reaction in acid or alkaline environments are summarized. The focus is mainly on nanomaterials synthesized by using wet-chemistry methods, with particular attention on the relationship between the chemical and physical characteristics of the catalysts, for example, catalyst composition, morphology, structure, degree of alloying, presence of oxides or supports, and their activity for ethanol electro-oxidation. As potential alternatives to noble metals, non-noble-metal catalysts for ethanol oxidation are also briefly reviewed. Insights into further enhancing the catalytic performance through the design of efficient electrocatalysts are also provided.

pH-Dependent growth of atomic Pd layers on trisoctahedral gold nanoparticles to realize enhanced performance in electrocatalysis and chemical catalysis

In this work, the controlled epitaxial growth of ultrathin Pd shells of a few atomic layers (denoted as nL) on the surfaces of gold nanoparticle (Au NP) cores of different morphologies (trisoctahedral, cubic, and spherical shapes) in the presence of cetyltrimethylammonium chloride (CTAC) was achieved by regulating the pH value of the aqueous CTAC solution and finely tuning the amount of the Pd precursor. It was found that the critical shell thickness for epitaxial Pd growth at the optimal pH value was 4 atomic layers, taking {331}-faceted trisoctahedral (TOH) Au@Pd_nL NPs as an example, on the basis of the results of atomic-resolution high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) images. Moreover, the resulting TOH Au@Pd_1L NPs (100.9 m² g^-1, 13.2 A mg_Pd^-1 and 13.1 mA cm^-2) exhibited excellent electrocatalytic performance and long-term electrocatalytic activity for ethanol oxidation, around 4.8-fold, 66-fold, and 21.8-fold better than commercial Pd/C catalysts (31 m² g^-1, 0.2 A mg_Pd^-1, and 0.6 mA cm^-2). Furthermore, the resulting TOH Au@Pd_1L NPs not only markedly enhance the chemical catalytic activity for the reduction of 4-nitrophenol (4-NP), but also allow the in situ surface-enhanced Raman spectroscopy (SERS) monitoring of the reaction process of the Pd-catalyzed reduction of 4-NTP. Thus, our work may provide a new way to fabricate core-shell (CS) bimetallic NPs with the merits of both metal outer shells (excellent catalytic performance in electrocatalysis and chemical catalysis) and Au NP cores (reaction process by in situ SERS monitoring).

Simple Synthesis of Au-Pd Alloy Nanowire Networks as Macroscopic, Flexible Electrocatalysts with Excellent Performance

The present work introduces a new way to prepare Au-Pd alloy nanowire networks (NWNs) via deposition of Pd atoms onto Au nanowires in reaction media at room temperature without the aid of additional reducing agents. Thanks to their excellent colloidal stability in water as well as in ethanol, the resulting NWNs can be utilized to produce composite thin films with Nafion (perfluorinated sulfonic acid) with dimensions above dozens of square centimeters by means of solution casting on the glass substrate. Most importantly, these films can be easily transferred onto different solid substrates by lift-off technology. Moreover, the resulting Au-Pd alloy NWNs can also be easily and thoroughly loaded into macroscopic carbon fiber cloth (CFC). Both the Au-Pd alloy NWN/Nafion composite film and the Au-Pd alloy NWN-loaded CFC can be used as flexible electrodes for electrocatalysis of ethanol oxidation, with electrocatalytic performance at different distorted states superior by 2 orders of magnitude to those reported in the literature (e.g., commercial Pd/C catalysts and Pd-based nanostructured catalysts). This work opens new possibilities for the large-scale manufacturing of electrodes for fuel cells.

Facile synthesis of bimetallic gold-palladium nanocrystals as effective and durable advanced catalysts for improved electrocatalytic performances of ethylene glycol and glycerol oxidation

In this work, well-defined bimetallic AuPd alloyed nanocrystals (AuPd NCs) were facilely synthesized by a straightforward and controllable one-step wet-chemical strategy, using a biomolecule (L-hydroxyproline, L-Hyp) as the green stabilizer and the structure-directing agent. Their morphology, size, composition, crystal structures and growth mechanism were investigated by a series of techniques. The synthesized architectures exhibited enlarged electrochemically active surface area (ECSA), improved catalytic activity, enhanced durability and stability towards ethylene glycol oxidation reaction (EGOR) and glycerol oxidation reaction (GOR) in alkaline electrolytes in comparison with commercial Pd black catalyst.

Morphological effects on the selectivity of intramolecular versus intermolecular catalytic reaction on Au nanoparticles

It is hard for metal nanoparticle catalysts to control the selectivity of a catalytic reaction in a simple process. In this work, we obtain active Au nanoparticle catalysts with high selectivity for the hydrogenation reaction of aromatic nitro compounds, by simply employing spine-like Au nanoparticles. The density functional theory (DFT) calculations further elucidate that the morphological effect on thermal selectivity control is an internal key parameter to modulate the nitro hydrogenation process on the surface of Au spines. These results show that controlled morphological effects may play an important role in catalysis reactions of noble metal NPs with high selectivity.

Organic-free synthesis of {001} facet dominated BiOBr nanosheets for selective photoreduction of CO2 to CO

BiOBr nanosheets synthesized in the presence of nitric acid exhibited high selectivity for photocatalytically converting CO₂ into CO.

Gold micromeshes as highly active electrocatalysts for methanol oxidation reaction

A high density of defects on the gold micromesh surface significantly enhances the electrochemical activity for the methanol oxidation reaction.

Microbial synthesis of highly dispersed PdAu alloy for enhanced electrocatalysis

Biosynthesis based on the reducing capacity of electrochemically active bacteria is frequently used in the reduction of metal ions into nanoparticles as an eco-friendly way to recycle metal resources. However, those bionanoparticles cannot be used directly as electrocatalysts because of the poor conductivity of cell substrates. This problem was solved by a hydrothermal reaction, which also contributes to the heteroatom doping and alloying between Pd and Au. With the protection of graphene, the aggregation of nanoparticles was successfully avoided, and the porous structure was maintained, resulting in better electrocatalytic activity and durability than commercial Pd/C under both alkaline (CH₃CH₂OH, 6.15-fold of mass activity) and acidic (HCOOH, 6.58-fold of mass activity) conditions. The strategy developed in this work opens up a horizon into designing electrocatalysts through fully utilizing the abundant resources in nature.