Recent progress in MoS2 nanostructures for biomedical applications: Experimental and computational approach

In the category of 2D materials, MoS2 a transition metal dichalcogenide, is a novel and intriguing class of materials with interesting physicochemical properties, explored in applications ranging from cutting-edge optoelectronic to the frontiers of biomedical and biotechnology. MoS2 nanostructures an alternative to heavy toxic metals exhibit biocompatibility, low toxicity and high stability, and high binding affinity to biomolecules. MoS2 nanostructures provide a lot of opportunities for the advancement of novel biosensing, nanodrug delivery system, electrochemical detection, bioimaging, and photothermal therapy. Much efforts have been made in recent years to improve their physiochemical properties by developing a better synthesis approach, surface functionalization, and biocompatibility for their safe use in the advancement of biomedical applications. The understanding of parameters involved during the development of nanostructures for their safe utilization in biomedical applications has been discussed. Computational studies are included in this article to understand better the properties of MoS2 and the mechanism involved in their interaction with biomolecules. As a result, we anticipate that this combined experimental and computational studies of MoS2 will inspire the development of nanostructures with smart drug delivery systems, and add value to the understanding of two-dimensional smart nano-carriers.

Effect of 4-mercaptophenylboronic acid functionalized MoS2 quantum dots on amyloid aggregation of bovine serum albumin

In recent years, seeking and screening of compounds that can inhibit and/or depolymerize protein aggregation has been a hot issue in the field of pharmaceutical research. As a new material, quantum dots have been widely concerned by medical researchers. In present study, a novel 4-mercaptophenylboronic acid functionalized MoS2 quantum dots (4-MPBA-MoS2 QDs) was successfully synthesized through a one-pot hydrothermal approach by using molybdate dehydrate and 4-mercaptophenylboronic acid as Mo and S source, respectively. Transmission electron microscopy observation showed that the morphology and microstructure of the 4-MPBA-MoS2 QDs displayed uniform spherical shape with a diameter of approximately 1.5 ∼ 3.0 nm. The UV and fluorescence spectra experiments indicated that the prepared QDs had good water solubility and two weak absorption peaks were appeared at 280 nm and 310 nm. When the excitation wavelength was set to 310 nm, the 4-MPBA-MoS2 QDs had the strongest fluorescence intensity, and the maximum emission wavelength appeared at 405 nm. In vitro experiments showed that the 4-MPBA-MoS2 QDs could significantly reduce the aggregation of bovine serum albumin (BSA). Especially when the mass ratio of BSA to 4-MPBA-MoS2 QDs was 1:5, the inhibition rate could reach 76.4%. Cell experiment showed that the presence of 4-MPBA-MoS2 QDs could obviously decrease the cytotoxicity induced by BSA amyloid fibrils. Moreover, the depolymerization of BSA amyloid fibrils by 4-MPBA-MoS2 QDs and its excellent cell permeability were also observed. Molecular docking studies have shown that 4-MPBA-MoS2 QDs may stabilize the BSA structure through van der Waals forces, hydrophobic force, electrostatic interactions and hydrogen bonds formed between the outer layer of 4-MPBA and BSA to prevent fibrosis aggregation. The results of this study suggested that 4-MPBA-MoS2 QDs showed low cytotoxicity, good biocompatibility and solubility, and had a great potential in the design of new drugs for the treatment of amyloid-related diseases.

ZIF@VO2 as an Intelligent Nano-Reactor for On-Demand Angiogenesis and Disinfection

Absent angiogenesis and bacterial infection are two major challenges that simultaneously delay the repair of injured tissues and organs. However, most current therapeutic systems deliver therapeutic cues in a separate and inaccurate manner which stimulates angiogenesis or inhibits infection leading to limited repair and side effects. Advanced therapeutic systems capable of providing accurate angiogenic stimulation and anti-infection signals in response to the changing microenvironment are urgently needed. Herein, a nano-reactor (ZFVO) involving zeolitic imidazolate framework-67 (ZIF-67)-deposited hollow vanadium oxide (VO₂ ) is developed to intelligently execute pro-angiogenesis and/or disinfection via the responsive release of cobalt ions and hydroxyl radicals to the injury and infection sites, respectively. ZFVO nano-reactor demonstrates a novel strategy for constructing drug-free nano-platforms with a hierarchical structure which has potential for the accurate treatment of trauma and orthopedic diseases.

BSA-assisted hydrothermal conversion of MoS2 nanosheets into quantum dots with high yield and bright fluorescence for constructing a sensing platform via dual quenching effects

With large surface-responsive and excitation-dependent fluorescence, two-dimensional fluorescent quantum dots (QDs) have been receiving tremendous attention to develop their facile synthetic approaches and/or expand their promising applications. Here, a two-step strategy is demonstrated for high-yield production of MoS₂ QDs from MoS₂ powder through first sonication-driven exfoliation and subsequent hydrothermal splitting with the assistance of bovine serum albumin (BSA). Experimentally, ∼100 nm-sized MoS₂ nanosheets are ultrasonically exfoliated from MoS₂ powder in a BSA solution, and further hydrothermally split into ∼ 8.2 nm-sized QDs (NQDs) at 200 °C. In addition to their excellent stability/dispersibility in aqueous solution, the resultant MoS₂ NQDs also exhibit much brighter blue fluorescence than those synthesized by other methods. The strong fluorescence is significantly quenched by p-nitrophenol for constructing a sensitive sensor with high selectivity, which is attributed to dual quenching effects from inner filter effect (IFE) and fluorescence resonance energy transfer (FRET). Interestingly, with the increment of pH from 5 to 10, the ratio of IFE in fluorescence quenching gradually decreases accompanied by an increment of FRET ratio, resulting in the high sensitivity and responsivity for detecting p-nitrophenol at a wide range of pH. Clearly, the MoS₂ NQD-based sensing approach demonstrates a promising potential for selective detection and fast analysis of pollutants in environment monitoring and security screening.

Exfoliation of MoS2 Quantum Dots: Recent Progress and Challenges

Although, quantum dots (QDs) of two-dimensional (2D) molybdenum disulfide (MoS2) have shown great potential for various applications, such as sensing, catalysis, energy storage, and electronics. However, the lack of a simple, scalable, and inexpensive fabrication method for QDs is still a challenge. To overcome this challenge, a lot of attention has been given to the fabrication of QDs, and several fabrication strategies have been established. These exfoliation processes are mainly divided into two categories, the 'top-down' and 'bottom-up' methods. In this review, we have discussed different top-down exfoliation methods used for the fabrication of MoS2 QDs and the advantages and limitations of these methods. A detailed description of the various properties of QDs is also presented.

Dual Role of MoS2 Quantum Dots in a Cross-Dehydrogenative Coupling Reaction

Modern day research focuses on the development of greener and eco-friendlier protocols to fabricate biologically relevant targets with minimal waste generation. C-C bond formation reactions are of prime importance in this regard. In a typical photocatalytic hydrogen evolution reaction, three components are used, viz, catalyst, photosensitizer, and sacrificial amine donor. Among these, the photosensitizer and sacrificial amine donors are wasted at the end of the reaction. Considering these drawbacks, in this work, we have developed a methodology targeted at the utilization of sacrificial amine donors for C-H functionalization with MoS2 quantum dots (QDs) as the catalyst as well as the photosensitizer. QDs indeed emerged to be an active participant in the heterogeneous electron transfer process. This concept opens up new possibilities in the field of nanomaterial-based photomediated organic transformations without the aid of any external photosensitizers via a clean and sustainable protocol with no side product.

Modulation of bovine serum albumin aggregation by glutathione functionalized MoS2 quantum dots

In present study, a novel glutathione functionalized MoS₂ quantum dots (GSH-MoS₂ QDs) was synthesized from sodium molybdate dehydrate and glutathione by using a one-pot hydrothermal method. After they were characterized, the influence of GSH-MoS₂ QDs on amyloid aggregation of bovine serum albumin (BSA) was investigated by various analytical methods including thioflavin T fluorescence assay, circular dichroism and transmission electron microscope. Moreover, the effect of GSH-MoS₂ QDs on cytotoxicity induced by BSA amyloid fibrils and cell penetration were evaluated by MTT assay and confocal fluorescence imaging, respectively. The results indicated that the GSH-MoS₂ QDs not only had good water solubility, excellent biocompatibility and low cytotoxicity, but also could obviously inhibit the aggregation of BSA and depolymerize the formed BSA aggregates. The data obtained from this work demonstrated that the GSH-MoS₂ QDs is expected to become a candidate drug for the treatment of amyloid-related diseases.

Sulfonic acid/sulfur trioxide (SO3H/SO3) functionalized two-dimensional MoS2 nanosheets for high-performance photocatalysis of organic pollutants

We report the enhanced photocatalytic activity of sulfonic acid/sulfur trioxide (SO3H/SO3) functionalized two-dimensional (2D)-MoS2 (SO3H/SO3-MoS2) nanosheets synthesized using a one-pot hydrothermal method.

Tuning Microbial Activity via Programmatic Alteration of Cell/Substrate Interfaces

A wide portfolio of advanced programmable materials and structures has been developed for biological applications in the last two decades. Particularly, due to their unique properties, semiconducting materials have been utilized in areas of biocomputing, implantable electronics, and healthcare. As a new concept of such programmable material design, biointerfaces based on inorganic semiconducting materials as substrates introduce unconventional paths for bioinformatics and biosensing. In particular, understanding how the properties of a substrate can alter microbial biofilm behavior enables researchers to better characterize and thus create programmable biointerfaces with necessary characteristics on demand. Herein, the current status of advanced microorganism-inorganic biointerfaces is summarized along with types of responses that can be observed in such hybrid systems. This work identifies promising inorganic material types along with target microorganisms that will be critical for future research on programmable biointerfacial structures.

Cysteine-Induced Hybridization of 2D Molybdenum Disulfide Films for Efficient and Stable Hydrogen Evolution Reaction

The noble, metal-free materials capable of efficiently catalyzing water splitting reactions currently hold a great deal of promise. In this study, we reported the structure and electrochemical performance of new MoS₂-based material synthesized with L-cysteine. For this, a facile one-pot hydrothermal process was developed and an array of densely packed nanoplatelet-shaped hybrid species directly on a conductive substrate were obtained. The crucial role of L-cysteine was determined by numerous methods on the structure and composition of the synthesized material and its activity and stability for hydrogen evolution reaction (HER) from the acidic water. A low Tafel slope of 32.6 mV dec⁻¹, close to a Pt cathode, was registered for the first time. The unique HER performance at the surface of this hybrid material in comparison with recently reported MoS₂-based electrocatalysts was attributed to the formation of more defective 1T, 2H-MoS₂/MoO_x, C nanostructures with the dominant 1T-MoS₂ phase and thermally degraded cysteine residues entrapped. Numerous stacks of metallic (1T-MoS₂ and MoO₂) and semiconducting (2H-MoS₂ and MoO₃) fragments relayed the formation of highly active layered nanosheets possessing a low hydrogen adsorption free energy and much greater durability, whereas intercalated cysteine fragments had a low Tafel slope of the HER reaction. X-ray photoelectron spectroscopy, scanning electron microscopy, thermography with mass spectrometry, high-resolution transmission electron microscopy, Raman spectroscopy techniques, and linear sweep voltammetry were applied to verify our findings.

Synthesis of MoWS2 on Flexible Carbon-Based Electrodes for High-Performance Hydrogen Evolution Reaction

We directly synthesize MoWS₂ nanosheets on conductive carbon nanotube yarn (MoWS₂/CNTY) and carbon fiber cloth (MoWS₂/CC) through a fast and low-temperature thermolysis method to obtain flexible catalyst electrodes that show high performance in the hydrogen evolution reaction. Small Tafel slopes of 41.8 and 46.7 mV dec^-1 are achieved for MoWS₂/CC and MoWS₂/CNTY, respectively, by optimizing the density of the exposed active edge sites of vertically aligned MoWS₂ on CNTY and CC. Furthermore, the catalyst electrodes demonstrate good electrocatalytic stability over 36 h. The proposed technique for fabricating high-performance, binder-free, and flexible catalyst electrodes is more accessible and faster than conventional methods.

Quantum dots from microfluidics for nanomedical application

Nanomedicine, with its advantages of rapid diagnosis, high sensitivity and high accuracy, has aroused extensive interest of researchers, as the cornerstone of nanomedicine, nanomaterials achieve extra attention and rapid development. Among nanomaterials, quantum dots stand out due to their long fluorescence lifetime and excellent antiphotobleaching performance. At present, quantum dots have been applied to the diagnosis and treatment of diseases and various strategies have been presented to fabricate quantum dots. Microfluidic is one promising strategy since microfluidic device can provide an effective platform for the diagnosis of trace disease markers. In this paper, research progress in the microfluidic synthesis of quantum dots and quantum dot-based nanomedical application is discussed. The classification of quantum dots is firstly introduced, and the researches on quantum dots synthesis based on microfluidic is then mainly described, including the sort, design, preparation of microfluidic synthesis device and its application in synthesis. Nanomedical applications of the quantum dots is especially described and emphasized. The prospects for future development of quantum dots from microfluidic for nanomedical application are finally presented. This article is categorized under: Diagnostic Tools > in vitro Nanoparticle-Based Sensing.

Electrically Pumped White-Light-Emitting Diodes Based on Histidine-Doped MoS2 Quantum Dots

MoS₂ quantum dots (QDs)-based white-light-emitting diodes (QD-WLEDs) are designed, fabricated, and demonstrated. The highly luminescent, histidine-doped MoS₂ QDs synthesized by microwave induced fragmentation of 2D MoS₂ nanoflakes possess a wide distribution of available electronic states as inferred from the pronounced excitation-wavelength-dependent emission properties. Notably, the histidine-doped MoS₂ QDs show a very strong emission intensity, which exceeds seven times of magnitude larger than that of pristine MoS₂ QDs. The strongly enhanced emission is mainly attributed to nitrogen acceptor bound excitons and passivation of defects by histidine-doping, which can enhance the radiative recombination drastically. The enabled electroluminescence (EL) spectra of the QD-WLEDs with the main peak around 500 nm are found to be consistent with the photoluminescence spectra of the histidine-doped MoS₂ QDs. The enhanced intensity of EL spectra with the current increase shows the stability of histidine-doped MoS₂ based QD-WLEDs. The typical EL spectrum of the novel QD-WLEDs has a Commission Internationale de l'Eclairage chromaticity coordinate of (0.30, 0.36) exhibiting an intrinsic broadband white-light emission. The unprecedented and low-toxicity QD-WLEDs based on a single light-emitting material can serve as an excellent alternative for using transition metal dichalcogenides QDs as next generation optoelectronic devices.

Immobilized Single Molecular Molybdenum Disulfide on Carbonized Polyacrylonitrile for Hydrogen Evolution Reaction

Designing a MoS₂ catalyst having a large number of active sites and high site activity enables the catalytic activity toward the hydrogen evolution reaction to be improved. Herein, we report the synthesis of a low-cost and catalytically active immobilized single molecular molybdenum disulfide on carbonized polyacrylonitrile (MoS₂-cPAN) electrocatalyst. From the extended X-ray absorption fine structure spectra analysis, we found that the as-prepared material has no metal-metal scattering and it resembles MoS₂ with a molecular state. Meanwhile, the size of the molecular MoS₂ has been estimated to be about 1.31 nm by high-angle annular dark-field scanning transmission electron microscopy. A low coordination number and maximum utilization of the single molecular MoS₂ surface enable MoS₂-cPAN to demonstrate electrochemical performance significantly better than that of bulk MoS₂ by two orders of exchange current density ( j_o) and turnover frequency to the hydrogen evolution.

MoS2 Quantum Dots-Modified Covalent Triazine-Based Frameworks for Enhanced Photocatalytic Hydrogen Evolution

MoS₂ quantum dots (QDs)-modified covalent triazine-based framework (MoS₂ /CTF) composites are synthesized through an in situ photodeposition method. MoS₂ QDs are well distributed and stabilized on the layers of CTFs by coordination of the frameworks to MoS₂ . The QDs-sheet interactions between MoS₂ and CTFs facilitate interfacial charge transfer and separation. As a consequence, the composites exhibit outstanding photocatalytic activity and stability for hydrogen evolution under visible light irradiation (λ≥420 nm), that exceed those over pristine CTFs and MoS₂ -modified g-C₃ N₄ (MoS₂ /g-C₃ N₄ ) composite, making them promising materials for solar energy conversion.

Recent progress in two-dimensional inorganic quantum dots

This review critically summarizes recent progress in the categories, synthetic routes, properties, functionalization and applications of 2D materials-based quantum dots (QDs).

Recent Progress in the Preparation, Assembly, Transformation, and Applications of Layer-Structured Nanodisks beyond Graphene

Layered nanodisks with confined thickness and lateral size have been emerging as a unique type of two-dimensional (2D) nanomaterials in recent years. Inheriting some properties of 2D nanosheets and meanwhile possessing the size-confinement effect, these layered nanodisks exhibit unique optical, electronic, and chemical properties, which endow them with great promise in a wide range of applications. Here, the recent progress of layered nanodisks is introduced. The synthetic strategies, assembly, structural/compositional transformation, and applications of layered nanodisks are systematically described and discussed, with emphasis on their new appealing structures and functions. Finally, some perspectives and future research directions of this promising field are given.

Emerging 0D Transition-Metal Dichalcogenides for Sensors, Biomedicine, and Clean Energy

Following research on two-dimensional (2D) transition metal dichalcogenides (TMDs), zero-dimensional (0D) TMDs nanostructures have also garnered some attention due to their unique properties; exploitable for new applications. The 0D TMDs nanostructures stand distinct from their larger 2D TMDs cousins in terms of their general structure and properties. 0D TMDs possess higher bandgaps, ultra-small sizes, high surface-to-volume ratios with more active edge sites per unit mass. So far, reported 0D TMDs can be mainly classified as quantum dots, nanodots, nanoparticles, and small nanoflakes. All exhibited diverse applications in various fields due to their unique and excellent properties. Of significance, through exploiting inherent characteristics of 0D TMDs materials, enhanced catalytic, biomedical, and photoluminescence applications can be realized through this exciting sub-class of TMDs. Herein, we comprehensively review the properties and synthesis methods of 0D TMDs nanostructures and focus on their potential applications in sensor, biomedicine, and energy fields. This article aims to educate potential adopters of these excitingly new nanomaterials as well as to inspire and promote the development of more impactful applications. Especially in this rapidly evolving field, this review may be a good resource of critical insights and in-depth comparisons between the 0D and 2D TMDs.

Synthesis of Au NP@MoS₂ Quantum Dots Core@Shell Nanocomposites for SERS Bio-Analysis and Label-Free Bio-Imaging

In this work, we report a facile method using MoS₂ quantum dots (QDs) as reducers to directly react with HAuCl₄ for the synthesis of Au nanoparticle@MoS₂ quantum dots (Au NP@MoS₂ QDs) core@shell nanocomposites with an ultrathin shell of ca. 1 nm. The prepared Au NP@MoS₂ QDs reveal high surface enhanced Raman scattering (SERS) performance regarding sensitivity as well as the satisfactory SERS reproducibility and stability. The limit of detection of the hybrids for crystal violet can reach 0.5 nM with a reasonable linear response range from 0.5 μM to 0.5 nM (R² ≈ 0.974). Furthermore, the near-infrared SERS detection based on Au NP@MoS₂ QDs in living cells is achieved with distinct Raman signals which are clearly assigned to the various cellular components. Meanwhile, the distinguishable SERS images are acquired from the 4T1 cells with the incubation of Au NP@MoS₂ QDs. Consequently, the straightforward strategy of using Au NP@MoS₂ QDs exhibits great potential as a superior SERS substrate for chemical and biological detection as well as bio-imaging.

MoS2 quantum dot-modified Ag/polyaniline composites with enhanced photogenerated carrier separation for highly efficient visible light photocatalytic H2 evolution performance

Uniform heterostructured MoS₂ QDs–Ag/PANI composites are fabricated, which exhibit significantly enhanced photocatalytic activity for H₂ production under visible light irradiation.

Confinement effect of monolayer MoS2 quantum dots on conjugated polyimide and promotion of solar-driven photocatalytic hydrogen generation

Monolayer MoS₂ quantum dot (MQD) confined polyimide demonstrates 360% enhancement in hydrogen production compared to Pt/PI under solar light.

Constructing Two-, Zero-, and One-Dimensional Integrated Nanostructures: an Effective Strategy for High Microwave Absorption Performance

A novel "201" nanostructure composite consisting of two-dimensional MoS₂ nanosheets, zero-dimensional Ni nanoparticles and one-dimensional carbon nanotubes (CNTs) was prepared successfully by a two-step method: Ni nanopaticles were deposited onto the surface of few-layer MoS₂ nanosheets by a wet chemical method, followed by chemical vapor deposition growth of CNTs through the catalysis of Ni nanoparticles. The as-prepared 201-MoS₂-Ni-CNTs composites exhibit remarkably enhanced microwave absorption performance compared to Ni-MoS₂ or Ni-CNTs. The minimum reflection loss (RL) value of 201-MoS₂-Ni-CNTs/wax composites with filler loading ratio of 30 wt % reached -50.08 dB at the thickness of 2.4 mm. The maximum effective microwave absorption bandwidth (RL< -10 dB) of 6.04 GHz was obtained at the thickness of 2.1 mm. The excellent absorption ability originates from appropriate impedance matching ratio, strong dielectric loss and large surface area, which are attributed to the "201" nanostructure. In addition, this method could be extended to other low-dimensional materials, proving to be an efficient and promising strategy for high microwave absorption performance.

Fabrication of zero to three dimensional nanostructured molybdenum sulfides and their electrochemical and photocatalytic applications

Transition metal dichalcogenides (TMDs) are emerging as promising materials, particularly for electrochemical and photochemical catalytic applications, and among them molybdenum sulfides have received tremendous attention due to their novel electronic and optoelectronic characteristics. Several review articles have summarized the recent progress on TMDs but no critical and systematic summary exists about the nanoscale fabrication of MoS₂ with different dimensional morphologies. In this review article, first we will summarize the recent progress on the morphological tuning and structural evolution of MoS₂ from zero-dimension (0D) to 3D. Then the different engineering methods and the effect of synthesis conditions on structure and morphology of MoS₂ will be discussed. Moreover, the corresponding change in the electronic and physicochemical properties of MoS₂ induced by structure tuning will also be presented. Further, the applications of MoS₂ in various electrochemical systems e.g. hydrogen evolution reaction (HER), oxygen reduction reaction (ORR), oxygen evolution reaction (OER) and supercapacitors as well as photocatalytic hydrogen evolution will be highlighted. The review article will also critically focus on challenges faced by researchers to tune the MoS₂ nanostructures and the resulting electrochemical mechanism to enhance their performances. At the end, concluding remarks and future prospects for the development of better MoS₂ based nanostructured materials for the aforementioned applications will be presented.

A “1-methylimidazole-fixation” route to anchor small-sized nitrides on carbon supports as non-Pt catalysts for the hydrogen evolution reaction

Small-sized WN, Mo₂N have been grown on various carbon supports based on a robust “1-methylimidazole-fixation” strategy.

Quantum dots derived from two-dimensional materials and their applications for catalysis and energy

Equipped with a wide range of extraordinary and tailorable properties, quantum dots derived from two-dimensional materials promise a spectrum of novel applications including catalysis and energy.

Efficient photocatalytic hydrogen production over eosin Y-sensitized MoS2

An uncapped and agglomerated MoS₂ catalyst was solvothermally synthesized and exhibited excellent hydrogen production activity under sensitization of eosin Y.

Molybdenum disulfide quantum dots: synthesis and applications

This review presents the current development of MoS₂QDs with a special focus on their synthesis techniques, properties and their potential in various applications.

Fabrication and surface stochastic analysis of enhanced photoelectrochemical activity of a tuneable MoS2–CdS thin film heterojunction

CdS/MoS₂(t)/ITO thin films were prepared via a facile method with controllable surface properties, and a model was proposed to describe the enhancement of photoelectrochemical activity from a stochastic view point.