Interaction Mechanism of Doxorubicin and SWCNT: Protonation and Diameter Effects on the Drug Loading and Releasing

Chitosan-grafted folic acid decorated one-dimensional GONS: A biocompatible drug cargo for targeted co-delivery of anticancer agents

In conventional chemotherapy, the cancer cells can become highly resilient due to a phenomenon known as multi-drug resistance (MDR). The co-delivery of chemotherapeutic agents assisted with novel nanocarrier-based targeted DDS may counter the MDR issues and subsequently improve their therapeutic efficacy. In line with this, the present work deals with the development of 1D graphene oxide nanoscrolls (GONS)-based nano delivery system for co-delivery of chemosensitizer along with the chemotherapeutic agent. Herein, the 1D GONS nanocarrier was initially functionalized with chitosan (CS) biopolymer and folic acid (FA) further to enhance their biocompatibility and target-specific co-delivery. The resultant GONS-CS-FA (GCF) nanocarriers were co-loaded with doxorubicin (DOX) and caffeic acid (CA) at different weight proportions with respect to nanocarrier and drug composition. The optimum loading efficiency of 51.14 ± 1.47 % (DOX) and 49.70 ± 1.19 % (CA) was observed for GCF: drug ratio of 2.5 with drug composition of 1:1. In vitro release at pH 5 yielded ~83 % DOX and 75 % CA, compared to ~71 % DOX and 61 % CA at pH 7.4 over 7 days, suggesting a higher and targeted drug release in the cancer microenvironment. Cytotoxicity tests revealed selective apoptosis in cancer cells (A549) while maintaining cytocompatibility with normal cells (HEK293).

Comparative study of the efficiency of silicon carbide, boron nitride and carbon nanotube to deliver cancerous drug, azacitidine: A DFT study

Herein we have made a comparative study of the efficiency of three different nanotubes viz. Carbon nanotube (CNT), boron nitride nanotube (BNNT) and silicon carbide nanotube (SiCNT) to deliver the cancerous drug, Azacitidine (AZD). The atomistic description of the encapsulation process of AZD in these nanotubes has been analyzed by evaluating parameters like adsorption energy, electrostatic potential map, reduced density gradient (RDG). Higher adsorption energy of AZD with BNNT (-0.66eV), SiCNT (-0.92eV) compared to CNT (-0.56eV) confirms stronger binding affinity of the drug for the former than the later. Charge density and electrostatic potential map suggest that charge separation involving BNNT and CNT is more prominent than SiCNT. Evaluation of different thermodynamic parameters like Gibbs free energy, enthalpy change revealed that the overall encapsulation process is spontaneous and exothermic in nature and much favorable with BNNT and SiCNT. Stabilizing interactions of the drug with BNNT and SiCNT has been confirmed from RDG analysis. ADMP molecular dynamics simulation supports that the encapsulation process of the drug within the NT at room temperature. These results open up unlimited opportunities for the applications of these NTs as a drug delivery system in the field of nanomedicine.

Study on Doxorubicin Loading on Differently Functionalized Iron Oxide Nanoparticles: Implications for Controlled Drug-Delivery Application

Nanoplatforms applied for the loading of anticancer drugs is a cutting-edge approach for drug delivery to tumors and reduction of toxic effects on healthy cells. In this study, we describe the synthesis and compare the sorption properties of four types of potential doxorubicin-carriers, in which iron oxide nanoparticles (IONs) are functionalized with cationic (polyethylenimine, PEI), anionic (polystyrenesulfonate, PSS), and nonionic (dextran) polymers, as well as with porous carbon. The IONs are thoroughly characterized by X-ray diffraction, IR spectroscopy, high resolution TEM (HRTEM), SEM, magnetic susceptibility, and the zeta-potential measurements in the pH range of 3-10. The degree of doxorubicin loading at pH 7.4, as well as the degree of desorption at pH 5.0, distinctive to cancerous tumor environment, are measured. Particles modified with PEI were shown to exhibit the highest loading capacity, while the greatest release at pH 5 (up to 30%) occurs from the surface of magnetite decorated with PSS. Such a slow release of the drug would imply a prolonged tumor-inhibiting action on the affected tissue or organ. Assessment of the toxicity (using Neuro2A cell line) for PEI- and PSS-modified IONs showed no negative effect. In conclusion, the preliminary evaluation of the effects of IONs coated with PSS and PEI on the rate of blood clotting was carried out. The results obtained can be taken into account when developing new drug delivery platforms.

Cellulose nanofibers as Scaffold-forming materials for thin film drug delivery systems

We explored the potential of cellulose nanofiber (CNF) for designing prolonged-release, thin-film drug delivery systems (TF-DDS). These delivery systems can be used as locally deployable drug-releasing scaffolds for achieving spatial and temporal control over therapeutic concentration in target tissues. Using doxorubicin (DOX) as a model anticancer drug, CNF-based TF-DDS were prepared using different film-formation processes, such as solvent casting and lyophilization. Formulations were prepared with or without the incorporation of additional macromolecular additives, such as gelatin, to include further biomechanical functionality. We studied the films for their mechanical properties, thermal stability, wettability, porosity and in vitro drug release properties. Our experimental results showed that CNF-based films, when prepared via solvent casting method, showed optimized performance in terms of DOX loading, and prolonged-release than those prepared via lyophilization-based fabrication processes. Scanning electron microscopy (SEM) analysis of the CNF-based films showed uniform distribution of fiber entanglement, which provided the scaffolds with sufficient porosity and tortuosity contributing to the sustained release of the drug from the delivery system. We also observed that surface layering of gelatin on CNF films via dip-coating significantly increased the mechanical strength and reduced the wettability of the films, and as such, affected drug release kinetics. The performance of the TF-DDS was evaluated in-vitro against two pancreatic cancer cell lines, i.e. MIA PaCa-2 and PANC-1. We observed that, along with the enhancement of mean dissolution time (MDT) of DOX, CNF-based TF-DDS were able to suppress the proliferation of pancreatic cancer cells in a time-dependent fashion, indicating that the drug liberated from the films were therapeutically active against cancer cells. Additionally, TF-DDS were also tested ex-vivo on patient-derived xenograft (PDX) model of pancreatic ductal adenocarcinoma (PDAC). We observed that DOX released from the TF-DDS was able to reduce Ki-67 positive, pancreatic cancer cells in these models.

Egg-yolk core-shell mesoporous silica nanoparticles for high doxorubicin loading and delivery to prostate cancer cells

Mesoporous silica-based nanoparticles (MSNs) have gained rapid interest as a drug delivery system (DDS) and demonstrated their versatility in delivering drugs for the treatment of various cancers. However, the drug loading efficiency of MSNs is low and is usually improved by improving textural properties through complicated synthesis methods or by post synthesis modification of the surface that can result in the loss of surface area and modify its drug release properties. In this study, we report a direct single-step synthesis of MSNs with a unique egg-yolk core-shell morphology, large pore volume and a hydrophilic surface, decorated with nitrogen rich surface functionalities for increasing its drug loading capacity. This combination of excellent textural properties and surface functionalisation was achieved by a simple soft templating method using dual surfactants and the silica sources assisted by employing either triethylamine (TEA) or triethanolamine (TEO) as the hydrolysis agent. The morphology and well-ordered mesoporous structure can simply be tuned by changing the pH of the synthesis medium that affects the self-assembly mechanism of the micelles. HRTEM image of samples clearly revealed an egg-yolk core-shell morphology with a thin mesoporous silica shell. The optimised MSN samples synthesized at a pH of 11 using either TEA or TEO depicted a higher doxorubicin (Dox) loading capacity of 425 μg mg^-1 and 481 μg mg^-1 respectively, as compared to only 347 μg mg^-1 for MSN samples due to the uniform distribution of nitrogen functionalities. The anticancer activity of Dox loaded MSNs evaluated in two different prostate cancer cell lines (PC-3 and LNCaP) showed a higher cytotoxicity of the drug loaded on optimised MSN samples as compared to pristine MSNs without affecting the cellular uptake of the particles. These results suggest that the unique single-step synthesis and functionalisation method resulted in successfully achieving higher drug loading in egg-yolk core-shell nitrogen functionalised MSNs and could be implemented as an effective carrier of chemotherapeutic drugs.

Continuum Modelling for Encapsulation of Anticancer Drugs inside Nanotubes

Nanotubes, such as those made of carbon, silicon, and boron nitride, have attracted tremendous interest in the research community and represent the starting point for the development of nanotechnology. In the current study, the use of nanotubes as a means of drug delivery and, more specifically, for cancer therapy, is investigated. Using traditional applied mathematical modelling, I derive explicit analytical expressions to understand the encapsulation behaviour of drug molecules into different types of single-walled nanotubes. The interaction energies between three anticancer drugs, namely, cisplatin, carboplatin, and doxorubicin, and the nanotubes are observed by adopting the Lennard–Jones potential function together with the continuum approach. This study is focused on determining a favourable size and an appropriate type of nanotube to encapsulate anticancer drugs. The results indicate that the drug molecules with a large size tend to be located inside a large nanotube and that encapsulation depends on the radius and type of the tube. For the three nanotubes used to encapsulate drugs, the results show that the nanotube radius must be at least 5.493 Å for cisplatin, 6.452 Å for carboplatin, and 10.208 Å for doxorubicin, and the appropriate type to encapsulate drugs is the boron nitride nanotube. There are some advantages to using different types of nanotubes as a means of drug delivery, such as improved chemical stability, reduced synthesis costs, and improved biocompatibility.

Polymeric Composite Matrix with High Biobased Content as Pharmaceutically Relevant Molecular Encapsulation and Release Platform

Drug delivery systems (DDS) that can temporally control the rate and extent of release of therapeutically active molecules find applications in many clinical settings, ranging from infection control to cancer therapy. With an aim to design a locally implantable, controlled-release DDS, we demonstrated the feasibility of using cellulose nanocrystal (CNC)-reinforced poly (l-lactic acid) (PLA) composite beads. The performance of the platform was evaluated using doxorubicin (DOX) as a model drug for applications in triple-negative breast cancer. A facile, nonsolvent-induced phase separation (NIPS) method was adopted to form composite beads. We observed that CNC loading within these beads played a critical role in the mechanical stability, porosity, water uptake, diffusion, release, and pharmacological activity of the drug from the delivery system. When loaded with DOX, composite beads significantly controlled the release of the drug in a pH-dependent pattern. For example, PLA/CNC beads containing 37.5 wt % of CNCs showed a biphasic release of DOX, where 41 and 82% of the loaded drug were released at pH 7.4 and pH 5.5, respectively, over 7 days. Drug release followed Korsmeyer's kinetics, indicating that the release mechanism was mostly diffusion and swelling-controlled. We showed that DOX released from drug-loaded PLA/CNC composite beads locally suppressed the growth and proliferation of triple-negative breast cancer cells, MBA-MB-231, via the apoptotic pathway. The efficacy of the DDS was evaluated in human tissue explants. We envision that such systems will find applications for designing biobased platforms with programmed stability and drug delivery functions.

Theoretical investigation of favipiravir antiviral drug based on fullerene and boron nitride nanocages

Smart implementation of novel advanced nanocarriers such as functionalized C₂₄ and B₁₂N₁₂ nanocages is used supplement for antiviral activity 5-Fluoro-2-hydroxypyrazine-3-carboxamide (Favipiravir; Avigan; T-705), as treatment of COVID-19. The interaction energies of Favipiravir with perfect (B₁₂N₁₂ and C₂₄) and doped (BC₂₃ and CB₁₁N₁₂) nanocages were studied at temperatures equal to 310.15 K and 298.15 K using DFT. Our results have shown that the interaction of the Favipiravir (C[bond, double bond]O group) with BC₂₃ and CB₁₁N₁₂ is more favorable than with the C₂₄ and B₁₂N₁₂ nanocages in the gas and aqueous environments. Additionally, the natural bond orbital, the highest occupied molecular orbital (HOMO), the lowest unoccupied molecular orbital (LUMO), energy gap, chemical reactivity, molecular electrostatic potential, and thermodynamic parameters of the optimized structure have been examined. Furthermore, the UV-Vis and infrared spectroscopy have been evaluated for the investigation of the molecular orbitals Participated in the absorption spectrum of the Favipiravir before and after the interaction with the C₂₄, BC₂₃, B₁₂N_12, and CB₁₁N₁₂, sites at maximum wavelength utilizing the time-dependent density functional theory (TD-B3LYP and TD-CAM-B3LYP). The intermolecular interactions have been analyzed by non-covalent interactions (NCI) and also, the electron localization function (ELF) is discussed.

Loading and release of cancer chemotherapy drugs utilizing simultaneous temperature and pH-responsive nanohybrid

BACKGROUND

Recently, the development of nanocarriers and the improvement of their biochemical properties have became of great importance. Single-walled carbon nanotubes (SWCNT) have many applications in drug delivery systems (DDS) as a common carbon-based structure. In the current work, the penetration, co-loading, and co-release of Doxorubicin (DOX) and Paclitaxel (PAX), as two cancer chemotherapy agents, were investigated using a novel modified copolymer with functionalized SWCNT.

RESULTS

This study proposes a dual-responsive smart carrier that is sensitive to pH and temperature. The carrier consists of functionalized SWNT and Dimethyl acrylamide-trimethyl chitosan (DMAA-TMC) grafting on SWCNT. This suggested carrier was investigated by utilizing molecular simulations. Interaction energies between DOX, PAX, and carrier as well as the affinity of drugs to the nanocarrier were studied. The energy analysis of drug release and adsorption presented that DOX and PAX delivery using this carrier is selective and sensitive at healthy and cancerous conditions. The attraction of DMAA-TMC, as a biodegradable and biocompatible copolymer, with SWCNT showed that degradation mechanism in acidic environment deformed the copolymer. This leads to a smart release mechanism in an acidic cancerous tissue. Additionally, it improves hydrophilicity, optimum nano-particle size, and cell cytotoxicity concerns.

CONCLUSIONS

The simulation results manifested a significant contribution of DMAA-TMC in the adsorption and release of cancer chemotherapy drugs in normal and neoplastic tissues. The interaction of copolymer also improves the biocompatibility and biodegradability of the SWCNT. Smart drug delivery carrier can be a valuable nanohybrid for loading, transporting, and releasing of cancer chemotherapy drugs.

Silicane Derivative Increases Doxorubicin Efficacy in an Ovarian Carcinoma Mouse Model: Fighting Drug Resistance

The development of cancer resistance continues to represent a bottleneck of cancer therapy. It is one of the leading factors preventing drugs to exhibit their full therapeutic potential. Consequently, it reduces the efficacy of anticancer therapy and causes the survival rate of therapy-resistant patients to be far from satisfactory. Here, an emerging strategy for overcoming drug resistance is proposed employing a novel two-dimensional (2D) nanomaterial polysiloxane (PSX). We have reported on the synthesis of PSX nanosheets (PSX NSs) and proved that they have favorable properties for biomedical applications. PSX NSs evinced unprecedented cytocompatibility up to the concentration of 300 μg/mL, while inducing very low level of red blood cell hemolysis and were found to be highly effective for anticancer drug binding. PSX NSs enhanced the efficacy of the anticancer drug doxorubicin (DOX) by around 27.8-43.4% on average and, interestingly, were found to be especially effective in the therapy of drug-resistant tumors, improving the effectiveness of up to 52%. Fluorescence microscopy revealed improved retention of DOX within the drug-resistant cells when bound on PSX NSs. DOX bound on the surface of PSX NSs, i.e., PSX@DOX, improved, in general, the DOX cytotoxicity in vitro. More importantly, PSX@DOX reduced the growth of DOX-resistant tumors in vivo with 3.5 times better average efficiency than the free drug. Altogether, this paper represents an introduction of a new 2D nanomaterial derived from silicane and pioneers its biomedical application. As advances in the field of material synthesis are rapidly progressing, novel 2D nanomaterials with improved properties are being synthesized and await thorough exploration. Our findings further provide a better understanding of the mechanisms involved in the cancer resistance and can promote the development of a precise cancer therapy.

Doxorubicin Encapsulation in Carbon Nanotubes Having Haeckelite or Stone-Wales Defects as Drug Carriers: A Molecular Dynamics Approach

Doxorubicin (DOX), a recognized anticancer drug, forms stable associations with carbon nanotubes (CNTs). CNTs when properly functionalized have the ability to anchor directly in cancerous tumors where the release of the drug occurs thanks to the tumor slightly acidic pH. Herein, we study the armchair and zigzag CNTs with Stone-Wales (SW) defects to rank their ability to encapsulate DOX by determining the DOX-CNT binding free energies using the MM/PBSA and MM/GBSA methods implemented in AMBER16. We investigate also the chiral CNTs with haeckelite defects. Each haeckelite defect consists of a pair of square and octagonal rings. The armchair and zigzag CNT with SW defects and chiral nanotubes with haeckelite defects predict DOX-CNT interactions that depend on the length of the nanotube, the number of present defects and nitrogen doping. Chiral nanotubes having two haeckelite defects reveal a clear dependence on the nitrogen content with DOX-CNT interaction forces decreasing in the order 0N > 4N > 8N. These results contribute to a further understanding of drug-nanotube interactions and to the design of new drug delivery systems based on CNTs.

Novel pH-responsive nanohybrid for simultaneous delivery of doxorubicin and paclitaxel: an in-silico insight

BACKGROUND

The distribution of drugs could not be controlled in the conventional delivery systems. This has led to the developing of a specific nanoparticle-based delivery system, called smart drug delivery systems. In cancer therapy, innovative biocompatible nanocarriers have received much attention for various ranges of anti-cancer drugs. In this work, the effect of an interesting and novel copolymer named "dimethyl acrylamide-trimethyl chitosan" was investigated on delivery of paclitaxel and doxorubicin applying carboxylated fullerene nanohybrid. The current study was run via molecular dynamics simulation and quantum calculations based on the acidic pH differences between cancerous microenvironment and normal tissues. Furthermore, hydrogen bonds, radius of gyration, and nanoparticle interaction energies were studied here. Stimulatingly, a simultaneous pH and temperature-responsive system were proposed for paclitaxel and doxorubicin for a co-polymer. A pH-responsive and thermal responsive copolymer were utilized based on trimethyl chitosan and dimethyl acrylamide, respectively. In such a dualistic approach, co-polymer makes an excellent system to possess two simultaneous properties in one bio-polymer.

RESULTS

The simulation results proposed dramatic and indisputable effects of the copolymer in the release of drugs in cancerous tissues, as well as increased biocompatibility and drug uptake in healthy tissues. Repeated simulations of a similar article performed for the validation test. The results are very close to those of the reference paper.

CONCLUSIONS

Overall, conjugated modified fullerene and dimethyl acrylamide-trimethyl chitosan (DMAA-TMC) as nanohybrid can be an appropriate proposition for drug loading, drug delivery, and drug release on dual responsive smart drug delivery system.

Insights of doxorubicin loaded graphene quantum dots: Synthesis, DFT drug interactions, and cytotoxicity

Carbon nanomaterials (CNMs) such as graphene quantum dots (GQDs), graphene oxide nanosheets (GO), single and multiwalled carbon nanotubes (SWCNTs, MWCNTs) exhibit different drug loading capacities, release rates, and targeting abilities. This explains the reported discrepancy of their associated therapeutic efficiencies when used as drug carrier systems. In this study, for the first time, two different types of GQDs named GQDs1 and GQDs2 were synthesized, fully characterized, loaded with the chemotherapeutic Doxorubicin (DOX) and compared with other CNMs under the same conditions. The effects of shape (spheres, tubes and sheets), size (30-180 nm), and surface charge (-64.9 to -11.85 mv) of the synthesized CNMs on DOX loading and release efficiency as well as cytotoxicity against MCF-7 cells were investigated. Furthermore, the biosafety of the synthesized GQDs was studied both at the in vitro level using human WI-38 cells and at the in vivo level at low and high doses of 5 and 20 mg/Kg using healthy female Wister rats. Results revealed that GO nanosheets showed the highest DOX loading capacity reaching 2.85 mg/mg while GQDs1 exhibited the highest release rate of 78.1%. The in vitro cytotoxicity evaluation indicated that the smallest spherical nanomaterial among the tested CNMs, namely GQDs1 was the most efficient one on delivering DOX into the cells and inhibiting their proliferation. Regarding the biosafety, all CNMs displayed no noticeable cytotoxicity against WI-38, except for GQDs2. Moreover, hematological, biochemical and histological assessment of both kidneys and livers of treated rats assured the high biosafety level. We also present new insights on the first principle calculations investigating the adsorption of DOX on GO and GQDs. The calculations showed that DOX molecules adsorbed almost equally on both nanoforms, however, the flaky nature of our GO monolayers allowed for sandwich-like structures to exist making its loading capacity superior over GQDs. Based on this comprehensive study, GQDs is the most promising type of the tested CNMs to be used in further studies.

Effects of the Molecular Weight of Hyaluronic Acid in a Carbon Nanotube Drug Delivery Conjugate

Hyaluronic acid (HA) is a ubiquitous biopolymer involved in many pathophysiological roles. One HA receptor, the cluster of differentiation CD44 protein, is often overexpressed in tumor cells. As such, HA has attracted considerable interest in the development of drug delivery formulations, given its intrinsic targetability toward CD44 overexpressing cells. The present study is focused on examining the correlation of HA molecular weight with its targetability properties. A library of conjugates obtained by linking the amino group of the phospholipid 1,2-dimyristoyl-sn-glycero-3-phosphoethanolamine (DMPE) to the carboxylic residues of HA of different molecular weight (6.4, 17, 51, 200, and 1,500 kDa) were synthesized and fully characterized. The HA-DMPE conjugates were then used to non-covalently functionalize the highly hydrophobic single-walled carbon nanotubes (CNT), and further encapsulate the anticancer drug doxorubicin (DOX). Our results show that the complexes DOX/CNT/HA-DMPE maintain very good and stable dispersibility. Drug release studies indicated a pH-responsive release of the drug from the nanocarrier. Cell viability tests demonstrated that all HA modified CNTs have good biocompatibility, and specific targeting toward cells overexpressing the CD44 receptor. Among all the molecular weights tested, the 200 kDa HA showed the highest increase in cellular uptake and cytotoxic activity. All these promising attributes make CNT/HA₂₀₀-DMPE a “smart” platform for tumor-targeted delivery of anticancer agents.

Molecular mechanism for the encapsulation of the doxorubicin in the cucurbit[n]urils cavity and the effects of diameter, protonation on loading and releasing of the anticancer drug:Mixed quantum mechanical/ molecular dynamics simulations

BACKGROUND AND OBJECTIVES

Doxorubicin is a common apoptotic chemotherapeutic which has shown an obvious inhibitory effect in cancer chemotherapy. Here, cucurbit[n]urils (n = 7,10) have been proposed as a doxorubicin carrier, and the effects of diameter, protonation on loading and releasing of the anticancer drug doxorubicin has been studied.

METHODS

The Density Functional Theory (DFT) calculation and Molecular Dynamics (MD) simulation are performed to study the adsorption process of the (guest) Doxorubicin molecule in the neutral and protonated states within the (host) cucurbit[n]urils (n = 7,10).

RESULTS

DFT results show that the adsorption process in water is thermodynamically favorable. It is found that the binding energies for protonated drug encapsulation in cucurbit[n]urils are weaker than those of the neutral drug, implying the protonation of doxorubicin can promote the drug release from the adsorption situation. The electron density values and their Laplacian are evaluated to identify the nature of the intermolecular interactions through the topological parameters using the Bader's theory of atoms in molecules. Furthermore, the natural bond orbital analysis shows that the electrons aretransferred from cucurbit[n]urils to drug in all complexes. MD simulation results indicate that value of drug diffusion coefficient is small, therefore, we expect DOX to be slowly released from the CB cavity.

CONCLUSIONS

Based on obtained results, cucurbit[n]urils may be a prominent nano-carrier to loading and release drug on to target cells.

Single-molecule brightness analysis for the determination of anticancer drug interactions with DNA

Anthracyclines are one of the most studied anticancer drugs approved for medical treatment. The equilibrium constant (K) of the reaction between these drugs with DNA in both in vitro and in vivo experiments lacks consensus. The K values vary from 10⁴ up to 10⁸ M^-1, which suggest a 1000-fold error in determining the effective concentration needed to form the drug-DNA complex. Until 2014, only one study by García [J. Phys. Chem. B, 2014, 118, 1288-1295] showed that the binding of anthracycline representative doxorubicin occurs in two reactions. We support this result by brightness analysis at a single molecular level for the four most common anthracyclines: doxorubicin, daunorubicin, epirubicin, and idarubicin.

Facile synthesis of hollow mesoporous nickel sulfide nanoparticles for highly efficient combinatorial photothermal-chemotherapy of cancer

Traditional techniques for the synthesis of nickel sulfide (NiS) nanoparticles (NPs) always present drawbacks of morphological irregularity, non-porous structure and poor long-term stability, which are extremely unfavorable for establishing effective therapeutic agents. Here, a category of hollow mesoporous NiS (hm-NiS) NPs with uniform spherical structure and good aqueous dispersity were innovatively developed based on a modified solvothermal reaction technique. Upon the successful synthesis of hm-NiS NPs, dopamine was seeded and in situ polymerized into polydopamine (PDA) on the NP surface, followed by functionalization with thiol-polyethylene glycol (SH-PEG) and encapsulation of the chemotherapeutic drug, doxorubicin (DOX), to form hm-NiS@PDA/PEG/DOX (NiPPD) NPs. The resultant NiPPD NPs exhibited a decent photothermal response and stability, attributed to the optical absorption of the hm-NiS nanocore and PDA layer in the near-infrared (NIR) region. Furthermore, stimulus-responsive drug release was achieved under both acidic pH conditions and NIR laser irradiation, owing to the protonation of -NH₂ groups in the DOX molecules and local thermal shock, respectively. Lastly, a strong combinatorial photothermal-chemotherapeutic effect was demonstrated for tumor suppression with minimal systemic toxicity in vivo. Collectively, this state-of-the-art paradigm may provide useful insights to deepen the application of hm-NiS NPs for disease management and precision medicine.

Azomethine ylide addition impact on functionalized [60]Fullerene and [60]Boron-Nitride: Anticancer Doxorubicin and Boronic Chalcone drugs binding characteristics with mono- and bis-nanocarriers

By functionalizing [60]Fullerene (C60) and [60]Boron-Nitride ([60]BN), novel systems are proposed under two alternatives according to the intruder localization modes. To detail their bindings with Doxorubicin (DOX) and Boronic Chalcone (BCHA), we studied the azomethine ylide (AZMYtrp and AZMYtyr) addition impact on the drug-loading efficacy. As a result, the formation of reactive [60]CBNAZMYtrp nanocarriers mainly proceeded through photoexcitation on the triplet state, in contrast to those of [60]BNCAZMYtrp. The addition of amino acids strongly improved the interaction between DOX/BCHA and mono- and bis-nanocarriers compared to isolated anticancer drugs randomly dispersed in the solvent. Eight possible bis-nanocarriers regioisomers are cheeked for the second AZMYtrp addition sites. In fact, the trans1 isomer is considered as the most stable to adsorb DOX-DOX, DOX-BCHA or BCHA-BCHA with mole fraction of about 84 %. The lowest electronic bandgap (0.529 eV) of B25N25C10AZMYtyrAZMYtyr confirmed that the presence of hydrogen-bonding and OH-π, CH-π and CO-π interactions improved the binding affinity of bis-nanocarriers with DOX-DOX. The AZMYtrp indole ring hydrogen is bonded with the anticancer drug hydroxyl group and stabilized DOX-DOX-bis-nanocarriers complexes. The formation of new sp³ regions and π-π interactions with the carbon-doped [60]BN decreased the bandgap (0.64 eV) and stabilized the B25N25C10AZMYtyrAZMYtyr-DOX-BCHA complex.

Hollow Mesoporous Bi@PEG-FA Nanoshell as a Novel Dual-Stimuli-Responsive Nanocarrier for Synergistic Chemo-Photothermal Cancer Therapy

The development of stimuli-responsive multifunctional nanocarriers for therapeutic drug delivery is extremely desirable for highly specific treatment of disease. Herein, thiol-polyethylene glycol-folate acid-modified hollow mesoporous bismuth nanoshells (HM-Bi@PEG-FA NSs) were developed as the new dual-stimuli-responsive single-"elemental" photothermal nanocarriers for synergistic chemo-photothermal therapy of tumor. The designed hollow-mesoporous-type nanocarriers present excellent photothermal conversion capacity (∼34.72%) and good biocompatibility. Meanwhile, acidic pH and near-infrared (NIR) laser dual-stimulated doxorubicin (DOX) release is successfully achieved. More importantly, the DOX-loaded HM-Bi@PEG-FA NSs hold an efficient in vitro/in vivo antitumor effect through the synergistic chemo-photothermal therapy. Therefore, our findings provide the possibility of designing a dual-stimuli-responsive hollow mesoporous Bi-based photothermal nanocarrier for synergistically enhanced antitumor therapy.

Graphdiyne Micromotors in Living Biomedia

Graphdiyne (GDY), a new kind of two-dimensional (2D) material, was combined with micromotor technology for "on-the-fly" operations in complex biomedia. Microtubular structures were prepared by template deposition on membrane templates, resulting in functional structures rich in sp and sp² carbons with highly conjugated π networks. This resulted in a highly increased surface area for a higher loading of anticancer drugs or enhanced quenching ability over other 2D based micromotors, such as graphene oxide (GO) or smooth tubular micromotors. High biocompatibility with almost 100 % cell viability was observed in cytotoxicity assays with moving micromotors in the presence of HeLa cells. On a first example, GDY micromotors loaded with doxorubicin (DOX) were used for pH responsive release and HeLa cancer cells killing. The use of affinity peptide engineered GDY micromotors was also illustrated for highly sensitive and selective fluorescent OFF-ON detection of cholera toxin B through specific recognition of the subunit B region of the target toxin. The new developments illustrated here offer considerable promise for the use of GDY as part of micromotors in living biosystems.

Carbon Nanotubes Having Haeckelite Defects as Potential Drug Carriers. Molecular Dynamics Simulation

Carbon nanotubes (CNTs) are valuable drug carriers since when properly functionalized they transport drugs and anchor directly to cancerous tumors whose more acidic pH causes the drug release. Herein, we study the so-called zigzag and armchair CNTs with haeckelite defects to rank their ability to adsorb doxorubicin (DOX) by determining the DOX-CNT binding free energies using the MM/PBSA and MM/GBSA methods implemented in AMBER. Our results reveal stronger DOX-CNT interactions for encapsulation of the drug inside the nanotube compared to its adsorption onto the defective nanotube external surface. Armchair CNTs with one and two defects exhibit better results compared with those with four and fifteen defects. Each haeckelite defect consists of a pair of square and octagonal rings. DOX-CNT binding free energies are predicted to be dependent on: (i) nanotube chirality and diameter, (ii) the number of defects, (iii) nitrogen doping and (iv) the position of the encapsulated DOX inside the nanotube. Armchair (10,10) nanotubes with two haeckelite defects, doped with nitrogen, exhibit the best drug-nanotube binding free energies compared with zigzag and fully hydrogenated nanotubes and, also previously reported ones with bumpy defects. These results contribute to further understanding drug-nanotube interactions and their potential application to the design of new drug delivery systems.

Investigation of Adsorption Tyrphostin AG528 Anticancer Drug Upon the CNT(6,6-6) Nanotube: A DFT Study

OBJECTIVE

In the present study, the interaction between drug Tyrphostin AG528 and CNT(6,6-6) nanotube by Density Functional Theory (DFT) calculations in solvent water has been investigated for the first time.

METHODS AND RESULTS

According to the calculations, intermolecular hydrogen bonds take place between an active position of the molecule Tyrphostin AG528 and hydrogen atoms of the nanotube which play an important role in the stability of complex CNT(6,6- 6)/Tyrphostin AG528. The non-bonded interaction effects of the molecule Tyrphostin AG528 with CNT(6,6-6) nanotube on the electronic properties, chemical shift tensors and natural charge have also been detected. The natural bond orbital (NBO) analysis suggested that the molecule Tyrphostin AG528 as an electron donor and the CNT(6,6-6) nanotube play the role of an electron acceptor at the complex CNT(6,6-6)/Tyrphostin AG528.

CONCLUSION

The electronic spectra of the Tyrphostin AG528 drug and complex CNT(6,6-6)/Tyrphostin AG528 in solvent water were calculated by Time-Dependent Density Functional Theory (TD-DFT) for the investigation of adsorption effect of the Tyrphostin AG528 drug over nanotube on maximum wavelength. Then, the possibility of the use of CNT(6,6-6) nanotube for Tyrphostin AG528 delivery to the diseased cells has been established.

Carbon Nanotubes as A High-Performance Platform for Target Delivery of Anticancer Quinones

BACKGROUND

In spite of considerable efforts of researchers the cancer deseases remain to be incurable and a percentage of cancer deseases in the structure of mortality increases every year. At that, high systemic toxicity of antitumor drugs hampers their effective use. Because of this fact, the development of nanosystems for targeted delivery of antitumor drugs is one of the leading problem in nanomedicine and nanopharmacy.

OBJECTIVE

To critically examine the modern strategies for carbon nanotubes (CNTs)-based delivery of anticancer quinones and to summarize the mechanisms which can provide high effectiveness and multifunctionality of the CNT-based quinone delivery platform.

RESULTS

Quinones, including anthracycline antibiotics - doxorubicin and daunorubicin, are among the most prospective group of natural and syntetic compounds which exhibit high antitumor activity against different type of tumors. In this review, we focus on the possibilities of using CNTs for targeted delivery of antitumor compounds with quinoid moiety which is ordinarily characterized by high specific interaction with DNA molecules. Quinones can be non-covalently adsorbed on CNT surface due to their aromatic structure and π-conjugated system of double bonds. The characteristic features of doxorubicine-CNT complex are high loading efficiency, pH-dependent release in acidic tumor microenviroment, enough stability in biological fluid. Different types of CNT functionalization, targeting strategies and designs for multifunctional CNT-based doxorubicine delivery platform are disscussed.

CONCLUSION

Nanosystems based on functionalized CNTs are very promising platform for quinone delivery resulting in significant enhancement of cancer treatment efficiency. Functionalization of CNTs with the polymeric shell, especially DNA-based shells, can provide the greatest affinity and mimicry with biological structures.

Understanding the co-loading and releasing of doxorubicin and paclitaxel using chitosan functionalized single-walled carbon nanotubes by molecular dynamics simulations

Two widely used anticancer drugs, doxorubicin (DOX) and paclitaxel (PTX), possess distinct physical properties and chemotherapy specificity. In order to investigate their interaction mechanism with single-walled carbon nanotubes (SWCNTs), co-loading and releasing from the SWCNTs, all-atom molecular dynamics (MD) simulations were firstly carried out for different SWCNT systems, followed by binding free energy calculation with MM-PBSA. The results indicate that the co-loading of DOX and PTX onto the pristine SWCNT is exothermic and spontaneous. The DOX molecules predominantly interact with the SWCNT via π-π stacking through the conjugated aromatic rings, while the separated aromatic rings of PTX also primarily interact with the SWCNT through π-π stacking yet supplemented by an X-π (X = C-H, N-H and C[double bond, length as m-dash]O) interaction. Moreover, the strongest binding of DOX and PTX with the pristine SWCNT shows similar strength (ΔG: -32.0 vs. -33.8 kcal mol-1). For the chitosan functionalized SWCNT (f-SWCNT), the DOX and PTX molecules still prefer binding to the sidewall of the CNT rather than binding with the polymer, and the non-covalent functionalization of the SWCNT with chitosan decreases the binding of DOX and PTX with the sidewall of the f-SWCNT as compared with the DOX/PTX-SWCNT system (ΔG: -24.0 and -21.9 kcal mol-1). The protonation of chitosan and drug molecules further weakens the interaction between DOX/PTX and the f-SWCNT, and shows a consequent displacement of the drug molecules, triggering the release of the drugs. The variation of binding strength of the three systems (DOX/PTX-SWCNT, DOX/PTX-f-SWCNT, and DOXH+/PTXH+-f-SWCNT) was also discussed in terms of the histogram or frequency of the distance from the drugs to the SWCNT. In addition, the encapsulation of two DOX molecules by the f-SWCNT is considerably stronger than the binding of the other six drug molecules to the sidewall, indicating that the encapsulation of anticancer drugs may also play a very important role and should be considered in the drug delivery.

Stimuli responsive PEGylated bismuth selenide hollow nanocapsules for fluorescence/CT imaging and light-driven multimodal tumor therapy

PEGylated bismuth selenide hollow nanocapsules encapsulating doxorubicin and chlorin e6 for fluorescence/CT imaging and light-driven multimodal tumor therapy.

Structural, optoelectronic and charge transport properties of the complexes of indigo encapsulated in carbon nanotubes

Using the dispersion-corrected density functional B97D and 6-31g(d,p) basis set, the structural, stability, electronic, optical and charge transport properties of the complexes formed by encapsulating indigo inside carbon nanotubes (CNTs) of varying diameters are investigated. Based on the stabilization energy of the complexes indigo@(n,n)CNT (where n = 6, 7 and 8), indigo@(7,7)CNT is shown to be the most stable owing to the ideal diameter of (7,7)CNT for encapsulating indigo. The nature of the interaction between the guest and the host is investigated by means of energy decomposition analysis employing the symmetry adapted perturbation theory. Electronic properties such as the ionization energy, the electron affinity and the energy gap between the highest occupied and lowest unoccupied molecular orbitals (ΔEH-L) of the complexes are determined. The low values of ΔEH-L (<1 eV) for the complexes suggest that they can act as narrow energy gap semiconductors. All the complexes exhibit high hole and electron mobilities which vary inversely with respect to the diameter of the CNT. Using the time-dependent density functional theoretical method, the absorption properties are predicted for the most stable complex indigo@(7,7)CNT. The presence of charge transfer peaks in the visible and near-infrared regions of the electromagnetic spectrum suggests that the complexes are suitable for optoelectronic devices such as solar cells.

Decrease in paracellular permeability and chemosensitivity to doxorubicin by claudin-1 in spheroid culture models of human lung adenocarcinoma A549 cells

Chemotherapy resistance is a major problem in the treatment of cancer, but the underlying mechanisms are not fully understood. We found that the expression levels of claudin-1 (CLDN1) and 3, tight junctional proteins, are upregulated in cisplatin (CDDP)-resistant human lung adenocarcinoma A549 (A549R) cells. A549R cells showed cross-resistance to doxorubicin (DXR). Here, the expression mechanism and function of CLDN1 and 3 were examined. CLDN1 and 3 were mainly localized at tight junctions concomitant with zonula occludens (ZO)-1, a scaffolding protein, in A549 and A549R cells. The phosphorylation levels of Src, MEK, ERK, c-Fos, and Akt in A549R cells were higher than those in A549 cells. The expression levels of CLDN1 and 3 were decreased by LY-294002, a phosphoinositide 3-kinase (PI3K) inhibitor, and BAY 11-7082, an NF-κB inhibitor. The overexpression of CLDN1 and 3 decreased the paracellular permeability of DXR in A549 cells. Hypoxia levels in A549R and CLDN1-overexpressing cells (CLDN1/A549) were greater than those in A549, mock/A549, and CLDN3/A549 cells in a spheroid culture model. In contrast, accumulation in the region inside the spheroids and the toxicity of DXR in A549R and CLDN1/A549 cells were lower than those in other cells. Furthermore, the accumulation and toxicity of DXR were rescued by CLDN1 siRNA in A549R cells. We suggest that CLDN1 is upregulated by CDDP resistance through activation of a PI3K/Akt/NF-κB pathway, resulting in the inhibition of penetration of anticancer drugs into the inner area of spheroids.

Multimodal, pH Sensitive, and Magnetically Assisted Carrier of Doxorubicin Designed and Analyzed by Means of Computer Simulations

This work deals with an analysis of drugs carriers based on the structure of a carbon nanotube using large-scale atomistic molecular dynamics simulations. The analyzed systems link several functions in a single architecture. They are as follows: (i) the sidewalls and tips of carbon nanotubes are covalently functionalized by polyethylene glycol-folic acid conjugates, and this approach allows for creation of hydrophytic and biocompatible systems; (ii) doxorubicin is kept in the internal space of a carbon nanotube as a mixture with dyes (p-phenylenediamine or neutral red)-it allows for pH-controlled release or alteration of the interaction topology; (iii) the mixture of doxorubicin and dyes in the nanotube interior is additionally sealed by fullerene nanoparticles which act as pistons at acidic pH and loosen the tangle of polyethylene glycol chains at the nanotube tips. This enhances the release of doxorubicin from the nanotube when compared to the analogous system but without the fullerene caps; (iv) another function of the carrier can be activated by filling of the fullerenes by magnetic material-then, the carrier can be visualized by means of magnetic resonance imaging, it can realize magnetic hyperthermia of tumor cells, and intense rotation of the nanoparticles can be induced by the application of an external magnetic field. That rotation enhances the release of doxorubicin from the nanotube and leads to the increase of the rotational temperature. The studies show that the proposed design of the drug-doxorubicin carrier reveals very promising properties. Its fabrication is absolutely feasible, as all individual stages necessary for its construction have been confirmed in the literature.

Pegylated and folic acid functionalized carbon nanotubes as pH controlled carriers of doxorubicin. Molecular dynamics analysis of the stability and drug release mechanism

This work deals with an analysis of the covalent functionalization of a carbon nanotube using polyethylene glycol chains terminated by folic acid fragments. The analysis is focused on theoretical predictions, using molecular dynamics simulations, of the properties of such constructs as pH controlled carriers of the anticancer drug doxorubicin. The analyzed systems are expected to hold the doxorubicin in the inner cavity of the carbon nanotube at neutral pH and unload the drug at slightly acidic pH. This property comes from incorporation into the nanotube of some dye molecules (p-phenylenediamine or neutral red) which undergo protonation at slightly acidic pH. We found that both dyes lead to the formation of a stable, co-absorbed phase of a doxorubicin-dye mixture inside the nanotube at physiological pH. At acidic pH we observed a spontaneous release of dyes from the nanotube, leading finally to the state with only doxorubicin encapsulated in the nanotube interior. Thus, the analyzed constructs can be considered as carriers of doxorubicin that are selective to tumor microenvironments (which exhibit reduced pH due to hypoxia and overexpression of folate receptors). However, we also found that the release of doxorubicin from the nanotube at acidic pH is kinetically blocked, at least in the case of the system sizes studied here. Thus, we also discussed some possible ways of reducing the activation barriers against doxorubicin release at acidic pH.

Sequential Delivery of Doxorubicin and Zoledronic Acid to Breast Cancer Cells by CB[7]-Modified Iron Oxide Nanoparticles

Drug-loaded magnetic nanoparticles were synthesized and used for the sequential delivery of the antiresorptive agent zoledronic acid (Zol) and the cytotoxic drug doxorubicin (Dox) to breast cancer cells (MCF-7). Zol was attached to bare iron oxide nanoparticles (IONPs) via phosphonate coordination to form Z-NPs. The unbound imidazole of Zol was then used to complex the organic macrocycle CB[7] to obtain CZ-NPs. Dox was complexed to the CZ-NPs to form the fully loaded particles (DCZ-NPs), which were stable in solution at 37 °C and physiological pH (7.4). Fluorescence spectroscopy established that Dox is released in solution from DCZ-NPs suddenly (i) when the particles are subjected to magnetically induced heating to 42 °C at low pH (5.0) and (ii) in the presence of glutathione (GSH). Mass spectrometry indicated that Zol is released slowly in solution at low pH after Dox release. Magnetic measurements with a magnetic reader revealed that DCZ-NPs are internalized preferentially by MCF-7 cells versus nonmalignant cells (HEK293). Zol and Dox acted synergistically when delivered by the particles. DCZ-NPs caused a decrease in the viability of MCF-7 cells that was greater than the net decrease caused when the drugs were added to the cells individually at concentrations equivalent to those delivered by the particles. MCF-7 cells were treated with DCZ-NPs and subjected to an alternating magnetic field (AMF) which, with the nanoparticles present, raised the temperature of the cells and triggered the intracellular release of Dox, as indicated by fluorescence activated cell sorting (FACS). The cytotoxic effects of the DCZ-NPs on MCF-7 cells were enhanced 10-fold by AMF-induced heating. DCZ-NPs were also able to completely inhibit MCF-7 cell adhesion and invasion in vitro, indicating the potential of the particles to act as antimetastatic agents. Together these results demonstrate that DCZ-NPs warrant development as a system for combined chemo- and thermo-therapeutic treatment of cancer.

Stepwise growth of gold coated cancer targeting carbon nanotubes for the precise delivery of doxorubicin combined with photothermal therapy

Combining doxorubicin with thermal therapy in the clinic has led to startling results in the treatment of problematic cancers. Here, we describe a multimodal multi-walled carbon nanotube material that combines tumor targeting, doxorubicin delivery, and photothermal therapy for localized cancer treatment. The agent was constructed layer-by-layer from polypyrrole and gold nanoparticles on multi-walled carbon nanotubes. The gold surface was modified with tumor targeting folic acid terminated PEGylated chains, which also provide water-dispersibility, biocompatibility and should extend the half-life in blood. The material has a high loading/unloading capacity for the cytotoxic agent doxorubicin. Release of the doxorubicin, combined with the photothermal properties of the material that induces localized hyperthermia, leads to efficient cancer cell death.

Coadsorption of Doxorubicin and Selected Dyes on Carbon Nanotubes. Theoretical Investigation of Potential Application as a pH-Controlled Drug Delivery System

This work shows results of a theoretical survey, based on molecular dynamics simulation, of potential applicability of doxorubicin coadsorption with various dyes molecules on/in carbon nanotubes as a drug delivery system. The central idea is to take advantage of the dyes charge distribution change upon switching the pH of the environment from neutral (physiological 7.4) to acidic one (∼5.5 which is typical for tumor tissues). This work discusses results obtained for four dye molecules revealing more or less interesting behavior. These were bromothymol blue, methyl red, neutral red, and p-phenylenediamine. All of them reveal pKa in the range 5-7 and thus will undergo protonation in that pH range. We considered coadsorption on external walls of carbon nanotubes and sequential filling of the nanotubes inner hollow space by drug and dyes. The latter approach, with the application of neutral red and p-phenylenediamine as blockers of doxorubicin, led to the most promising results. Closer analysis of these systems allowed us to state that neutral red can be particularly useful as a long-term blocker of doxorubicin encapsulated in the inner cavity of (30,0) carbon nanotube at neutral pH. At acidic pH we observed a spontaneous release of neutral red from the nanotube and unblocking of doxorubicin. We also confirmed, by analysis of free energy profiles, that unblocked doxorubicin can spontaneously leave the nanotube interior at the considered conditions. Thus, that system can realize pH controlled doxorubicin release in acidic environment of tumor tissues.

The dispersion, solubilization and stabilization in “solution” of single-walled carbon nanotubes

Methods for the solubilization and dispersion of single-walled carbon nanotubes in water and organic solvents by physical and chemical methods have been reviewed.

The “click-on-tube” approach for the production of efficient drug carriers based on oxidized multi-walled carbon nanotubes

An efficient drug delivery system through a straightforward approach to multi-walled carbon nanotube decoration.