A fluorometric microarray with ZnO substrate-enhanced fluorescence and suppressed "coffee-ring" effects for fluorescence immunoassays

One-step fabrication of three-dimensional macropore copolymer-modified polycarbonate array by photo-crosslinking for protein immunoassay

A photocross-linked copolymer was prepared, and could rapidly form a macropore structure in phosphate buffer solution (PBS) without the addition of porogen. The photo-crosslinking process contained the crosslinking of the copolymer itself and that with the polycarbonate substrate. The three-dimensional (3D) surface was achieved through one-step photo-crosslinking of the macropore structure. The macropore structure can be finely regulated by multiple dimensions, including monomer structure of the copolymer, PBS and copolymer concentration. Compared with the two-dimensional (2D) surface, the 3D surface has a controllable structure, a high loading capacity (59 μg cm-2) and immobilization efficiency (92%), and the effect of inhibiting the coffee ring for protein immobilization. Immunoassay results show that a 3D surface immobilized by IgG has high sensitivity (LOD value of 5 ng mL-1) and broader dynamic range (0.005-50 μg mL-1). This simple and structure-controllable method for preparing 3D surfaces modified by macropore polymer has great potential applications in the fields of biochips and biosensing.

Surfactant Control of Coffee Ring Formation in Carbon Nanotube Suspensions

The coffee ring effect regularly occurs during the evaporation of colloidal droplets and is often undesirable. Here we show that adding a specific concentration of a surfactant can mitigate this effect. We have conducted experiments on aqueous suspensions of carbon nanotubes that were prepared with cationic surfactant dodecyltrimethylammonium bromide added at 0.2, 0.5, 1, 2, 5, and 10 times the critical micelle concentration. Colloidal droplets were deposited on candidate substrates for printed electronics with varying wetting characteristics: glass, polyethylene terephthalate, fluoroethylene propylene copolymer, and polydimethylsiloxane. Following drying, four pattern types were observed in the final deposits: dot-like, uniform, coffee ring deposits, and combined patterns (coffee ring with a dot-like central deposit). Evaporation occurred predominantly in constant contact radius mode for most pattern types, except for some cases that led to uniform deposits in which early stage receding of the contact line occurred. Image analysis and profilometry yielded deposit thicknesses, allowing us to identify a coffee ring subfeature in all uniform deposits and to infer the percentage coverage in all cases. Importantly, a critical surfactant concentration was identified for the generation of highly uniform deposits across all substrates. This concentration resulted in visually uniform deposits consisting of a coffee ring subfeature with a densely packed center, generated from two distinct evaporative phases.

Superhydrophilic–superhydrophobic patterned surfaces: From simplified fabrication to emerging applications

Superhydrophilic–superhydrophobic patterned surfaces constitute a branch of surface chemistry involving the two extreme states of superhydrophilicity and superhydrophobicity combined on the same surface in precise patterns. Such surfaces have many advantages, including controllable wettability, enrichment ability, accessibility, and the ability to manipulate and pattern water droplets, and they offer new functionalities and possibilities for a wide variety of emerging applications, such as microarrays, biomedical assays, microfluidics, and environmental protection. This review presents the basic theory, simplified fabrication, and emerging applications of superhydrophilic–superhydrophobic patterned surfaces. First, the fundamental theories of wettability that explain the spreading of a droplet on a solid surface are described. Then, the fabrication methods for preparing superhydrophilic–superhydrophobic patterned surfaces are introduced, and the emerging applications of such surfaces that are currently being explored are highlighted. Finally, the remaining challenges of constructing such surfaces and future applications that would benefit from their use are discussed.

A fluorimetric test strip with suppressed "Coffee Ring Effect" for selective mercury ion analysis

Nowadays, test strips are widely applied, but their use is mostly limited to the qualitative or half-quantitative analysis of targets. The main reason for their limited use is the "Coffee Ring Effect" (CRE) of probe materials, which leads to a heterogeneous probe distribution and poor testing reproducibility and sensitivity. In the present work, a fluorescent test strip was fabricated with a suppressed CRE of silver nanocluster (AgNC) probes coated by gelatin (Gel) under vacuum-aided fast lyophilization. Uniform and stable deposition of AgNC probes was achieved onto the test strips with a high loading capacity. The AgNCs displayed specific responses to Hg²⁺ ions, allowing sensitive and quantitative analysis in the linear concentration ranges from 0.20 to 50000 nM with a limit of detection of 0.10 nM. Given the advantages of rapid and facile preparation, CRE suppression, high biocompatibility, and cost-effectiveness, such a fabrication protocol may pave the way for the design of various test strips-based devices for point-of-care analytical applications in the fields of environmental monitoring, food quality analysis, and clinical diagnostics.

Reusable, Noninvasive, and Sensitive Fluorescence Enhanced ZnO-Nanorod-Based Microarrays for Quantitative Detection of AFP in Human Serum

The fabrication of sensitive protein microarrays such as PCR used in DNA microarray is challenging due to lack of signal amplification. The development of microarrays is utilized to improve the sensitivity and limitations of detection towards primal cancer detection. The sensitivity is enhanced by the use of ZnO-nanorods and is investigated as a substrate which enhance the florescent signal to diagnose the hepatocellular carcinoma (HCC) at early stages. The substrate for deposition of ZnO-nanorods is prepared by the conventional chemical bath deposition method. The resultant highly dense ZnO-nanorods enhance the fluorescent signal 7.2 times as compared to the substrate without ZnO-nanorods. The microarray showed sensitivity of 1504.7 ng ml⁻¹ and limit of detection of 0.1 pg ml⁻¹ in wide dynamic range of 0.05 pg-10 μg ml⁻¹ for alpha fetoprotein (AFP) detection in 10% human serum. This immunoassay was successfully applied for human serum samples to detect tumor marker with good recoveries. The ZnO-nanorod substrate is a simple protein microarray which showed a great promise for developing a low-cost, sensitive, and high-throughput protein assay platform for several applications in both fundamental research and clinical diagnosis.

Label-Free Cross-Priming Amplification Coupled With Endonuclease Restriction and Nanoparticles-Based Biosensor for Simultaneous Detection of Nucleic Acids and Prevention of Carryover Contamination

Here, we reported on a label-free cross-priming amplification (CPA) scheme that utilized endonuclease restriction for simultaneous detection of nucleic acids and elimination of carryover contamination. Reaction mixtures were detected in a nanoparticle-based lateral flow biosensor (LFB). The assay exhibited attractive traits in that it did not require the use of labeled primers or labeled probes, and thus, the technique could prevent undesired results arising from unwanted hybridization between labeled primers or between a probe and labeled primer. Isothermal amplification and endonuclease restriction digestion were conducted in a single pot, and the use of a closed-tube amplification removed false-positive results due to contaminants. To validate the assay's applicability, we employed the novel technique to detect the pathogen Staphylococcus aureus in pure cultures and artificial blood samples. The assay could detect target bacterium in pure culture with a 100 fg.μL^-1 detection limit, and in spiked blood samples with a 700 cfu.mL^-1 detection limit. The whole process, including sample procedure (20-min), isothermal amplification (60-min), endonuclease digestion (10-min) and result reporting (within 2-min), could be finished within 95-min. As a poof-of-concept assay, the technique devised in the current report could be employed for detecting various other sequences if the specific CPA primers were available.

An Aggregation-Induced Emission-Based Indirect Competitive Immunoassay for Fluorescence "Turn-On" Detection of Drug Residues in Foodstuffs

A new fluorescent "turn-on" probe-based immunosensor for detecting drug residues in foodstuffs was established by combining the mechanism of aggregation-induced emission (AIE) and an indirect competitive enzyme-linked immunosorbent assay (ELISA). In this study, a luminogen, with negligible fluorescence emission (TPE-HPro), aggregated in the presence of H2O2, and exhibited astrong yellow emission based on its AIE characteristics. This AIE process was further configured into an immunoassay for analyzing drug residues in foodstuffs. In this approach, glucose oxidase (GOx) was used as an enzyme label for the immunoassay and triggered GOx/glucose-mediated H2O2 generation, which caused oxidation of TPE-HPro and a "turn-on" fluorescence response at 540 nm. To quantitatively analyze the drug residues in foodstuffs, we used amantadine (AMD) as an assay model. By combining the AIE-active "turn-on" fluorescent signal generation mechanism with conventional ELISAs, quantifying AMD concentrations in chicken muscle samples was realized with an IC50 (50% inhibitory concentration) value of 0.38 ng/mL in buffer and a limited detection of 0.06 μg/kg in chicken samples. Overall, the conceptual integration of AIE with ELISA represents a potent and sensitive strategy that broadens the applicability of the AIE-based fluorometric assays.

A sensitive and selective electroanalysis strategy for histidine using the wettable well electrodes modified with graphene quantum dot-scaffolded melamine and copper nanocomposites

A wettable well was fabricated on an electrode, which was further modified with carbon quantum dot-scaffolded nanocomposites of melamine and copper for probing histidine through a unique displacement reaction route. The developed electrode with wettable well enables the condensing enrichment of analytes from the sample droplets, improving the electroanalytical sensitivity.

Finely Tunable Surface Wettability by Two-Dimensional Molecular Manipulation

Local molecular environment governs material interface properties, especially the substrate's exposing behavior and overall functionality expression. Although current techniques can provide efficient surface property modification, challenges in molecule spatial distribution and composition controls limited the generation of homogeneous and finely tunable molecular environment. In this study, Au-thiolate rupturing operation in chemical lift-off lithography (CLL) is used to manipulate the substrate interface molecular environment. The creation of randomly distributed artificial self-assembled monolayer defects generates vacancies for substrate property modification through back-insertion of molecules with opposite functionalities. Surface wettability adjustment is utilized as an example, where well-controllable molecule distribution provides finely tunable substrate affinity toward liquids with different physical properties. The distinct property difference between two surface regions assists microdroplet formation when liquids flow through, not only water solution but also low-surface-tension organic liquids. These microdroplet arrays become a template to guide material assembly in its formation process and act as pH-sensitive platforms for high-throughput detection. Furthermore, the tunability of the molecular pattern in this approach helps minimize the coffee-ring effect and the sweet-spot issue in matrix-assisted laser desorption/ionization mass spectrometry. Two-dimensional molecular manipulation in the CLL operation, therefore, holds the capability toward controlling homogeneous material surface property and toward exhibiting behavior adjustments.

Flexible Electronics Based on Micro/Nanostructured Paper

Over the past several years, a new surge of interest in paper electronics has arisen due to the numerous merits of simple micro/nanostructured substrates. Herein, the latest advances and principal issues in the design and fabrication of paper-based flexible electronics are highlighted. Following an introduction of the fascinating properties of paper matrixes, the construction of paper substrates from diverse functional materials for flexible electronics and their underlying principles are described. Then, notable progress related to the development of versatile electronic devices is discussed. Finally, future opportunities and the remaining challenges are examined. It is envisioned that more design concepts, working principles, and advanced papermaking techniques will be developed in the near future for the advanced functionalization of paper, paving the way for the mass production and commercial applications of flexible paper-based electronic devices.

Enhanced immunofluorescence detection of a protein marker using a PAA modified ZnO nanorod array-based microfluidic device

Zinc oxide (ZnO) often serves as protein microarray substrates owing to its outstanding fluorescence enhancement effect. However, the integration of functional substrates with microfluidic technology to detect cancer biomarkers still needs to be optimized and promoted, for example, the optimization of micro/nanostructure and hydrophilic modification strategies for fluorescence immunoassays. Here, ZnO nanorod arrays were constructed on the inner wall of glass capillaries through a microfluidic chemical method, and the electrostatic layer by layer self-assembly was applied to modify the nanorod array with hydrophilic polyelectrolyte-polyacrylic acid (PAA). The effects of the flow rate and the reagent concentration on the morphology of the ZnO nanorod array were investigated. The ZnO nanorod array-based glass capillary, prepared at 25 μL min-1 for 4 min with 50 mM Zn2+ in solution, showed a remarkable enhancement in fluorescence performance. In addition, the introduction of PAA suppressed the interference of nonspecific protein and improved the antibody loading capacity effectively. In the detection of carcinoembryonic antigen, the limit of detection reached 100 fg mL-1, which indicated that the ZnO@PAA nanorod array-based microfluidic device exhibits remarkable fluorescence detection performance towards protein markers and possesses potential to be applied to point-of-care diagnostics and high throughput cancer biomarker detection.

Superwettable Microwell Arrays Constructed by Photocatalysis of Silver-Doped-ZnO Nanorods for Ultrasensitive and High-Throughput Electroanalysis of Glutathione in Hela Cells

Superwettable microwell arrays were constructed for the first time by the synergic photocatalysis of silver-doped-ZnO (Ag-ZnO) nanorods patterned on indium tin oxide (ITO) electrodes for electroanalysis of glutathione (GSH) in hela cells through the signal output of AgCl electrochemistry. The newly prepared Ag-ZnO nanorods with high photocatalysis were dispersed into an octadecyltrichlorosilane (OTS) matrix to be deposited onto ITO substrates, yielding superhydrophobic Ag-ZnO-OTS coatings. Superhydrophilic microwells were further created by the Ag-ZnO photocatalysis under UV irradiation to produce Ag-ZnO microwell arrays featuring the superwettability profile. The resulting Ag-ZnO microwell-modified ITO electrodes were employed further for electroanalysis of GSH through solid-state AgCl electrochemistry, in which the specific Ag-GSH interactions would trigger a rational decrease in the sharp AgCl peak currents at the potential approaching zero. Moreover, benefitting from the superwettability feature, the microwells on the ITO electrodes could facilitate the condensing enrichment of GSH analytes from the sample droplets, achieving improved analysis sensitivity. The as-developed electroanalysis strategy was subsequently demonstrated for the detection of GSH in hela cell supernatant with levels down to about 27.30 pM. Additionally, this synergic photocatalysis-based preparation route can be tailored for the large-scale fabrication of various array platforms with the superwettability feature for high-throughput and sensitive biological analysis.

Rapid and sensitive detection of ketamine in blood using novel fluorescence genosensor

In recent years, drug abuse has been considered as a most challenging social problem that aroused public attention. Ketamine has increased in unregulated use as a 'recreational drug' in teenagers. However, there is no suitable and maneuverable detection method for ketamine in situ at the moment. Fluorescence sensor technique, with predominant recognition and simple operation, is a good potential application in drug detection. Here, we first reported a highly sensitive and selective fluorescence genosensor for rapid detection of ketamine based on DNA-templated silver nanoclusters (DNA-AgNCs) probes, in which the DNA sequence could specially recognize ketamine with high affinity. Parameters affecting detection efficiency were investigated and optimized. Under optimum conditions, the as-prepared genosensor can allow for the determination of ketamine in the concentration range of 0.0001-20 μg/mL with two linear equations: one is y = 2.84x-7.139 (R² = 0.987) for 0.0001-0.1 μg/mL, and the other is y = 1.87x-0.091 (R² = 0.962) for 0.1-20 μg/mL, and the estimated detection limit of ketamine is 0.06 ng/mL. Moreover, the feasibility of this proposed method was also demonstrated by analyzing forensic blood samples. Compared with official gas chromatography/mass spectrometry (GC/MS), this fluorescence genosensor is simple, rapid, and accurate for quantitative determination of ketamine in blood for pharmaceutical and forensic analysis. Overall, it is the first report on a fluorescence genosensor for detecting ketamine directly in blood. This research may provide a new insight for the analyst to band fluorescence genosensor technology together with drug monitoring in the battle against drug abuse and forensic examination. Graphical abstract High selectively detection of ketamine using a novel fluorescence genosensor based on DNA-AgNCs probe.

An on–off–on gold nanocluster-based fluorescent probe for sensitive detection of organophosphorus pesticides

In this study, a highly sensitive fluorescent probe based on bovine serum protein-protected gold nanoclusters (BSA-AuNCs) was developed for the determination of organophosphorus pesticides (OPs).

A high-throughput fluorimetric microarray with enhanced fluorescence and suppressed "coffee-ring" effects for the detection of calcium ions in blood

A rapid, ultrasensitive, and high-throughput fluorimetric microarray method has been developed using hydrophobic pattern as the microarray substrate and 3-aminopropyltriethoxysilane-coupled carboxylic acid calcium (APS-CCA) as the fluorescent probes for sensing Ca2+ ions in blood. The hydrophobic pattern of the developed Ca2+ analysis microarray could largely suppress the "coffee-ring" effects to facilitate the better distribution density of testing microspots toward the high-throughput detections, and especially prevent the cross-contamination of the multiple samples between adjacent microspots. Moreover, the use of APS matrix could endow the CCA probe the enhanced environmental stability and fluorescence intensity, which is about 2.3-fold higher than that of free CCA. The interactions between APS-CCA and Ca2+ ions were systematically characterized by UV-vis and fluorescence measurements including microscopy imaging. It was demonstrated that the fluorimetric microarray could display the strong capacity of specifically sensing Ca2+ ions with the minimal interferences from blood backgrounds. Such an APS-CCA-based fluorimetric microarray can allow for the analysis of Ca2+ ions down to 0.0050 mM in blood, promising a highly sensitive and selective detection candidate for Ca2+ ions to be applied in the clinical laboratory.

Fluorimetric Mercury Test Strips with Suppressed "Coffee Stains" by a Bio-inspired Fabrication Strategy

A fluorimetric Hg²⁺ test strip has been developed using a lotus-inspired fabrication method for suppressing the “coffee stains” toward the uniform distribution of probe materials through creating a hydrophobic drying pattern for fast solvent evaporation. The test strips were first loaded with the model probes of fluorescent gold-silver nanoclusters and then dried in vacuum on the hydrophobic pattern. On the one hand, here, the hydrophobic constraining forces from the lotus surface-like pattern could control the exterior transport of dispersed nanoclusters on strips leading to the minimized “coffee stains”. On the other hand, the vacuum-aided fast solvent evaporation could boost the interior Marangoni flow of probe materials on strips to expect the further improved probe distribution on strips. High aqueous stability and enhanced fluorescence of probes on test strips were realized by the hydrophilic treatment with amine-derivatized silicane. A test strips-based fluorimetry has thereby been developed for probing Hg²⁺ ions in wastewater, showing the detection performances comparable to the classic instrumental analysis ones. Such a facile and efficient fabrication route for the bio-inspired suppression of “coffee stains” on test strips may expand the scope of applications of test strips-based “point-of-care” analysis methods or detection devices in the biomedical and environmental fields.