Determination of lead(II) in food samples using a functionalized paper-based fluorescent sensor modified by carbon dots

This work discusses surface modification of cellulose paper specimens for compatibility with nitrogen and sulfur co-doped carbon dots (NSCDs) for lead ion sensing. The interaction of carbon dots (CDs) and cellulose fibers was investigated using silane or chitosan-modified cellulose papers. It was found that modified papers could reduce undesirable redistribution of CDs, during paper drying. Also, only chitosan-modified filter paper was suitable for the successful immobilization of NSCDs. The effect of paper type, chitosan amount, pH, and NSCDs concentration was also studied, and a Whatman No. 42 filter paper modified with chitosan (1% w/v), pH 8.0, and an NSCD concentration of 2.5 g L-1 being selected for further studies. The sensor exhibited high selectivity for lead(II) compared with other metal ions because lead(II) resulted in the most significant changes in the emitted light intensity. Variations in NSCDs fluorescence were measured using a fluorescence imaging system. The NSCDs-paper sensor showed a linear relationship between mean fluorescence intensity and lead(II) in the concentration range of 5.00-1.25 × 102  μmol L-1 with a correlation coefficient (R2 ) of 0.9988 and a detection limit of 4.50 μmol L-1 . The suggested method showed satisfying results for lead(II) determination in different samples as a fast and low-cost approach with on-site application.

A Review of Sensing Applications of Molecularly Imprinted Fluorescent Carbon Dots for Food and Biological Sample Analysis

Molecularly imprinted fluorescent carbon dots (MI-FCDs) find numerous applications in analytical chemistry due to their outstanding photoluminescent properties and having specific pockets for the recognition of target molecules. Despite significant advances, practical applications of MI-FCDs-based fluorescent sensors are still in their initial stages. Therefore, the topical developments in the synthesis, working, and application of MI-FCDs for sensing various target species (e.g., pharmaceuticals, biomolecules, pesticides, food additives, and miscellaneous species) in food and biological media have been highlighted. Moreover, a careful evaluation has been made to select the best methods based on their performance in terms of analytical parameters. To expand the horizons of this field, important challenges and future directions for developing MI-FCDs for practical use are also presented. This review will highlight important aspects of MI-FCDs-based fluorescent sensors for their applicability in food science, material science, environmental science, nanoscience, and biotechnology.

Mesoporous silica imprinted carbon dots for the selective fluorescent detection of triclosan

A molecularly imprinted fluorescence sensor built as a mesoporous structured silica imprinted layer on the surface of carbon dots (CDs@m-MIP) was employed for the selective detection of triclosan (TRI). The fluorescence of this CDs@m-MIP was affected sensitively and selectively by TRI via an electron transfer-induced fluorescence quenching mechanism with a detection limit of TRI at 1.08 nM (range 1.72-138 nM) under the optimum setup (e.g., pH, response time, and CDs@m-MIP dose). This approach was used successfully to detect TRI in real water samples (e.g., sewage, river, and tap water). The recoveries of TRI were satisfactory in spiked river and tap water (in 94.7-99.5 %). The outcome of this research is thus expected to help develop highly efficient fluorescent sensing systems towards diverse hazardous compounds including TRI.

Application progress of magnetic molecularly imprinted polymers chemical sensors in the detection of biomarkers

Specific recognition and highly sensitive detection of biomarkers play an essential role in identification, early diagnosis and prevention of many diseases. Magnetic molecularly imprinted polymers (MMIPs) have been widely used to capture biomimetic receptors for targets in various complex matrices due to their superior recognition ability, structural stability, and rapid separation characteristics, which overcome the existing deficiencies of traditional recognition elements such as antibodies, aptamers. The integration of MMIPs as recognition elements with chemical sensors opens new opportunities for the development of advanced analytical devices with improved selectivity and sensitivity, shorter analysis time, and lower cost. Recently, MMIPs-chemical sensors (MMIPs-CS) have made significant progress in detection, but many challenges and development spaces remain. Therefore, this review focuses on the research progress of the sensor based on biomarker detection and introduces the surface modification of the magnetic support material used to prepare high selective MMIPs, as well as the selective extraction of target biomarkers by MMIPs from the complex biological sample matrix. Based on the understanding of optical sensors and electrochemical sensors, the applications of MMIPs-optical sensors (MMIPs-OS) and MMIPs-electrochemical sensors (MMIPs-ECS) for biomarker detection were reviewed and discussed in detail. Moreover, it provides an overview of the challenges in this research area and the potential strategies for the rational design of high-performance MMIPs-CS, accelerating the development of multifunctional MMIPs-CS.

Fluorescent Carbon Dots and their Applications in Sensing of Small Organic Molecules

Background:

Fluorescence-based sensing is considered highly sensitive and fluorescent probes with improved properties are always desired. Fluorescent carbon dots (CDs) are newly emerging quasi-spherical nanoparticles of less than 10 nm in size and belong to the carbon nano-material’s family. CDs have great potential as fluorescent probes and currently are under open deliberation by the researchers due to their striking properties such as low environmental hazard, high selectivity, greater sensitivity, good biocompatibility, tunable fluorescent properties and excitation dependent multicolor emission behavior.

Introduction:

This review demonstrates various available methods for fabrication of fluorescent CDs, capping of CDs and characterization with various techniques including UV-visible, FT-IR, and TEM. Analytical applications using CDs for the sensing of small organic molecules, specifically nitroaromatic compounds in the environmental samples are complied.

Methods:

The review covers literature related to synthesis and characterization of carbon dots. It includes around 171 research articles in this field.

Results:

Carbon dots can be synthesized using numerous routes. In all cases CDs possess spectral properties with little variation in wavelength maxima. Optical properties of CDs can be tuned by compositing these with metallic quantum dots or by modifying their surface with desired functionalities. HR-TEM is needed to see the morphology and size of particles whereas UV-Visible and FTIR are indispensable tools for this kind of research. These particles are successfully applied to sense small molecules in some matrices.

Conclusion:

Carbon dots are bright stars in fluorescent sensing of small molecules. However, more research is needed to determine small organic molecules in diversified areas of analysis.

Novel Metal-Free Fluorescent Sensor Based on Molecularly Imprinted Polymer N-CDs@MIP for Highly Selective Detection of TNP

In this article, we designed a fluorometric sensor based on nitrogen-passivated carbon dots infused with a molecularly imprinted polymer (N-CDs@MIP) via a reverse microemulsion technique using 3-aminopropyltriethoxysilane as a functional monomer, tetraethoxysilane as a cross-linker, and 2,4,6-trinitrophenol (TNP) as a template. The synthesized probe was used for selective and sensitive detection of trace amounts of TNP. The infusion of N-CDs (QY-21.6 percent) with a molecularly imprinted polymer can increase the fluorescent sensor sensitivity to detect TNP. Removal of template molecules leads to the formation of a molecularly imprinted layer, and N-CDs@MIP fluorescence response was quenched by TNP. The developed fluorescence probe shows a fine linear range from 0.5 to 2.5 nM with a detection limit of 0.15 nM. The synthesized fluorescent probe was used to analyze TNP in regular tap and lake water samples.

Carbon dot composites for bioapplications: a review

Recent advancements in the synthesis of carbon dot composites and their applications in biomedical fields (bioimaging, drug delivery and biosensing) have been carefully summarized. The current challenges and future trends of CD composites in this field have also been discussed.

A novel magnetic fluorescent molecularly imprinted sensor for highly selective and sensitive detection of 4-nitrophenol in food samples through a dual-recognition mechanism

In this study, surface imprinting, magnetic separation, and fluorescent detection were integrated to develop a dual-recognition sensor (MF-MIPs), which was used for highly selective and sensitive detection of 4-nitrophenol (4-NP) in food samples. Silane-functionalized carbon dots (Si-CDs) participated in the imprinting process and were uniformly distributed into the MIPs layers. MF-MIPs sensor exhibited a high fluorescence response and selectivity based on the dual-recognition mechanism of imprinting recognition and fluorescence identification. The relative fluorescence intensity of MF-MIPs sensor presented a good linear relationship in the range of 0.08-10 μmol·L^-1 with a low limit of detection (23.45 nmol·L¹) for 4NP. MF-MIPs sensor showed high anti-interference, as well as excellent stability and reusability. The 4-NP recovery from spiked food samples ranged from 93.20 to 102.15%, and the relative standard deviation was lower than 5.0%. Therefore, MF-MIPs sensor may be a promising method for 4-NP detection in food samples.

Semiconductor nanocrystal-polymer hybrid nanomaterials and their application in molecular imprinting

Quantum dots (QDs) are attractive semiconductor fluorescent nanomaterials with remarkable optical and electrical properties. The broad absorption spectra and high stability of QD transducers are advantageous for sensing and bioimaging. Molecular imprinting is a technique for manufacturing synthetic polymeric materials with a high recognition ability towards a target analyte. The high selectivity of the molecularly imprinted polymers (MIPs) is a result of the fabrication process based on the template-tailored polymerization of functional monomers. The three-dimensional cavities formed in the polymer network can serve as the recognition elements of sensors because of their specificity and stability. Appending specific molecularly imprinted layers to QDs is a promising strategy to enhance the stability, sensitivity, and selective fluorescence response of the resulting sensors. By merging the benefits of MIPs and QDs, inventive optical sensors are constructed. In this review, the recent synthetic strategies used for the fabrication of QD nanocrystals emphasizing various approaches to effective functionalization in aqueous environments are discussed followed by a detailed presentation of current advances in QD conjugated MIPs (MIP-QDs). Frontiers in manufacturing of specific imprinted layers of these nanomaterials are presented and factors affecting the specific behaviour of an MIP shell are identified. Finally, current limitations of MIP-QDs are defined and prospects are outlined to amplify the capability of MIP-QDs in future sensing.

Carbon-based quantum particles: an electroanalytical and biomedical perspective

Carbon-based quantum particles, especially spherical carbon quantum dots (CQDs) and nanosheets like graphene quantum dots (GQDs), are an emerging class of quantum dots with unique properties owing to their quantum confinement effect.

Ratiometric fluorescence nanosensors based on core-shell structured carbon/CdTe quantum dots and surface molecularly imprinted polymers for the detection of sulfadiazine

Sulfadiazine is an environmental pollutant derived from abuse of antibiotics. Its content in environmental water is closely related to human health. Thus, a novel dual-emission surface molecularly imprinted nanosensor is designed for the specific adsorption and detection of sulfadiazine. In the system, blue emissive carbon quantum dots wrapped with silica served as the internal reference signal for eliminating background interference, while red emissive thioglycolic acid modified CdTe quantum dots (CdTe QDs), which are low dimensional semiconductor materials by the combination of cadmium and tellurium with excellent optical properties, were encapsulated in the imprinted layer to offer recognition signal. The fluorescence of CdTe quantum dots was quenched and the fluorescence quenching degree of carbon quantum dots was inconspicuous with the increase of concentration of sulfadiazine, thereby reflecting the color change. The detection of sulfadiazine was successfully achieved in a concentration range of 0.25-20 μmol/L with detection limit of 0.042 μmol/L and nanosensors had specific recognition for sulfadiazine over its analogues. Compared to single-emission fluorescence sensors, ratiometric fluorescence nanosensors had wider linear range and higher detection accuracy. Furthermore, the nanosensors were also successfully applied for the determination of sulfadiazine in real water and milk samples with acceptable recoveries. The study provides a feasible method for the detection of sulfadiazine and a reference for the detection of sulfonamides.

Sol-Gel Chemistry for Carbon Dots

Carbon dots are an emerging class of carbon-based nanostructures produced by low-cost raw materials which exhibit a widely-tunable photoluminescence and a high quantum yield. The potential of these nanomaterials as a substitute of semiconductor quantum dots in optoelectronics and biomedicine is very high, however they need a customized chemistry to be integrated in host-guest systems or functionalized in core-shell structures. This review is focused on recent advances of the sol-gel chemistry applied to the C-dots technology. The surface modification, the fine tailoring of the chemical composition and the embedding into a complex nanostructured material are the main targets of combining sol-gel processing with C-dots chemistry. In addition, the synergistic effect of the sol-gel precursor combined with the C-dots contribute to modify the intrinsic chemo-physical properties of the dots, empowering the emission efficiency or enabling the tuning of the photoluminescence over a wide range of the visible spectrum.

A molecularly imprinted dual-emission carbon dot-quantum dot mesoporous hybrid for ratiometric determination of anti-inflammatory drug celecoxib

We report on a ratiometric fluorescent sensor based on dual-emission molecularly imprinted mesoporous silica embedded with carbon dots and CdTe quantum dots (mMIP@CDs/QDs) for celecoxib (CLX) as target molecule. The fluorescence of the embedded CDs is insensitive to the analyte while the green emissive QDs are selectively quenched by it. This effect is much stronger for the MIP than for the non-imprinted polymer, which indicates a good recognition ability of the mesoporous MIP. The hybrid sensor also exhibited good selectivity to CLX over other substances. The ratio of the intensity at two wavelengths (F₅₅₀/F₄₄₀) proportionally decreased with the increasing of CLX concentration in the range of 0.08-0.90μM. A detection limit as low as 57nM was achieved. Experimental results testified that this sensor was highly sensitive and selective for the detection of CLX in human serum samples.

Tracking Hyaluronan: Molecularly Imprinted Polymer Coated Carbon Dots for Cancer Cell Targeting and Imaging

War against cancer constantly requires new affinity tools to selectively detect, localize, and quantify biomarkers for diagnosis or prognosis. Herein, carbon nanodots (CDs), an emerging class of fluorescent nanomaterials, coupled with molecularly imprinted polymers (MIPs), are employed as a biocompatible optical imaging tool for probing cancer biomarkers. First, N-doped CDs were prepared by hydrothermal synthesis using starch as carbon source and l-tryptophan as nitrogen atom provider to achieve a high quantum yield of 25.1 ± 2%. The CDs have a typical size of ∼3.2 nm and produce an intense fluorescence at 450 nm upon excitation with UV light. A MIP shell for specific recognition of glucuronic acid (GlcA) was then synthesized around the CDs, using the emission of the CDs as an internal light source for photopolymerization. GlcA is a substructure (epitope) of hyaluronan, a biomarker for certain cancers. The biotargeting and bioimaging of hyaluronan on fixated human cervical cancer cells using CD core-MIP shell nanocomposites is demonstrated. Human keratinocytes were used as noncancerous reference cells and indeed, less staining was observed by the CD-MIP.

Selective separation and identification of metabolite groups of Polygonum cuspidatum extract in rat plasma using dispersion solid-phase extraction by magnetic molecularly imprinted polymers coupled with LC/Q-TOF-MS

In this work, magnetic molecularly imprinted polymers (MMIPs) were successfully prepared for specific recognition and selective enrichment of metabolite groups of Polygonum cuspidatum extract in rat plasma.

Molecularly imprinted polymer-capped nitrogen-doped graphene quantum dots as a novel chemiluminescence sensor for selective and sensitive determination of doxorubicin

Molecularly imprinted polymer-capped nitrogen-doped graphene quantum dots (MIP@NGQDs) were prepared via a simple sol–gel process and used for chemiluminescence detection of doxorubicin.

Hollow imprinted polymer nanorods with a tunable shell using halloysite nanotubes as a sacrificial template for selective recognition and separation of chloramphenicol

Hollow imprinted polymer nanorods with excellent regeneration property were prepared for selective recognition and separation of chloramphenicol.