Photocatalytic ethane conversion on rutile TiO2(110): identifying the role of the ethyl radical

Oxidative dehydrogenation of ethane (C2H6, ODHE) is a promising approach to producing ethene (C2H4) in the chemical industry. However, the ODHE needs to be operated at a high temperature, and realizing the ODHE under mild conditions is still a big challenge. Herein, using photocatalytic ODHE to obtain C2H4 has been achieved successfully on a model rutile(R)-TiO2(110) surface with high selectivity. Initially, the C2H6 reacts with hole trapped OTi- centers to produce ethyl radicals , which can be precisely detected by a sensitive TOF method, and then the majority of the radicals spontaneously dehydrogenate into C2H4 without another photo-generated hole. In addition, parts of the radicals rebound with diversified surface sites to produce C2 products via migration along the surface. The mechanistic model built in this work not only advances our knowledge of the C-H bond activation and low temperature C2H6 conversion, but also provides new opportunities for realizing the ODHE with high C2H4 efficiency under mild conditions.

Defect Engineering in Metal-Organic Frameworks Towards Advanced Mixed Matrix Membranes for Efficient Propylene/Propane Separation

Highly permselective and durable membrane materials have been sought for energy-efficient C₃ H₆ /C₃ H₈ separation. Mixed-matrix membranes (MMMs) comprising a polymer matrix and metal-organic frameworks (MOFs) are promising candidates for this application; however, rational matching of filler-matrix is challenging and their separation performances need to be further improved. Here, we propose a novel strategy of "defect engineering" in MOFs as an additional degree of freedom to design advanced MMMs. MMMs incorporated with defect-engineered MOFs exhibit exceptionally high C₃ H₆ permeability and maintained C₃ H₆ /C₃ H₈ selectivity, especially with enhanced stability under industrial mixed-gas conditions. The gas transport, sorption, and material characterizations reveal that the defect sites in MOFs provide the resulting MMMs with not only ultrafast diffusion pathways but also favorable C₃ H₆ sorption by forming complexation with unsaturated open metal sites, confirmed by in situ FT-IR studies. Most importantly, the concept is also valid for different polymer matrices and gas pairs, demonstrating its versatile potential in other fields.

Oxidative dehydrogenation of ethane: catalytic and mechanistic aspects and future trends

Ethane oxidative dehydrogenation (ODH) is an attractive, low energy, alternative route to reduce the carbon footprint for ethene production, however, the commercial implementation of ODH processes requires catalysts with improved selectivity.

A Bibliometric Survey of Paraffin/Olefin Separation Using Membranes

Bibliometric studies allow to collect, organize and process information that can be used to guide the development of research and innovation and to provide basis for decision-making. Paraffin/olefin separations constitute an important industrial issue because cryogenic separation methods are frequently needed in industrial sites and are very expensive. As a consequence, the use of membrane separation processes has been extensively encouraged and has become an attractive alternative for commercial separation processes, as this may lead to reduction of production costs, equipment size, energy consumption and waste generation. For these reasons, a bibliometric survey of paraffin/olefin membrane separation processes is carried out in the present study in order to evaluate the maturity of the technology for this specific application. Although different studies have proposed the use of distinct alternatives for olefin/paraffin separations, the present work makes clear that consensus has yet to be reached among researchers and technicians regarding the specific membranes and operation conditions that will make these processes scalable for large-scale commercial applications.

Mixed matrix membranes for hydrocarbons separation and recovery: a critical review

The separation and purification of light hydrocarbons are significant challenges in the petrochemical and chemical industries. Because of the growing demand for light hydrocarbons and the environmental and economic issues of traditional separation technologies, much effort has been devoted to developing highly efficient separation techniques. Accordingly, polymeric membranes have gained increasing attention because of their low costs and energy requirements compared with other technologies; however, their industrial exploitation is often hampered because of the trade-off between selectivity and permeability. In this regard, high-performance mixed matrix membranes (MMMs) are prepared by embedding various organic and/or inorganic fillers into polymeric materials. MMMs exhibit the advantageous and disadvantageous properties of both polymer and filler materials. In this review, the influence of filler on polymer chain packing and membrane sieving properties are discussed. Furthermore, the influential parameters affecting MMMs affinity toward hydrocarbons separation are addressed. Selection criteria for a suitable combination of polymer and filler are discussed. Moreover, the challenges arising from polymer/filler interactions are analyzed to allow for the successful implementation of this promising class of membranes.

Cellulose Nanocrystal (CNC) Coatings with Controlled Anisotropy as High-Performance Gas Barrier Films

Cellulose nanomaterials are promising materials for the polymer industry due to their abundance and renewability. In packaging applications, these materials may impart enhanced gas barrier performance due to their high crystallinity and polarity. In this work, low barrier to superior gas barrier pristine nanocellulose films were produced using a shear-coating technique to obtain a range of anisotropic films. Induction of anisotropy in a nanocellulose film can control the overall free volume of the system which effectively controls the gas diffusion path; hence, controlled anisotropy results in tunable barrier properties of the nanocellulose films. The highest anisotropy materials showed a maximum of 900-fold oxygen barrier improvement compared to the isotropic arrangement of nanocellulose film. The Bharadwaj model of nanocomposite permeability was modified for pure nanoparticles, and the CNC data were fitted with good agreement. Overall, the oxygen barrier performance of anisotropic nanocellulose films was 97 and 27 times better than traditional barrier materials such as biaxially oriented poly(ethylene terephthalate) (BoPET) and ethylene vinyl alcohol copolymer (EVOH), respectively, and thus could be utilized for oxygen-sensitive packaging applications.

Modeling Permeation through Mixed-Matrix Membranes: A Review

Over the past three decades, mixed-matrix membranes (MMMs), comprising an inorganic filler phase embedded in a polymer matrix, have emerged as a promising alternative to overcome limitations of conventional polymer and inorganic membranes. However, while much effort has been devoted to MMMs in practice, their modeling is largely based on early theories for transport in composites. These theories consider uniform transport properties and driving force, and thus models for the permeability in MMMs often perform unsatisfactorily when compared to experimental permeation data. In this work, we review existing theories for permeation in MMMs and discuss their fundamental assumptions and limitations with the aim of providing future directions permitting new models to consider realistic MMM operating conditions. Furthermore, we compare predictions of popular permeation models against available experimental and simulation-based permeation data, and discuss the suitability of these models for predicting MMM permeability under typical operating conditions.

Significance, evolution and recent advances in adsorption technology, materials and processes for desalination, water softening and salt removal

Desalination and softening of sea, brackish, and ground water are becoming increasingly important solutions to overcome water shortage challenges. Various technologies have been developed for salt removal from water resources including multi-stage flash, multi-effect distillation, ion exchange, reverse osmosis, nanofiltration, electrodialysis, as well as adsorption. Recently, removal of solutes by adsorption onto selective adsorbents has shown promising perspectives. Different types of adsorbents such as zeolites, carbon nanotubes (CNTs), activated carbons, graphenes, magnetic adsorbents, and low-cost adsorbents (natural materials, industrial by-products and wastes, bio-sorbents, and biopolymer) have been synthesized and examined for salt removal from aqueous solutions. It is obvious from literature that the existing adsorbents have good potentials for desalination and water softening. Besides, nano-adsorbents have desirable surface area and adsorption capacity, though are not found at economically viable prices and still have challenges in recovery and reuse. On the other hand, natural and modified adsorbents seem to be efficient alternatives for this application compared to other types of adsorbents due to their availability and low cost. Some novel adsorbents are also emerging. Generally, there are a few issues such as low selectivity and adsorption capacity, process efficiency, complexity in preparation or synthesis, and problems associated to recovery and reuse that require considerable improvements in research and process development. Moreover, large-scale applications of sorbents and their practical utility need to be evaluated for possible commercialization and scale up.

Mathematical Modeling and Investigation on the Temperature and Pressure Dependency of Permeation and Membrane Separation Performance for Natural gas Treatment

Due to special features, modules comprising asymmetric hollow fiber membranes are widely used in various industrial gas separation processes. Accordingly, numerous mathematical models have been proposed for predicting and analyzing the performance. However, majority of the proposed models for this purpose assume that membrane permeance remains constant upon changes in temperature and pressure. In this study, a mathematical model is proposed by taking into account non-ideal effects including changes in pressure and temperature in both sides of hollow fibers, concentration polarization and Joule-Thomson effects. Finite element method is employed to solve the governing equations and model is validated using experimental data. The effect of temperature and pressure dependency of permeance and separation performance of hollow fiber membrane modules is investigated in the case of CO2/CH4. The effect of temperature and pressure dependence of membrane permeance is studied by using type Arrhenius type and partial immobilization equations to understand which form of the equations fits experimental data best. Findings reveal that the prediction of membrane performance for CO2/CH4 separation is highly related to pressure and temperature; the models considering temperature and pressure dependence of membrane permeance match experimental data with higher accuracy. Also, results suggest that partial immobilization model represents a better prediction to the experimental data than Arrhenius type equation.

Mathematical Modeling of Natural Gas Separation Using Hollow Fiber Membrane Modules by Application of Finite Element Method through Statistical Analysis

Hollow fiber membrane permeators used in the separation industry are proven as preferred modules representing various benefits and advantages to gas separation processes. In the present study, a mathematical model is proposed to predict the separation performance of natural gas using hollow fiber membrane modules. The model is used to perform sensitivity analysis to distinguish which process parameters influence the most and are necessary to be assessed appropriately. In this model, SRK equation was used to justify the nonideal behavior of gas mixtures and Joule-Thomson equation was employed to take into account the changes in the temperature due to permeation. Also, the changes in temperature along shell side was calculated via thermodynamic principles. In the proposed mathematical model, the temperature dependence of membrane permeance is justified by the Arrhenius-type equation. Furthermore, a surface mole fraction parameter is introduced to consider the effect of accumulation of less permeable component adjacent to the membrane surface in the feed side. The model is validated using experimental data. Central Composite Designs are used to gain response surface model. For this, fiber inner diameter, active fiber length, module diameter and number of fibers in the module are taken as the input variables related to the physical geometries. Results show that the number as well as the length of the fibers have the most influence on the membrane performance. The maximum mole fraction of CO2 in the permeate stream is observed for low number of fibers and fibers having smaller active lengths. Also results indicate that at constant active fiber length, increasing the number of fibers decreases the permeate mole fraction of CO2. The findings demonstrate the importance of considering appropriate physical geometries for designing hollow fiber membrane permeators for practical gas separation applications.

Synthesis, characterization and gas separation properties of novel copolyimide membranes based on flexible etheric–aliphatic moieties

The structural properties and gas permeation of a group of copolyimide membranes were investigated.

A predictive model for gas and vapor sorption into glassy membranes at high pressure

A predictive model was developed based on NELF model using FFV for gas and vapor sorption into glassy membranes at high pressure.

Tailoring PES nanofiltration membranes through systematic investigations of prominent design, fabrication and operational parameters

Design and fabrication of nanofiltration (NF) membranes with the desired characteristics and separation performance is of paramount importance.

Simulation and sensitivity analysis of transport in asymmetric hollow fiber membrane permeators for air separation

Development of advanced membranes requires deep insights about the process. Sensitivity analysis is performed to analyze the effects of module properties and process operational conditions on the performance of air separation membrane permeators.