Spiropyran-Based Photoisomerizable α-Amino Acid for Membrane-Active Peptide Modification

Photoisomerizable peptides are promising drug candidates in photopharmacology. While azobenzene- and diarylethene-containing photoisomerizable peptides have already demonstrated their potential in this regard, reports on the use of spiropyrans to photoregulate bioactive peptides are still scarce. This work focuses on the design and synthesis of a spiropyran-derived amino acid, (S)-2-amino-3-(6'-methoxy-1',3',3'-trimethylspiro-[2H-1-benzopyran-2,2'-indolin-6-yl])propanoic acid, which is suitable for the preparation of photoisomerizable peptides. The utility of this amino acid is demonstrated by incorporating it into the backbone of BP100, a known membrane-active peptide, and by examining the photoregulation of the membrane perturbation by the spiropyran-containing peptides. The toxicity of the peptides (against the plant cell line BY-2), their bacteriotoxicity (E. coli), and actin-auxin oscillator modulation ability were shown to be significantly dependent on the photoisomeric state of the spiropyran unit.

Transparent Organogels as a Medium for the Light-Induced Conversion from Spiropyran to Merocyanine

Low-molecular-weight peptide gelators are a versatile class of compounds able to form gels under a variety of conditions, even via simple ultrasound sonication. In this paper, the ability of Boc-L-Phe-D-Oxd-L-Phe-OBn to gelate three organic solvents (toluene, tert-butyl methyl ether, and ethanol) was evaluated. The rheological behaviour of the materials was assessed via strain sweep analysis, while the fibrous network was analysed via optical microscopy on the wet gels. The gel obtained from toluene is a highly transparent material, and the one from ethanol appears translucent, while the one from tert-butyl methyl ether is opaque. These gels were used to study the reversible light-induced transformation from spyropiran (SP) to merocyanine (MC) and back, as a model system to check the effect of the gel medium onto the rection kinetic. We observed that the solvent used to form the organogels has a crucial effect on the reaction, as gels from aprotic solvents stabilize the SP form, while the ones from protic solvents stabilize the MC form. We thus obtained a solid support to stabilize the two photochromic species just by changing the solvent polarity. Moreover, we could demonstrate that the self-assembled gels do not interfere with the light-driven conversion process, either starting from SP or MC, thus representing a valid and economical photochromic material.

Self-healing cyclic peptide hydrogels

Hydrogels are soft materials of great interest in different areas such as chemistry, biology, and therapy. Gels made by the self-assembly of small molecules are known as supramolecular gels. The modulation of their properties by monomer molecular design is still difficult to predict due to the potential impact of subtle structural modifications in the self-assembly process. Herein, we introduce the design principles of a new family of self-assembling cyclic octapeptides of alternating chirality that can be used as scaffolds for the development of self-healing hydrogelator libraries with tunable properties. The strategy was used in the preparation of an amphiphilic cyclic peptide monomer bearing an alkoxyamine connector, which allowed the insertion of different aromatic aldehyde pendants to modulate the hydrophobic/hydrophilic balance and fine-tune the properties of the resulting gel. The resulting amphiphiles were able to form self-healable hydrogels with viscoelastic properties (loss tangent, storage modulus), which were strongly dependent on the nature and number of aromatic moieties anchored to the hydrophilic peptide. Structural studies by SEM, STEM and AFM indicated that the structure of the hydrogels was based on a dense network of peptide nanotubes. Excellent agreement was established between the peptide primary structure, nanotube length distributions and viscoelastic behaviour.

Peptide-Based Low Molecular Weight Photosensitive Supramolecular Gelators

Over the last couple of decades, stimuli-responsive supramolecular gels comprising synthetic short peptides as building blocks have been explored for various biological and material applications. Though a wide range of stimuli has been tested depending on the structure of the peptides, light as a stimulus has attracted extensive attention due to its non-invasive, non-contaminant, and remotely controllable nature, precise spatial and temporal resolution, and wavelength tunability. The integration of molecular photo-switch and low-molecular-weight synthetic peptides may thus provide access to supramolecular self-assembled systems, notably supramolecular gels, which may be used to create dynamic, light-responsive “smart” materials with a variety of structures and functions. This short review summarizes the recent advancement in the area of light-sensitive peptide gelation. At first, a glimpse of commonly used molecular photo-switches is given, followed by a detailed description of their incorporation into peptide sequences to design light-responsive peptide gels and the mechanism of their action. Finally, the challenges and future perspectives for developing next-generation photo-responsive gels and materials are outlined.

Tough, Self-Recoverable, Spiropyran (SP3) Bearing Polymer Beads Incorporated PAM Hydrogels with Sole Mechanochromic Behavior

Spiropyran-containing hydrogels that can respond to external stimuli such as temperature, light, and stress have attracted extensive attention in recent years. However, most of them are generally dual or multiple stimuli-responsive to external stimuli, and the interplay of different stimulus responses is harmful to their sensitivity. Herein, spiropyran bearing polymer beads incorporated PAM (poly(AM–co–MA/DMSP3)) hydrogels with sole mechanochromic properties were synthesized by emulsion polymerization of acrylamide (AM) and methyl acrylate (MA) in the presence of spiropyran dimethacrylate mechanophore (DMSP3) crosslinker. Due to the hydrophobic nature of MA and DMSP3, the resultant hydrogel afforded a rosary structure with DMSP3 bearing polymer beads incorporated in the PAM network. It is found that the chemical component (e.g., AM, MA, and DMSP3 concentrations) significantly affect the mechanical and mechanoresponsive properties of the as-obtained poly(AM–co–MA/DMSP3) hydrogel. Under optimal conditions, poly(AM–co–MA/DMSP3) hydrogel displayed high mechanical properties (tensile stress of 1.91 MPa, a tensile strain of 815%, an elastic modulus of 0.67 MPa, and tearing energy of 3920 J/m²), and a good self-recovery feature. Owing to the mechanoresponsive of SP3, the hydrogels exhibited reversible color changes under force-induced deformation and relaxed recovery states. More impressive, the poly(AM–co–MA/DMSP3) hydrogel showed a linear correlation between tensile strain and chromaticity (x, y) as well as a stain and resting time-dependent color recovery rate. This kind of hydrogel is believed to have great potential in the application of outdoor strain sensors.

Solid Multiresponsive Materials Based on Nitrospiropyran-Doped Ionogels

The application of molecular switches for the fabrication of multistimuli-responsive chromic materials and devices still remains a challenge because of the restrictions imposed by the supporting solid matrices where these compounds must be incorporated: they often critically affect the chromic response as well as limit the type and nature of external stimuli that can be applied. In this work, we propose the use of ionogels to overcome these constraints, as they provide a soft, fluidic, transparent, thermally stable, and ionic-conductive environment where molecular switches preserve their solution-like properties and can be exposed to a number of different stimuli. By exploiting this strategy, we herein pioneer the preparation of nitrospiropyran-based materials using a single solid platform that exhibit optimal photo-, halo-, thermo-, and electrochromic switching behaviors.

Effect of polar amino acid incorporation on Fmoc-diphenylalanine-based tetrapeptides

Peptide hydrogels show great promise as extracellular matrix mimics due to their tuneable, fibrous nature. Through incorporation of polar cationic, polar anionic or polar neutral amino acids into the Fmoc-diphenylalanine motif, we show that electrostatic charge plays a key role in the properties of the subsequent gelators. Specifically, we show that an inverse relationship exists for biocompatibility in the solution state versus the gel state for cationic and anionic peptides. Finally, we use tethered bilayer lipid membrane (tBLM) experiments to suggest a likely mode of cytotoxicity for tetrapeptides which exhibit cytotoxicity in the solution state.

A review on recent advances in polymer and peptide hydrogels

In this review, we focus on the very recent developments on the use of the stimuli responsive properties of polymer hydrogels for targeted drug delivery, tissue engineering, and biosensing utilizing their different optoelectronic properties. Besides, the stimuli-responsive hydrogels, the conducting polymer hydrogels are discussed, with specific attention to the energy generation and storage behavior of the xerogel derived from the hydrogel. The electronic and ionic conducting gels have been discussed that have applications in various electronic devices, e.g., organic field effect transistors, soft robotics, ionic skins, and sensors. The properties of polymer hybrid gels containing carbon nanomaterials have been exemplified here giving attention to applications in supercapacitors, dye sensitized solar cells, photocurrent switching, etc. Recent trends in the properties and applications of some natural polymer gels to produce thermal and acoustic insulating materials, drug delivery vehicles, self-healing material, tissue engineering, etc., are discussed. Besides the polymer gels, peptide gels of different dipeptides, tripeptides, oligopeptides, polypeptides, cyclic peptides, etc., are discussed, giving attention mainly to biosensing, bioimaging, and drug delivery applications. The properties of peptide-based hybrid hydrogels with polymers, nanoparticles, nucleotides, fullerene, etc., are discussed, giving specific attention to drug delivery, cell culture, bio-sensing, and bioimaging properties. Thus, the present review delineates, in short, the preparation, properties, and applications of different polymer and peptide hydrogels prepared in the past few years.

NIR light-responsive short peptide/2D NbSe2 nanosheets composite hydrogel with controlled-release capacity

The design of light-responsive peptide hydrogels with controllable drug release characteristics is still a challenge.

A photo-degradable supramolecular hydrogel for selective delivery of microRNA into 3D-cultured cells

Multi-functional supramolecular hydrogels have emerged as smart biomaterials for diverse biomedical applications. Here we report a multi-functional supramolecular hydrogel formed by the conjugate of the bioactive GRGDS peptide with biaryltetrazole that is the substrate of photo-click reaction. The hydrogel was used as a biocompatible matrix to encapsulate live cells for 3D culture. The presence of the RGD epitope in the hydrogelator enhanced the interaction of the nanofiber with integrin over-expressing cells, which resulted in the selective enhancement in the miRNA delivery into the encapsulated U87 cells. The intramolecular photo-click reaction of the biaryltetrazole moiety in the hydrogelator leads to a sensitive photo-response of the hydrogel, which allowed photo-degradation of the hydrogel for release of the encapsulated live cells for further bio-assay of the intracellular species.

Supramolecular biofunctional materials

This review discusses supramolecular biofunctional materials, a novel class of biomaterials formed by small molecules that are held together via noncovalent interactions. The complexity of biology and relevant biomedical problems not only inspire, but also demand effective molecular design for functional materials. Supramolecular biofunctional materials offer (almost) unlimited possibilities and opportunities to address challenging biomedical problems. Rational molecular design of supramolecular biofunctional materials exploit powerful and versatile noncovalent interactions, which offer many advantages, such as responsiveness, reversibility, tunability, biomimicry, modularity, predictability, and, most importantly, adaptiveness. In this review, besides elaborating on the merits of supramolecular biofunctional materials (mainly in the form of hydrogels and/or nanoscale assemblies) resulting from noncovalent interactions, we also discuss the advantages of small peptides as a prevalent molecular platform to generate a wide range of supramolecular biofunctional materials for the applications in drug delivery, tissue engineering, immunology, cancer therapy, fluorescent imaging, and stem cell regulation. This review aims to provide a brief synopsis of recent achievements at the intersection of supramolecular chemistry and biomedical science in hope of contributing to the multidisciplinary research on supramolecular biofunctional materials for a wide range of applications. We envision that supramolecular biofunctional materials will contribute to the development of new therapies that will ultimately lead to a paradigm shift for developing next generation biomaterials for medicine.

Redox-responsive supramolecular hydrogel based on 10-hydroxy camptothecin-peptide covalent conjugates with high loading capacity for drug delivery

A redox-responsive supramolecular hydrogel system was developed for delivering 10-hydroxy camptothecin (HCPT). The hydrogel was formed by cleaving disulfide bond. The combination of hydrophobic HCPT with hydrogel was a simple and effective way to improve the solubility of HCPT and the drug loading capacity of delivery system. The transmission electron microscopy (TEM) image revealed the self-assembled hydrogel was long and thin nanofibers with a width of <10nm. Rheological test verified the hydrogel had fine physical properties. In vitro release experiment showed that the accumulative releasing percentages within 72h of HCPT-peptide hydrogels at 3.0%, 4.0%, 5.0% were 16.8%, 21.3%, and 26.8% respectively, which indicated the HCPT-peptide hydrogels had a significantly sustained-release characteristic. Besides, in vitro anticancer assay showed that HCPT-peptide hydrogels possessed a favorable anticancer efficacy. These results indicated that HCPT-peptide hydrogel had great potential for cancer treatment as a novel injectable drug delivery system.

Enzyme-instructed self-assembly with photo-responses for the photo-regulation of cancer cells

Enzyme-instructed self-assembly was regulated by photo-irradiation to turn on the fluorescence as well as to induce a disassembly process.

Light-induced decarboxylation in a photo-responsive iron-containing complex based on polyoxometalate and oxalato ligands

A new iron-oxalato polyoxometalate exhibits a remarkable photocoloration effect in the solid state based entirely on an intramolecular process.

A new photoresponsive molecular polyanion in which two Fe(iii) ions are simultaneously coordinated by two [A-α-PW₉O₃₄]^9– polyoxometalate units and two oxalato ligands has been obtained. When irradiated with UV light its potassium salt, 1, exhibits a remarkable photocoloration effect, attributable to the partial reduction of the POM units to give rise to a mixed-valence species. The photoinduced process is intramolecular and involves electron transfer from the oxalato ligands, which partially decompose releasing CO₂, towards the Fe(iii) and the POM. This mechanism has been confirmed by DRS, IR, XPS and Mössbauer spectroscopy, magnetism and elemental analysis. An analogous derivative of 1 containing malonato ligands does not exhibit such photoactive behaviour, which is evidence that the oxalate ligand is essential for the photoactivity of 1. To our knowledge, 1 represents the first POM-based compound in which the photocoloration effect does not require the presence of intermolecular short interactions.

The unusual solvatochromism and solvatofluorochromism of longwave absorbing and emitting barbiturate merocyanine dyes

Spectral-fluorescent properties of a series of merocyanine dyes comprising the barbituric acid residue as the electron-accepting terminal group are investigated in comparison with those of their N,N-methylated analogues in media of various polarity. It is revealed that in polar aprotic solvents the electronic absorption spectra of the studied compounds are influenced dramatically by the formation of hydrogen bonds between the NH-groups of barbituric residue and solvent molecules. An effect of such nucleophilic solvation on the electronic structure of the studied dyes is analysed using both the spectral data obtained and the DFT/B3LYP quantum chemical simulation. It is found also, that solvation has comparatively weak influence on the shape and position of the fluorescence bands of the studied merocyanines while the fluorescence quantum yield changes substantially in solvents of various polarity.

The Enzyme-instructed assembly of the core of yeast prion Sup35 to form supramolecular hydrogels

Based on the self-assembly capability of the core segment (GNNQQNY) of yeast prion Sup35, we design and synthesis a series of structurally related precursors for enzymatic formation of hydrogels. We found that, with the catalysis of alkaline phosphatase, the precursor becomes a hydrogelator that self-assembles in water to form nanofibers with an average width less than ten nanometers. Interestingly, the introduction of amyloid segment into a cytotoxic precursor (N'ffyp: D-1P) is able to abrogate the cytotoxicity of the precursor, making the resulting peptide to be cell compatible. This work contributes a new insight to the use of enzyme to form cell compatible hydrogels of peptides cross-β spine.

A dual-functional supramolecular hydrogel based on a spiropyran–galactose conjugate for target-mediated and light-controlled delivery of microRNA into cells

A dual-functional supramolecular hydrogel was developed for light-controlled release of miRNA and target-mediated delivery of miRNA into cells.