Nitroxide radical polymers for emerging plastic energy storage and organic electronics: fundamentals, materials, and applications

Increasing demand for portable and flexible electronic devices requires seamless integration of the energy storage system with other electronic components. This ever-growing area has urged on the rapid development of new electroactive materials that not only possess excellent electrochemical properties but hold capabilities to be fabricated to desired shapes. Ideally, these new materials should have minimal impact on the environment at the end of their life. Nitroxide radical polymers (NRPs) with their remarkable electrochemical and physical properties stand out from diverse organic redox systems and have attracted tremendous attention for their identified applications in plastic energy storage and organic devices. In this review, we present a comprehensive summary of NRPs with respect to the fundamental electrochemical properties, design principles and fabrication methods for different types of energy storage systems and organic electronic devices. While highlighting some exciting progress on charge transfer theory and emerging applications, we end up with a discussion on the challenges and opportunities regarding the future directions of this field.

Solution-Processable Thermally Crosslinked Organic Radical Polymer Battery Cathodes

Organic radical polymers are promising cathode materials for next-generation batteries because of their rapid charge transfer and high cycling stability. However, these organic polymer electrodes gradually dissolve in the electrolyte, resulting in capacity fade. Several crosslinking methods have been developed to improve the performance of these electrodes, but they are either not compatible with carbon additives or compromise the solution processability of the electrodes. A one-step post-synthetic, carbon-compatible crosslinking method was developed to effectively crosslink an organic polymer electrode and allow for easy solution processing. The highest electrode capacity of 104 mAh g^-1 (vs. a theoretical capacity of 111 mAh g^-1 ) is achieved by introducing 1 mol % of the crosslinker, whereas the highest capacity retention (99.6 %) is obtained with 3 mol % crosslinker. In addition, mass transfer was observed in situ by using electrochemical quartz crystal microbalance with dissipation monitoring. These results may guide future electrode design toward fast-charging and high-capacity organic electrodes.

A Methoxyamine-Protecting Group for Organic Radical Battery Materials-An Alternative Approach

An alternative synthetic route towards the widely employed electroactive poly(TEMPO methacrylate) (PTMA) via a thermally robust methoxyamine-protecting group is demonstrated herein. Protection of the radical moiety of hydroxy-TEMPO with a methyl functionality and subsequent esterification with methacrylic anhydride allows the high-yielding formation of the novel monomer methyl-TEMPO methacrylate (MTMA). The polymerization of MTMA to poly(MTMA) (PMTMA) is investigated via free radical polymerization and reversible addition-fragmentation chain-transfer polymerization (RAFT), a reversible-deactivation radical polymerization technique. Cleavage of the temperature-stable methoxyamine functionality by oxidative treatment of PMTMA with meta-chloroperbenzoic acid (mCPBA) releases the electroactive PTMA. The redox activity of PTMA was confirmed by cyclic voltammetry in lithium-ion coin cells.

100th Anniversary of Macromolecular Science Viewpoint: Fundamentals for the Future of Macromolecular Nitroxide Radicals

Macromolecular radicals, radical polymers, and polyradicals bear unique functionalities derived from their pendant radical groups. The increasing need for organic functional materials is driving the growth in research interest in macromolecular radicals for batteries, electronics, memory, and imaging. This Viewpoint summarizes the current state-of-knowledge regarding the macromolecular nitroxide radicals' redox mechanism, conductivity, chain conformation, controlled polymerization, network structure, conjugated forms, and applications. The nitroxide radical group is the focus because it is the most widely studied. Although most literature focuses upon applications, an emerging body of work is highlighting the fundamental physicochemical properties of macromolecular radicals. To this end, this Viewpoint recommends areas of opportunity in fundamental studies and best practices in reporting.

Ion-Conducting Redox-Active Polymer Gels Based on Stable Nitroxide Radicals

Redox-active polymer networks based on stable nitroxide radicals are a very promising class of materials to be used in the so-called organic radical batteries. In order to obtain fast-charging and high power electrodes, however, excellent ionic conductivity inside the electrode material is required to allow easy diffusion of ions and fast redox reactions. In this contribution, we investigated redox-active poly(2,2,6,6-tetramethylpiperidinyloxy-4-yl methacrylate) chains cross-linked through ionic liquid-like 1,2,3-triazolium groups. Different networks were prepared in which the amount of cross-linker and the counter-anion associated to the 1,2,3-triazolium group were varied. The ionic conductivities of the different polymer networks were first measured in the solid state by electrochemical impedance spectroscopy at different temperatures, and an increased ionic conductivity was measured when 1,2,3-triazolium groups were present in the network. The effects of the chemical nature of the counterions associated to the 1,2,3-triazolium groups and of the crosslinking density were then studied. The best ionic conductivities were obtained when bis (trifluoromethane)sulfonamide (TFSI) counter-anions were used, and when the crosslinking density of the TFSI-containing gel was higher. Finally, those ion-conducting gels were loaded with free LiTFSI and the transference number of lithium ions was accordingly measured. The good ionic conductivities and lithium ions transference numbers measured for the investigated redox-active gels make them ideal candidates for application as electrode materials for either organic radical batteries or pseudo-capacitors energy storage devices.

Diblock copolymers consisting of a redox polymer block based on a stable radical linked to an electrically conducting polymer block as cathode materials for organic radical batteries

Coupling a conjugated P3HT block to a radical polymer block leads to improved PTMA battery performances.

Polymerization of acrylates based on n-type organic semiconductors using Cu(0)-RDRP

Three acrylic monomers have been prepared based on organic semiconductor motifs commonly used as n-type materials in organic light-emitting diodes (OLEDs) and organic thin-film transistors (OTFTs) and polymerized by Cu(0)-RDRP.

Nitroxide radical polymers – a versatile material class for high-tech applications

A comprehensive summary of synthetic strategies for the preparation of nitroxide radical polymer materials and a state-of-the-art perspective on their latest and most exciting applications.

Cu(0)-RDRP of acrylates based on p-type organic semiconductors

A series of four acrylic monomers were synthesized based on p-type organic semiconductor motifs found commonly in organic light-emitting diodes (OLEDs), organic thin-film transistors (OTFTs) and organic photovoltaics (OPVs).

The impact of the molecular weight on the electrochemical properties of poly(TEMPO methacrylate)

This work reports the synthesis of high molecular weight poly(TEMPO methacrylate) and the molecular weight influence on electrochemical properties.

Electroactive polymer/carbon nanotube hybrid materials for energy storage synthesized via a “grafting to” approach

Poly(2,2,6,6-tetramethylpiperidin-1-oxyl-4-yl methacrylate) has been grafted onto multi-walled carbon nanotubes to obtain conducting organic cathodes for Li-ion batteries.

One-pot synthesis of electro-active polymer gels via Cu(0)-mediated radical polymerization and click chemistry

Electro-active polymer gels are prepared via one-pot Cu(0)-mediated radical polymerization and click chemistry.

Stable organic radical polymers: synthesis and applications

We present an overview of the synthetic strategies and methodologies for stable organic radical polymers, and summarise their applications in diverse areas.

Redox-controlled upper critical solution temperature behaviour of a nitroxide containing polymer in alcohol–water mixtures

Research on stimuli responsive polymers builds momentum as nature-inspired applications using man-made materials are increasingly sought.

Cu(0)-mediated living radical polymerisation in dimethyl lactamide (DML); an unusual green solvent with limited environmental impact

The synthesis of poly-acrylates, methacrylates and styrene derivatives by SET-LRP is reported in a user and environmentally friendly “green” solvent, dimethyl lactamide (DML).