Experimental and Computational Anticorrosion Behaviors of Pyrazole s-Triazine/anilino-morpholino Derivatives for Steel in Acidic Solutions

The corrosion inhibition of C-steel by two s-triazine/morpholino-anilino-pyrazole derivatives, namely, 4-(3,5-dimethyl-1H-pyrazol-1-yl)-6-morpholino-N-phenyl-1,3,5-triazin-2-amine (1) and N-(4-bromophenyl)-4-(3,5-dimethyl-1H-pyrazol-1-yl)-6-morpholino-1,3,5-triazin-2-amine (2) was investigated by impedimetric and potentiometric studies. It was found that (1) and (2) acted as cathodic-type corrosion inhibitors that retard the hydrogen evolution reaction. The percent corrosion inhibition, 98.5% for compound (2) (with bromo substituent) at 80 ppm, was slightly higher than 97.8% for (1) at 100 ppm. Thus, the replacement of a -H with -Br substituent increased the corrosion inhibition properties. Compound (2) exhibited Temkin isotherm adsorption, whereas compound (1) exhibited Langmuir adsorption. Scanning electron microscopy (SEM) analysis of the steel surface indicated that the inhibitors caused protection of the surface. The weight loss experiment also proved the decrease in the corrosion rate when inhibitors were added. The difference in inhibitory efficiency between compounds (1) and (2) was investigated by density functional theory (DFT) to study neutral and protonated species in gaseous and aqueous phases. The theoretical analysis demonstrated that compound (2) exhibited higher inhibitory activity on a metal surface compared to compound (1), aligning with the experimental results. The energy associated with the metal/adsorbate arrangement, represented by dE ads/dNi , was higher for (2) (-380.91 kcal mol-1) compared to (1) (-371.64 kcal mol-1). This indicated better adsorption of (2) over (1).

Corrosion inhibition study of 6061 aluminium alloy in the presence of ethyl 5-methyl-1-(4-nitrophenyl)-1H-1,2,3-triazole-4-carboxylate (NTE) in hydrochloric acid

The inhibitory effect of an ethyl 5-methyl-1-(4-nitrophenyl)-1H-1,2,3-triazole-4-carboxylate (NTE) was investigated on the corrosion of Al (AA6061) alloy at different temperatures (303-333 K) by Electrochemical impedance spectroscopy (EIS), Potentiodynamic polarization (PDP), and weight loss techniques. It was found that NTE molecules protect the aluminium against corrosion and its ability increases with increasing concentrations, and temperature resulting in better inhibitory performance. At all concentrations and temperature ranges, NTE exhibited mixed inhibitor action and complied with the Langmuir isotherm. At 100 ppm and 333 K, NTE demonstrated the highest inhibition efficiency (94%). The EIS results and the PDP results had a good level of concordance. A suitable mechanism for the corrosion prevention of AA6061 alloy was proposed. Atomic force microscopy (AFM) and scanning electron microscopy (SEM) were used to confirm the adsorption of an inhibitor onto the aluminium alloy surface. The electrochemical results were validated by morphological examination, which demonstrated that NTE prevents uniform corrosion of aluminium alloy in acid chloride solutions. The activation energy and thermodynamic parameters were computed, and the results were discussed.

DFT Study on Corrosion Inhibition by Tetrazole Derivatives: Investigation of the Substitution Effect

Corrosion is one of the problems that most industries face. Our aim in the current study is to perform density functional theory calculations and Monte Carlo simulation to theoretically investigate the corrosion inhibition of the copper (1 1 1) surface by tetrazole molecules and a group of their derivatives. These compounds have electron-donating groups (CH₃, CH₃O, and OH) and electron-withdrawing groups (F, CN, and NO₂). Two different isomeric forms of tetrazole molecules and their derivatives, including 1H and 2H tautomers, were studied in two configurations, parallel and perpendicular to the Cu (1 1 1) surface. With the help of DMol3 calculations, the most important parameters related to the molecular ability of tetrazole derivatives as corrosion inhibitors include the adsorption energy (ΔE), E _HOMO, E _LUMO, E _gap, and issues related to chemical reactions, including total hardness (η), electronegativity (χ), and electron fraction transitions from the anti-corrosion molecule to the copper atom (ΔN), were calculated and compared in the tetrazole molecules and their derivatives. Also, with the help of adsorption locator calculations, the inhibitory effects of these compounds were theoretically investigated in an acidic environment. Through these calculations, it was determined that tetrazole molecules with electron-donating groups adsorbed perpendicularly to the copper (1 1 1) surface, by forming a stronger bond, are considered suitable corrosion inhibitors. Also, among the examined molecules, the 2H-tetrazole isomer form plays a more influential role than the 1H-tetrazole form.

An Overview on the Performance of 1,2,3-Triazole Derivatives as Corrosion Inhibitors for Metal Surfaces

This review accounts for the most recent and significant research results from the literature on the design and synthesis of 1,2,3-triazole compounds and their usefulness as molecular well-defined corrosion inhibitors for steels, copper, iron, aluminum, and their alloys in several aggressive media. Of particular interest are the 1,4-disubstituted 1,2,3-triazole derivatives prepared in a regioselective manner under copper-catalyzed azide-alkyne cycloaddition (CuAAC) click reactions. They are easily and straightforwardly prepared compounds, non-toxic, environmentally friendly, and stable products to the hydrolysis under acidic conditions. Moreover, they have shown a good efficiency as corrosion inhibitors for metals and their alloys in different acidic media. The inhibition efficiencies (IEs) are evaluated from electrochemical impedance spectroscopy (EIS) parameters with different concentrations and environmental conditions. Mechanistic aspects of the 1,2,3-triazoles mediated corrosion inhibition in metals and metal alloy materials are also overviewed.

A Study of 1-Benzyl-3-phenyl-2-thiourea as an Effective Steel Corrosion Inhibitor in 1.0 M HCl Solution

1-Benzyl-3-phenyl-2-thiourea (BPTU) was studied as a steel corrosion inhibitor in 1.0 M HCl solution. Experimental methods were conducted including potentiodynamic polarization measurement (PPM), electrochemical impedance spectroscopy (EIS), and scanning electron microscopy (SEM) analysis. Quantum calculations were performed at B3LYP/6-311G(d,p). Hexamethylenetetramine (URO) was selected for comparison with BPTU. The results showed that BPTU with the concentration of 2 × 10−4 M and at the temperature of 30°C could protect the steel surface with the highest inhibition efficiency of 94.99% and 94.30% according to EIS and PPM, respectively. High temperature decreased BPTU’s ability to inhibit the steel corrosion. The adsorption of BPTU on the steel surface is followed by the modified Langmuir isotherm. Quantum chemical calculations showed that the thiourea functional group is the main adsorption center of BPTU. The experimental results are completely consistent with theoretical calculations.

The performance of three novel Gemini surfactants as inhibitors for acid steel corrosion: experimental and theoretical studies

Adipic acid was used to synthesize three nonionic Gemini surfactants containing different numbers of propylene oxide units in their structures. The produced surfactants have been characterized employing FTIR and 1H-NMR spectra. Some of the physical properties of them, namely, surface tension, maximum surface excess concentration, surface pressure, critical micelle concentration, and the minimal area of the surface taken by a single molecule, were computed. The inhibitory effect of the synthesized surfactants on the corrosion of C-steel (C45) in 1.0 M HCl solution was studied. Gravimetric and electrochemical methods were used for corrosion rate measurements. The outcomes acquired from the used methods showed that every one of the three surfactants works as a strong inhibitor for steel acidic corrosion. By raising surfactant concentration and exposure time, the inhibition proficiency improves. The inhibition efficiency exceeded 90% for the three compounds. The higher the propylene oxide units contained in the surfactant molecule the higher is its inhibition efficiency. Based on the findings, a mechanism for inhibitory action was proposed. Moreover, the density functional theory (DFT) and molecular electrostatic potential (MEP) were investigated for the three inhibitors. The calculated parameters were correlated with the inhibition efficiency.

Adipic acid was used to synthesize three nonionic Gemini surfactants containing different numbers of propylene oxide units in their structures.

Pivotal Role of Heteroatoms in Improving the Corrosion Inhibition Ability of Thiourea Derivatives

1,3-Diphenyl-2-thiourea (DPTU) and 1-phenyl-3-(2-pyridyl)-2-thiourea (PPTU) were selected as the researched subject for investigating the effect of heteroatoms on the low carbon steel corrosion inhibition ability. Results from the potentiodynamic polarization measurements (PPM) indicate that the addition of a nitrogen atom in the benzene ring increases the corrosion inhibition efficiency of PPTU (97.2%), being higher than that of DPTU (93.1%) at the same condition of 2.0 × 10^-4 M at 30 °C. The Nyquist diagrams show that increasing the concentrations of both DPTU and PPTU will enhance the charge-transfer resistance and reduce the double-layer capacitance. The obtained data based on PPM and electrochemical impedance spectroscopy methods are in accordance to the analysis based on the scanning electrochemical microscopy images. Besides, results from quantum chemical calculations prove that the heteroatoms in the inhibitor molecules are the adsorption centers, and the benzene rings increase the electrostatic interaction between the inhibitor molecules and the steel surface. Results from Monte Carlo and molecular dynamics simulation have clarified the adsorption mechanism of DPTU and PPTU on the steel surface. Adsorption energies confirm that PPTU displays the higher inhibition ability as compared with DPTU.

Experimental and DFT studies on the ultrasonic energy-assisted extraction of the phytochemicals of Catharanthus roseus as green corrosion inhibitors for mild steel in NaCl medium

Catharanthus roseus (Apocynaceae family) extract is rich in organic phytochemicals such as alkaloids, polyphenolic compounds, and flavonoids. It contains several functional entities such as fused heterocycles, and hydroxyl and carbonyl groups, which could be useful for corrosion inhibition of mild steel in NaCl environments. In the present work, ultrasonic energy was used to obtain the ethanolic extracts of root and stem which were then tested as corrosion inhibitors for mild steel in the presence of 3.5% NaCl. The corrosion inhibition process was studied by UV-visible spectroscopy, Fourier transform infrared spectroscopy, atomic force microscopy, weight loss, and electrochemical methods. After immersing in the corrosive medium, the microstructures of mild steel were investigated by scanning electron microscopy, X-ray diffraction, and ellipsometry. The extract of C. roseus showed excellent adsorption on mild steel surface as confirmed by DFT calculations. The results indicate that the extract of C. roseus acts as a mixed type corrosion inhibitor, where the stem extract is the most efficient inhibitor in 3.5% NaCl solution possibly due to the higher active area of stem phytochemicals.

C. roseus phytochemicals are physisorbed on the 111 Fe surface, and the oxygen non-bonding electron chemisorbed on the polarized state 111 Fe surface.

1-(2-Aminoethyl)-1-dodecyl-2-undecyl-4,5-dihydro-1H-imidazol-1-ium chloride, 1-(2-Aminoethyl)-1-dodecyl-2-tridecyl-4,5-dihydro-1H-imidazol-1-ium chloride as Corrosion Inhibitors for Carbon Steel in Oil Wells Formation Water

Introducing1-(2-aminoethyl)-1-dodecyl-2-undecyl-4,5-dihydro-1H-imidazol-1-ium chloride (LQI), 1-(2-aminoethyl)-1-dodecyl-2-tridecyl-4,5-dihydro-1H-imidazol-1-ium chloride (MQI) as two organic structures quaternary ammonium salts, which have been made and analyzed by FTIR, 1H NMR spectroscopic methods. (X-65) carbon steel’s corrosion in naturally formed rocks’ oil wells formation water in the nonappearance (Blank) and using a wide range of concentrations (50, 100, 200, 300, 400, 500 ppm) of these cationic surfactants, as inhibition blockers using direct current (DC), alternative current (AC) electrochemical ways. To sum up, the inhibition efficiency grew with up the gradual rise in the inhibitor content till having peaked at (500 ppm) registered (94.83%) for (MQI). Specifically, carbon steel’s morphology was closely inspected with the aid of highly automated scanning electron microscopy, and energy dispersive X-ray facilities. As a matter of fact, quantum chemical calculations enriched the theoretical study of the (LQI, MQI) compounds depend on energy levels’, energy maps, and 3D structures consideration.

Inhibition of mild steel corrosion in hydrochloric acid using two novel pyridine Schiff base derivatives: a comparative study of experimental and theoretical results

Herein, we present a comparative study of experimental and theoretical results on the inhibition of mild steel corrosion in hydrochloric acid using two novel pyridine Schiff base derivatives.

Synthetic, spectral and structural studies of a Schiff base and its anticorrosive activity on mild steel in H2SO4

A Schiff base compound, L, was developed as a mixed-type corrosion inhibitor to efficiently protect mild steel from corrosion in 0.5 M H₂SO₄ solution in a temperature range of 25 °C to 55 °C.

Enhanced corrosion inhibition properties of carboxymethyl hydroxypropyl chitosan for mild steel in 1.0 M HCl solution

CHPCS was synthesized and showed better corrosion inhibition than HPCS (corrosion inhibition of 95.3%); its corrosion inhibition mechanism is presented.

Synthesis and evaluation of novel series of Schiff base cationic surfactants as corrosion inhibitors for carbon steel in acidic/chloride media: experimental and theoretical investigations

A new family of Schiff base cationic surfactants (CSSB) having various alkyl chain lengths were prepared and their chemical structure was elucidated by using different spectroscopic techniques (FTIR, ¹³C-NMR and ¹H-NMR).

l-Proline-promoted synthesis of 2-amino-4-arylquinoline-3-carbonitriles as sustainable corrosion inhibitors for mild steel in 1 M HCl: experimental and computational studies

The inhibition of mild steel corrosion in 1 M HCl by 3-aryl substituted 2-aminoquinoline-3-carbonitriles has been investigated using weight loss, electrochemical, surface and quantum chemical calculation methods.

Corrosion inhibition of mild steel by an imidazolium ionic liquid compound: the effect of pH and surface pre-corrosion

The corrosion inhibition performance of 1-decyl-3-methylimidazolium chloride (DMICL) on mild steel was investigated in a carbon dioxide-saturated NaCl solution at pH 3.8 and 6.8.