Polydimethylsiloxane enabled triple-action water-resistant coating with desirable relaxation rate in clear aligner

Clear aligners undergo rapid stress relaxation in warm, moist oral environments, compromising therapeutic effectiveness and longevity of treatment. To develop an innovative multilayer composite material with improved stability and reduced stress release, we have engineered an innovative coating characterized by the surface aggregation of polydimethylsiloxane (PDMS), which imparts a pronounced hydrophobic effect. In addition, the chemically and physically cross-linked structure of the coating reduces the free volume created by molecular chain rearrangement owing to the presence of water molecules, thereby minimizing water penetration into the coating. Concurrently, the coating's internal structure is enriched with numerous polar functional groups to capture water molecules that penetrate into the inside of the coating. Through combination of these mechanisms, water molecules are effectively sequestered, thereby impeding their penetration into the polyethylene terephthalate glycol (PETG) substrate. The impact of the polydimethylsiloxane content on the triple-action water-resistance mechanisms was thoroughly examined using attenuated total reflection (ATR)-Fourier transform infrared (FTIR), water absorption rate, water swelling rate, and X-ray photoelectron spectroscopy. The low surface energy cross-linked polyurethane coating is applied to the polyethylene terephthalate glycol (PETG) substrate to create a novel composite material with specific mechanical properties and reduced stress relaxation. The composite material remains stable in simulated oral environment with linear swelling rate of 0.58 % upon water absorption. Additionally, the stress release rate of the composite material within 336 h is notably lower (23.64 %) than that of PETG (62.29 %).

Fabrication and Characterization of Biopolymers Using Polyvinyl Alcohol and Cardanol-Based Polyols

Biodegradable polymers are getting attention as renewable alternatives to petroleum-based plastics due to their environmental benefits. However, improving their physical properties remains challenging. In this work, biodegradable biopolymers (PVA-PCD) were fabricated by chemically crosslinking petroleum-based polyvinyl alcohol (PVA) with biomass-derived cardanol-based polyols (PCD). Biopolymers were characterized using various techniques, including Fourier-transform infrared (FT-IR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), and swelling tests. Cardanol, the raw material, was converted into polyols via epoxidation followed by hydroxylation. FT-IR analysis confirmed that PVA-PCD biopolymers were crosslinked between the hydroxyl groups of PVA and PCD and the aldehydes of crosslinker glutaraldehyde (GLU), accompanied by the formation of acetal groups with ether bridges. XRD showed that the crystallinity of crosslinked polymers decreased, indicating that crosslinking occurs disorderly. TGA exhibited that GLU significantly improved the thermal stabilities of PVA and PCD-PVA polymers, as evidenced by increased decomposition temperatures. On the other hand, the effect of PVA/PCD ratios was minor on biopolymers' thermal stabilities. Swelling tests revealed that increased crosslinking density decreased the swelling ratio, suggesting that PVA-PCD biopolymers become more hydrophobic with high brittleness, high strength, and low swelling capacity. In summary, this study demonstrates that PVA-PCD biopolymers fabricated from biomass-derived materials have potential for various applications, such as biodegradable materials and sustainable packaging.

Tartaric Acid Cross-Linking Polyvinyl Alcohol as Degradable Separators for Rechargeable Lithium Ion Batteries

The escalating focus on environmental concerns and the swift advancement of eco-friendly biodegradable batteries raises a pressing demand for enhanced material design in the battery field. The traditional polypropylene (PP) that is monopolistically utilized in the commercial LIBs is hard to recycle. In this work, we prepare a novel water degradable separators via the cross-linking of polyvinyl alcohol (PVA) and dibasic acid (tartaric acid, TA). Through the integration of non-solvent liquid-phase separation, we successfully produced a thermally stable PVA-TA membrane with tunable thickness and a high level of porosity. These specially engineered PVA-TA separators were implemented in LiFePO4 (LFP)|separator|Li cells, resulting in superior multiplicative performance and achieving a capacity of 88 mAh g-1 under 5 C. Additionally, the straightforward small molecule cross-linking technique significantly reduced the crystalline region of the polymer, thereby enhancing ionic conductivity. Notably, after cycling, the PVA-TA separators can be easily dissolved in 95 °C hot water, enabling its reutilization for the production of new PVA-TA separators. Therefore, this work introduces a novel concept to design green and sustainable separators for recyclable lithium batteries.

Silver nanoparticles loaded triple-layered cellulose-acetate based multifunctional dressing for wound healing

Chronic wounds present considerable challenges which delay their effective healing. Currently, there are several biomaterial-based wound dressings available for healing diverse wound types. However, most of commercial wound dressings are too expensive to be affordable to the patients belonging to the middle and lower socioeconomic strata of the society. Thus, in this investigation affordable triple layered nanofibrous bandages were fabricated using the layer-by-layer approach. Here, the topmost layer comprised of a hydrophilic poly vinyl alcohol layer, cross-linked with citric acid. The middle layer comprising of cellulose acetate was loaded with silver nanoparticles as an antibacterial agent, while the lowermost layer was fabricated using hydrophobic polycaprolactone. The triple-layered nanofibrous bandages having a nano-topography, exhibited a smooth, uniform and bead-free morphology, with the nanofiber diameter ranging between 200 and 300 nm. The nanofibers demonstrated excellent wettability, slow in vitro degradation, controlled release of nano‑silver and potent antibacterial activity against Gram-negative (E.coli) and Gram-positive (S. aureus) bacteria. The fabricated bandages had excellent mechanical strength upto 12.72 ± 0.790 M. Pa, which was suitable for biomedical and tissue engineering applications. The bandage demonstrated excellent in vitro hemocompatibility and biocompatibility. In vivo excisional wound contraction, along with H and E and Masson's Trichrome staining further confirmed the potential of the nanofibrous bandage for full-thickness wound healing. Pre-clinical investigations thus indicated the possibility of further evaluating the triple-layered nanofibrous dressing in clinical settings.

Cross-linking impacts the physical properties of mycelium leather alternatives by targeting hydroxyl groups of polysaccharides and amino groups of proteins

Cross-linking, also called tanning, improves mechanical properties of leather and also increases its enzymatic and thermal stability. As a final product, leather has an ultimate tensile strength (σ) of 8-25 MPa and an elongation at break (ε) of >30 %. Mycelium-based materials are a sustainable alternative to leather. Here, the effect of cross-linkers was assessed on mechanical properties of Schizophyllum commune mycelium sheets. To this end, glutaraldehyde and N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide (EDC) were used as well as extracts of Ligustrum vulgare leaves, and bark of Acacia mearnsii and Caesalpinia spinosa. Untanned sheets had a σ of 7.8 MPa and an ε of 15.2 %, while the best overall combination of strength and elasticity was obtained with 0.1 % glutaraldehyde with a σ of 11.1 MPa and an ε of 14.6 %. Cross-linking also increased enzymatic stability and reduced mycelial water absorption but did not result in increased thermal stability. Fourier transform infrared spectroscopy (FTIR), 1D nuclear magnetic resonance spectroscopy (NMR), and amino acid analysis showed that glutaraldehyde bound both protein amino groups and polysaccharide hydroxyl groups by forming Schiff bases and acetals, respectively. Together, synthetic and vegetable cross-linkers can be used to obtain mycelium materials with leather-like tensile strength.

3D printing of polyvinyl alcohol hydrogels enabled by aqueous two-phase system

The synthesis of PVA hydrogels (PVA-Hy) requires a highly basic environment (e.g., an aqueous solution of sodium hydroxide, NaOH, 14% w/w, 4.2 M), but the rapid crosslinking of PVA due to high pH makes it challenging to perform layer-by-layer three-dimensional (3D) printing of PVA-Hy. This work demonstrated 3D printing of PVA-Hy in moderate alkaline conditions (e.g., NaOH, 1% w/w, 0.3 M) assisted by aqueous two-phase system (ATPS). Salting out of PVA to form ATPS allowed temporal shape retention of a 3D-printed PVA structure while it was physically crosslinked in moderate alkaline conditions. Crucially, the layer-to-layer adhesion of PVA was facilitated by delayed crosslinking of PVA that required additional reaction time and overlapping between the layers. To verify this principle, we studied the feasibility of direct ink write (DIW) 3D printing of PVA inks (5-25% w/w, μ = 0.1-20 Pa s, and MW = 22 000 and 74 800) in aqueous embedding media offering three distinct chemical environments: (1) salts for salting out (e.g., Na2SO4), (2) alkali hydroxides for physical crosslinking (e.g., NaOH), and (3) a mixture of salt and alkali hydroxide. Our study suggested the feasibility of 3D-printed PVA-Hy using the mixture of salt and alkali hydroxide, demonstrating a unique concept of embedded 3D printing enabled by ATPS for temporary stabilization of the printed structures to facilitate 3D fabrication.

Development of Composite Nanostructured Electrodes for Water Desalination via Membrane Capacitive Deionization

Novel two-layer nanostructured electrodes are successfully prepared for their application in membrane capacitive deionization (MCDI) processes. Nanostructured carbonaceous materials such as graphene oxide (GO) and carbon nanotubes (CNTs), as well as activated carbon (AC) are dispersed in a solution of poly(vinyl alcohol) (PVA), mixed with polyacrylic acid (PAA) or polydimethyldiallylammonium chloride (PDMDAAC), and subsequently cast on the top surface of an AC-based modified graphite electrode to form a thin composite layer that is cross-linked with glutaraldehyde (GA). Cyclic voltammetry (CV) is performed to investigate the electrochemical properties of the composite electrodes and desalination experiments are conducted in batch mode using a MCDI unit cell to investigate the effects of i) the nanostructured carbonaceous material, ii) its concentration in the polymer blend, and iii) the molecular weight of the polymers on the desalination efficiency of the system. Comparative studies with commercial membranes are performed proving that the composite nanostructured electrodes are more efficient in salt removal. The improved performance of the composite electrodes is attributed to the ion exchange properties of the selected polymers and the increased specific capacitance of the nanostructured carbonaceous materials. This research paves the way for wider application of MCDI in water desalination.

Fabrication of Robust Carbon Dots Containing Coatings with UV-Shielding, Light Conversion, and Antifogging Multiple Functions

Although a wide variety of single-function coatings have been successfully developed, the integration of multiple functions onto a single coating has remained an immense challenge in the field. Here, we report a simple room-temperature fabrication of robust coatings with UV-shielding, light conversion, and antifogging functionalities. The addition of glutaraldehyde (GA) molecular cross-linker and carbon dot (CD) nanocross-linker with light conversion function to poly(vinyl alcohol) (PVA) resulted in the formation of robust spatial structures of coatings. The fluorescence intensity tests demonstrated that the coatings had an excellent ability to absorb and convert ultraviolet light into blue-violet light. Both cold-warm and hot-vapor tests showed that the coatings had excellent antifogging performance. To our surprise, no creases were observed after coatings were immersed in water for 1 month, indicating that these are much stronger than those reported so far. The 8H pencil hardness and wear resistance attested to their excellent mechanical properties. The current preparation method can be operated at ambient temperature and is not restricted by the substrate type and shape. Therefore, it may also expand the possibilities for future applications of coatings for glass windows, optical microscopes, eyeglasses, agricultural greenhouses, and so on.

Biodegradable Packaging Based on Poly(vinyl Alcohol) and Carboxymethyl Cellulose Films Incorporated with Ascorbic Acid for Food Packaging Applications

Petroleum-based plastics are used as packaging materials because of their low cost and high availability; however, continuous use of these nondegradable materials especially in the food industry has led to environmental pollution. The present study aimed to synthesize antibacterial and biodegradable films based on natural biopolymers carboxymethyl cellulose (CMC), poly(vinyl alcohol) (PVA), and ascorbic acid (AA) cross-linked in the presence of glutaraldehyde (GA). The films were synthesized in two different concentrations, 60PVA:40CMC:AA and 70PVA:30CMC:AA with a fixed amount of AA. Films with smooth texture and overall uniform thickness were obtained. Fourier transform infrared spectroscopy (FTIR) confirmed the cross-linking between the aldehyde group of GA and hydroxyl of PVA through detection of acetal and ether bridges. The synthesized films were thermally stable in the temperature range of 180-300 °C; however, 70PVA:30CMC:AA showed higher weight loss in this range as compared to the 60PVA:40CMC:AA film. Soil burial test demonstrated that the 60PVA:40CMC:AA film was more degradable (71% at day 15) as compared to the 70PVA:30CMC:AA film (65% at day 15). The films exhibited excellent antimicrobial activity against Gram-positive staphylococcus aureus(inhibition zone of 21 mm) and Gram-negative Escherichia coli (inhibition zone of 15 mm). In comparison, the 60PVA:40CMC:AA film showed better results in terms of high mechanical strength, uniform morphology, higher soil burial degradation, and lower water vapor transmission rate. Therefore, the prepared film could be used as a promising candidate in the food packaging industry.

Chitin Nanofibrils from Fungi for Hierarchical Gel Polymer Electrolytes for Transient Zinc-Ion Batteries with Stable Zn Electrodeposition

Rechargeable batteries play an integral role toward carbon neutrality. Environmentally sustainable batteries should consider the trade-offs between material renewability, processability, thermo-mechanical and electrochemical performance, as well as transiency. To address this dilemma, we follow circular economy principles to fabricate fungal chitin nanofibril (ChNF) gel polymer electrolytes (GPEs) for zinc-ion batteries. These biocolloids are physically entangled into hierarchical hydrogels with specific surface areas of 49.5 m2 ·g-1 . Ionic conductivities of 54.1 mS·cm-1 and a Zn2+ transference number of 0.468 are reached, outperforming conventional non-renewable/non-biodegradable glass microfibre separator-liquid electrolyte pairs. Enabled by its mechanically elastic properties and large water uptake, a stable Zn electrodeposition in symmetric Zn|Zn configuration with a lifespan above 600 h at 9.5 mA·cm-2 is obtained. At 100 mA·g-1 , the discharge capacity of Zn/α-MnO2 full cells increases above 500 cycles when replacing glass microfiber separators with ChNF GPEs, while the rate performance remains comparable to glass microfiber separators. To make the battery completely transient, the metallic current collectors are replaced by biodegradable polyester/carbon black composites undergoing degradation in water at 70 °C. This work demonstrates the applicability of bio-based materials to fabricate green and electrochemically competitive batteries with potential applications in sustainable portable electronics, or biomedicine.

A facile alternative strategy of upcycling mixed plastic waste into vitrimers

Chemical depolymerization has been identified as a promising approach towards recycling of plastic waste. However, complete depolymerization may be energy intensive with complications in purification. In this work, we have demonstrated upcycling of mixed plastic waste comprising a mixture of polyester, polyamide, and polyurethane through a reprocessable vitrimer of the depolymerized oligomers. Using poly(ethylene terephthalate) (PET) as a model polymer, we first demonstrated partial controlled depolymerization, using glycerol as a cleaving agent, to obtain branched PET oligomers. Recovered PET (RPET) oligomer was then used as a feedstock to produce a crosslinked yet reprocessable vitrimer (vRPET) despite having a wide molecular weight distribution using a solventless melt processing approach. Crosslinking and dynamic interactions were observed through rheology and dynamic mechanical analysis (DMA). Tensile mechanical studies showed no noticeable decrease in mechanical strength over multiple repeated melt processing cycles. Consequently, we have clearly demonstrated the applicability of the above method to upcycle mixed plastic wastes into vitrimers and reprocessable composites. This work also afforded insights into a potentially viable alternative route for utilization of depolymerized plastic/mixed plastic waste into crosslinked vitrimer resins manifesting excellent mechanical strength, while remaining reprocessable/ recyclable for cyclical lifetime use.

Argon Plasma Jet-Treated Poly (Vinyl Alcohol)/Chitosan and PEG 400 Plus Mangifera indica Leaf Extract for Electrospun Nanofiber Membranes: In Vitro Study

The wound-healing process can be disrupted at any stage due to various internal and external factors. The inflammatory stage of the process plays a vital role in determining the outcome of the wound. Prolonged inflammation due to bacterial infection can lead to tissue damage, slow healing, and complications. Wound dressings made using materials such as poly (vinyl alcohol) (PVA), chitosan (CS), and poly (ethylene glycol) (PEG) with Mangifera extract (ME) added can help reduce infection and inflammation, creating a conducive environment for faster healing. However, creating the electrospun membrane is challenging due to balancing various forces such as rheological behavior, conductivity, and surface tension. To improve the electrospinnability of the polymer solution, an atmospheric pressure plasma jet can induce chemistry in the solution and increase the polarity of the solvent. Thus, this research aims to investigate the effect of plasma treatment on PVA, CS, and PEG polymer solutions and fabricate ME wound dressing via electrospinning. The results indicated that increasing plasma treatment time increased the viscosity of the polymer solution, from 269 mPa∙to 331 mPa∙s after 60 min, and led to an increase in conductivity from 298 mS/cm to 330 mS/cm and an increase in nanofiber diameter from 90 ± 40 nm to 109 ± 49 nm. Incorporating 1% mangiferin extract into an electrospun nanofiber membrane has been found to increase the inhibition rates of Escherichia coli and Staphylococcus aureus by 29.2% and 61.2%, respectively. Additionally, the fiber diameter decreases when compared with the electrospun nanofiber membrane without ME. Our findings demonstrate that electrospun nanofiber membrane with ME has anti-infective properties and can promote faster wound healing.

Preparation and Evaluation of Nanofibrous and Film-Structured Ciprofloxacin Hydrochloride Inserts for Sustained Ocular Delivery: Pharmacokinetic Study in Rabbit’s Eye

Conventional anti-infective eye drops are the most common forms of drugs prescribed for the management of topical ocular infections. Despite their convenience, topical eye drops face multiple challenges, including limited bioavailability and repetitive administration. The present study aimed to prepare, evaluate, and compare film-structured and nanofibrous ocular inserts using biocompatible polymers of polyvinyl alcohol (PVA) and polycaprolactone (PCL) to achieve sustained ciprofloxacin Hydrochloride (CIP) delivery. The nanofibrous formulations were prepared by electrospinning and glutaraldehyde crosslinking while the film formulation was prepared by solvent casting. Nanofibrous inserts had mean diameters in the range 330–450 nm. Both film and nanofibrous inserts were strong, although the nanofibers had higher flexibility. In vitro antibacterial efficacy against Staphylococcus aureus and Escherichia coli was observed for all formulations and cell viability of more than 70% confirmed their non-toxicity. In vitro release studies showed prolonged release of 2 days for the film and 5 days for the nanofibers compared with a 10-h release of CIP from the eye drop. Pharmacokinetic studies of rabbits’ eyes showed 4.5–5-folds higher AUC for the nanofiber formulations compared with the eye drop. Thus, prolonged-release film-structured and nanofibrous inserts are suitable carriers for ocular delivery of CIP.

Optimization of electrospun CQDs-Fe3O4-RE loaded PVA-cellulose nanofibrils via central composite design for wound dressing applications: Kinetics and in vitro release study

Wound skin infections can cause significant morbidity and even mortality. Cellulose nanofibrils (CNFs) are a type of nano cellulose that have reached notable attention due to their inimitable properties. In this study, in order to prepare a novel wound dressing, CNFs are composited with poly (vinyl alcohol) (PVA) to enhance mechanical properties and increase cell proliferation and migration. Also, carbon quantum dots (CQDs)- Fe₃O₄ was introduced as a novel antibacterial, and rosemary extract (RE) was composited with this to reduce its cell toxicity. PVA - CNFs/ CQDs- Fe₃O₄- RE nanofiber was prepared using the electrospinning method. Then, to maximize tensile strength, total elongation, and percentage swelling of PVA - CNFs/ CQDs- Fe₃O₄- RE electrospun nanofiber, parameters of crosslinking duration and the concentration of CQDs- Fe₃O₄-RE were optimized employing central composite design, and optimized electrospun nanofiber (OEN) as a novel wound dressing was prepared. Results exhibited, the high antibacterial properties of CQDs-Fe₃O₄-RE. Also, CNFs and CQDs- Fe₃O₄-RE increased the tensile strength of OEN. Moreover, CNFs and RE reduce wound area percentages and increase the percentage of cell viability, respectively. Therefore, OEN was introduced as a suitable wound dressing due to its appropriate surface roughness, mechanical properties, WVTR, biodegradation, prolonged release, non-toxicity, and high cell proliferation and migration ability.

Effect of Sulfonated Inorganic Additives Incorporated Hybrid Composite Polymer Membranes on Enhancing the Performance of Microbial Fuel Cells

Microbial fuel cells (MFCs) provide considerable benefits in the energy and environmental sectors for producing bioenergy during bioremediation. Recently, new hybrid composite membranes with inorganic additives have been considered for MFC application to replace the high cost of commercial membranes and improve the performances of cost-effective polymers, such as MFC membranes. The homogeneous impregnation of inorganic additives in the polymer matrix effectively enhances the physicochemical, thermal, and mechanical stabilities and prevents the crossover of substrate and oxygen through polymer membranes. However, the typical incorporation of inorganic additives in the membrane decreases the proton conductivity and ion exchange capacity. In this critical review, we systematically explained the impact of sulfonated inorganic additives (such as (sulfonated) sSiO₂, sTiO₂, sFe₃O₄, and s-graphene oxide) on different kinds of hybrid polymers (such as PFSA, PVDF, SPEEK, SPAEK, SSEBS, and PBI) membrane for MFC applications. The membrane mechanism and interaction between the polymers and sulfonated inorganic additives are explained. The impact of sulfonated inorganic additives on polymer membranes is highlighted based on the physicochemical, mechanical, and MFC performances. The core understandings in this review can provide vital direction for future development.

A novel transdermal delivery route for energy supplements: Electrospun chitosan/polyvinyl alcohol nanofiber patches loaded with vitamin B12

Nanofibrous patches have attracted much attention as a solution to resolve drug delivery challenges. In this study, vitamin B₁₂- loaded polyvinyl alcohol (PVA)/chitosan (Cs) nanofiber patch (NFP) was electrospun and cross-linked by glutaraldehyde (GA). The physicochemical properties of the nanofiber patches were assessed by morphological studies, FTIR analysis, hydrophilicity test, mechanical tests, and in-vitro evaluations including biodegradability, MTT assay, and cumulative release test of vitamin. In-vivo studies were also carried out by measuring vitamin B₁₂ levels in the bloodstream and conducting histopathology studies on the animal models. The results showed that the mean diameter of Cs/PVA/B₁₂ and cross-linked patch were approximately 207 and 256 nm, respectively. Cross-linking of NFP led to the lower, slower, and more continuous release of the vitamin with a slight decrease in biodegradability, and an increase in the mechanical properties of the nanofiber patches. Furthermore, the cytocompatibility assay, MTT, and in vivo results revealed no cytotoxicity of Cs/PVA/B₁₂ NFP towards L929 cell line. No lesion or tissue damage was observed in the skin tissue of the animal models wearing these skin patches. Therefore, B₁₂-loaded NFP can be introduced as a potential candidate for commercial transdermal routes.

Crosslinked poly (vinyl alcohol) composite reinforced with tunicate, wood, and hybrid cellulose nanocrystals: Comparative physicochemical, thermal, and mechanical properties

The development of sustainable and biodegradable composites has gained increasing attention in recent years. Effective interaction and adhesion between polymers and fillers are crucial. In this study, the effect of different aspect ratios of cellulose nanocrystals (CNCs) and their hybrid within a crosslinked poly (vinyl alcohol) (PVA) nanocomposite has been investigated to develop biodegradable materials. The physicochemical, thermal, and mechanical properties of the specimens have been studied. SEM images indicate that the addition of CNC reduced the porosity of the films. The XPS results confirmed the significant formation of covalent bonds for all composites except those reinforced with wood-CNC, which showed a lower amount of crosslinking and CC formation. EDS maps reveals that the dispersity of the CNCs could be different depending on the aspect ratio of the CNCs. Results from the solubility in water (SW) tests indicated that the use of hybrid-CNC in a crosslinked system decreased the SW significantly. The crosslinking and addition of CNC to the PVA composite led to improved mechanical properties. Elongation at break (EB) decreased significantly for the crosslinked hybrid-CNC nanocomposite. Overall, the results of this study indicate that the aspect ratio of CNCs as fillers in nanocomposites may contribute to their physicochemical, mechanical, and thermal properties for the development of biodegradable materials.

Engineering dual-stimuli responsive poly(vinyl alcohol) nanofibrous membranes for cancer treatment by magnetic hyperthermia

The development of new cancer treatment options, such as multifunctional devices, allows for a more personalized treatment, avoiding the known severe side effects of conventional options. In this context, on-demand drug delivery systems can actively control the rate of drug release offering a precise control of treatment. Magnetically and thermally controlled drug delivery systems have been explored as on-demand devices to treat chronic diseases and cancer tumors. In the present work, dual-stimuli responsive systems were developed by incorporating Fe₃O₄ magnetic nanoparticles (NPs) and poly(N-isopropylacrylamide) (PNIPAAm) microgels into electrospun polymeric fibers for application in cancer treatment. First, Fe₃O₄ NPs with an average diameter of 8 nm were synthesized by chemical precipitation technique and stabilized with dimercaptosuccinic acid (DMSA) or oleic acid (OA). PNIPAAm microgels were synthesized by surfactant-free emulsion polymerization (SFEP). Poly(vinyl alcohol) (PVA) was used as a fiber template originating fibers with an average diameter of 179 ± 14 nm. Stress tests of the membranes showed that incorporating both microgels and Fe₃O₄ NPs in electrospun fibers increases their Young's modulus. Swelling assays indicate that PVA membranes have a swelling ratio of around 3.4 (g/g) and that the presence of microgels does not affect its swelling ability. However, with the incorporation of Fe₃O₄ NPs, the swelling ratio of the membranes decreases. Magnetic hyperthermia assays show that a higher concentration of NPs leads to a higher heating ability. The composite membrane with the most promising results is the one incorporated with DMSA-coated NPs, since it shows the highest temperature variation, 5.1 °C. To assess the membranes biocompatibility and ability to promote cell proliferation, indirect and direct contact cell viability assays were performed, as well as cell adhesion assays. Following an extract method viability assay, all membrane designs did not reveal cytotoxic effects on dermal fibroblasts and melanoma cancer cells, after 48 h exposure and support long-term viability. The present work demonstrates the potential of dual-stimuli composite membranes for magnetic hyperthermia and may in the future be used as an alternative cancer treatment particularly in anatomically reachable solid tumors.

Engineered Wood with Hierarchically Tunable Microchannels toward Efficient Solar Vapor Generation

Wood-based solar steam evaporators have been attracting increasing interest due to their great potential for addressing water scarcity by utilizing sustainable materials and energy. However, engineering a 3D porous structure within the wood lumens and its effect on solar vapor evaporation have not yet been well explored. Here, a natural wood-based solar evaporator with hierarchical pores is fabricated by assembling polyvinyl alcohol within the lumens through an ice-templating approach. The polyvinyl alcohol porous network is engineered from vertically aligned microchannels to dendritically bridged pores with a narrowed size of a few micrometers and significantly increased surface area. Although the formation of plenty of microscopic channels increases the capillary force in comparison to the native wood lumen, the morphology change induces a high tortuosity factor of the porous structure, resulting in a reduced water transportation rate as well as an increased contact angle. On the other hand, the high surface area of the engineered wood lumens and the good hydrophilicity of the filled polyvinyl alcohol improve the ratio of the formed intermediate water, contributing to reduced vaporization enthalpy. Consequently, by using polydopamine as the photothermal material, the hierarchically structured polyvinyl alcohol-wood solar evaporator exhibits an evaporation rate of 1.6 kg m^-2 h^-1 under 1 sun irradiation and a high solar evaporation efficiency of up to 107%, which are higher than most of the reported natural-wood-based solar evaporators. Moreover, by exploring the correlation between porous morphology and performance, it has been found that the polyvinyl alcohol-wood composite not only presents an inexpensive and sustainable evaporator but also provides guidelines for designing high-performance steam generation devices.

Sporopollenin-inspired design and synthesis of robust polymeric materials

Sporopollenin is a mechanically robust and chemically inert biopolymer that constitutes the outer protective exine layer of plant spores and pollen grains. Recent investigation of the molecular structure of pine sporopollenin revealed unique monomeric units and inter-unit linkages distinct from other previously known biopolymers, which could be harnessed for new material design. Herein, we report the bioinspired synthesis of a series of sporopollenin analogues. This exercise confirms large portions of our previously proposed pine sporopollenin structural model, while the measured chemical, thermal, and mechanical properties of the synthetic sporopollenins constitute favorable attributes of a new kind of robust material. This study explores a new design framework of robust materials inspired by natural sporopollenins, and provides insights and reagents for future elucidation and engineering of sporopollenin biosynthesis in plants.

Evaluation of Structural and Optical Properties of Graphene Oxide-Polyvinyl Alcohol Thin Film and Its Potential for Pesticide Detection Using an Optical Method

In the present work, graphene oxide (GO)–polyvinyl alcohol (PVA) composites thin film has been successfully synthesized and prepared by spin coating techniques. Then, the properties and morphology of the samples were characterized using Fourier transform infrared spectroscopy (FTIR), ultraviolet-visible spectroscopy (UV-Vis), and atomic force microscopy (AFM). Experimental FTIR results for GO–PVA thin film demonstrated the existence of important functional groups such as -CH2 stretching, C=O stretching, and O–H stretching. Furthermore, UV-Vis analysis indicated that the GO–PVA thin film had the highest absorbance that can be observed at wavelengths ranging from 200 to 500 nm with a band gap of 4.082 eV. The surface morphology of the GO–PVA thin film indicated the thickness increased when in contact with carbaryl. The incorporation of the GO–PVA thin film with an optical method based on the surface plasmon resonance (SPR) phenomenon demonstrated a positive response for the detection of carbaryl pesticide as low as 0.02 ppb. This study has successfully proposed that the GO–PVA thin film has high potential as a polymer nanomaterial-based SPR sensor for pesticide detection.

Removal of the Anionic Dye Congo Red from an Aqueous Solution Using a Crosslinked Poly(vinyl alcohol)-ZnO-Vitamin M Nanocomposite Film: A Study of the Recent Concerns about Nonlinear and Linear Forms of Isotherms and Kinetics

This paper deals with the preparation, characterization, and application of a crosslinked poly(vinyl alcohol)/ZnO-vitamin M (PVA/ZnO-VM) nanocomposite film for the removal of Congo red (CR) from an aqueous solution. The characterization of a crosslinked PVA/ZnO-VM nanocomposite film showed that the structure became more regular and also the surface morphology appeared smooth in comparison with pure PVA. The obtained data from Brunauer-Emmett-Teller (BET) proved the mesoporous structure for this nanocomposite film. Several effective factors were examined for the adsorption ability of the nanocomposite film, including solution pH (2-10), sorbent amount (0.02-0.08 g), contact time (3-240 min), initial concentration of the adsorbate (30-300 mg·L^-1), and temperature (318-358 K). The optimal conditions are as follows: pH = 10, adsorbent amount = 0.06 g, and C₀ = 200 mg·L^-1. The removal efficiency of the nanocomposite film was 92% after 4 h at the ambient temperature. To interpret the adsorption process, nonlinear and linear forms of kinetic and isotherm models were considered. The obtained data followed nonlinear pseudo-second-order and linear Langmuir isotherm models, which indicated the monolayer formation of CR over the crosslinked PVA/ZnO-VM nanocomposite film with the maximum adsorption capacity of about 56.49 mg·g^-1. Also, the adsorption process of CR by the crosslinked PVA/ZnO-VM nanocomposite film is a spontaneous and exothermic reaction.

Poly(vinyl alcohol) membranes-inspired heterocyclic compounds for different applications: synthesis and characterization

Chemical modification of poly(vinyl alcohol) (PVA) with different monomers is a convention method for the development of its properties. In this study, the new multifunctional membranes (PVA-A)1–3, (PVA-P)1–3, (PVA-AG) and (PVA-PG) were designed and synthesized by the reaction of PVA with heterocyclic compounds [N,Nʹ-bi-α-azido succinimide (A), N-phthalimido-α-azido succinimide (P)] and using glutaraldehyde (G) as cross-linker, respectively. The new membranes were characterized by FT-IR, TGA, SEM and X-ray diffraction. The swelling behavior of the membranes showed that membranes (PVA-P)1–3 exhibited the highest swelling capacity in different solvents. Their antibacterial against (Gram-negative), (Gram-positive) bacteria, and in vitro drug loading and release activities were evaluated. Additionally, metal ions adsorption capacity for copper, cobalt and mercury ions was studied. (PVA-AG) membrane performed the highest inhibitory effect to E. coli, Proteus, S. aureus and B. subtilis bacteria reached 22.9, 25.46, 24.9 and 30.56, respectively. Furthermore, in vitro controlled loading and release of lidocaine, (PVA-A)1 membrane revealed remarkable ability reached 57.37% and 94.59%, respectively. Hydrogel (PVA-AG) showed the highest metal ions (copper, cobalt and mercury) uptake efficiency (64.5, 69.5 and 73), respectively. Based on results, the prepared membranes can be suggested as promising agents for antibacterial, drug delivery systems and metal ions removal from aqueous medium.

Swelling-Resistant, Crosslinked Polyvinyl Alcohol Membranes with High ZIF-8 Nanofiller Loadings as Effective Solid Electrolytes for Alkaline Fuel Cells

The present work investigates the direct mixing of aqueous zeolitic imidazolate framework-8 (ZIF-8) suspension into a polyvinyl alcohol (PVA) and crosslinked with glutaraldehyde (GA) to form swelling-resistant, mechanically robust and conductivity retentive composite membranes. This drying-free nanofiller incorporation method enhances the homogeneous ZIF-8 distributions in the PVA/ZIF-8/GA composites to overcome the nanofiller aggregation problem in the mixed matrix membranes. Various ZIF-8 concentrations (25.4, 40.5 and 45.4 wt.%) are used to study the suitability of the resulting GA-crosslinked composites for direct alkaline methanol fuel cell (DAMFC). Surface morphological analysis confirmed homogeneous ZIF-8 particle distribution in the GA-crosslinked composites with a defect- and crack-free structure. The increased ionic conductivity (21% higher than the ZIF-free base material) and suppressed alcohol permeability (94% lower from the base material) of PVA/40.5%ZIF-8/GA resulted in the highest selectivity among the prepared composites. In addition, the GA-crosslinked composites’ selectivity increased to 1.5−2 times that of those without crosslink. Moreover, the ZIF-8 nanofillers improved the mechanical strength and alkaline stability of the composites. This was due to the negligible volume swelling ratio (<1.4%) of high (>40%) ZIF-8-loaded composites. After 168 h of alkaline treatment, the PVA/40.5%ZIF-8/GA composite had almost negligible ionic conductivity loss (0.19%) compared with the initial material. The maximum power density (Pmax) of PVA/40.5%ZIF-8/GA composite was 190.5 mW cm−2 at 60 °C, an increase of 181% from the PVA/GA membrane. Moreover, the Pmax of PVA/40.5%ZIF-8/GA was 10% higher than that without GA crosslinking. These swelling-resistant and stable solid electrolytes are promising in alkaline fuel cell applications.

Comparison of dialdehyde polysaccharides as crosslinkers for hydrogels: The case of poly(vinyl alcohol)

A little is known about the link between the macromolecular architecture of dialdehyde polysaccharides (DAPs), their crosslinking capabilities, and the properties of resulting hydrogels. Here, DAPs based on cellulose, dextrin, dextran, and hyaluronate were compared as crosslinkers for poly(vinyl alcohol), PVA. The swelling, network parameters, viscoelastic properties, porosity, and cytotoxicity of PVA/DAP hydrogels were investigated concerning the crosslinker structure, molecular weight, aldehyde group density per macromolecule, and the size of spontaneously formed crosslinker nano-assemblies. Generally, crosslinkers based on linear polysaccharides (cellulose, hyaluronate) performed more reliably, while the presence of branching could be both beneficial (dextran) but also detrimental (dextrin) at lower crosslinker concentrations. For example, the hydrogel swelling differed by up to one-third (600 vs. 400%) and storage modulus even by up to one half (~7000 vs. ~3500 Pa) depending on crosslinker structure and properties. These differences were rationalized by variances in crosslinking modes derived based on obtained data.

Lignocellulose Nanofibre Obtained from Agricultural Wastes of Tomato, Pepper and Eggplants Improves the Performance of Films of Polyvinyl Alcohol (PVA) for Food Packaging

Films formulated with polyvinyl alcohol (PVA) (synthetic biopolymer) were reinforced with lignocellulose nanofibres (LCNF) from residues of vegetable production (natural biopolymer). The LCNF were obtained by mechanical and chemical pre-treatment by 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO) and added to the polyvinyl alcohol (polymer matrix) with the aim of improving the properties of the film for use in food packaging. The mechanical properties, crystallinity, thermal resistance, chemical structure, antioxidant activity, water barrier properties and optical properties (transparency and UV barrier), were evaluated. In general, with the addition of LCNF, an improvement in the studied properties of the films was observed. In terms of mechanical properties, the films reinforced with 7% LCNF TEMPO showed the best results for tensile strength, Young’s modulus and elongation at break. At the same LCNF proportion, the thermal stability (T_max) increased between 5.5% and 10.8%, and the antioxidant activity increased between 90.9% and 191.8%, depending on the raw material and the pre-treatment used to obtain the different LCNF. Finally, a large increase in UV blocking was also observed with the addition of 7% LCNF. In particular, the films with 7% of eggplant LCNF showed higher performance for Young’s modulus, elongation at break, thermal stability and UV barrier. Overall, results demonstrated that the use of LCNF generated from agricultural residues represents a suitable bioeconomy approach able to enhance film properties for its application in the development of more sustainable and eco-friendly food packaging systems.

Statistical Modeling and Performance Optimization of a Two-Chamber Microbial Fuel Cell by Response Surface Methodology

Microbial fuel cell, as a promising technology for simultaneous power production and waste treatment, has received a great deal of attention in recent years; however, generation of a relatively low power density is the main limitation towards its commercial application. This study contributes toward the optimization, in terms of maximization, of the power density of a microbial fuel cell by employing response surface methodology, coupled with central composite design. For this optimization study, the interactive effect of three independent parameters, namely (i) acetate concentration in the influent of anodic chamber; (ii) fuel feed flow rate in anodic chamber; and (iii) oxygen concentration in the influent of cathodic chamber, have been analyzed for a two-chamber microbial fuel cell, and the optimum conditions have been identified. The optimum value of power density was observed at an acetate concentration, a fuel feed flow rate, and an oxygen concentration value of 2.60 mol m−3, 0.0 m3, and 1.00 mol m−3, respectively. The results show the achievement of a power density of 3.425 W m−2, which is significant considering the available literature. Additionally, a statistical model has also been developed that correlates the three independent factors to the power density. For this model, R2, adjusted R2, and predicted R2 were 0.839, 0.807, and 0.703, respectively. The fact that there is only a 3.8% error in the actual and adjusted R2 demonstrates that the proposed model is statistically significant.

Influence of Glutaraldehyde's Molecular Transformations on Spectroscopic Investigations of Its Conjugation with Amine-Modified Fe3O4 Microparticles in the Reaction Medium

Glutaraldehyde (GA) is a widely used cross-linking agent in biological research due to its superior characteristics, such as high reactivity toward proteins, high stability, and cost-effectiveness. In this regard, analyzing spectral changes initiated by various molecular forms and transformations of GA in a reaction medium and its reaction with surface functional-modified solid spheres is vital for a successful bioconjugation process targeting the biomolecules of interest. In this work, we present Fourier transform-infrared (FT-IR), Raman, and UV-visible spectroscopic analyses of glutaraldehyde-modified Fe₃O₄ microparticles (magnetic beads) to confirm the conjugation between GA and magnetic beads. We also studied the molecular transformations of glutaraldehyde during the reaction with amine-modified magnetic beads via investigating the reaction medium of the glutaraldehyde solution. Our FT-IR and Raman studies confirmed that glutaraldehyde was successfully coupled on the magnetic beads. Furthermore, FT-IR and UV-vis studies on the glutaraldehyde solution revealed the multiple molecular forms of GA in an aqueous medium, and they also confirmed that glutaraldehyde transforms into other molecular forms while the reaction occurs with the magnetic beads.

Carboxymethyl Cellulose Entrapped in a Poly(vinyl) Alcohol Network: Plant-Based Scaffolds for Cartilage Tissue Engineering

Cartilage has a limited inherent healing capacity after injury, due to a lack of direct blood supply and low cell density. Tissue engineering in conjunction with biomaterials holds promise for generating cartilage substitutes that withstand stress in joints. A major challenge of tissue substitution is creating a functional framework to support cartilage tissue formation. Polyvinyl alcohol (PVA) was crosslinked with glutaraldehyde (GA), by varying the mole ratios of GA/PVA in the presence of different amounts of plant-derived carboxymethyl cellulose (CMC). Porous scaffolds were created by the freeze-drying technique. The goal of this study was to investigate how CMC incorporation and crosslinking density might affect scaffold pore formation, swelling behaviors, mechanical properties, and potential use for engineered cartilage. The peak at 1599 cm-1 of the C=O group in ATR-FTIR indicates the incorporation of CMC into the scaffold. The glass transition temperature (Tg) and Young's modulus were lower in the PVA/CMC scaffold, as compared to the PVA control scaffold. The addition of CMC modulates the pore architecture and increases the swelling ratio of scaffolds. The toxicity of the scaffolds and cell attachment were tested. The results suggest that PVA/CMC scaffolding material can be tailored in terms of its physical and swelling properties to potentially support cartilage formation.

Novel Semi-Interpenetrated Polymer Networks of Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate)/Poly (Vinyl Alcohol) with Incorporated Conductive Polypyrrole Nanoparticles

This paper reports the preparation and characterization of semi-interpenetrating polymer networks (semi-IPN) of poly(3-hydroxybutirate-co-3-hydroxyvalerate), PHBV, and poly (vinyl alcohol), PVA, with conductive polypirrole (PPy) nanoparticles. Stable hybrid semi-IPN (PHBV/PVA 30/70 ratio) hydrogels were produced by solvent casting, dissolving each polymer in chloroform and 1-methyl-2-pyrrolidone respectively, and subsequent glutaraldehyde crosslinking of the PVA chains. The microstructure and physical properties of this novel polymeric system were analysed, including thermal behaviour and degradation, water sorption, wettability and electrical conductivity. The conductivity of these advanced networks rose significantly at higher PPy nanoparticles content. Fourier transform infrared spectroscopy (FTIR) and calorimetry characterization indicated good miscibility and compatibility between all the constituents, with no phase separation and strong interactions between phases. A single glass transition was observed between those of pure PHBV and PVA, although PVA was dominant in its contribution to the glass transition process. Incorporating PPy nanoparticles significantly reduced the hydrogel swelling, even at low concentrations, indicating molecular interactions between the PPy nanoparticles and the hydrogel matrix. The PHBV/PVA semi-IPN showed higher thermal stability than the neat polymers and PHBV/PVA blend, which also remained in the tertiary systems.

A highly elastic, Room-temperature repairable and recyclable conductive hydrogel for stretchable electronics

Conductive hydrogels present great potential in bioelectronics, ionotronic devices, and electronic skin. However, the creeping and plastic deformation of hydrogel often lead to poor stability and low reliability in applications. Here, we report a highly elastic conductive hydrogel based on crosslinked carbon nanotubes (CNT) and poly(vinyl alcohol) (PVA). With the formation of double crosslinking interactions, i.e., strong interaction from covalent acetal bonds and weak interaction from hydrogen bonds, CNT-PVA networks exhibit good stretchability (fracture stain up to 500%), rapid recovery, zero-residual deformation, and excellent mechanical stability. As such, the electromechanical response of this dual-crosslinked conductive hydrogel is stable and repeatable for a wide range of loading rates. Benefiting from the abundant hydroxyl groups and reversible acetal linking bridges in hydrogel networks, the prepared conductive hydrogel is not only repairable at room temperature, but also recyclable.

A Comprehensive Review of the Covalent Immobilization of Biomolecules onto Electrospun Nanofibers

Biomolecule immobilization has attracted the attention of various fields such as fine chemistry and biomedicine for their use in several applications such as wastewater, immunosensors, biofuels, et cetera. The performance of immobilized biomolecules depends on the substrate and the immobilization method utilized. Electrospun nanofibers act as an excellent substrate for immobilization due to their large surface area to volume ratio and interconnectivity. While biomolecules can be immobilized using adsorption and encapsulation, covalent immobilization offers a way to permanently fix the material to the fiber surface resulting in high efficiency, good specificity, and excellent stability. This review aims to highlight the various covalent immobilization techniques being utilized and their benefits and drawbacks. These methods typically fall into two categories: (1) direct immobilization and (2) use of crosslinkers. Direct immobilization techniques are usually simple and utilize the strong electrophilic functional groups on the nanofiber. While crosslinkers are used as an intermediary between the nanofiber substrate and the biomolecule, with some crosslinkers being present in the final product and others simply facilitating the reactions. We aim to provide an explanation of each immobilization technique, biomolecules commonly paired with said technique and the benefit of immobilization over the free biomolecule.

Nanofibrous Actuator with an Alignment Gradient for Millisecond-Responsive, Multidirectional, Multimodal, and Multidimensional Large Deformation

Although progress has been made in the construction of stimulus-responsive actuators, the performance of these smart materials is still unsatisfactory, owing to their slow response, small deformation amplitude, uncontrollable bending direction, and unidirectional (2D to 3D) transformation. Herein, we employ a structural bionic strategy to design and fabricate a novel water/moisture responsive nanofibrous actuator with an alignment degree gradient. Owing to its different contraction gradient amplitudes along the thickness direction and the unique physical property of the nanofibrous material, the prepared actuator exhibits excellent shape deformation performance, including superfast response (less than 150 ms), controllable deformation directions, multiple actuation models, multiple dimensional deformation (0D-3D, 1D-3D, 2D-3D, and 3D-3D), large bending curvature (25.3 cm^-1), and a repeatability rate of at least 1000. The actuation performance of the nanofibrous actuator is superior to the currently reported actuators. The nanofibers are integrated into layer-by-layer and side-by-side structures to achieve competitive and independent actuation, respectively. The outstanding shape-changing properties of the nanofibrous actuator result in the construction of practical intelligent devices for applications such as amphibious movement, intelligent protection, and cargo transportation. The nanofibrous actuator designed herein exhibits tremendous potential in soft robotics, sensors, and biomedicine.

Poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol) Copolymer 2D Single Network at the Air-Water Interface

In this work, Langmuir monolayers based on poly(ethylene glycol)-poly(propylene glycol)-poly(ethylene glycol) (PEG-PPG-PEG) triblock copolymer were in situ stabilized at the air-water interface in the presence of a cross-linking agent, benzene-1,3,5-tricarboxaldehyde (BTC), in the aqueous subphase. The reaction takes place through acid-catalyzed acetalization between the terminal hydroxyl groups of the copolymer and aldehyde functions of the BTC molecules. Mean area per repeat unit measurements as a function of the reaction time show a significant monolayer contraction associated with an increase in its compressibility modulus. In addition, Brewster angle microscopy observations indicate the appearance of higher-density two-dimensional domains, irreversibly formed at constant surface pressure. This is also confirmed on a smaller scale by atomic force microscopy (AFM). These arguments, consistent with copolymer monolayer cross-linking in acidic medium, are supported in situ at the air-water interface by sum-frequency generation (SFG) spectroscopy. Furthermore, PEG-PPG-PEG monolayer cross-linking is not evidenced in alkaline medium, in coherence with the interfacial acid-catalyzed acetalization.