Engineering an upconversion fluorescence sensing platform with "off-on" pattern through specific DNAzyme-mediated signal amplification for supersensitive detection of uranyl ion

An upconversion fluorescence sensing platform was developed with upconversion nanoparticles (UCNPs) as energy donors and gold nanoparticles (AuNPs) as energy acceptors, based on the FRET principle. They were used for quantitative detection of uranyl ions (UO22+) by amplifying the signal of the hybrid chain reaction (HCR). When UO22+ are introduced, the FRET between AuNPs and UCNPs can be modulated through a HCR in the presence of high concentrations of sodium chloride. This platform provides exceptional sensitivity, with a detection limit as low as 68 pM for UO22+ recognition. We have successfully validated the reliability of this method by analyzing authentic water samples, achieving satisfactory recoveries (89.00%-112.50%) that are comparable to those of ICP-MS. These results indicate that the developed sensing platform has the capability to identify trace UO22+ in complex environmental samples.

Tiny but mighty: metal nanoparticles as effective antimicrobial agents for plant pathogen control

Metal nanoparticles (MNPs) have gained significant attention in recent years for their potential use as effective antimicrobial agents for controlling plant pathogens. This review article summarizes the recent advances in the role of MNPs in the control of plant pathogens, focusing on their mechanisms of action, applications, and limitations. MNPs can act as a broad-spectrum antimicrobial agent against various plant pathogens, including bacteria, fungi, and viruses. Different types of MNPs, such as silver, copper, zinc, iron, and gold, have been studied for their antimicrobial properties. The unique physicochemical properties of MNPs, such as their small size, large surface area, and high reactivity, allow them to interact with plant pathogens at the molecular level, leading to disruption of the cell membrane, inhibition of cellular respiration, and generation of reactive oxygen species. The use of MNPs in plant pathogen control has several advantages, including their low toxicity, selectivity, and biodegradability. However, their effectiveness can be influenced by several factors, including the type of MNP, concentration, and mode of application. This review highlights the current state of knowledge on the use of MNPs in plant pathogen control and discusses the future prospects and challenges in the field. Overall, the review provides insight into the potential of MNPs as a promising alternative to conventional chemical agents for controlling plant pathogens.

Tiny but Mighty: Nanoscale Materials in Plant Disease Management

Nanoscale materials are promising tools for managing plant diseases and are becoming important players in the current agritech revolution. However, adopting modern methodologies requires a broad understanding of their effectiveness in solving target problems and their effects on the environment and food chain. Furthermore, it is paramount that such technologies are mechanistically and economically feasible for growers to adopt in order to be sustainable in the long run. This Feature Article summarizes the latest findings on the role of nanoscale materials in managing agricultural plant pathogens. Herein, we discussed the benefits and limitations of using nanoscale materials in plant disease management and their potential impacts on the environment and global food security.

Sensitive and selective colorimetric detection of Staphylococcus aureus-SPA gene by engineered gold nanosensor

Staphylococcal protein A (SPA) is an important virulence factor that enables Staphylococcus aureus to evade host immune responses. The current work aims to detect the S. aureus SPA gene by a colorimetric method based on gold nanoparticles (AuNPs). For this purpose, the chromosomal DNA of S. aureus was extracted. Thereafter, primers and thiolated oligonucleotide probe were designed based on protein A sequence data in the gene bank. PCR analysis was performed, and the PCR product was electrophoresed on 2 % agarose gel. Gold nanosensor (Au-Ns) was synthesized by the reaction between AuNPs and the thiolated oligonucleotide probe. The physicochemical properties of AuNPs and Au-Ns were characterized. The detection of the SPA gene was performed based on color change detected by the naked eye and UV-vis spectrophotometry. Finally, the described method was optimized and validated for standard, clinical, and food samples. The PCR analysis showed a characteristic fragment of the SPA gene with a molecular size of 545 base pairs (bp) and a detection limit of 60 pg/ µL. The physicochemical analyses illustrated Au-Ns' correct preparation with a zeta potential of -13.42 mV and particle size range 6-11 nm. Moreover, Au-Ns showed 100 % specificity with a detection limit (DL) of 6 fg/ µL. The proposed method was well described to be applied in clinical and research laboratories.

Ultrasensitive nano-gold labelled, duplex lateral flow immunochromatographic assay for early detection of sugarcane mosaic viruses

Sugarcane is one of the important food and bioenergy crops, cultivated all over the world except European continent. Like many other crops, sugarcane production and quality are hampered by various plant pathogens, among them viruses that infect systemically and cause severe impact to cane growth. The viruses are efficiently managed by their elimination through tissue culture combined with molecular diagnostics, which could detect virus titre often low at 10^-12 g mL^-1. To harmonize the virus diagnostics by molecular methods, we established a nanocatalysis-based high sensitive lateral flow immunochromatographic assay (LFIA) simultaneously to detect two major sugarcane viruses associated with mosaic disease in sugarcane. LFIA is known for poor sensitivity and stability with its signalling conjugates. However, we synthesized positively charged Cysteamine-gold nanoparticles and used them to prepare highly stable to sensitive immunoconjugates and as a colourimetric detection label. Further nanogold signal enhancement was performed on LFIA to obtain a high detection sensitivity, which is higher than the conventional immunoassays. The linear detection range of the nano-LIFA was 10^-6 to 10^-9 g mL^-1, and with the signal enhancement, the LOD reached up to 10^-12 g ml^-1. This research paper provides relative merits and advancement on nano-LFIA for specific detection of sugarcane viruses in sugarcane for the first time.

Synthesis of metal nanoclusters and their application in Hg2+ ions detection: A review

Mercuric (Hg²⁺) ions released from human activities, natural phenomena, and industrial sources are regarded as the global pollutant of world's water. Hg²⁺ ions contaminated water has several adverse effects on human health and the environment even at low concentrations. Therefore, rapid and cost-effective method is urgently required for the detection of Hg²⁺ ions in water. Although, the current analytical methods applied for the detection of Hg²⁺ ions provide low detection limit, they are time consuming, require expensive equipment, and are not suitable for in-situ analysis. Metal nanoclusters (MNCs) consisting of several to ten metal atoms are important transition missing between single atoms and plasmonic metal nanoparticles. In addition, sub-nanometer sized MNCs possess unique electronic structures and the subsequent unusual optical, physical, and chemical properties. Because of these novel properties, MNCs as a promising material have attracted considerable attention for the construction of selective and sensitive sensors to monitor water quality. Hence this review is focused on recent advances on synthesis strategies, and optical and chemical properties of various MNCs including their applications to develop optical assay for Hg²⁺ ions in aqueous solutions.

A Simplistic Single-Step Method for Preparing Biomimetic Nanoparticles from Endogenous Biomaterials

Many works utilize products isolated from nature as capping agents to functionalize gold nanoparticles for targeting and therapeutic applications. Some of the most advanced of these strategies utilize complex multicomponent biomaterials, such as whole cell-membranes, for nanoparticle functionalization strategies for evading or initializing immune response as well as for targeting. Strategies like these, wherein whole cell membrane is utilized for functionalization, take advantage of the complexity of the protein-lipid content and organization, which cells normally use for communication and interaction (instilling these capacities to nanoparticle vectors). Many approaches for achieving this in functionalizing the surface of nanoparticles rely on multistep processes, which necessitate the addition and then removal of synthetic molecules, heating, or pH modifications. These processes can have deleterious modifying effects on the functionalizing biomolecules, resulting in loss of product and time during each purification step, as well as potentially changing the biomolecule functionality toward a nondesirable effect. Here, we describe methods for forming gold nanoparticles at room temperature in a single step, functionalized with proteins, using nicotinamide adenine dinucleotide (NADH). This process enables formation of nanoparticles that can be functionalized by individual proteins (demonstrated with FBS) or whole cells membrane (extracted from B16F10 cells). This work is derivative from observations found in the literature by us and others, that mammalian cells are capable of producing gold nanoparticles from ionic gold without the supplementation of chemical species. The products of this single-step synthesis described herein have been optimized to maintain biomolecule integrity and so that there are no further purification steps required. To characterize the nanoparticles in terms of their shape, size, surface functionality, and biomolecule integrity throughout development, we employed light-based spectroscopy techniques, molecular modeling, electron microscopy, light scattering, and gel electrophoresis techniques. In order to compare the optimized biomolecule-functionalized nanoparticles against current standards (which require synthetic linkers, heating, or pH manipulation), we employed metabolic and live/dead assays as well as light-based microscopy/spectroscopy in vitro. In comparing our synthetic process against others for forming gold nanoparticles functionalized with complex biomolecule components (whole-cell membrane), we found that this process had superior particle internalization. Our strategy has similar outlets for application to these other works, however, because this process is entirely reliant on endogenous biomaterials and has additional potential.

Detection of Begomovirus in chilli and tomato plants using functionalized gold nanoparticles

Begomoviruses are a major class of Geminiviruses that affects most dicotyledonous plants and causes heavy economic losses to farmers. Early detection of begomovirus is essential to control the spread of the disease and prevent loss. Many available detection methods like ELISA, immunosorbent electron microscopy, PCR or qPCR require expertise in handling sophisticated instruments, complex data interpretation and costlier chemicals, enzymes or antibodies. Hence there is a need for a simpler detection method, here we report the development of a visual detection method based on functionalized gold nanoparticles (AuNP assay). The assay was able to detect up to 500 ag/µl of begomoviral DNA (pTZCCPp3, a clone carrying partial coat protein gene) suspended in MilliQ water. Screening of chilli plants for begomoviral infection by PCR (Deng primers) and AuNP assay showed that AuNP assay (77.7%) was better than PCR (49.4%). The AuNP assay with clccpi1 probe was able to detect begomoviral infection in chilli, tomato, common bean, green gram and black gram plants which proved the utility and versatility of the AuNP assay. The specificity of the assay was demonstrated by testing with total DNA from different plants that are not affected by begomoviruses.

Ultraviolet-induced in situ gold nanoparticles for point-of-care testing of infectious diseases in loop-mediated isothermal amplification

The present study investigated ultraviolet-induced in situ gold nanoparticles (AuNPs) coupled with loop-mediated isothermal amplification (LAMP) for the point-of-care testing (POCT) of two major infectious pathogens, namely, Coronavirus (COVID-19) and Enterococcus faecium (E. faecium spp.). In the process, gold ions in a gold chloride (HAuCl4) solution were reduced using trisodium citrate (Na3Ct), a reducing agent, and upon UV illumination, red-colored AuNPs were produced in the presence of LAMP amplicons. The nitrogenous bases of the target deoxyribonucleic acid (DNA) acted as a physical support for capturing gold ions dissolved in the sample. The high affinity of gold with the nitrogenous bases enabled facile detection within 10 min, and the detection limit of COVID-19 plasmid DNA was as low as 42 fg μL-1. To ensure POCT, we designed a portable device that contained arrays of reagent chambers and detection chambers. In the portable device, colorimetric reagents such as HAuCl4 and Na3Ct were contained in the reagent chambers; these reagents were subsequently transferred to the detection chambers where LAMP amplicons were present and thus allowed convenient sample delivery and multiplex detection. Owing to the high sensitivity of the in situ AuNPs, simplicity of portable device fabrication, and rapid colorimetric detection, we strongly believe that the fabricated portable device could serve as a kit for rapid POCT for instantaneous detection of infectious diseases, and could be readily usable at the bedside.

Intratumoral generation of photothermal gold nanoparticles through a vectorized biomineralization of ionic gold

Various cancer cells have been demonstrated to have the capacity to form plasmonic gold nanoparticles when chloroauric acid is introduced to their cellular microenvironment. But their biomedical applications are limited, particularly considering the millimolar concentrations and longer incubation period of ionic gold. Here, we describe a simplistic method of intracellular biomineralization to produce plasmonic gold nanoparticles at micromolar concentrations within 30 min of application utilizing polyethylene glycol as delivery vector for ionic gold. We have characterized this process for intracellular gold nanoparticle formation, which progressively accumulates proteins as the ionic gold clusters migrate to the nucleus. This nano-vectorized application of ionic gold emphasizes its potential biomedical opportunities while reducing the quantity of ionic gold and required incubation time. To demonstrate its biomedical potential, we further induce in-situ biosynthesis of gold nanoparticles within MCF7 tumor mouse xenografts which is followed by its photothermal remediation.

Dark-Field Microwells toward High-Throughput Direct miRNA Sensing with Gold Nanoparticles

MicroRNA (miRNA) is a class of short RNA that is emerging as an ideal biomarker, as its expression level has been found to correlate with different types of diseases including diabetes and cancer. The detection of miRNA is highly beneficial for early diagnostics and disease monitoring. However, miRNA sensing remains difficult because of its small size and low expression levels. Common techniques such as quantitative real-time polymerase chain reaction (qRT-PCR), in situ hybridization and Northern blotting have been developed to quantify miRNA in a given sample. Nevertheless, these methods face common challenges in point-of-care practice as they either require complicated sample handling and expensive equipment, or suffer from low sensitivity. Here we present a new tool based on dark-field microwells to overcome these challenges in miRNA sensing. This miniaturized device enables the readout of a gold nanoparticle assay without the need of a dark-field microscope. We demonstrate the feasibility of the dark-field microwells to detect miRNA in both buffer solution and cell lysate. The dark-field microwells allow affordable miRNA sensing at a high throughput which make them a promising tool for point-of-care diagnostics.

Scanometric Detection of Tomato Leaf Curl New Delhi Viral DNA Using Mono- and Bifunctional AuNP-Conjugated Oligonucleotide Probes

Scanometric detection of tomato leaf curl New Delhi viral DNA using AuNP-conjugated mono- and bifunctional oligo probes through direct DNA hybridization assay (DDH assay) and sandwich DNA hybridization assay (SDH assay) with silver enhancement was developed. Tomato leaf curl New Delhi virus (ToLCNDV) coat protein gene-specific thiol-modified ssoligo probes were used for the preparation of mono- and bifunctional AuNP-ssoligo probe conjugates (signal probes). ssDNA arrays were prepared using polymerase chain reaction (PCR), rolling circle amplification (RCA), genomic DNAs fragments, and phosphate-modified positive control/capture probes through 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide/1-methylimidazole conjugation on the amine-modified glass slide (GS) surface. In the DDH assay, signal probes were directly hybridized with ssDNA array of positive control and ToLCNDV DNA samples and the detection signals were amplified by silver enhancement. Dark black/gray colors were developed on the GS by the result of Ag enhancement, which can be visualized and discriminated by the naked eye. The images were captured using a simple flatbed scanner, and the determined amounts of signal probes were hybridized with their target DNA. Similarly, the SDH assay also performed through two rounds of hybridization between capture probes and target DNA; target DNA and signal probes followed by silver enhancement. The detection signals were found higher in the PCR sample than the RCA and genomic DNA samples because of the presence of increased copy numbers of complementary DNAs in PCR samples. Further, bifunctional AuNP-ssoligo probe shows higher intensity of detection signal than monofunctional probes because it can be hybridized with both strands of dsDNA targets. Moreover, the DDH-based scanometric method showed higher detection sensitivity than the SDH assay-based scanometric method. Overall, bifunctional signal probes showed more detection sensitivity than monofunctional probes in scanometric methods based on both DDH and SDH assays. The limit of detection of this developed scanometric method was optimized (100 zM to 100 pM concentration). Further, DDH assay-based scanometric method shows significant advantages over the SDH assay method, such as cost-effectiveness, because it requires only single probes (signal probes), less time-consuming by the need of only single-step hybridization, and higher detection sensitivity (up to zM). To the best of our knowledge, this is the first attempt made to develop a scanometric-based nanoassay method for the detection of plant viral DNA. This approach will be a remarkable milestone for the application of nanotechnology in the development of nanobiosensor for plant pathogen detection.

Colorimetric detection of nucleic acid sequences in plant pathogens based on CRISPR/Cas9 triggered signal amplification

A colorimetric method is presented for the detection of specific nucleotide sequences in plant pathogens. It is based on the use of CRISPR/Cas9-triggered isothermal amplification and gold nanoparticles (AuNPs) as optical probes. The target DNA was recognized and broken up by a given Cas9/sgRNA complex. After isothermal amplification, the product was hybridized with oligonucleotide-functionalized AuNPs. This resulted in the aggregation of AuNPs and a color change from wine red to purple. The visual detection limit is 2 pM of DNA, while a linear relationship exists between the ratio of absorbance at 650 and 525 nm and the DNA concentration in the range from 0.2 pM to 20 nM. In contrast to the previous CRISPR-based amplification platforms, the method has significantly higher specificity with the single-base mismatch and can be visually read out. It was successfully applied to identify the Phytophthora infestans genomic DNA. Graphical abstract Schematic presentation of a colorimetric method for detection of Phytophthora infestans genomic DNA based on CRISPR/Cas9-triggered isothermal amplification. The Cas9 endonuclease cleaves DNA at the design site and the color changes from red to purple with increasing target DNA concentration.

Localized surface plasmon resonance biosensing of tomato yellow leaf curl virus

Current techniques for plant virus detection, such as RT- PCR and ELISA, require multistep procedures and rely on sophisticated equipment. Due to the global spread of plant viruses, the development of simpler, faster and cheaper assay methods is inevitable. Gold nanoparticles (AuNPs) had raised much interest during recent years due to their novel optical properties or diagnostic purposes. The localized surface plasmon resonance (LSPR¹) of AuNPs had been used in the development of novel colorimetric nano-biosensing systems. The frequency and intensity of the LSPR peak generally depend on the shape, size and the surrounding medium of the AuNPs. In this study, unmodified AuNPs had been used to detect the unamplified Tomato yellow leaf curl virus (TYLCV) genome in infected plants. A specific DNA probe complementary to the coat protein region of virus genome was designed. The extracted total DNA of uninfected and infected plants was mixed with hybridization buffer and the designed probe. The mixture was denatured, annealed and then cooled to room temperature and was followed by AuNPs addition. The color changes in the samples indicating the presence of target virus infections were assessed visually after the addition of salt and confirmed by UV-Vis spectroscopy. The results showed that this strategy allowed for fast and sensitive detection of TYLCV genome and eliminated the need for PCR amplification and detection equipment.

Mannitol-induced gold nanoparticle aggregation for the ligand-free detection of viral particles

Addition of osmolytes causes viruses-coated AuNPs to aggregate and not protein-coated AuNPs. Ligand-free detection of virus was developed without the need for prior knowledge of the specific virus target.

Optical assays based on colloidal inorganic nanoparticles

Colloidal inorganic nanoparticles have wide applications in the detection of analytes and in biological assays. A large number of these assays rely on the ability of gold nanoparticles (AuNPs, in the 20 nm diameter size range) to undergo a color change from red to blue upon aggregation. AuNP assays can be based on cross-linking, non-cross linking or unmodified charge-based aggregation. Nucleic acid-based probes, monoclonal antibodies, and molecular-affinity agents can be attached by covalent or non-covalent means. Surface plasmon resonance and SERS techniques can be utilized. Silver NPs also have attractive optical properties (higher extinction coefficient). Combinations of AuNPs and AgNPs in nanocomposites can have additional advantages. Magnetic NPs and ZnO, TiO2 and ZnS as well as insulator NPs including SiO2 can be employed in colorimetric assays, and some can act as peroxidase mimics in catalytic applications. This review covers the synthesis and stabilization of inorganic NPs and their diverse applications in colorimetric and optical assays for analytes related to environmental contamination (metal ions and pesticides), and for early diagnosis and monitoring of diseases, using medically important biomarkers.

Tuning the Gold Nanoparticle Colorimetric Assay by Nanoparticle Size, Concentration, and Size Combinations for Oligonucleotide Detection

Gold nanoparticle (GNP)-based aggregation assay is simple, fast, and employs a colorimetric detection method. Although previous studies have reported using GNP-based colorimetric assay to detect biological and chemical targets, a mechanistic and quantitative understanding of the assay and effects of GNP parameters on the assay performance is lacking. In this work, we investigated this important aspect of the GNP aggregation assay including effects of GNP concentration and size on the assay performance to detect malarial DNA. Our findings lead us to propose three major competing factors that determine the final assay performance including the nanoparticle aggregation rate, plasmonic coupling strength, and background signal. First, increasing nanoparticle size reduces the Brownian motion and thus aggregation rate, but significantly increases plasmonic coupling strength. We found that larger GNP leads to stronger signal and improved limit of detection (LOD), suggesting a dominating effect of plasmonic coupling strength. Second, higher nanoparticle concentration increases the probability of nanoparticle interactions and thus aggregation rate, but also increases the background extinction signal. We observed that higher GNP concentration leads to stronger signal at high target concentrations due to higher aggregation rate. However, the fact the optimal LOD was found at intermediate GNP concentrations suggests a balance of two competing mechanisms between aggregation rate and signal/background ratio. In summary, our work provides new guidelines to design GNP aggregation-based POC devices to meet the signal and sensitivity needs for infectious disease diagnosis and other applications.

Cloning of BBTV (Banana Bunchy Top Virus) components and screening of BBTV using functionalized gold nanoparticles

Banana bunchy top virus (BBTV) affects all varieties of banana plants and causes heavy economic loss in most of the banana cultivating areas. The BBTV genome comprises of six DNA components; in this study, we have cloned the six BBTV-DNA components from one of the BBTV-infected plants (Tri-8) and were submitted to GenBank. Analysis of the BBTV DNA-R component showed that it belonged to south Pacific group. Resistance against BBTV has not been observed so far in banana plants and removal and killing of the infected plants has been routinely practiced. Hence, early detection of BBTV infection would be desirable and various detection methods routinely employed include enzyme linked immunosorbent assay (antigen-antibody based) and molecular-based methods such as polymerase chain reaction (PCR), qPCR, or LAMP PCR. Most of these methods require enzymes or antibodies for detection and hence are expensive. Here, we report a visual detection method (AuNP probe assay) using gold nanoparticles (AuNPs) functionalized with an ssDNA-thiolated probe (CR1). This method is based on the hybridization of the functionalized AuNPs with the target DNA (BBTV). In the AuNP probe assay, the functionalized AuNPs retains red colour when BBTV DNA is present, and in the absence of BBTV DNA, the colour of the functionalized AuNPs changes to purple when salt is added. The AuNP probe assay was compared with PCR for the detection of banana plants and it was found that AuNP probe assay was better than PCR in detecting BBTV infection (86.5% for AuNP probe assay and 65% for PCR). The AuNP probe assay was found to be highly specific to BBTV and was found to detect up to 1 pg/μl of the plasmid (pTZBBTri 4, BBTV DNA) mixed with healthy banana DNA.

Recent advances in plant-mediated engineered gold nanoparticles and their application in biological system

For biosynthesis of gold nanoparticles different parts of a plant are used as they contain metabolites such as alkaloids, flavonoids, phenols, terpenoids, alcohols, sugars and proteins which act as reducing agents to produce nanoparticles. They also act as capping agent and stabilizer for them. They are used in medicine, agriculture and many other technologies. The attention is therefore focussed on all plant species which have either aroma or colour in their leaves, flowers or roots for the synthesis of nanoparticles because they all contain such chemicals which reduce the metal ions to metal nanoparticles. The size and morphology of gold nanoparticles is dependent on the biogenic-synthetic route, incubation time, temperature, concentration and pH of the solution. In this review, we have discussed the latest developments for the fabrication of gold nanoparticles from herbal extract, their characterization by UV-vis., Fourier transform infrared spectroscopy, transmission electron microscopy, scanning electron microscopy, X-ray diffraction, atomic force microscopy, energy-dispersive X-ray spectroscopy, dynamic light scattering and Zeta Potential techniques. Their application in drug delivery, cancer treatment, catalysis and as antimicrobial agent has also been discussed.

DNA assembled metal nanoclusters: synthesis to novel applications

In this review, we have discussed the emergence of promising environmental-benign DNA assembled fluorescent metal nanoclusters and their unique electronic structures, unusual physical and chemical properties.