Designing Tough Hydrogel Shells for Glucose Sensing

Conventional hydrogel microcapsules often suffer from inadequate mechanical stability, hindering their use. Here, water-cored double-network (DN) hydrogel shells are designed, formed by polyacrylamide and calcium alginate networks using triple-emulsion templates. These DN hydrogel shells offer robust mechanical stability, optical transparency, and a precisely-defined cut-off threshold. The feasibility of this platform is demonstrated through the development of a fluorometric glucose sensor. Glucose oxidase is enclosed within the water core, while a pH-responsive fluorescent dye is incorporated into the DN shells. Glucose diffuses into the core through the DN shells, where the glucose oxidase converts glucose into gluconic acid, leading to pH reduction and a subsequent decrease in fluorescence intensity of DN shells. Additionally, the pH-sensitive colorant dissolved in the medium enables visual pH assessment. Thus, glucose levels can be determined using both fluorometric and colorimetric methods. Notably, the DN shells exhibit exceptional stability, enduring intense mechanical stress and cycles of drying and rehydration without leakage. Moreover, the DN shells act as effective barriers, safeguarding glucose oxidase against proteolysis by large disruptive proteins, like pancreatin. This versatile DN shell platform extends beyond glucose oxidase encapsulation, serving as a foundation for various capsule sensors utilizing enzymes and heterogeneous catalysts.

Recent advances in glucose-oxidase-based nanocomposites for diabetes diagnosis and treatment

Glucose oxidase (GOx) has attracted a lot of attention in the field of diabetes diagnosis and treatment in recent years owing to its inherent biocompatibility and glucose-specific catalysis. GOx can effectively catalyze the oxidation of glucose in the blood to hydrogen peroxide (H2O2) and glucuronic acid and can be used as a sensitive element in biosensors to detect blood glucose concentrations. Nanomaterials based on the immobilization of GOx can significantly improve the performance of glucose sensors through, for example, reduced electron tunneling distance. Moreover, various insulin-loaded nanomaterials (e.g., metal-organic backbones, and mesoporous silica nanoparticles) have been developed for the control of blood glucose concentrations based on GOx catalytic chemistry. These nano-delivery carriers are capable of releasing insulin in response to GOx-mediated changes in the microenvironment, allowing for a rapid return of the blood microenvironment to a normal state. Therefore, glucose biosensors and insulin delivery vehicles immobilized with GOx are important tools for the diagnosis and treatment of diabetes. This paper reviews the characteristics of various GOx-based nanomaterials developed for glucose biosensing and insulin-responsive release as well as research progress, and also highlights the current challenges and opportunities facing this field.

Glucose Sensor Using Sol-Gel Coating Layer Deposited on PMMA Optical Fiber: An Enzyme Activity Measurement System

In the present work, a biocatalytic glucose optical sensor produced by immobilizing glucose oxidase (GOD) as a recognition molecule over a PMMA (polymethylmethacrylate) optical fiber is introduced. An enzymatic encapsulation process was carried out using the sol-gel method, depositing a TEOS-based coating by immersion at the end of an optical fiber; the biosensor was characterized using different glucose levels. Finally, the best way to encapsulate the enzyme and prevent it from degrading is to perform the process at room temperature, and later implement the deposition of the coating on the fiber. The drying process was optimal below 8 °C.

Difunctional Hydrogel Optical Fiber Fluorescence Sensor for Continuous and Simultaneous Monitoring of Glucose and pH

It is significant for people with diabetes to know their body's real-time glucose level, which can guide the diagnosis and treatment. Therefore, it is necessary to research continuous glucose monitoring (CGM) as it gives us real-time information about our health condition and its dynamic changes. Here, we report a novel hydrogel optical fiber fluorescence sensor segmentally functionalized with fluorescein derivative and CdTe QDs/3-APBA, which can continuously monitor pH and glucose simultaneously. In the glucose detection section, the complexation of PBA and glucose will expand the local hydrogel and decrease the fluorescence of the quantum dots. The fluorescence can be transmitted to the detector by the hydrogel optical fiber in real time. As the complexation reaction and the swelling-deswelling of the hydrogel are all reversible, the dynamic change of glucose concentration can be monitored. For pH detection, the fluorescein attached to another segment of the hydrogel exhibits different protolytic forms when pH changes and the fluorescence changes correspondingly. The significance of pH detection is compensation for pH errors in glucose detection because the reaction between PBA and glucose is sensitive to pH. The emission peaks of the two detection units are 517 nm and 594 nm, respectively, so there is no signal interference between them. The sensor can continuously monitor glucose in 0-20 mM and pH in 5.4-7.8. The advantages of this sensor are multi-parameter simultaneous detection, transmission-detection integration, real-time dynamic detection, and good biocompatibility.

Cross-Linked Luminescent Polymers Based on β-Diketone-Modified Polysiloxanes and Organoeuropiumsiloxanes

Nowadays, luminescent materials attract wide attention due to their valuable characteristics and broad area of potential application. Luminescent silicone-based polymers possess unique properties, such as flexibility, hydrophobicity, thermal and chemical stabilities, etc., which allow them to be utilized in various fields, such as optoelectronics, solid-state lasers, luminescent solar concentrators, sensors, and others. In the present work, a metal-ligand interaction approach was applied to obtain new cross-linked luminescent polymers based on multiligand polysiloxanes with grafted β-diketone fragments and organoeuropiumsiloxanes containing various organic substituents. Organoeuropiumsiloxanes were utilized as a source of Eu³⁺ ions due to their compatibility with the silicon matrix. All synthesized polymers were fully characterized and their physicochemical, mechanical, self-healing, optical, and thermal properties were studied.

Nucleic acid analysis on paper substrates (NAAPs): an innovative tool for Point of Care (POC) infectious disease diagnosis

The cost-effective rapid diagnosis of infectious diseases is an essential and important factor for curing such diseases in the global public health care picture. Owing to poor infrastructure and lack of sanitation, these diseases have an extreme impact on remote and rural areas, especially in developing countries, and there are unresolved challenges. Molecular diagnosis, such as nucleic acid analysis, plays a key role in the significant treatment of numerous infectious diseases. Current molecular diagnostic assays require a sophisticated laboratory setup with expensive components. Molecular diagnosis on a microfluidic point-of-care (POC) platform is attractive to researchers for disease detection with proper prevention. Compared to various microfluidic substrate materials, paper-based POC technologies offer significant cost-effective solutions over high-cost clinical instruments to fill the gap between the needs of users and affordability. Low-cost paper-based microfluidic POC technologies provide portable and disposable diagnostic systems for multiple disease detection that may be extremely useful in remote areas. This article presents a critical review of paper-based microfluidic device technology which has become an imminent platform to adjust the current health scenario for the detection of diseases using different stages of nucleic acid analysis, such as extraction, amplification and detection of nucleic acid, with future perspectives for paper substrates.

Molecular Boronic Acid-Based Saccharide Sensors

Boronic acids can reversibly bind diols, a molecular feature that is ubiquitous within saccharides, leading to their use in the design and implementation of sensors for numerous saccharide species. There is a growing understanding of the importance of saccharides in many biological processes and systems; while saccharide or carbohydrate sensing in medicine is most often associated with detection of glucose in diabetes patients, saccharides have proven to be relevant in a range of disease states. Herein the relevance of carbohydrate sensing for biomedical applications is explored, and this review seeks to outline how the complexity of saccharides presents a challenge for the development of selective sensors and describes efforts that have been made to understand the underpinning fluorescence and binding mechanisms of these systems, before outlining examples of how researchers have used this knowledge to develop ever more selective receptors.

Honey-inspired antimicrobial hydrogels resist bacterial colonization through twin synergistic mechanisms

Inspired by the interesting natural antimicrobial properties of honey, biohybrid composite materials containing a low-fouling polymer hydrogel network and an encapsulated antimicrobial peroxide-producing enzyme have been developed. These synergistically combine both passive and active mechanisms for reducing microbial bacterial colonization. The mechanical properties of these materials were assessed using compressive mechanical analysis, which revealed these hydrogels possessed tunable mechanical properties with Young's moduli ranging from 5 to 500 kPa. The long-term enzymatic activities of these materials were also assessed over a 1-month period using colorimetric assays. Finally, the passive low-fouling properties and active antimicrobial activity against a leading opportunistic pathogen, Staphylococcus epidermidis, were confirmed using bacterial cell counting and bacterial adhesion assays. This study resulted in non-adhesive substrate-permeable antimicrobial materials, which could reduce the viability of planktonic bacteria by greater than 7 logs. It is envisaged these new biohybrid materials will be important for reducing bacterial adherence in a range of industrial applications.

A capillary-based fluorimetric platform for the evaluation of glucose in blood using gold nanoclusters and glucose oxidase in the ZIF-8 matrix

A capillary-based fluorimetric analysis method was developed for probing glucose (Glu) in blood using Glu oxidase-anchored gold nanoclusters (GOD-AuNCs) and the ZIF-8 matrix. AuNCs were attached with GOD to be further encapsulated into the ZIF-8 matrix through the protein-mediated formation route. The resulting GOD-AuNCs@ZIF-8 nanocomposites could present the AuNC-improved catalysis of GOD and ZIF-8-improved environmental stability. The ZIF-8-enhanced fluorescence intensity of AuNCs could also be expected. Moreover, a capillary-based fluorometric platform was constructed for sensing Glu by coating the capillaries first with GOD-AuNCs and then the ZIF-8 matrix. Herein, Glu was introduced through the self-driven sampling to trigger the GOD-catalyzed production of hydrogen peroxide, which could induce the fluorescence quenching rationally depending on the Glu concentrations. The developed fluorimetric method could allow for the rapid and simple detection of Glu with the concentrations linearly ranging from 5.0 μM to 2.5 mM. Besides, the feasibility of practical applications was demonstrated by the evaluation of Glu in blood showing the recoveries of 96.2%-103.4%. Importantly, the proposed design of the capillary-based fluorimetric platform by the synergetic combination of catalysis-specific recognition and fluorescence signaling may open a new door toward extensive applications in the biological sensing, catalysis, and imaging fields.

Impedance spectroscopy for monosaccharides detection using responsive hydrogel modified paper-based electrodes

Novel paper-based impedance sensor for saccharide sensing in the sub-mM range.

Synthesis of a glucose oxidase-conjugated, polyacrylamide-based, fluorescent hydrogel for a reusable, ratiometric glucose sensor

New emission color-changeable hydrogels containing glucose oxidase were synthesized to be used in glucose sensing.