Elucidating Structural Disorder in Ultra-Thin Bi-Rich Bismuth Oxyhalide Photocatalysts

Advancing the field of photocatalysis requires the elucidation of structural properties that underpin the photocatalytic properties of promising materials. The focus of the present study is layered, Bi-rich bismuth oxyhalides, which are widely studied for photocatalytic applications yet poorly structurally understood, due to high levels of disorder, nano-sized domains, and the large number of structurally similar compounds. By connecting insights from multiple scattering techniques, utilizing electron-, X-ray- and neutron probes, the crystal phase of the synthesized materials is allocated as layered Bi24O31X10 (X = Cl, Br), albeit with significant deviation from the reported 3D crystalline model. The materials comprise anisotropic platelet-shaped crystalline domains, exhibiting significant in-plane ordering in two dimensions but disorder and an ultra-thin morphology in the layer stacking direction. Increased synthesis pH tailored larger, more ordered crystalline domains, leading to longer excited state lifetimes determined via femtosecond transient absorption spectroscopy (fs-TAS). Although this likely contributes to improved photocatalytic properties, assessed via the photooxidation of benzylamine, increasing the overall surface area facilitated the most significant improvement in photocatalytic performance. This study, therefore, enabled both phase allocation and a nuanced discussion of the structure-property relationship for complicated, ultra-thin photocatalysts.

Visible-Light-Active Iodide-Doped BiOBr Coatings for Sustainable Infrastructure

The search for efficient materials for sustainable infrastructure is an urgent challenge toward potential negative emission technologies and the global environmental crisis. Pleasant, efficient sunlight-activated coatings for applications in self-cleaning windows are sought in the glass industry, particularly those produced from scalable technologies. The current work presents visible-light-active iodide-doped BiOBr thin films fabricated using aerosol-assisted chemical vapor deposition. The impact of dopant concentration on the structural, morphological, and optical properties was studied systematically. The photocatalytic properties of the parent materials and as-deposited doped films were evaluated using the smart ink test. An optimized material was identified as containing 2.7 atom % iodide dopant. Insight into the photocatalytic behavior of these coatings was gathered from photoluminescence and photoelectrochemical studies. The optimum photocatalytic performance could be explained from a balance between photon absorption, charge generation, carrier separation, and charge transport properties under 450 nm irradiation. This optimized iodide-doped BiOBr coating is an excellent candidate for the photodegradation of volatile organic pollutants, with potential applications in self-cleaning windows and other surfaces.

A review on the progress of the photocatalytic removal of refractory pollutants from water by BiOBr-based nanocomposites

Organic matters from various sources such as the manufacturing, agricultural, and pharmaceuticals industries is continuously discharged into water bodies, leading to increasingly serious water pollution. Photocatalytic technology is a clean and green advanced oxidation process, that can successfully decompose various organic pollutants into small inorganic molecules such as carbon dioxide and water under visible light irradiation. Bismuth oxybromide (BiOBr) is an attractive visible light photocatalyst with good photocatalytic performance, suitable forbidden bandwidth, and a unique layered structure. However, the rapid combination of the electron-hole pairs generated in BiOBr leads to low photocatalytic activity, which limits its photocatalytic performance. Due to its unique electronic structure, BiOBr can be coupled with a variety of different functional materials to improve its photocatalytic performance. In this paper, We present the morphologically controllable BiOBr and its preparation process with the influence of raw materials, additives, solvents, synthesis methods, and synthesis conditions. Based on this, we propose design synthesis considerations for BiOBr-based nanocomplexes in four aspects: structure, morphology and crystalline phase, reduction of electron-hole pair complexation, photocorrosion resistance, and scale-up synthesis. The literature on BiOBr-based nanocomposites in the last 10 years (2012-2022) are summarized into seven categories, and the mechanism of enhanced photocatalytic activity of BiOBr-based nanocomposites is reviewed. Moreover, the applications of BiOBr-based nanocomposites in the fields of degradation of dye wastewater, antibiotic wastewater, pesticide wastewater, and phenol-containing wastewater are reviewed. Finally, the current challenges and prospects of BiOBr-based nanocomposites are briefly described. In general, this paper reviews the construction of BiOBr-based nanocomposites, the mechanism of photocatalytic activity enhancement and its research status and application prospects in the degradation of organic pollutants.

Interface engineering of p-p Z-scheme BiOBr/Bi12O17Br2 for sulfamethoxazole photocatalytic degradation

The Z-scheme heterojunction has received widespread attention due to it can effectively improve the photocatalytic activity of photocatalytic materials. In this paper, a p-p Z-scheme hererojunction composed of bismuth oxybromide and oxygen-rich bismuth oxybromide was synthesized via facile one-step solvothermal method. Based on the characterization results, we demonstrated that the BiOBr/B_i12O₁₇Br₂ Z-scheme heterojunction was synthesized by intimate interface contact between BiOBr and B_i12O₁₇Br₂ p-type semiconductors. This endowed the heterojunction composite with excellent photogenerated carrier transfer ability and photogenerated electron-hole separation performance compared with pure BiOBr and B_i12O₁₇Br₂ materials, which were proven by photoelectrochemical measurement, photoluminescence spectra. The maximum photocurrent of BiOBr/Bi₁₂O₁₇Br₂ (≈0.32 μA) is approximately 3 times that of the original BiOBr (≈0.08 μA ) when light is irradiated. In addition, the BiOBr/B_i12O₁₇Br₂ p-p Z-scheme composite photocatalyst had good photocatalytic activity for sulfamethoxazole, with ·O₂^- free radicals as the main active species. It could photodegrade 99% sulfamethoxazole under light irradiation at 365 nm, and its degradation rate was approximately 13 times that of BiOBr and 1.5 times that of B_i12O₁₇Br₂ materials. Notably, BiOBr/B_i12O₁₇Br₂ exhibited an excellent performance after 4 consecutive runs. Besides, the possible degradation pathway of sulfamethoxazole was proposed. This work has reference significance for the construction of p-p Z-scheme heterojunctions and the treatment of environmental contaminants.

Tuneable Phase, Morphology, and Performance of Bismuth Oxyhalide Photocatalysts via Microwave-Assisted Synthesis

In this study, a facile microwave-assisted synthesis approach was used to produce a series of bismuth oxyhalide photocatalysts, with systematic changes in synthesis pH between 1 and 14 allowing control over a broad range of material properties and characteristics. Detailed structural and morphological investigations with powder X-ray diffraction (PXRD), Rietveld refinements, pair distribution function (PDF) analysis, and scanning electron microscopy (SEM) show that thin particles of BiOCl, BiOBr, Bi24O31Cl10, and Bi24O31Br10 were selectively produced, with progressive changes in morphology, facet dominance, and phase as a function of pH. The impact of these changes on photocatalytic performance was evaluated by studying the aerobic oxidation of benzylamine to N-benzylidenebenzylamine, with all materials exhibiting photocatalytic abilities under UV or blue light. While a combination of material properties and characteristics influenced the photocatalytic performance, certain factors such as surface area, facet dominance, amorphous content, and band gap were found to have a larger impact on the photocatalytic yield. Overall, this study demonstrates the possibilities of phase, morphology, and performance of bismuth oxyhalide photocatalysts over the entire pH range, produced using a fast and facile microwave-assisted synthesis technique as an alternative to the more widely applied hydrothermal synthesis approach. Additionally, the detailed structural and morphological investigations of the materials contribute to a greater understanding of bismuth oxyhalide photocatalysts in general, while also highlighting some of the most desirable properties for improved photocatalytic performance of these materials.

Anchoring bismuth oxybromo-iodide solid solutions on flexible electrospun polyacrylonitrile nanofiber mats for floating photocatalysis

Constructing floating photocatalysts with highly efficient visible-light utilization is a promising approach for practical photocatalytic wastewater treatment. In this study, we anchored bismuth oxybromo-iodide (BiOBr_xI_1-x (0 ≤ x ≤ 1)) on flexible electrospun polyacrylonitrile (PAN) nanofiber mats to create BiOBr_xI_1-x@PAN nanofibers with tunable light absorption properties as floating photocatalysts at room temperature. As x increased, the photocatalytic activity of the BiOBr_xI_1-x@PAN nanofibers with similar loading content initially increased, and then decreased, for the degradation of bisphenol A (BPA) and methyl orange (MO) under visible-light irradiation (λ > 420 nm) conditions. The BiOBr_xI_1-x@PAN (0 < x < 1) nanofibers exhibited better photocatalytic performance compared to the BiOBr@PAN and BiOI@PAN nanofibers. Under visible-light irradiation, the BPA degradation rate of the BiOBr_0.5I_0.5@PAN nanofibers was 1.9 times higher than that of the BiOI@PAN nanofibers, while the BiOBr@PAN nanofibers had no noticeable degradation performance. The MO degradation rate of the BiOBr_0.5I_0.5@PAN nanofibers was 2.5 and 3.2 times higher than that of the BiOBr@PAN and BiOI@PAN nanofibers, respectively. The enhanced performance possibly originated from a balance between the light absorption and redox capabilities, along with efficient separation of electron-hole pairs in the BiOBr_0.5I_0.5@PAN nanofibers, as determined by ultraviolet-visible diffuse reflectance spectroscopy, X-ray photoelectron spectra analysis of the valence bands, and photocurrent response characterization. Compared to the powder structures, the BiOBr_xI_1-x@PAN nanofibers showed enhanced performance due to the excellent dispersion and immobilization of the BiOBr_xI_1-x solid solution, which provided more active sites during photocatalytic degradation. In addition, their flexible self-supporting structures allowed for floating photocatalysis near the water surface. They could be reused directly without separation and maximized the absorption of visible light during the photocatalytic reaction. Therefore, these solid-solution-based floatable nanofiber photocatalysts are good potential candidates for wastewater treatment applications.

Room temperature synthesis of BiOBr1-x I x thin films with tunable structure and conductivity type for enhanced photoelectric performance

The surface states of semiconductors determine the semiconductor type. Although BiOCI, BiOBr and BiOI all belong to the bismuth oxyhalide semiconductor family and have similar crystal structures and electronic structures, they exhibit different conductivity types due to their respective surface states. In this paper, a modified successive ionic layer adsorption and reaction (SILAR) method was developed to fabricate I-doped BiOBr_1-x I _x nanosheet array films on FTO substrates at room temperature for the first time. Interestingly, the properties of p-type BiOBr were changed by doping an appropriate amount of iodine into a BiOBr film to form an n-type BiOBr_1-x I _x thin film. The I-doped BiOBr_1-x I _x (x = 0.2, 0.4, 0.5) nanosheet arrays had a perfect single-crystal structure, and the dominant growth plane was (110). A higher doping amount of I led to a darker colour of the BiOBr_1-x I _x film and a redshift of the absorption wavelength; consequently, the bandgap value changed from 2.80 eV to 1.85 eV. The highest short-circuit current and open-circuit voltage of the solar cell based on BiOBr_0.5I_0.5 film could reach 1.73 mA cm^-2 and 0.55 V, which was considered to be attributed to the effective light absorbance, long photogenerated charge lifetime and sufficient charge separation in the BiOBr_0.5I_0.5 film.

Iodine ion doped bromo bismuth oxide modified bismuth germanate: A direct Z-scheme photocatalyst with enhanced visible-light photocatalytic performance

A series of Z-scheme I-BiOBr/Bi₁₂GeO₂₀ heterostructures were successfully obtained by a simple method. The Z-scheme I-BiOBr/Bi₁₂GeO₂₀ heterostructures show outstanding photocatalytic performance for degrading the various organic pollutants of the waste water. For degradation of Tetracycline (TC), the Z-scheme 30I-BiOBr/Bi₁₂GeO₂₀ heterostructure exhibits the superior rate constant, which is about 7.73 times, 3.52 times and 1.66 times higher than that of the pure Bi₁₂GeO₂₀, BiOBr and I-BiOBr, respectively. Meanwhile, as we expected, the Z-scheme 30I-BiOBr/Bi₁₂GeO₂₀ heterostructure also displays the enhanced photocatalytic perfomance for degradation of Ciprofloxacin (CIP), 2-Mercaptobenzothiazole (MBT) and reduction of aqueous Cr(VI). The enhancement of photocatalytic performance is attributed to the high redox capacity and the strong interfacial interaction between I-BiOBr and Bi₁₂GeO₂₀, which can effectively improve the separation of photo-induced electron-hole pairs. Additionally, the photocatalytic mechanism over the Z-scheme I-BiOBr/Bi₁₂GeO₂₀ heterostructure is provided. The research work may provide a promising approach to fabricate other Z-scheme heterostructures with efficient photocatalytic performance.

Preparation of BiF3/BiOBr heterojunctions from microwave-assisted method and photocatalytic performances

Novel BiF₃/BiOBr heterojunction photocatalysts were prepared from a fast and stable microwave-assisted method, and characterized by X-ray diffractometry, X-ray photoelectron spectroscopy, scanning electron microscopy, ultraviolet-visible spectroscopy and fluorescence spectroscopy. The photocatalytic activity of BiF₃/BiOBr heterojunctions under light irradiation was significantly higher than pure BiOBr or BiF₃, and was maximized at the Br:F molar ratio of 1:1, as the targeted 20 mg/L Rhodamine B (RhB) solution was completely degraded within 40 min. This was mainly because the unique BiF₃/BiOBr heterojunction formed during photocatalytic degradation accelerated the photoelectron and hole separation, effectively enhanced the quantum efficiency, and thereby strengthened the photocatalytic activity.

Mediation of band structure for BiOBrxI1−x hierarchical microspheres of multiple defects with enhanced visible-light photocatalytic activity

The band edge positions are of vital importance due to their direct effect on the redox reactions occurring at the surface of the samples.