Polyoxometalate-Polymer Directed Macromolecular Architectonics of Silver Nanoparticles as Effective Antimicrobials

A novel inorganic-organic-inorganic ternary bioactive material formulated on antimicrobial peptide-based polymer has been reported. Supramolecular approach has been employed to incorporate molecularly crowded tyrosine-based polymer stabilized silver nanoparticles into membrane bound vesicles exploiting polyoxometalate-triggered surface templating strategy. Utilizing the covalent reversible addition fragmentation chain transfer (RAFT) polymerization and exploiting templated supramolecular architectonics at biopolymer interface, the bioactive ternary polymeric nanohybrids have been designed against Shigellosis leveraging the antibacterial activities of silver nanoparticle, cationic amphiphilic tyrosine polymer and inorganic polyoxometalate. The detail investigation against Shigella flexneri 2a cell line demonstrates that the collaborative mechanism of the ternary hybrid composite enhances the bactericidal activity in comparison to only polyoxometalate and polymer stabilized silver nanoparticle with an altered mechanism of action which is established via detailed biological analysis.

Synergistic Combination of Antimicrobial Peptides and Cationic Polyitaconates in Multifunctional PLA Fibers

Combining different antimicrobial agents has emerged as a promising strategy to enhance efficacy and address resistance evolution. In this study, we investigated the synergistic antimicrobial effect of a cationic biobased polymer and the antimicrobial peptide (AMP) temporin L, with the goal of developing multifunctional electrospun fibers for potential biomedical applications, particularly in wound dressing. A clickable polymer with pendent alkyne groups was synthesized by using a biobased itaconic acid building block. Subsequently, the polymer was functionalized through click chemistry with thiazolium groups derived from vitamin B1 (PTTIQ), as well as a combination of thiazolium and AMP temporin L, resulting in a conjugate polymer-peptide (PTTIQ-AMP). The individual and combined effects of the cationic PTTIQ, Temporin L, and PTTIQ-AMP were evaluated against Gram-positive and Gram-negative bacteria as well as Candida species. The results demonstrated that most combinations exhibited an indifferent effect, whereas the covalently conjugated PTTIQ-AMP displayed an antagonistic effect, potentially attributed to the aggregation process. Both antimicrobial compounds, PTTIQ and temporin L, were incorporated into poly(lactic acid) electrospun fibers using the supercritical solvent impregnation method. This approach yielded fibers with improved antibacterial performance, as a result of the potent activity exerted by the AMP and the nonleaching nature of the cationic polymer, thereby enhancing long-term effectiveness.

Research Advances on the Bioactivity of 1,2,3-Triazolium Salts

1,2,3-Triazolium salts have demonstrated significant potential in the fields of medicine and agriculture, exhibiting exceptional antibacterial, antifungal, anticancer, and antileishmanial properties. Moreover, these salts can be utilized as additives or components to produce nano- and fiber-based materials with antibacterial properties. In this review, we summarize several synthetic strategies to obtain 1,2,3-triazolium salts and the structures of 1,2,3-triazolium derivatives with biological activities in the domains of pharmaceuticals, pesticides, and functional materials. Additionally, the structure-activity relationship (SAR) of 1,2,3-triazolium salts with different biological activities has been analyzed. Finally, this review presents the potential applications and prospects of 1,2,3-triazolium salts in the fields of agriculture, medicine, and industrial synthesis.

Photocured Poly(Mannitol Sebacate) with Functional Methacrylic Monomer: Analysis of Physical, Chemical, and Biological Properties

In this work, we described the formation of polymeric networks with potential antimicrobial character based on an acrylate oligomer, poly(mannitol sebacate) (PMS), and an enzymatically synthesized methacrylic monomer with thiazole groups (MTA). Networks with different content of MTA were prepared, and further physico-chemically characterized by microhardness, water contact angle measurements, and differential scanning calorimetry. Monomer incorporation into the networks and subsequent quaternization to provide thiazolium moieties affected the mechanical behavior and the surface wettability of the networks. Moreover, the introduction of permanent cationic charges in the network surface could give antimicrobial activity to them. Therefore, the antibacterial behavior and the hemotoxicity were analyzed against Gram-positive and Gram-negative bacteria and red blood cells, respectively.

Synthesis and characterization of thiazolium chitosan derivative with enhanced antimicrobial properties and its use as component of chitosan based films

In this work, chemical modification of chitosan using cationic thiazolium groups was investigated with the aim to improve water solubility and antimicrobial properties of chitosan. Enzymatic synthesis and ethyl-3-(3-dimethylaminopropyl) carbodiimide/N-hydroxysuccinimide (EDC/NHS) chemistry were employed to synthesize and attach to chitosan through the amine groups the molecule bearing thiazolium moieties, quaternized 4-(2-(4-methylthiazol-5-yl) ethoxy)-4-oxobutanoic acid (MTBAQ). On the basis of Fourier transform infrared spectroscopy (FTIR), elemental analysis and solid state nuclear magnetic resonance (ssNMR), around 95 % of the available amine groups of chitosan (of 25 % degree of acetylation) reacted. The resulting derivative was water soluble at physiological pH and exhibit excellent antimicrobial activity against Listeria innocua, Staphylococcus epidermidis, Staphylococcus aureus and Methicillin Resistant S. aureus Gram-positive bacteria (MIC = 8-32 μg/ mL), whereas its efficiency decreases against fungi Candida albicans and Eschericia coli Gram-negative bacterium. Subsequently, the thiazolium chitosan derivative was employed as antimicrobial component (up to 7 wt%) of chitosan/glycerol based films. The incorporation of the chitosan derivative does not modify significantly the characteristics of the film in terms of thermal and mechanical properties, while enhances considerably the antimicrobial activity.

Effects of Hydrophobicity on Antimicrobial Activity, Selectivity, and Functional Mechanism of Guanidinium-Functionalized Polymers

In this study, a series of guanidinium-functionalized polycarbonate random co-polymers is prepared from organocatalytic ring-opening polymerization to investigate the effect of the hydrophobic side chain (ethyl, propyl, isopropyl, benzyl, and hexyl) on their antimicrobial activity and selectivity. Although the polymers exhibit similar minimum inhibitory concentrations, the more hydrophobic polymers exhibit a faster rate of bacteria elimination. At higher percentage content (20 mol%), polymers with more hydrophobic side chains suffer from poor selectivity due to their high hemolytic activity. The highly hydrophobic co-polymer, containing the hydrophobic hexyl-functionalized cyclic carbonate, kills bacteria via a membrane-disruptive mechanism. Micelle formation leads to a lower extent of membrane disruption. This study unravels the effects of hydrophobic side chains on the activities of the polymers and their killing mechanism, providing insights into the design of new antimicrobial polymers.

Preparation of new bio-based antibacterial acrylic bone cement via modification with a biofunctional monomer of nitrofurfuryl methacrylate

The new bio-based antibacterial p(NFMA-co-MMA) bone cement exhibits excellent antibacterial performance in the treatment of osteoporotic vertebral compression fracture.

Construction of cucurbit[n]uril-based supramolecular frameworks via host-guest inclusion and functional properties thereof

Frameworks utilizing cucurbit[n]uril-based chemistry build on the rapid developments in the fields of metal-organic frameworks (MOFs), covalent-organic frameworks (COFs), and supramolecular organic frameworks (SOFs), and as porous materials have found...

Quaternary tannic acid with improved leachability and biocompatibility for antibacterial medical thermoplastic polyurethane catheters

The surfaces of indwelling catheters offer sites for the adherence of bacteria to form biofilms, leading to various infections. Therefore, the development of antibacterial materials for catheters is imperative. In this study, combining the strong antibacterial effect of a quaternary ammonium salt (QAS) and the high biocompatibility of tannic acid (TA), we prepared a quaternary tannic acid (QTA) by grafting a synthesized quaternary ammonium salt, dimethyl dodecyl 6-bromohexyl ammonium bromide, onto TA. To prepare antibacterial catheters, QTA was blended with thermoplastic polyurethane (TPU) via melt extrusion, which is a convenient and easy-to-control process. Characterization of the TPU blends showed that compared with those of the QAS, dissolution rate and biocompatibility of QTA were significantly improved. On the premise that the introduction of QTA had only a slight effect on the original mechanical properties of pristine TPU, the prepared TPU/QTA maintained satisfactory antibacterial activities in vitro, under a flow state, as well as in vivo. The results verified that the TPU/QTA blend with a QTA content of 4% is effective, durable, stable, and non-toxic, and exhibits significant potential as a raw material for catheters.

Dual-Cationic Poly(ionic liquid)s Carrying 1,2,4-Triazolium and Imidazolium Moieties: Synthesis and Formation of a Single-Component Porous Membrane

Both imidazolium and 1,2,4-triazolium cations are important functional moieties widely incorporated as building blocks in poly(ionic liquid)s (PILs). In a classical model, a PIL usually contains either imidazolium or 1,2,4-triazolium in its repeating unit. Herein, via exploiting the slight reactivity difference of alkyl bromide with imidazole and 1,2,4-triazole at room temperature, we synthesized dual-cationic PIL homopolymers carrying both imidazolium and 1,2,4-triazolium moieties in the same repeating unit, that is, an asymmetrically dicationic unit. We investigated their fundamental properties, for example, thermal stability and solubility, as well as their unique function in forming supramolecular porous membranes via a water-initiated phase-separation and cross-linking process. With such knowledge, we identified a water-based fabricate strategy toward air-stable porous membranes from single-component PILs. This study will enrich the design tools and chemical structure library of PILs and expand their application spectrum.

Incorporation of Poly(Itaconic Acid) with Quaternized Thiazole Groups on Gelatin-Based Films for Antimicrobial-Active Food Packaging

Poly(itaconic acid) (PIA) was synthesized via conventional radical polymerization. Then, functionalization of PIA was carried out by an esterification reaction with the heterocyclic groups of 1,3-thiazole and posterior quaternization by N-alkylation reaction with iodomethane. The modifications were confirmed by Fourier transform infrared (FTIR) and proton nuclear magnetic resonance (1H-NMR), as well as ζ-potential measurements. Their antimicrobial activity was tested against different Gram-negative and Gram-positive bacteria. After characterization, the resulting polymers were incorporated into gelatin with oxidized starch and glycerol as film adjuvants, and dopamine as crosslinking agent, to develop antimicrobial-active films. The addition of quaternized polymers not only improved the mechanical properties of gelatin formulations, but also decreased the solution absorption capacity during the swelling process. However, the incorporation of synthesized polymers increased the deformation at break values and the water vapor permeability of films. The antioxidant capacity of films was confirmed by radical scavenging ability and, additionally, those films exhibited antimicrobial activity. Therefore, these films can be considered as good candidates for active packaging, ensuring a constant concentration of the active compound on the surface of the food, increasing products' shelf-life and reducing the environmental impact generated by plastics of petrochemical origin.

Biobased polymers derived from itaconic acid bearing clickable groups with potent antibacterial activity and negligible hemolytic activity

We report the synthesis of new biobased polymers derived from itaconic acid with excellent antibacterial activity against Gram-positive bacteria and very low hemotoxicity.

Preparation of medical hydrophilic and antibacterial silicone rubber via surface modification

Bacterial adhesion of medical indwelling devices shortens their service life and brings about infections in patients. The combination of hydrophilic and antibacterial modifications can not only kill the bacteria in contact with the surface, but also avoid the adhesion of dead bacteria. From this view, with a self-made quaternary ammonium salt and a zwitterion as the modifiers, a modified silicone rubber, SR-g-(DMAPS-co-QA), was prepared via random co-grafting. The static water angle test and antibacterial assays proved the enhancement of both the hydrophilicity and antibacterial activity. In addition, compared with the unmodified silicone rubber, after 7 days of co-cultivation in E. coli suspension, SR-g-(DMAPS-co-QA) demonstrated good resistance to biofilm formation. Furthermore, to simulate the real situation, its antibacterial effect in dynamic flow condition was measured, confirming that SR-g-(DMAPS-co-QA) still maintained good antibacterial performance after a 48 hour cyclic flow of E. coli bacterial suspension.

Surface modification of silicone rubber to enhance hydrophilicity and antibacterial effect.

Chemical Hydrogels Bearing Thiazolium Groups with a Broad Spectrum of Antimicrobial Behavior

Several hydrogels based on 2-hydroxyethyl methacrylate and a methacrylic monomer containing a thiazole group in its lateral chain have been prepared by thermal polymerization at 60 °C in water solution varying the chemical composition of the gels. The posterior quaternization of the thiazole groups with methyl iodine has rendered positively charged hydrogels with potential antimicrobial activity. This modification has been structurally characterized by infrared spectroscopy, whereas the thermal stability of all hydrogels has been studied by thermal degradation in inert atmosphere. The swelling behavior in distilled water and the rheology of the different hydrogels have been analyzed as a function of 2-(4-methylthiazol-5-yl)ethyl methacrylate (MTA) monomer content as well as its methylation. Finally, the active character of hydrogels against Gram-positive and Gram-negative bacteria and fungi has been evaluated, revealing excellent antimicrobial activity against all tested microorganisms. The methylated hydrogels could be used as potential materials for wound healing or contact lens applications.

Synthesis of Dimethyl Octyl Aminoethyl Ammonium Bromide and Preparation of Antibacterial ABS Composites for Fused Deposition Modeling

Additive manufacturing (AM) demonstrates benefits in the high-precision production of devices with complicated structures, and the modification of materials for AM is an urgent need. To solve the bacterial infection of medical devices in their daily application, dimethyl octyl aminoethyl ammonium bromide (octyl-QDED), an organic antibacterial agent, was synthesized via the quaternary ammonium reaction. Then, the synthesized octyl-QDED was blended with acrylonitrile butadiene styrene (ABS) through the melt extrusion process to prepare antibacterial composite filaments for fused deposition modeling (FDM). The entire preparation processes were convenient and controllable. Characterizations of the structure and thermal stability of octyl-QDED confirmed its successful synthesis and application in the subsequent processes. The introduced maleic acid in the blending process acted as a compatibilizer, which improved the compatibility between the two phases. Characterizations of the rheological and mechanical properties proved that the addition of octyl-QDED made a slight difference to the comprehensive performance of the ABS matrix. When the content of octyl-QDED reached 3 phr, the composites showed excellent antibacterial properties. The prepared antibacterial composite filaments for FDM demonstrated great potential in medical and surgical areas.

Antibacterial Character of Cationic Polymers Attached to Carbon-Based Nanomaterials

The preparation of hybrid polymeric systems based on carbon derivatives with a cationic polymer is described. The polymer used is a copolymer of a quaternizable methacrylic monomer with another dopamine-based monomer capable of anchoring to carbon compounds. Graphene oxide and graphene as well as hybrid polymeric systems were widely characterized by infrared, Raman and photoemission X-ray spectroscopies, electron scanning microscopy, zeta potential and thermal degradation. These allowed confirming the attachment of copolymer onto carbonaceous materials. Besides, the antimicrobial activity of hybrid polymeric systems was tested against Gram positive Staphylococcus aureus and Staphylococcus epidermidis and Gram negative Escherichia coli and Pseudomonas aeruginosa bacteria. The results showed the antibacterial character of these hybrid systems.

Synthetic macromolecules as therapeutics that overcome resistance in cancer and microbial infection

Synthetic macromolecular antimicrobials have shown efficacy in the treatment of multidrug resistant (MDR) pathogens. These synthetic macromolecules, inspired by Nature's antimicrobial peptides (AMPs), mitigate resistance by disrupting microbial cell membrane or targeting multiple intracellular proteins or genes. Unlike AMPs, these polymers are less prone to degradation by proteases and are easier to synthesize on a large scale. Recently, various studies have revealed that cancer cell membrane, like that of microbes, is negatively charged, and AMPs can be used as anticancer agents. Nevertheless, efforts in developing polymers as anticancer agents has remained limited. This review highlights the recent advancement in the development of synthetic biodegradable antimicrobial polymers (e.g. polycarbonates, polyesters and polypeptides) and anticancer macromolecules including peptides and polymers. Additionally, strategies to improve their in vivo bioavailability and selectivity towards bacteria and cancer cells are examined. Lastly, future perspectives, including use of artificial intelligence or machine learning, in the development of antimicrobial and anticancer macromolecules are discussed.

Comparison of poly(ethylene glycol)-based networks obtained by cationic ring opening polymerization of neutral and 1,2,3-triazolium diepoxy monomers

The properties of two cross-linked epoxy networks obtained by ring opening polymerization of a synthetic diepoxy 1,2,3-triazolium and a commercial poly(ethylene glycol)diglycidyl ether using benzylamine trifluoroborate as cationic initiator are compared.

Influence of Polymer Composition and Substrate on the Performance of Bioinspired Coatings with Antibacterial Activity

A series of methacrylic copolymers bearing thiazolium cationic groups and catechol moieties were evaluated as antibacterial coatings on a variety of materials including aluminum and plastics such as polycarbonate, poly(methyl methacrylate), and silicone rubber. The thermal properties of the copolymers were first studied by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The cationic copolymers were thermally stable up to 200 °C and presented glass transition temperatures values well above 100 °C; thus, an acceptable thermal behavior for typical biomedical applications. The cationic copolymers with variable content of the adhesive anchoring N-(3,4-dihydroxyphenethyl) methacrylamide (DOMA) units were coated onto the metal and polymeric substrates by drop casting and the adhesive properties of the obtained coatings were further evaluated as a function of DOMA content and substrate. Optical profilometry, attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectra, and antimicrobial studies reveal that the coatings adhere stronger to metal substrates than to the polymeric substrates. The copolymers with higher content of DOMA, 24 mol.%, resist solvent erosion treatment when coated onto all substrates and exhibit antimicrobial activity against Gram-positive S. aureus bacteria after this erosion treatment. In contrast, copolymers with low content, 9 mol.% of DOMA, only remain attached onto the aluminum metal substrate after solvent treatment, while on polymeric substrates the coatings are almost removed and do not show any efficacy against S. aureus bacteria.

3-Arm star pyrene-functional PMMAs for efficient exfoliation of graphite in chloroform: fabrication of graphene-reinforced fibrous veils

3-Arm PMMAs end-functionalized by pyrene were designed as dispersing/stabilizing agents for the liquid-phase exfoliation of graphite in low-boiling point solvents like chloroform. The synthetic procedure comprised ARGET ATRP controlled polymerization, click chemistry and the quaternization reaction of triazole, ensuring tailor-made, well-defined pyrene-functional star PMMAs. Among a series of different pyrene-functional macromolecular topologies, the (PMMA-py2)3 proved the most efficient exfoliation agent giving relatively high graphene concentration (0.36 mg ml-1) at exceptionally low polymer/graphite mass ratio (mP/mGF = 0.003) and short sonication time (3 h). A 5-cycle iterative procedure relying on the redispersion of the sediment was developed yielding CG = 1.29 mg ml-1 with 14.8% exfoliation yield, under the favorable conditions of 10.5 h total shear mixing/tip sonication time and overall mP/mGF ratio as low as 0.15. In parallel, all-atom molecular dynamics simulations were conducted which helped understand the mechanism by which pyrene-functional macromolecular topologies act as efficient dispersing agents of graphene. Finally the G@(PMMA-Py)3 hybrids were well dispersed into the PMMA matrix by electrospinning to fabricate graphene-based nanocomposite fibrous veils. These graphene/polymer nanocomposites exhibited enhanced stiffness and strength by a factor of 4.4 with 1.5 wt% graphene hybrids as nanofillers.

Providing Antibacterial Activity to Poly(2-Hydroxy Ethyl Methacrylate) by Copolymerization with a Methacrylic Thiazolium Derivative

Antimicrobial polymers and coatings are potent types of materials for fighting microbial infections, and as such, they have attracted increased attention in many fields. Here, a series of antimicrobial copolymers were prepared by radical copolymerization of 2-hydroxyethyl methacrylate (HEMA), which is widely employed in the manufacturing of biomedical devices, and the monomer 2-(4-methylthiazol-5-yl)ethyl methacrylate (MTA), which bears thiazole side groups susceptible to quaternization, to provide a positive charge. The copolymers were further quantitatively quaternized with either methyl or butyl iodide, as demonstrated by nuclear magnetic resonance (NMR) and attenuated total reflection Fourier-transform infrared spectroscopy (ATR-FTIR). Then, the polycations were characterized by zeta potential measurements to evaluate their effective charge and by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) to evaluate their thermal properties. The ζ-potential study revealed that the quaternized copolymers with intermediate compositions present higher charges than the corresponding homopolymers. The cationic copolymers showed greater glass transition temperatures than poly(2-hydroxyethyl methacrylate) (PHEMA), with values higher than 100 °C, in particular those quaternized with methyl iodide. The TGA studies showed that the thermal stability of polycations varies with the composition, improving as the content of HEMA in the copolymer increases. Microbial assays targeting Gram-positive and Gram-negative bacteria confirmed that the incorporation of a low number of cationic units into PHEMA provides antimicrobial character with a minimum inhibitory concentration (MIC) of 128 µg mL-1. Remarkably, copolymers with MTA molar fractions higher than 0.50 exhibited MIC values as low as 8 µg mL-1.

Exploiting Macromolecular Design To Optimize the Antibacterial Activity of Alkylated Cationic Oligomers

There is growing interest in synthetic polymers which co-opt the structural features of naturally occurring antimicrobial peptides. However, our understanding of how macromolecular architecture affects antibacterial activity remains limited. To address this, we investigated whether varying architectures of a series of block and statistical co-oligomers influenced antibacterial and hemolytic activity. Cu(0)-mediated polymerization was used to synthesize oligomers constituting 2-(Boc-amino)ethyl acrylate units and either diethylene glycol ethyl ether acrylate (DEGEEA) or poly(ethylene glycol) methyl ether acrylate units with varying macromolecular architecture; subsequent deprotection produced primary amine functional oligomers. Further guanylation provided an additional series of antimicrobial candidates. Both chemical composition and macromolecular architecture were shown to affect antimicrobial activity. A broad spectrum antibacterial oligomer (containing guanidine moieties and DEGEEA units) was identified that possessed promising activity (MIC = 2 μg mL^-1) toward both Gram-negative and Gram-positive bacteria. Bacterial membrane permeabilization was identified as an important contributor to the mechanism of action.

Antimicrobial Porous Surfaces Prepared by Breath Figures Approach

Herein, efficient antimicrobial porous surfaces were prepared by breath figures approach from polymer solutions containing low content of block copolymers with high positive charge density. In brief, those block copolymers, which were used as additives, are composed of a polystyrene segment and a large antimicrobial block bearing flexible side chain with 1,3-thiazolium and 1,2,3-triazolium groups, PS54-b-PTTBM-M44, PS54-b-PTTBM-B44, having different alkyl groups, methyl or butyl, respectively. The antimicrobial block copolymers were blended with commercial polystyrene in very low proportions, from 3 to 9 wt %, and solubilized in THF. From these solutions, ordered porous films functionalized with antimicrobial cationic copolymers were fabricated, and the influence of alkylating agent and the amount of copolymer in the blend was investigated. Narrow pore size distribution was obtained for all the samples with pore diameters between 5 and 11 µm. The size of the pore decreased as the hydrophilicity of the system increased; thus, either as the content of copolymer was augmented in the blend or as the copolymers were quaternized with methyl iodide. The resulting porous polystyrene surfaces functionalized with low content of antimicrobial copolymers exhibited remarkable antibacterial efficiencies against Gram positive bacteria Staphylococcus aureus, and Candida parapsilosis fungi as microbial models.

Is the aquatic toxicity of cationic polyelectrolytes predictable from selected physical properties?

Cationic acrylamide-based polyelectrolytes (cPAM) are widely used in industry. They can be designed for optimal performance in a specific application, but this opportunity means the environmental safety of all different alternatives needs to be addressed. Both the inclusion of environmental toxicity as a design variable and the establishment of relationships between structure and ecotoxicity are thus current challenges. The aim of this study was to assess whether structural variables such as molecular weight, charge density and the integrative intrinsic viscosity parameter can be used to predict the environmental safety of cPAMs, as well as if these relationships are stable when the biological models change. Five cPAMs comprising molecular weight and charge density gradients were tested against bacteria, microalgae, macrophytes and daphnids. While correlations were found between physical properties of cPAMs as expected, no clear ecotoxicity patterns could be identified. All cPAMs can be classified as harmful to aquatic life on the basis of the responses elicited in the most sensitive organisms, microalgae and daphnids. Unicellular bacteria were the least sensitive eco-receptors possibly due to cell wall structure or the protective effect of the ionic strength of the test medium. The macrophytes were also tolerant to cPAMs exposure, which may be related to exposure avoidance mechanisms. The order of toxicity of cPAMs depended on the test organism, preventing the establishment of stable structure-ecotoxicity relationships. Therefore, the study leads to the overall generalist recommendation of relying on the most sensitively responding test organisms when developing new (eco)safe-by-design cPAMs.

Tailoring Macromolecular Structure of Cationic Polymers towards Efficient Contact Active Antimicrobial Surfaces

The aim of this work is the preparation of contact active antimicrobial films by blending copolymers with quaternary ammonium salts and polyacrylonitrile as matrix material. A series of copolymers based on acrylonitrile and methacrylic monomers with quaternizable groups were designed with the purpose of investigating the influence of their chemical and structural characteristics on the antimicrobial activity of these surfaces. The biocide activity of these systems was studied against different microorganisms, such as the Gram-positive bacteria Staphylococcus aureus and the Gram-negative bacteria Pseudomona aeruginosa and the yeast Candida parapsilosis. The results confirmed that parameters such as flexibility and polarity of the antimicrobial polymers immobilized on the surfaces strongly affect the efficiency against microorganisms. In contrast to the behavior of copolymers in water solution, when they are tethered to the surface, the active cationic groups are less accessible and then, the mobility of the side chain is critical for a good contact with the microorganism. Blend films composed of copolymers with high positive charge density and chain mobility present up to a more than 99.999% killing efficiency against the studied microorganisms.

Single Continuous Near-Infrared Laser-Triggered Photodynamic and Photothermal Ablation of Antibiotic-Resistant Bacteria Using Effective Targeted Copper Sulfide Nanoclusters

The emergence of antibiotic-resistant bacterial strains has made conventional antibiotic therapies less efficient. The development of a novel nanoantibiotic approach for efficiently ablating such bacterial infections is becoming crucial. Herein, a collection of poly(5-(2-ethyl acrylate)-4-methylthiazole-g-butyl)/copper sulfide nanoclusters (PATA-C4@CuS) was synthesized for efficient capture and effective ablation of levofloxacin-resistant Gram-negative and Gram-positive bacteria upon tissue-penetrable near-infrared (NIR) laser irradiation. In this work, we took advantage of the excellent photothermal and photodynamic properties of copper sulfide nanoparticles (CuSNPs) upon NIR laser irradiation and thiazole derivative as a membrane-targeting cationic ligand toward bacteria. The conjugated nanoclusters could anchor the bacteria to trigger the bacterial aggregation quickly and efficiently kill them. These conjugated nanoclusters could significantly inhibit levofloxacin-resistant Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, and Bacillus amyloliquefaciens at 5.5 μg/mL under NIR laser irradiation (980 nm, 1.5 W cm^-2, 5 min), which suggested that the heat and reactive oxygen species (ROS) generated from the irradiated CuSNPs attached to bacteria were effective in eliminating and preventing the regrowth of the bacteria. Importantly, the conjugated nanoclusters could promote healing in bacteria-infected rat wounds without nonspecific damage to normal tissue. These findings highlight the promise of the highly versatile multifunctional nanoantibiotics in bacterial infection.

Structure-Activity Relationship of Membrane-Targeting Cationic Ligands on a Silver Nanoparticle Surface in an Antibiotic-Resistant Antibacterial and Antibiofilm Activity Assay

To explore the structure-activity relationship of membrane-targeting cationic ligands on a silver nanoparticle surface in an antibiotic-resistant antibacterial and antibiofilm activity assay, a series of functionalized silver nanocomposites were synthesized. Tuning the structural configuration, molecular weight, and side-chain length of the cationic ligands on the nanoparticle surface provided silver nanocomposites with effective antibacterial activity against both antibiotic-resistant Gram-negative and Gram-positive bacteria, including bacterial biofilms. These silver nanocomposites did not trigger hemolytic activity. Significantly, the bacteria did not develop resistance to the obtained nanocomposites even after 30 generations. A study of the antibacterial mechanism confirmed that these nanocomposites could irreversibly disrupt the membrane structure of bacteria and effectively inhibit intracellular enzyme activity, ultimately leading to bacterial death. The silver nanocomposites (64 μg/mL) could eradicate 80% of an established antibiotic-resistant bacterial biofilm. The strong structure-activity relationship toward antibacterial and antibiofilm activity suggests that variations in the conformational property of the functional ligand could be valuable in the discovery of new nano-antibacterial agents for treating pathogenic bacterial infections.

Cationic Acrylate Oligomers Comprising Amino Acid Mimic Moieties Demonstrate Improved Antibacterial Killing Efficiency

Cu(0)-mediated polymerization was employed to synthesize a library of structurally varied cationic polymers and their application as antibacterial peptide mimics was assessed. Eight platform polymers were first synthesized with low degrees of polymerization (DP) using (2-Boc-amino)ethyl acrylate as the monomer and either ethyl α-bromoisobutyrate or dodecyl 2-bromoisobutyrate as the initiator (thus providing hydrocarbon chain termini of C2 or C12, respectively). A two-step modification strategy was then employed to generate the final sixteen-member polymer library. Specifically, an initial deprotection was employed to reveal the primary amine cationic polymers, followed by guanylation. The biocidal activity of these cationic polymers was assessed against various strains of Escherichia coli, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa, Staphylococcus aureus, and Streptococcus pneumoniae. Polymers having a short segment of guanidine units and a C12 hydrophobic terminus were shown to provide the broadest antimicrobial activity against the panel of isolates studied, with MIC values approaching those for Gram-positive targeting antibacterial peptides: daptomycin and vancomycin. The C12-terminated guanidine functional polymers were assayed against human red blood cells, and a concomitant increase in haemolysis was observed with decreasing DP. Cytotoxicity was tested against HEK293 and HepG2 cells, with the lowest DP C12-terminated polymer exhibiting minimal toxicity over the concentrations examined, except at the highest concentration. Membrane disruption was identified as the most probable mechanism of bacteria cell killing, as elucidated by membrane permeability testing against E. coli.

Medicinal attributes of 1,2,3-triazoles: Current developments

1,2,3-Triazoles are important five-membered heterocyclic scaffold due to their extensive biological activities. This framework can be readily obtained in good to excellent yields on the multigram scale through click chemistry via reaction of aryl/alkyl halides, alkynes and NaN₃ under ambient conditions. It has been an emerging area of interest for many researchers throughout the globe owing to its immense pharmacological scope. The present work aims to summarize the current approaches adopted for the synthesis of the 1,2,3-triazole and medicinal significance of these architectures as a lead structure for the discovery of drug molecules such as COX-1/COX-2 inhibitors (celecoxib, pyrazofurin), HIV protease inhibitors, CB1 cannabinoid receptor antagonist and much more which are in the pipeline of clinical trials. The emphasis has been given on the major advancements in the medicinal prospectus of this pharmacophore for the period during 2008-2016.

Rapid bactericidal activity of an amphiphilic polyacrylate terpolymer system comprised of same-centered comonomers with 2-carbon and 6-carbon spacer arms and an uncharged repeat unit

Cationic amphiphilic polyacrylate terpolymers with rapid bactericidal activity against E. coli and S. aureus.

Cationic and dicationic 1,2,3-triazolium-based poly(ethylene glycol ionic liquid)s

We report the synthesis and in-depth characterization of two novel poly(ionic liquid)s having poly(ethylene glycol) main chains and side chains having either one or two 1,2,3-triazolium cations with triethylene glycol spacers and bis(trifluoromethylsulfonyl)imide counter anion(s).

1,2,3-Triazolium-based linear ionic polyurethanes

We report the synthesis and detailed characterization of a series of ionic polyurethanes issued from the polyaddition of a 1,2,3-triazolium-functionalized diol monomer having a bis(trifluoromethylsulfonyl)imide counter-anion with four aliphatic, cycloaliphatic or aromatic commercial diisocyanates.

Cationic peptidopolysaccharides synthesized by ‘click’ chemistry with enhanced broad-spectrum antimicrobial activities

A series of broad-spectrum antimicrobial cationic peptidopolysaccharides have been synthesized using a facile thiol–ene ‘click’ chemistry.