One-pot synthesis of zinc oxide nanoparticles via chemical precipitation for bromophenol blue adsorption and the antifungal activity against filamentous fungi

In this research, zinc oxide nanoparticles (ZnONPs) were prepared via a facile one-pot chemical precipitation approach and applied in the adsorption of bromophenol blue (BRB) and as antifungal agents against the filamentous fungi and plant pathogens; Alternaria alternata CGJM3078, Alternaria alternata CGJM3006 and Fusarium verticilliodes CGJM3823. The ZnONPs were characterized by the UV-Vis, FTIR, XRD, TGA, BET, SEM, TEM, and EDX techniques, which showed efficient synthesis. The characteristics ZnO UV-Vis absorption band was observed at 375 nm, while the XRD showed an average ZnONPs crystalline size of 47.2 nm. The SEM and TEM images showed an irregular shaped and aggregated porous structure of 65.3 nm average-sized ZnONPs. The TGA showed 22.9% weight loss at 800 °C indicating the high thermal stability of ZnONPs, while BET analysis revealed a surface area, pore volume and pore diameter of 9.259 m2/g, 0.03745 cm3/g and 9.87 nm respectively. The Freundlich, pseudo-second-order, and intra-particle diffusion models showed R2 > 0.9494 and SSE < 0.7412, thus, exhibited the best fit to the isotherm and kinetics models. Thermodynamics revealed feasible, endothermic, random, and spontaneous adsorption of BRB onto the synthesized ZnONPs. The antifungal assay conducted depicts strong antifungal activities against all three tested fungi. Noticeably, ZnONPs (0.002-5 mg/mL) showed maximum activities with the largest zone of inhibition against A. alternata CGJM 3006 from 25.09 to 36.28 mm. This was followed by the strain F. verticilliodes CGJM 3823 (range from 23.77 to 34.77 mm) > A. alternata CGJM3078 (range from 22.73 to 30.63 mm) in comparison to Bleach 5% (positive control). Additionally a model was proposed based on the possible underlying mechanisms for the antifungal effect. This research demonstrated the potent use of ZnONPs for the adsorption of BRB and as effective antifungal agents.

Development of a novel three-dimensional magnetic polymer aerogel as an efficient adsorbent for malachite green removal

A novel three-dimensional (3D) magnetic bacterial cellulose nanofiber/graphene oxide polymer aerogel (MBCNF/GOPA) composed of bacterial cellulose nanofibers (BCNFs), Fe₃O₄ nanoparticles, graphene oxide (GO) nano-sheets, and polyvinyl alcohol (PVA) was developed by combining a facile filler-loaded networks method with a vacuum freeze-drying process for the removal of malachite green (MG) dye from aqueous solution. The influence of various factors on adsorption, including initial dye concentration, adsorbent dosage, contact time, temperature, and pH of dye solution, was then investigated. The adsorbent preserved a high adsorption capacity over a wide range of pH conditions. Moreover, the adsorption isotherms data fitted well with the Langmuir isotherm model with a maximum adsorption capacity of 270.27 mg g^-1. Adsorption kinetics followed the pseudo-second-order model, and the thermodynamic parameters showed that the adsorption of MG dye was feasible and endothermic in nature and occurred spontaneously. Therefore, owing to its demonstrated properties such as 3D interconnected porous structure, lightweight, large specific surface area, superparamagnetic behavior at room temperature, excellent adsorbent efficiency (93% removal) and also its simple and eco-friendly synthesis process, MBCNF/GOPA could be considered a promising candidate for removing cationic dye pollutants from aqueous solution, which can easily be collected from aqueous solution by a small magnet. MBCNF/GOPA also showed favorable reusability for MG removal in wastewater treatment, and its application in different water samples for the removal of MG dye molecules from "real" samples was successfully performed.

Thermosensitive Microgels-Decorated Magnetic Graphene Oxides for Specific Recognition and Adsorption of Pb(II) from Aqueous Solution

Herein, we report a novel type of smart graphene oxide nanocomposites (MGO@PNB) with excellent magnetism and high thermosensitive ion-recognition selectivity of lead ions (Pb2+). The MGO@PNB are fabricated by immobilizing superparamagnetic Fe3O4 nanoparticles (NPs) and poly(N-isopropylacrylamide-co-benzo-18-crown-6 acrylamide) thermosensitive microgels (PNB) onto graphene oxide (GO) nanosheets using a simple one-step solvothermal method and mussel-inspired polydopamine chemistry. The PNB are composed of cross-linked poly(N-isopropylacrylamide) (PNIPAM) chains with numerous appended 18-crown-6 units. The 18-crown-6 units serve as hosts that can selectively recognize and capture Pb2+ from aqueous solution, and the PNIPAM chains act as a microenvironmental actuator for the inclusion constants of 18-crown-6/Pb2+ host-guest complexes. The loaded Fe3O4 NPs endow the MGO@PNB with convenient magnetic separability. The fabricated MGO@PNB demonstrate remarkably high ion-recognition selectivity of Pb2+ among the coexisting metal ions because of the formation of stable 18-crown-6/Pb2+ inclusion complexes. Most interestingly, the MGO@PNB show excellent thermosensitive adsorption ability toward Pb2+ due to the incorporation of PNIPAM functional chains on the GO. Further thermodynamic studies indicate that the adsorption of Pb2+ onto the MGO@PNB is a spontaneous and endothermic process. The adsorption kinetics and isotherm data can be well described by the pseudo-second-order kinetic model and the Langmuir isotherm model, respectively. Most importantly, the Pb2+-loaded MGO@PNB can be more easily regenerated by alternatively washing with hot/cold water than the commonly used regeneration methods. Such multifunctional graphene oxide nanocomposites could be used for specific recognition and removal of Pb2+ from water environment.

Guar Gum-Grafted Terpolymer Hydrogels for Ligand-Selective Individual and Synergistic Adsorption: Effect of Comonomer Composition

Grafting of guar gum (GG) and in situ strategic attachment of acrylamidosodiumpropanoate (ASP) via solution polymerization of acrylamide (AM) and sodium acrylate (SA) resulted in the synthesis of a sustainable GG-g-(AM-co-SA-co-ASP)/GGAMSAASP interpenetrating polymer network (IPN)-based smart superadsorbent with excellent physicochemical properties and reusability, through systematic optimization by response surface methodology (RSM) for removal of methyl violet (MV) and/or Hg(II). The relative effects of SA/AM ratios, in situ allocation of ASP, grafting of GG into the AMSAASP terpolymer, ligand-selective superadsorption mechanism, and relative microstructural changes in individually/synergistically-adsorbed MV-/Hg(II)-/Hg(II)-MV-GGAMSAASPs were determined by extensive analyses using Fourier transform infrared (FTIR), proton nuclear magnetic resonance, ultraviolet-visible (UV-vis), and O 1s-/N 1s-/C 1s-/Hg 4f7/2,5/2-X-ray photoelectron spectroscopies, thermogravimetric analysis, differential scanning calorimetry, X-ray diffraction, field emission scanning electron microscopy, and energy-dispersive spectroscopy and were supported by % gel content, pHPZC, and % graft ratio. The ionic/covalent-bonding, monodentate, bidentate bridging, and bidentate chelating coordination between GGAMSAASPs and Hg(II), and MV+-Hg(II) bonding were rationalized by FTIR, UV-vis, fitment of kinetics data to the pseudo-second-order model, and thermodynamic parameters. The maximum adsorption capacities of 49.12 and 53.28 mg g-1 were determined for Hg(II) and MV, respectively, under optimized conditions.

Enhanced adsorption removal of anionic dyes via a facile preparation of amino-functionalized magnetic silica

A novel amino-functionalized magnetic silica (Fe₃O₄@SiO₂-NH₂) was easily prepared via a one-step method integrating the immobilization of 3-aminopropyltriethoxysilane with a sol-gel process of tetraethyl orthosilicate into a single process. This showed significant improvement in the adsorption capacity of anionic dyes. The product (Fe₃O₄@SiO₂-NH₂) was characterized with scanning electron microscopy, Fourier transform infrared spectroscopy, energy dispersive X-ray spectrometry, zeta potential and vibrating sample magnetometry. The adsorption performance of Fe₃O₄@SiO₂-NH₂ was then tested by removing acid orange 10 (AO10) and reactive black 5 (RB5) from the aqueous solutions under various experimental conditions including initial solution pH, initial dye concentrations, reaction time and temperature. The results indicated that the maximum adsorption capacity of AO10 and RB5 on Fe₃O₄@SiO₂-NH₂ was 621.9 and 919.1 mg g^-1 at pH 2, respectively. The sorption isotherms fit the Langmuir model nicely. Similarly, the sorption kinetic data were better fitted into the pseudo-second order kinetic model than the pseudo-first order model. In addition, the thermodynamic data demonstrated that the adsorption process was endothermic, spontaneous and physical. Furthermore, Fe₃O₄@SiO₂-NH₂ could be easily separated from aqueous solutions by an external magnetic field, and the preparation was reproducible.

Loess surface grafted functional copolymer for removing basic fuchsin

Loess clay (LC), a very abundant clay with granules and high hydrophilicity, was modified by surface grafting copolymerization of acrylate and styrene monomers with functional side groups, which afforded a LC surface grafting copolymer.

Synthesis of guar gum-g-(acrylic acid-co-acrylamide-co-3-acrylamido propanoic acid) IPN via in situ attachment of acrylamido propanoic acid for analyzing superadsorption mechanism of Pb(ii)/Cd(ii)/Cu(ii)/MB/MV

GG-g-(AA-co-AM-co-APA) IPN superadsorbent, characterization of loaded microstructures and individual/synergistic adsorption mechanism of MB/SF/Pb(ii)/Cd(ii)/Cu(ii) are reported.

Facile synthesis of methyl propylaminopropanoate functionalized magnetic nanoparticles for removal of acid red 114 from aqueous solution

The removal of AR-114 from aqueous solution by novel nano-adsorbent Fe₃O₄@SiO₂–MPAP through hydrogen bonding interactions.

The electrochemical sensor based on electrochemical oxidation of nitrite on metalloporphyrin–graphene modified glassy carbon electrode

In this study, 5-(4-aminophenyl)-10,15,20-triphenylporphyrin]Mn(iii) (MnNH₂TPP) and graphene oxide (GO) composite materials (GO–MnNH₂TPP) were successfully used to modify a glassy carbon electrode (GC) by the drop casting method.

Removal of mercury(ii) and methylene blue from a wastewater environment with magnetic graphene oxide: adsorption kinetics, isotherms and mechanism

The magnetic graphene oxide (MGO) has maximum adsorption capacities of 71.3 and 306.5 mg g⁻¹ for Hg(ii) and methylene blue, respectively. And MGO has a magnetization of 31.5 emu g⁻¹, easily separated from solutions via exterior magnets.

Removal of anionic azo dye from water with activated graphene oxide: kinetic, equilibrium and thermodynamic modeling

In order to improve the BET value and adsorption capacity of graphene oxide (GO), activated GO (GO_KOH) was successfully prepared by high temperature solid state activation with KOH, and was used to remove the anionic dye orange IV from water.