Assessing the Impact of Sepiolite-Based Bio-Pigment Infused with Indigo Extract on Appearance and Durability of Water-Based White Primer

The objective of this study is to evaluate how two varying amounts of sepiolite-based powder, infused with indigo extract, affect the appearance and durability of a water-based, white primer. To examine the influence of this eco-friendly pigment on the coatings' overall appearance, assessments were performed for color, gloss, and surface roughness. Additionally, the coatings were investigated through optical and electron microscopic observations, to evaluate the distribution of the pigment within the polymer matrix. The effect of the pigment on the coating's durability was assessed through accelerated tests, including exposure in a salt spray chamber and a UV-B chamber. These tests aimed to evaluate the emergence of defects and changes in the appearance of the samples over time. Furthermore, the impact of different quantities of sepiolite-based powder on the coating's ability to act as a barrier was assessed using liquid resistance tests and contact angle measurements. These evaluations aimed to understand how the coating responded to various liquids and its surface properties concerning repellency or absorption. In essence, this study underscores the considerable influence of the eco-friendly pigment, demonstrating its capacity to introduce unique color and texture variations in the paint. Moreover, the inclusion of the pigment has enhanced the coating's color stability, its ability to act as a barrier, and its overall durability when exposed to harsh environments.

Entrapment of Acridine Orange in Metakaolin-Based Geopolymer: A Feasibility Study

Few studies have explored the immobilization of organic macromolecules within the geopolymer matrix, and some have found their chemical instability in the highly alkaline geopolymerization media. The present work reports on the feasibility of encapsulating the potentially toxic acridine orange (AO) dye in a metakaolin based geopolymer while maintaining its structural integrity. The proper structural, chemical, and mechanical stabilities of the final products were ascertained using Fourier-transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD), thermogravimetric (TGA/DTG), and mechanical analyses, whereas the dye integrity and its stability inside the geopolymer were investigated by the UV-Vis analysis. In addition, the antimicrobial activity was investigated. The FT-IR and XRD analyses confirmed the geopolymerization occurrence, whereas the TGA/DTG and mechanical (compressive and flexural) strength revealed that the addition of 0.31% (AO mg/ sodium silicate L) of AO to the fresh paste did not affect the thermal stability and the mechanical properties (above 6 MPa in flexural strength and above 20 MPa for compressive strength) of the hardened product. UV-Vis spectroscopy revealed that the dye did not undergo chemical degradation nor was it released from the geopolymer matrix. The results reported herein provide a useful approach for the safe removal of toxic macromolecules by means of encapsulation within the geopolymer matrix.

Characterisation of White Metakaolin-Based Geopolymers Doped with Synthetic Organic Dyes

Over the years, many materials have been used to restore buildings, paintings, ceramics, and mosaic pieces exhibiting different types of dyes and colour hues. Recently, geopolymers have been used for restoration purposes owing to their high chemical and mechanical resistance. In this work, white metakaolin was used to obtain white geopolymers, cured at 25 and 40 °C, as bulk materials to be coloured with synthetic organic dyes, i.e., bromothymol blue, cresol red, phenolphthalein, and methyl orange. These dyes were added during the fresh paste preparation to obtain dyed geopolymeric solids. Ionic conductivity and pH measurement confirmed the chemical stability of the consolidated materials, while FT-IR analyses were used to follow the geopolymerisation occurrences at different ageing times (from 7 to 56 days). Finally, the colour hues and properties were assessed in the CIELAB colour space before and after immersion in water.

Fibrous Clays in Dermopharmaceutical and Cosmetic Applications: Traditional and Emerging Perspectives

Functionalization of natural clay minerals for high value-added pharmaceutical and cosmetic applications receives significant research attention worldwide attributable to a rising demand and ongoing search for green, efficient, economically sustainable and ecofriendly geomaterials. Fibrous clays, i.e. palygorskite and sepiolite, are naturally-occurring hydrated magnesium aluminum silicate clay minerals with 2:1 layer-chain microstructure and one-dimensional nanofibrous morphology. Due to their unique structural, textural and compatibility features, over the past decade, fibrous clays and their organic modified derivatives are increasingly used in the dermopharmaceutical and cosmetic fields as excipients, active agents or nanocarriers to develop novel skin delivery systems or to modify drug release profile for enhanced health effects. This comprehensive review presents the up-to-date information on fibrous clays used in topically-applied products for therapeutic and cosmetic purposes with the focus on their performance-related structural characteristics and the underlying mechanisms. The recent advancement of fibrous clay-based skin delivery systems was summarized in wide range of applications including pelotherapy, wound healing, antimicrobial action, coloration and UV protection. An overview of the commonly used topically-applied dosage forms (powders, hydrogels, films, peloids and Pickering emulsion) as well as the toxicological aspects was also included, which might provide guidance to the design and development of fibrous clay-based skin delivery systems.

Geopolymers and Functionalization Strategies for the Development of Sustainable Materials in Construction Industry and Cultural Heritage Applications: A Review

In the last decades, new synthetic hybrid materials, with an inorganic and organic nature, have been developed to promote their application as protective coatings and/or structural consolidants for several substrates in the construction industry and cultural heritage field. In this context, the scientific community paid attention to geopolymers and their new hybrid functional derivatives to design and develop innovative and sustainable composites with better chemical resistance, durability and mechanical characteristics. This review offers an overview of the latest progress in geopolymer-based hybrid nanofunctional materials and their use to treat and restore cultural heritage, as well as their employment in the building and architectural engineering field. In addition, it discusses the influence of some parameters, such as the chemical and physical characteristics of the substrates, the dosage of the alkaline activator, and the curing treatment, which affect their synthesis and performance.

The Structure and Properties of Sepiolite with Partial Lattice Ions Substituted by Aluminum Ions

Sepiolite was modified with Al³⁺ via hydrothermal reaction. The substitution amount of Al³⁺ for Mg²⁺ and Si⁴⁺ located at sepiolite lattice and the influence of substitution amount on the structure, specific surface area, and surface acidity of Al-modified sepiolite were investigated. On this basis, indigo–sepiolite composite pigments were prepared by Al-modified sepiolite and indigo via grinding method to evaluate the influence of Al-modified sepiolite on the structure, bonding strength, and weather resistance of composite pigment. The crystal structure of Al-modified sepiolite had no obvious change after modification. Al³⁺ mainly substituted Mg²⁺ located at the octahedron of the sepiolite lattice, and the substitution amount was positively related to the dosage of Al³⁺. The specific surface area of Al-modified sepiolite decreased and the distribution of channel size became wider after Al modification. In addition, the absolute value of zeta potential decreased as well as the solid acid sites increased with the increase of Al substitution in Al-modified sepiolite. For indigo–sepiolite composite pigments, the structure of Al-modified sepiolite had no obvious change as well. The adsorption amount of indigo in composite pigment after treating by DMSO and Al content as well as weak acid amount in Al-modified sepiolite presented linear correlation, indicating that Al modification could enhance the bonding strength between indigo and Al-modified sepiolite by increasing the amount of coordinated water with Al. For indigo, Al-modified sepiolite could brighten the color and reduce the weather resistance of the prepared composite pigment. The results of this study provide a new idea and basis for regulating the structure and properties of clay and for studying the preparation of composite pigment and clay functional materials.

Physicochemical characterization, drug release, and biocompatibility evaluation of carboxymethyl cellulose-based hydrogels reinforced with sepiolite nanoclay

Polymer-clay nanocomposite hydrogel films (PCNCHFs) were prepared from caboxymethyl cellulose, polyvinylpyrrolidone, agar and nanosepiolite clay (0, 0.3, 0.5, 0.7, 0.9 and 1.5% reinforcement) by treating thermally in a simple, rapid, and inexpensive route. The PCNCHFs and its 5-fluorouracil (FU)-loaded composites (PCNCHFs@FU) were tested for FU release and characterized by FTIR, XRD, FE-SEM, EDX, DSC, and TGA analyses to investigate their structural, morphological, and thermal properties. The nanosepiolite-loaded polymer composites (PCNCHF1 to PCNCHF5) exhibited higher tensile strength than the pristine polymer hydrogel (PCNCHF0); consequently, the thermal properties (glass- and melting-transition) were improved. The PCNCHFs@FU demonstrated prolonged FU release at pH 7.4 for 32 h. The biocompatibility of PCNCHFs was tested against human skin fibroblast (CCDK) cells. The viability of cells exposed to all PCNCHFs was >95% after 72 h of culture. The live/dead assay show the proliferation of fibroblast cells, confirming the biocompatibility of the hydrogels. The pH-sensitive PCNCHFs@FU release could be suitable for drug release in cancer therapy, and the developed PCNCHFs may also be useful for tissue engineering, food packaging, and other biological applications.

Synthesis and photophysical studies of an indigo derivative: N-octyl-7,7'-diazaindigo

In this paper, we explore the synthesis, characterization, and photophysical properties of a novel indigo derivative, N-octyl-7,7'-diazaindigo, being the first time that diazaindigos have been studied as photophysically-active chemical entities. Reduction of the neutral "keto-form" to the so-called "leuco-form" changes the global spectroscopic and photophysical behaviors. Both species have been investigated by different photophysical studies, such as analysis of absorption and emission spectra, fluorescence quantum yields (Φ F) and lifetimes. Finally, to appraise in depth the deactivation of the excited state of the keto form, femtosecond transient absorption (TA) experiments and Density Functional Theory (DFT) and Time Dependent (TD)-DFT calculations were performed. In an organic aprotic solvent (N,N-dimethylformamide), TA experiments showed a fast deactivation channel (τ 1 = 2.9 ps), which was ascribed to solvent reorganization, and a longer decay component (τ 2 = 86 ps) associated with an internal conversion (IC) process to the ground-state, in opposition to the excited state proton transfer (ESPT) mechanism that takes place in the indigo molecules but in protic solvents. A comparative study was also carried out on the parent molecule, 7,7'-diazaindigo, corroborating the previous conclusions obtained for the alkyl derivative. In agreement with experimental observations, DFT and TD-DFT calculations revealed that the deactivation of the S1 state of the keto form takes place through an internal conversion process.

Fabrication of Eco-Friendly Betanin Hybrid Materials Based on Palygorskite and Halloysite

Eco-friendly betanin/clay minerals hybrid materials with good stability were synthesized by combining with adsorption, grinding, and heating treatment using natural betanin extracted from beetroot and natural 2:1 type palygorskite or 1:1 type halloysite. After incorporation of clay minerals, the thermal stability and solvent resistance of natural betanin were obviously enhanced. Due to the difference in the structure of palygorskite and halloysite, betanin was mainly adsorbed on the outer surface of palygorskite or halloysite through hydrogen-bond interaction, but also part of them also entered into the lumen of Hal via electrostatic interaction. Compared with palygorskite, hybrid materials prepared with halloysite exhibited the better color performance, heating stability and solvent resistance due to the high loading content of betanin and shielding effect of lumen of halloysite.

Paleo-inspired Systems: Durability, Sustainability, and Remarkable Properties

The process of mimicking properties of specific interest (such as mechanical, optical, and structural) observed in ancient and historical systems is designated here as paleo-inspiration. For instance, recovery in archaeology or paleontology identifies materials that are a posteriori extremely resilient to alteration. All the more encouraging is that many ancient materials were synthesized in soft chemical ways, often using low-energy resources and sometimes rudimentary manufacturing equipment. In this Minireview, ancient systems are presented as a source of inspiration for innovative material design in the Anthropocene.

Eco-dyeing with biocolourant based on natural compounds

Biomass pigments have been regarded as promising alternatives to conventional synthetic dyestuffs for the development of sustainable and clean dyeing. This investigation focused on in situ dyeing of fabrics with biopigments derived from tea polyphenols via non-enzymatic browning reaction. The average particle size of dyed residual liquor with natural tea polyphenol was 717.0 nm (ranging from 615.5 to 811.2 nm), and the Integ value of dyed wool fabrics was the greatest compared to those of counterparts. In addition, the Integ values of dyed fabrics with residual liquor were much bigger than those with the first reaction solutions when dyed by identical dyeing liquor. As a result, the dyeing process could be carried out many times because the concentration of the residual liquor was relatively superior. All dyed fabrics acquired admirable rubbing as well as washing fastness, and the relevant dyeing mechanism has been analysed in the paper.

Functional Nanocomposites Based on Fibrous Clays

This chapter is focused on functional nanocomposites based on the use of the microfibrous clays sepiolite and palygorskite as efficient fillers for diverse types of polymer matrices, from typical thermoplastics to biopolymers. The main features that govern the interaction between the silicates and the polymer matrix are discussed. The introduction addresses the structural and textural features of the fibrous silicates, as well as the possible synthetic approaches to increase the compatibility of these nanofillers with the polymeric matrix. Additionally, these clays can be easily functionalized through their surface silanol groups based on chemical reactions or by anchoring of nanoparticles. This allows for the preparation of a wide variety of functional polymer–clay nanocomposites. Thereafter, some relevant examples of nanocomposites derived from conventional polymers are reported, as well as of those based on polymers that exhibit electrical conductivity. Lastly, selected works employing sepiolite or palygorskite as fillers in polymeric matrixes of natural origin are discussed, showing the wide application of these resulting nanocomposites as bioplastics, as well as in biomedicine, environmental remediation and the development of sensor devices.

From spent dye-loaded palygorskite to a multifunctional palygorskite/carbon/Ag nanocomposite

Palygorskite (PAL) has been widely used for adsorption removal of dyes from wastewater, but the dye-loaded PAL is usually discharged as solid waste because it is hardly regeneratable by conventional elution processes.