Amplified Assembly of G-Quadruplex-Decorated DNA Network Nanostructure toward AIE Signaling-Based Sensitive Biosensing

Aggregation-induced emission (AIE) has offered a promising approach for developing low-background fluorescent methods; however, its applications often suffer from complex probe synthesis and poor biocompatibility. Herein, a novel AIE biosensing method for kanamycin antibiotic assays was developed by utilizing a DNA network nanostructure assembled from an aptamer recognition reaction to capture a large number of tetraphenylethylene fluorogen-labeled signal DNA (DTPE) probes. Due to the excellent hydrophilicity of the oligonucleotides, DTPE exhibited excellent water solubility without obvious background signal emission. Based on an ingenious nucleotide design, an abundance of G-quadruplex blocks neighboring the captured DTPE were formed on the DNA nanostructure. Because of the greatly restricted free motion of DTPE by this unique nanostructure, a strong AIE fluorescence signal response was produced to construct the signal transduction strategy. Together with target recycling and rolling circle amplification-based cascade nucleic acid amplification, this method exhibited a wide linear range from 75 fg mL-1 to 1 ng mL-1 and a detection limit down to 24 fg mL-1. The excellent analytical performance and effective manipulation improvement of the method over previous approaches determine its promising potential for various applications.

Novel Anthracene and Carbazole Based Aggregation Induced Enhanced Emission Active Schiff Base as a Selective Sensor for Cu2+ ions

In present work our group has synthesized two novel Schiff-bases, Di-Carbazole based Schiff-base (DB-1) and Di-Anthracene based Schiff-base (DB-2) using condensation reaction and characterized thorough different spectroscopic techniques such as mass spectrometry, IR spectroscopy, 1H and 13C NMR spectroscopy. Furthermore, the AIE(Aggregation induced emission) studies were done using water-THF mixture. As compared to pure THF, the DB-2 showed a 17.8-fold increase in fluorescence intensity with a bathochromic shift of 64 nm in 80% water: THF mixture. For DB-1increase was seen at 70% water-THF combination. The analysis of the dynamic light scattering (DLS) further supported this excellent AIEE (Aggregation induced enhanced emission) characteristic. Furthermore, the spectrofluorometric techniques were used to examine the capacity of both Schiff bases to detect the heavy metals. It was discovered that only DB-1, with a detection limit of 2.4 × 10-8 M, was selective for the Cu2+ ion, whereas DB-2 had no sensing capability for metal ions. The Job's plot was used to determine the stoichiometry ratio of the DB-1 with Cu2+ to further examine the process. It was discovered that the ratio was 1:1 (DB-1:Cu2+). Additionally, the association constant of DB-1 for Cu2+ was 5.1 × 1011 M-1, demonstrating the excellent binding affinity of DB-1 for the Cu2+ ion.

Amplified detection of SARS-COV-2 B.1.1.529 (Omicron) gene oligonucleotides based on exonuclease III-aided MoS2 /AIE nanoprobes

The coronavirus disease-2019 pandemic reflects the underdevelopment of point-of-care diagnostic technology. Nuclei acid (NA) detection is the "gold standard" method for the early diagnosis of the B.1.1.529 (Omicron) variant of severe acute respiratory syndrome-coronavirus disease-2. Polymerase chain reaction is the main method for NA detection but requires considerable manpower and sample processing taking ≥ 3 h. To simplify the operation processes and reduce the detection time, exonuclease III (Exo III)-aided MoS2 /AIE nanoprobes were developed for rapid and sensitive detection of the oligonucleotides of Omicron. Molybdenum disulfide (MoS2 ) nanosheets with excellent optical absorbance and distinguishable affinity to single-strand and duplex DNAs were applied as quenchers, and aggregation-induced emission (AIE) molecules with high luminous efficiency were designed as donor in fluorescence resonance energy transfer-based nanoprobes. Exo III with catalytic capability was used for signal amplification to increase the sensitivity of detection. The composite nanoprobes detected the mutated nucleocapsid (N)-gene and spike (S)-gene oligonucleotides of Omicron within 40 min with a limit of detection of 4.7 pM, and showed great potential for application in community medicine.

A dual “turn-on” biosensor based on AIE effect and FRET for in situ detection of miR-125b biomarker in early Alzheimer's disease

MicroRNA-125b (miR-125b) is highly associated with synaptic dysfunction and tau hyperphosphorylation in the early pathogenesis of Alzheimer's disease (AD), making it a promising biomarker for early AD diagnosis. Hence, there is an urgent need for a reliable sensing platform to assist in situ miR-125b detection. In this work, we report a dual "turn-on" fluorescence biosensor based on the nanocomposite of aggregation-induced emission fluorogen (AIEgen)-labeled oligonucleotide (TPET-DNA) probes immobilized on the surface of cationic dextran modified molybdenum disulfide (TPET-DNA@Dex-MoS₂). In the presence of the target, TEPT-DNA can hybridize with miR-125b to form a DNA/RNA duplex, causing TPET-DNA to detach from the surface of Dex-MoS₂ that simultaneously activates the dual fluorescence enhancement processes: (1) recovery of TPET-DNA signal and (2) strong fluorescent emission from AIEgen triggered by restriction of the intramolecular rotation. The sensing performance of TPET-DNA@Dex-MoS₂ was demonstrated by detecting miR-125b in vitro with good sensitivity at the picomolar level and rapid response (≤1 h) without amplification procedures. Furthermore, our nanoprobes exhibited excellent imaging capabilities to aid real-time monitoring of the endogenous miR-125b in PC12 cells and brain tissues of mice AD model induced by local administration of okadaic acid (OA). The fluorescence signals of the nanoprobes indicated miR-125b was spatially associated with phosphorylated tau protein (p-tau) in vitro and in vivo. Therefore, TPET-DNA@Dex-MoS₂ could be a promising tool for in situ and real-time monitoring of the AD-related microRNAs and also provide mechanistic insight into the early prognosis of AD.

A Target-Triggered Emission Enhancement Strategy Based on a Y-Shaped DNA Fluorescent Nanoprobe with Aggregation-Induced Emission Characteristic for microRNA Imaging in Living Cells

DNA self-assembled fluorescent nanoprobes have been developed for bio-imaging owing to their high resistance to enzyme degradation and great cellular uptake capacity. In this work, we designed a new Y-shaped DNA fluorescent nanoprobe (YFNP) with aggregation-induced emission (AIE) characteristic for microRNA imaging in living cells. With the modification of the AIE dye, the constructed YFNP had a relatively low background fluorescence. However, the YFNP could emit a strong fluorescence due to the generation of microRNA-triggered AIE effect in the presence of target microRNA. Based on the proposed target-triggered emission enhancement strategy, microRNA-21 was detected sensitively and specifically with a detection limit of 122.8 pM. The designed YFNP showed higher bio-stability and cell uptake than the single-stranded DNA fluorescent probe, which has been successfully applied for microRNA imaging in living cells. More importantly, the microRNA-triggered dendrimer structure could be formed after the recognition of target microRNA, achieving a reliable microRNA imaging with a high spatiotemporal resolution. We expect that the proposed YFNP will become a promising candidate for bio-sensing and bio-imaging.

An AIEgen/graphene oxide nanocomposite (AIEgen@GO)-based two-stage "turn-on" nucleic acid biosensor for rapid detection of SARS-CoV-2 viral sequence

The ongoing outbreak of Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) pandemic has posed significant challenges in early viral diagnosis. Hence, it is urgently desirable to develop a rapid, inexpensive, and sensitive method to aid point-of-care SARS-CoV-2 detection. In this work, we report a highly sequence-specific biosensor based on nanocomposites with aggregation-induced emission luminogens (AIEgen)-labeled oligonucleotide probes on graphene oxide nanosheets (AIEgen@GO) for one step-detection of SARS-CoV-2-specific nucleic acid sequences (Orf1ab or N genes). A dual "turn-on" mechanism based on AIEgen@GO was established for viral nucleic acids detection. Here, the first-stage fluorescence recovery was due to dissociation of the AIEgen from GO surface in the presence of target viral nucleic acid, and the second-stage enhancement of AIE-based fluorescent signal was due to the formation of a nucleic acid duplex to restrict the intramolecular rotation of the AIEgen. Furthermore, the feasibility of our platform for diagnostic application was demonstrated by detecting SARS-CoV-2 virus plasmids containing both Orf1ab and N genes with rapid detection around 1 h and good sensitivity at pM level without amplification. Our platform shows great promise in assisting the initial rapid detection of the SARS-CoV-2 nucleic acid sequence before utilizing quantitative reverse transcription-polymerase chain reaction for second confirmation.

Aggregation induced emission molecules for detection of nucleic acids

Aggregation-induced emission (AIE) is an ingenious concept in the field of luminescent molecules. AIE is the energy released in an excited state that in turn is converted into light irrespective of being in either liquid phase or solid phase. Aggregation or crystallization of AIE molecules impedes the free movement of molecules and it resultantly becomes highly fluorescent. It is currently being used for several applications including sensing, diagnostic, protein, DNA or RNA detection, cells and cell organelles imaging. AIEs are highly sensitive and specific for binding with target molecules. In this chapter, we underline different AIE molecules for detection of nucleic acids.

DNA Condensation Triggered by the Synergistic Self-Assembly of Tetraphenylethylene-Viologen Aggregates and CT-DNA

Development of small organic chromophores as DNA condensing agents, which explore supramolecular interactions and absorbance or fluorescence-based tracking of condensation and gene delivery processes, is in the initial stages. Herein, we report the synthesis and electrostatic/groove binding interaction-directed synergistic self-assembly of the aggregates of two viologen-functionalized tetraphenylethylene (TPE-V) molecules with CT-DNA and subsequent concentration-dependent DNA condensation process. TPE-V molecules differ in their chemical structure according to the number of viologen units. Photophysical and morphological studies have revealed the interaction of the aggregates of TPE-V in Tris buffer with CT-DNA, which transforms the fibrous network structure of CT-DNA to partially condensed beads-on-a-string-like arrangement with TPE-V aggregates as beads via electrostatic and groove binding interactions. Upon further increasing the concentration of TPE-V, the "beads-on-a-string"-type assembly of TPE-V/CT-DNA complex changes to completely condensed compact structures with 40-50 nm in diameter through the effective charge neutralization process. Enhancement in the melting temperature of CT-DNA, quenching of the fluorescence emission of ethidium bromide/CT-DNA complex, and the formation of induced CD signal in the presence of TPE-V molecules support the observed morphological changes and thereby verify the DNA condensation abilities of TPE-V molecules. Decrease in the hydrodynamic size, increase in the zeta potential value with the addition of TPE-V molecules to CT-DNA, failure of TPE-V/cucurbit(8)uril complex to condense CT-DNA, and the enhanced DNA condensation ability of TPE-V2 with two viologen units compared to TPE-V1 with a single viologen unit confirm the importance of positively charged viologen units in the DNA condensation process. Initial cytotoxicity analysis on A549 cancer and WI-38 normal cells revealed that these DNA condensing agents are non-toxic in nature and hence could be utilized in further cellular delivery studies.

Hydrophobic Interaction: A Promising Driving Force for the Biomedical Applications of Nucleic Acids

The comprehensive understanding and proper use of supramolecular interactions have become critical for the development of functional materials, and so is the biomedical application of nucleic acids (NAs). Relatively rare attention has been paid to hydrophobic interaction compared with hydrogen bonding and electrostatic interaction of NAs. However, hydrophobic interaction shows some unique properties, such as high tunability for application interest, minimal effect on NA functionality, and sensitivity to external stimuli. Therefore, the widespread use of hydrophobic interaction has promoted the evolution of NA-based biomaterials in higher-order self-assembly, drug/gene-delivery systems, and stimuli-responsive systems. Herein, the recent progress of NA-based biomaterials whose fabrications or properties are highly determined by hydrophobic interactions is summarized. 1) The hydrophobic interaction of NA itself comes from the accumulation of base-stacking forces, by which the NAs with certain base compositions and chain lengths show properties similar to thermal-responsive polymers. 2) In conjugation with hydrophobic molecules, NA amphiphiles show interesting self-assembly structures with unique properties in many new biosensing and therapeutic strategies. 3) The working-mechanisms of some NA-based complex materials are also dependent on hydrophobic interactions. Moreover, in recent attempts, NA amphiphiles have been applied in organizing macroscopic self-assembly of DNA origami and controlling the cell-cell interactions.

AIEgens/Nucleic Acid Nanostructures for Bioanalytical Applications

DNA occupies significant roles in life processes, which include encoding the sequences of proteins and accurately transferring genetic information from generation to generation. Recent discoveries have demonstrated that a variety of biological functions are correlated with DNA's conformational transitions. The non-B form has attained great attention among the diverse forms of DNA over the past several years. The main reason for this is that a large number of studies have shown that the non-B form of DNA is associated with gross deletions, inversions, duplications, translocations as well as simple repeating sequences, which therefore causes human diseases. Consequently, the conformational transition of DNA between the B-form and the non-B form is important for biology. Conventional fluorescence probes based on the conformational transitions of DNA usually need a fluorophore and a quencher group, which suffers from the complex design of the structure and tedious synthetic procedures. Moreover, conventional fluorescence probes are subject to the aggregation-caused quenching (ACQ) effect, which limits their application toward imaging and analyte detection. Fluorogens exhibiting aggregation-induced emission (AIE) have attracted tremendous attention over the past decade. By taking advantage of this unique behavior, plenty of fluorescent switch-on probes without the incorporation of fluorescent quenchers/fluorophore pairs have been widely developed as biosensors for imaging a variety of analytes. Herein, the recent progress in bioanalytical applications on the basis of aggregation-induced emission luminogens (AIEgens)/nucleic acid nanostructures are presented and discussed.

Construction of Thermo-Responsive Elastin-Like Polypeptides (ELPs)-Aggregation-Induced-Emission (AIE) Conjugates for Temperature Sensing

In this work, an aggregation-induced emission (AIE) molecule (tetraphenylethene derivative, TPE-COOH) was conjugated to elastin-like polypeptides (ELPs40) via an amide bond to form ELPs40-TPE. The successful synthesis of ELPs40-TPE was confirmed by Circular Dichroism spectroscopy, gel electrophoresis, UV-vis absorption, and fluorescence emission spectroscopy. ELPs40-TPE possessed both amphiphilicity and the features of an AIE, and the fluorescence intensity was dependent on the local temperature. The Hela cells imaging indicated that ELPs40-TPE has great potential for bio-imaging applications because of its advantages of high fluorescence intensity, good water-solubility, and remarkable biocompatibility.

Progress and Trends in AIE-Based Bioprobes: A Brief Overview

Luminescent bioprobes are powerful analytical means for biosensing and optical imaging. Luminogens featured with aggregation-induced emission (AIE) attributes have emerged as ideal building blocks for high-performance bioprobes. Bioprobes constructed with AIE luminogens have been identified to be a novel class of FL light-up probing tools. In contrast to conventional bioprobes based on the luminophores with aggregation-caused quenching (ACQ) effect, the AIE-based bioprobes enjoy diverse superiorities, such as lower background, higher signal-to-noise ratio and sensitivity, better accuracy, and more outstanding resistance to photobleaching. AIE-based bioprobes have been tailored for a vast variety of purposes ranging from biospecies sensing to bioimaging to theranostics (i.e., image-guided therapies). In this review, recent five years' advances in AIE-based bioprobes are briefly overviewed in a perspective distinct from other reviews, focusing on the most appealing trends and progresses in this flourishing research field. There are altogether 11 trends outlined, which have been classified into four aspects: the probe composition and form (bioconjugtes, nanoprobes), the output signal of probe (far-red/near-infrared luminescence, two/three-photon excited fluorescence, phosphorescence), the modality and functionality of probing system (dual-modality, dual/multifunctionality), the probing object and application outlet (specific organelles, cancer cells, bacteria, real samples). Typical examples of each trend are presented and specifically demonstrated. Some important prospects and challenges are pointed out as well in the hope of intriguing more interests from researchers working in diverse areas into this exciting research field.

DNA quadruplexes as molecular scaffolds for controlled assembly of fluorogens with aggregation-induced emission

Aggregation-induced emission (AIE) can be generated due to the restriction of intramolecular motions. The controllable assembly of fluorogens with AIE properties (AIEgens) is able to provide a new opportunity for precise manipulation of fluorescent signal transduction. Here, a tetrapod DNA quadruplex (TP-G4) was designed as a molecular scaffold for assembly and precise modulation of light emission of an oligonucleotide-grafted fluorogen with aggregation-induced emission (Oligo-AIEgen). The Oligo-AIEgen was synthesized by attaching the AIEgen to the 3'-terminus of the oligonucleotide through a dibenzylcyclooctyne mediated coupling reaction. The AIEgen emitted no detectable fluorescence in the context of a double-stranded structure. When hybridized to the parallel-stranded TP-G4, several AIEgens were located in close proximity to generate fluorescence. The fluorescence intensity has been precisely regulated by manipulation of the spacer length between the core structure of the scaffold and AIEgen, as well as by altering the quartet number of the G-quadruplex. Similar control of fluorescence was also demonstrated using tetramolecular and bimolecular i-motif quadruplex structures as the scaffolds. These scaffolds provide a proof of concept on the manipulation of molecular interactions, which forms a universal molecular tool for the design of new biosensing strategies.

Fluorescence probes based on AIE luminogen: application for sensing Hg2+ in aqueous media and cellular imaging

S1 and S2 could be applied for sensing Hg²⁺ in aqueous media and cellular imaging with remarkable AIEE.

Synthesis of novel AIEE active pyridopyrazines and their applications as chromogenic and fluorogenic probes for Hg2+ detection in aqueous media

A series of AIEE active novel pyridopyrazine derivatives showing selective and sensitive detection of Hg²⁺ in aqueous media is reported.

A pH responsive fluorescent probe based on dye modified i-motif nucleic acids

DNA-AIEgen hybrids show pH-responsive AIE effects induced by the conformational changes of DNA upon pH variation.

Thermo-responsive fluorescence of AIE-active poly(N-isopropylacrylamides) labeled with highly twisted bis(N,N-dialkylamino)arenes

A thermo-responsive fluorescent polymer materials were synthesized fromN-isopropylacrylamides with AIE-active 9,10-bis(N,N-dialkylamino)arene monomers.

Tunable Supramolecular Interactions of Aggregation-Induced Emission Probe and Graphene Oxide with Biomolecules: An Approach toward Ultrasensitive Label-Free and "Turn-On" DNA Sensing

Aggregation-induced emission (AIE) probes have shown great potential applications in fluorescent sensing of biomolecules, and the integration of AIE probe and graphene oxide (GO) attracts intense interest in developing new tools for label-free and "turn-on" fluorescent biomolecular analysis. Herein, an ultrasensitive label-free and "turn-on" DNA sensing is realized by tuning the supramolecular interactions of AIE probe and GO with DNA. The investigation of supramolecular interactions of AIE probes and GO with DNA demonstrate that AIE probe with short alkyl chains substitute shows highest binding affinity with DNA strand, and GO with low oxidation degree possesses strong binding interactions to ssDNA and the highest fluorescence quenching efficiency. As a result, the optimized AIE probes and GO-based fluorescent sensor can selectively detect the target DNA sequence and exhibits the detection limitation as low as 0.17 × 10^-9 m. It is believed that the research efforts will provide an efficient approach to improve the performance of DNA sensing assay and an indepth understanding of the supramolecular interactions of AIE probes and GO with DNA, and thus facilitate their extended applications in biosensors and biomedicine.

Accurate and visual discrimination of single-base mismatch by utilization of binary DNA probes in gold nanoparticles-based biosensing strategy

Herein we report a colorimetric biosensing strategy to discriminate single-nucleotide mutation in DNA with high selectivity using unmodified gold nanoparticles (AuNPs) as indicators. In the AuNPs-based colorimetric strategy, binary DNA probes were produced by splitting a long DNA probe in the middle for sensitive differentiation of single-base mismatch. The detection limit of this method toward target DNA was 5nM. The developed system has superior advantages of utilization of inexpensive materials, simplicity and visualization. Moreover, binary DNA probes not only can distinguish single-base mutation in the target DNA very well, as compared to long DNA probe, but also can construct "AND" logic gate using two distinct target DNAs as inputs, which holds great potential for increasing the accuracy of disease diagnosis in clinical applications.

Fluorescent nanoassemblies between tetraphenylethenes and sulfonatocalixarenes: a systematic study of calixarene-induced aggregation

We demonstrated a systematic study of calixarene-induced aggregation (CIA) that how and to what extent the structures of hosts and guests affect the assembly behavior by fluorescence spectroscopy.

Effect of alkyl groups on emission properties of aggregation induced emission active N-alkyl arylaminomaleimide dyes

Aggregation induced emission (AIE) active N-alkyl aminomaleimide dyes with various kinds of N-alkyl groups were synthesized in a one pot process.