Simultaneous detection of mercury and cadmium ions: A colorimetric method in aqueous media

Hg and Cd are the two most toxic heavy metal ions that could be found in aqueous solutions. In this study, a chemosensor based on 5-(4-((4-nitrophenyl) diazenyl) phenyl)-1,3,4-oxadiazole-2-thiol (DOT) was reported to detect these ions simultaneously. DOT showed high selectivity towards Hg ion by changing the color of the solution from beige to gold-yellow at different concentrations of Hg ion. In comparison, other relevant metals, such as Li+, Na+, K+, Cs+, Mg2+, Ca2+, Al3+, Fe2+, Ag+, Cu2+, Pb2+, Ni2+, Zn2+, Cr3+, Fe3+, Pb4+, Mn2+, and Cd2+ did not affect the color of the DOT solution as the interfering ions. Despite no changes in the color of DOT solution in the presence of Cd ion, a solution containing DOT-Hg complex was changed from gold-yellow to orange by adding Cd ion, providing an approach for detecting Hg and Cd ion simultaneously with UV-Vis and Fluorescent spectroscopy. DOT exhibited a high association constant with a detection limit of 0.05 μM for Hg and Cd ions in an aqueous solution. The results of quantum mechanics (QM) calculations were also consistent with the experimental observations, which indicated that changes in the band gap could explain the various colors of DOT complex with metal ions.

Multi-responsive paper chemosensors based on mesoporous silica nanospheres for quantitative sensing of heavy metals in water

Exposure to low concentrations of heavy metal cations seriously harms living organisms, hence they are considered environmental toxins. Portable simple detection systems are required for field monitoring of multiple metal ions. In this report, paper-based chemosensors (PBCs) were prepared by adsorbing 1-(pyridin-2-yl diazenyl) naphthalen-2-ol (chromophore), which recognizes heavy metals, onto filter papers coated with mesoporous silica nano spheres (MSNs). The high density of the chromophore probe on the surface of PBCs resulted in ultra-sensitive optical detection of heavy metal ions and short response time. The concentration of metal ions was determined using digital image-based colorimetric analysis (DICA) and compared to spectrophotometry under optimal sensing conditions. The PBCs exhibited stability and short recovery times. The detection limits determined using DICA of Cd²⁺, Co²⁺, Ni²⁺ and Fe³⁺ were 0.22, 0.28, 0.44, and 0.54 μM; respectively. Additionally, the linear ranges for monitoring Cd²⁺, Co²⁺, Ni²⁺ and Fe³⁺ were 0.44-4.4, 0.16-4.2, 0.8-8.5, and 0.002-5.2 μM; respectively. The developed chemosensors showed high stability, selectivity, and sensitivity for sensing of Cd²⁺, Co²⁺, Ni²⁺ and Fe³⁺ in water under optimum conditions and hold potential for low cost, onsite sensing of toxic metals in water.

Monitoring of Cobalt and Cadmium in Daily Cosmetics Using Powder and Paper Optical Chemosensors

Daily used cosmetics may contain high levels of heavy metals which are added to improve the quality and shine of cosmetics but represent a threat to human health. In this report, powder- and paper-based optical nanosensors using mesoporous silica nanospheres as carriers were designed for determination of Co²⁺ and Cd²⁺ in commonly used cosmetics. Powder optical chemosensors (POCs) were prepared via direct decoration of optical probes into a porous carrier. Paper-based chemosensors (PBCs) were designed via adsorbing the organic chromophore onto filter papers treated with mesoporous silica. POCs and PBCs were constructed with thick decoration of optical probes, leading to the formation of active surface centers for monitoring of Co²⁺ and Cd²⁺ in cosmetic products. The uniform structures of POCs and PBCs have resulted in selective sensing and low detection limits up to parts per billion, wide detection range determination, and fast response (on the order of seconds). Digital image colorimetric analysis (DICA) was used to quantify the color of PBCs and deduce the corresponding concentrations of Co²⁺ and Cd²⁺ using calibration curves. DICA data correlated well with that obtained from UV-vis spectrophotometry. The developed POCs and PBCs showed wide detection ranges of metal ions and a considerably low detection limit under optimal analysis conditions. The low limit of detection of Co²⁺ and Cd²⁺ ions using POCs was 6.7 × 10^-9 and 3.5 × 10^-9 M, respectively. To the best of our knowledge, this is the first time simple PBCs have been designed for monitoring Co²⁺ and Cd²⁺ with detection limits of 2.2 × 10^-7 and 1.3 × 10^-7 M. A limited amount of manufactured POCs (about 20 mg) were used for all measurements, and commercial filter paper treated with mesoporous nanosphere silica was used for sensing Co²⁺ and Cd²⁺ ions. The developed optical chemosensors had short regeneration times and exhibited high stability and surface functionality and are capable of monitoring Co²⁺ and Cd²⁺ in various cosmetic products.

Engineering Grey Nanosystem as Activatable Ratio-colorimetric Probe for Detection of Lead Ions in Preserved Egg

A grey system based on the principle of complementary colors was constructed as an activatable probe for the sensitive and specific ratio-colorimetric detection lead ions (Pb²⁺) in a complex food matrix. This grey system was prepared by mixing purple-red AuNP-capped glutathione (GSH) and green-blue sulfonated pigment green 7 (SPG7), to create the SPG7/AuNP probe. In the presence of Pb²⁺, the strong chelation of Pb²⁺ with GSH could trigger the aggregation of AuNPs, leading to the color activation of SPG7. Hence, the absorbance ratio A_523nm/A_628nm of AuNPs at ∼523 nm and SPG7 at ∼628 nm could be used for highly specific reporting of Pb²⁺ levels with a low detection limit of 0.33 μg/L. Moreover, this probe exhibited promising practical applications in real preserved egg samples with recoveries of 89.2 to 107.5% and relative standard deviations (RSD) in the range of 0.28 to 2.12%, revealing its great potential for harmful substance detection.

Analysis of lead forms and transition in agricultural soil by nano-fluorescence method

The physicochemical properties of gold nanorods were used to develop many methods and techniques of detecting heavy metals recently. In this paper, the feasibility of gold nanorods was studied to detect metal lead in agricultural soil. The effects of soil properties on the form change of lead in soil were explored by gold nanorod detection technology. The results showed that the humic acid significantly increased Pb mobility and ion state exchanging. It also increased the lead content of organic bound state and Fe-Mn oxides state. And the detection process by gold nanorods proved to be a more simple and convenient method.

Rapid ratiometric detection of Cd2+ based on the formation of ZnSe/CdS quantum dots

Developing simple and sensitive non-aggregation strategy for detecting Cd²⁺ is necessary for improving the selectivity and sensitivity of probe. Here, we establish a simple, rapid and ratiometric strategy for the recognition of Cd²⁺ based on the formation of core-shell ZnSe/CdS structure using ZnSe quantum dots (QDs). The transformation from binary ZnSe QDs to core-shell ZnSe/CdS QDs both change the elemental composition and structure of ZnSe QDs, leading to the changes in band gap of ZnSe QDs, which could be observed in the UV-vis spectra. In the detection process, ZnSe QDs only possess absorption peak at 343 nm, the formation of ZnSe/CdS after the addition of Cd²⁺ leads to the appearance of the new peak at 397 nm, while other heavy metal ions could not cause the appearance of new absorption peak. Therefore, this strategy shows good selectivity for Cd²⁺ detection. Based on this strategy, the limit of detection (LOD) for Cd²⁺ is 11 nM by UV-vis spectroscopy with a desirable relation of linearity (R² = 0.999) between A₃₉₇/A₃₄₃ and Cd²⁺ contents, which is superior to the LOD of most reported nanomaterials. The response time for Cd²⁺ detection is as short as 60 s, which is suitable for rapid detection. This ratiometric probe has also been applied to the detection of Cd²⁺ in tap water samples, the recovery of Cd²⁺ was between 94.9% and 105.6% for tap water samples, indicating the high accuracy of our ratiometric assay. Our strategy not only provided a new method for detecting Cd²⁺, but also put forward an implication that the band energy changes of QDs caused by heavy metal ions can be applied in the selective and sensitive detection of heavy metal ions.

Plant-based gold nanoparticles; a comprehensive review of the decade-long research on synthesis, mechanistic aspects and diverse applications

The worldwide focus on research in the field of green nanotechnology has resulted in the environmentally and biologically safe applications of a diversity of nanomaterials. Nanotechnology, in general, implies the production of nanoparticles having different but regular shapes, sizes, and properties. A lot of studies have been conducted on the synthesis of metal nanoparticles through biological, chemical, and physical methods. Owing to its safety, both environmental and in vivo, as well as the ease of synthesis, biogenic routes especially the plant-based synthesis of metal nanoparticles has been preferred as the best strategy. Among the metal nanoparticles, gold nanoparticles are recognized as the most potent, biocompatible and environment-friendly. A decade of research work has attempted the production of gold nanoparticles mediated by different parts of various plants. Further, these nanoparticles have been engineered through modification in the sizes and shapes for attaining enhanced activity and optimal performance in many different applications including biomedical, antimicrobial, diagnostics and environmental applications. This article reviews the fabrication strategies for gold nanoparticles via plant-based routes and highlights the diversity of the applications of these materials in bio-nanotechnology. The review article also highlights the recent developments in the synthesis and optical properties of gold nanoparticles.

Electrochemical Detection of Gallic Acid-Capped Gold Nanoparticles Using a Multiwalled Carbon Nanotube-Reduced Graphene Oxide Nanocomposite Electrode

Recently, a plethora of ecofriendly methods have been developed for the synthesis of AuNPs using a multitude of biogenic agents. Polyphenols from plants are particularly attractive for producing AuNPs because in addition to helping with the synthesis of AuNPs, the polyphenol capping of the NPs can be used as a platform for versatile applications. Polyphenol-capped AuNPs could also make the detection of AuNPs possible, should they be released into the environment. Because polyphenols are redox-active, they can be used as a probe to detect AuNPs using electrochemical techniques. In this work, we have developed an MWCNT-rGO nanocomposite electrode for the sensitive detection of AuNPs capped with gallic acid (GA, a green-tea-derived polyphenol) using differential pulse voltammetry (DPV). The reduction of gallic acid-capped AuNPs was used as the quantification signal, and the calibration curve displayed a detection limit of 2.57 pM. Using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS), we have shown that the modification of the electrode surface with an MWCNT-rGO hybrid nanocomposite resulted in a 10-fold increase in current response leading to the sensitive detection of GA-AuNPs compared to unmodified electrodes. We have also demonstrated the applicability of the electrochemical sensor in detecting GA-AuNPs in various analytical matrixes such as human serum and natural creek water (Highland Creek, ON) with good recovery.

Ultratrace and robust visual sensor of Cd2+ ions based on the size-dependent optical properties of Au@g-CNQDs nanoparticles in mice models

Visual inspection is expected as an ideal technique, which can directly and conveniently detect heavy metal ions by observing the color change. Insensitivity of detecting weakly colored heavy transition metal ions and low adsorptivity of metal ions on nanoparticle surface are two main factors hindering the application of visual detection in heavy metal ions detection. Herein, we demonstrated an operational colorimetric sensor based on the color dependence of nanoparticles aggregation to selective and facile detect weakly colored transition heavy metal Cd²⁺ ions that have been considered as the origin of the "Itai-itai" disease. Uniform colloidal 15nm graphite-like nitride doped carbon quantum dots-capped gold nanoparticle (Au@g-CNQDs) was successfully prepared, wherein the existence of numerous heptazine, carboxyl and hydroxyl groups on the nanoparticle's surface strengthened adsorption of the Cd²⁺ ions on the surface of Au@g-CNQDs through the "cooperative effect". As a consequence, without expensive and intricate exogenous indicators or other special additives, the Cd²⁺ ions could sensitively and quickly captured to detect at ultra-low concentration within 30s by the naked-eye. Under the optimal conditions, the Cd²⁺ ions sensor possesses good analytical performances with a wide linear range of 0.01-3.0μM and a detection limit of 10nM (S/N = 3). Moreover, the biodistribution and aggregation of Cd²⁺ ions were detected effectively in mice organ tissues suggesting its great potential use for real-word applications.

siRNA delivery using polyelectrolyte-gold nanoassemblies in neuronal cells for BACE1 gene silencing

Small interfering RNA (siRNA) mediated RNA interference is a versatile therapeutic tool for many intractable genetic disorders. Various nanoassemblies specifically designed to deliver the siRNAs could be utilized for efficient siRNA delivery which is one of the major concern for the success of this therapeutic. Thus, in the present study, polyelectrolyte-gold nanoassemblies (PE-Gold NAs) were selected for siRNA delivery of an in vitro verified siRNA. Three different polyelectrolytes (polyethyleneimine, citraconic anhydride modified poly (allylamine) hydrochloride and poly l-arginine) were used to formulate the PE-Gold NAs using the layer-by-layer technique. Successful physico-chemical characterizations of these PE-Gold NAs were performed using UV-Visible, FTIR, ¹H-NMR spectroscopies, XRD, TEM, DLS and Zeta potential measurements. In vitro studies for the cytotoxicity, the uptake of these nanoassemblies and the gene silencing were carried out using these PE-Gold NAs in N2a and NB4 1A3 (murine neuronal) cell lines. The three selected PE-Gold NAs showed significant BACE1 (β-site APP cleaving enzyme 1) gene silencing (50-60%). This work demonstrates the potential of PE-Gold NAs to deliver siRNA targeting BACE1 in neuronal cells. Finally, it was concluded that different polyelectrolytes used in the PE-Gold NAs achieve different gene silencing due to the variation in their delivery efficiencies.

Application of silver nanoparticles for a highly selective colorimetric assay of endrin in water and food samples based on stereoselective endo-recognition

We report a novel and facile strategy for a highly stereoselective colorimetric assay for the detection of endrin pesticide in water and food samples using sucrose capped silver nanoparticles (AgNPs).

Influence of gold nanoparticles applied to catalytic hydrogenation of acetophenone with cationic complexes containing ruthenium

AuNPsⁿ⁻have improved the catalytic activity of complexes that have biphosphines with tensioned or large bite angles, while for complexes that have biphosphines with a strong chelate effect a decrease was observed.

Ultrasensitive detection of sulfide ions through interactions between sulfide ions and Au(iii) quenching the fluorescence of chitosan microspheres functionalized with rhodamine B and modified with Au(iii)

A rapid and facile fluorescence probe for detecting sulfide ions was developed. The probe can be completely regenerated and was easily separated. The approach described here is a new and convenient way of developing reusable fluorescence probes.